As contribuições da associação de Catadores de Junqueirópolis/SP (ACAJUNQ) no processo de educação ambiental

Pós-graduação em Geografia - FCT

Histometric analysis and topographic characterization of cp Ti implants with surfaces modified by laser with and without silica deposition

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknesses

Objective. This study aimed to investigate the influence of restoration thickness to the fracture resistance of adhesively bonded Lava (TM) Ultimate CAD/CAM, a Resin Nano Ceramic(RNC), and IPS e. max CAD ceramic.Methods. Polished Lava (TM) Ultimate CAD/CAM (Group L), sandblasted Lava (TM) Ultimate CAD/CAM (Group LS), and sandblasted IPS e.max CAD (Group ES) discs (n=8, phi=10 mm) with a thickness of respectively 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, and 3.0 mm were cemented to corresponding epoxy supporting discs, achieving a final thickness of 3.5 mm. All the 120 specimens were loaded with a universal testing machine at a crosshead speed of 1 mm/min. The load (N) at failure was recorded as fracture resistance. The stress distribution for 0.5 mm restorative discs of each group was analyzed by Finite Element Analysis (FEA). The results of facture resistances were analyzed by one-way ANOVA and regression.Results. For the same thickness of testing discs, the fracture resistance of Group L was always significantly lower than the other two groups. The 0.5 mm discs in Group L resulted in the lowest value of 1028 (112) N. There was no significant difference between Group LS and Group ES when the restoration thickness ranged between 1.0 mm and 2.0 mm. There was a linear relation between fracture resistance and restoration thickness in Group L (R = 0.621, P < 0.001) and in Group ES (R = 0.854, P < 0.001). FEA showed a compressive permanent damage in all groups.Significance. The materials tested in this in vitro study with the thickness above 0.5 mm could afford the normal bite force. When Lava Ultimate CAD/CAM is used, sandblasting is suggested to get a better bonding. (C) 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Predicting soluble solid content in intact jaboticaba [Myrciaria jaboticaba (Vell.) O. Berg] fruit using near-infrared spectroscopy and chemometrics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

First all-sky search for continuous gravitational waves from unknown sources in binary systems

We present the first results of an all-sky search for continuous gravitational waves from unknown spinning neutron stars in binary systems using LIGO and Virgo data. Using a specially developed analysis program, the TwoSpect algorithm, the search was carried out on data from the sixth LIGO science run and the second and third Virgo science runs. The search covers a range of frequencies from 20 Hz to 520 Hz, a range of orbital periods from 2 to similar to 2,254 h and a frequency-and period-dependent range of frequency modulation depths from 0.277 to 100 mHz. This corresponds to a range of projected semimajor axes of the orbit from similar to 0.6 x 10(-3) ls to similar to 6,500 ls assuming the orbit of the binary is circular. While no plausible candidate gravitational wave events survive the pipeline, upper limits are set on the analyzed data. The most sensitive 95% confidence upper limit obtained on gravitational wave strain is 2.3 x 10(-24) at 217 Hz, assuming the source waves are circularly polarized. Although this search has been optimized for circular binary orbits, the upper limits obtained remain valid for orbital eccentricities as large as 0.9. In addition, upper limits are placed on continuous gravitational wave emission from the low-mass x-ray binary Scorpius X-1 between 20 Hz and 57.25 Hz.

Structural and Electrochemical Properties of Lutetium Bis-Octachloro-Phthalocyaninate Nanostructured Films. Application as Voltammetric Sensors

Thin films of the bis[2,3,9,10,16,17,23,24-octachlorophthalocyaninate] lutetium(III) complex (LuPc2Cl32) have been prepared by the Langmuir-Blodgett and the Langmuir-Schaefer (LS) techniques. The influence of the chlorine substituents in the structure of the films and in their spectroscopic, electrochemical and sensing properties has been evaluated. The pi-A isotherms exhibit a monolayer stability greater than the observed in the unsubstituted analogue (LuPc2), being easily transferred to solid substrates, also in contrast to LuPc2. The LB and LS films present a linear growth forming stratified layers, monitored by UV-VIS absorption spectroscopy. The latter also revealed the presence of LuPc2Cl32 in the form of monomers and aggregates in both films. The FTIR data showed that the LuPc2Cl32 molecules present a non-preferential arrangement in both films. Monolayers of LB and LS were deposited onto 6 nm Ag island films to record surface-enhanced resonance Raman scattering (SERRS), leading to enhancement factors close to 2 x 10(3). Finally, LB and LS films deposited onto ITO glass have been successfully used as voltammetric sensors for the detection of catechol. The improved electroactivity of the LB and LS films has been confirmed by the reduction of the overpotential of the oxidation of catechol. The enhancement of the electrocatalytic effect observed in LB and LS films is the result of the nanostructured arrangement of the surface which increases the number of active sites. The sensors show a limit of detection in the range of 10(-5) mol/L.

Fácies e associação de fácies da formação Pirambóia na região de Descalvado/SP

The Pirambóia Formation is a lithostratigraphic unit of the Paraná Basin, positioned between the Corumbataí (lower) and Botucatu (upper) Formations on the eastern edge of the basin. This unit is focused by many studies due to its great importance as an essential component in the Guarani Aquifer System (SAG) and the petroleum system “Irati-Pirambóia”, as excellent reservoirs. The Pirambóia Formation is historically the subject of several controversies on issues like age, contact relationships with the upper unit and depositional paleoenvironment. Despite these aspects, the Pirambóia Formation is commonly taken to be of Triassic age and is considered a product of wet aeolian systems, with plenty of wet interdunes and subordinate fluvial facies. In this work, by using techniques such as facies analysis, depositional architecture and facies association, facies of this unit were characterized and their depositional paleoenvironment was inferred particularly in Jundu Mining, region of Descalvado in northeastern São Paulo. Techniques such as grain size and petrographic analyses, aimed to characterize this unit as a potential reservoir rock. Five facies were described for the Pirambóia Formation in the studied region: St, Sh, Sm, Sr and Gt facies, generated by sedimentary processes of the bottom load type, mostly under low flow regime (with exception for the Sh facies, which is formed by upper flow regime processes). In addition to that, four facies associations were recognized from the architectural elements, primarily contained within the main channel: complex channel bars, composed by foreset macroforms (FM), sandy bedforms (SB) and gravel bars and bedforms (GB); flood deposits, constituted by laminated sand sheets (LS); deposits of hyperconcentrated flows and eolian deposits. It was interpreted that the Pirambóia Formation in Descalvado (SP) is the record of the sedimentation of braided rivers, with dunes and interdunes deposits...

Avaliação da erosão hídrica, transporte de sedimentos e qualidade da água na bacia do córrego Monjolo Grande

Understanding the linkages between the natural elements is essential for being promoted the land use, occupation and sustainable management of environmental systems. Universal Soil Loss Equation (USLE), as a predictive model of erosion, is important to allowing the prevention of possible environmental impacts which may drastically interfere in natural or anthropic environments, as well as prevent potential financial wastes and even contribute to greater efficiency of agricultural production. This research will be working some USLE parameters, emphasizing topographic factor from Ribeirão Monjolo Grande watershed. Among the factors considered by the USLE, the Topographic Factor interferes directly in the erosive dynamic of a watershed because it involves variables related to hydrological processes that occur on it. In this research, were discussed different methods for obtaining the Topographic Factor (BERTONI e LOMBARDI NETO, 1985; MOORE e BURCH, 1986; DESMET E GOVERS, 1996) in GIS environment. After comparison between the methods, was indicated that best represents the conditions of geometry strand of the study area. Finally, other factors (R, K, C, P) considered by the USLE were obtained. The attainment of these parameters were guided by the use of geotechnologies, especially in Geographic Information Systems (GIS), with the assistance of secondary data and periodic field visits. The results obtained contributed to the understanding of hydrosedimentological dynamic in this area and serve as a viable strategy for studies of soil loss, aiming at developing consistent material for future researches about environmental planning and land management

Paradigma e metodologias da questão agrária: uma análise das ocupações de terras no Brasil com ênfase para o Pontal do Paranapanema-SP

A questão agrária é da essência do modo capitalista de produção. A existência ou não do campesinato nesse modo de produção é justamente o cerne da discussão. A questão agrária pode ser interpretada de diferentes formas, por meio de correntes teóricas ou até mesmo paradigmas, como o caso do Paradigma da questão Agrária e o Paradigma do Capitalismo Agrário. Neste trabalho procuro defender a ideia de que a questão agrária é um problema estrutural do capitalismo, atualizada conjunturalmente por diferentes elementos, sejam eles de cunho social, político ou econômico. Um destes elementos, destacado nesta pesquisa, é justamente a luta pela terra em escala nacional e regional. A criação e recriação do campesinato no Brasil tem se dado, principalmente, a partir da luta pela terra, materializada em ocupações, acampamentos e, conseqüente, criação de assentamentos rurais. Em escala nacional, discuto a diminuição das ocupações de terra e de novos acampamentos nos últimos anos, com o intuito de compreender as possíveis causas. Já, em escala regional, no Pontal do Paranapanema-SP, algumas mudanças no que diz respeito à mobilização das famílias semterra e a esporacidade da vida nos acampamentos são apresentadas a fim de colaborar com a discussão sobre a dinâmica, contemporaneidade e perspectiva da luta pela terra

Estimativa da erosão na microbacia do Córrego do Gambá no município de Monte Alto, SP

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Determination of lead in eye shadow and blush by high-resolution continuum source graphite furnace atomic absorption spectrometry employing directSolid sampling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Supramolecular arrangements of an organometallic forming nanostructured films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of implants with laser irradiated surface and silicate deposition

Objectives: the purpose of this study was to evaluate the surfaces of commercially pure titanium (cpTi) implants surface modified by laser beam (LS), by laser beam associated with sodium silicate deposition (SS) and compare them with surfaces modified by dual-acid etched (AS) and with machined surface (MS). Methods: thirty rabbits received two implants each (one for each tibia). After 30, 60 and 90 days postoperative, the implants were removed by reverse torque for biomechanical analysis and surfaces were analyzed by scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). Results: the mean values of reverse torque at 30, 60 and 90 days postoperative were respectively 24.60, 43.60 e 60.40 N.cm to MS, 43.00, 68.20 e 63.80 N.cm to AS group, 59.80, 76.60 e 78.00 N.cm to LS group and 63.00, 75.40 e 76.60 N.cm to SS group. At 30 days, LS and SS groups showed statistically significant difference (p<0.05) compared to the other groups. At 60 days, LS and SS groups showed statistically significant difference (p<0.05) when compared to MS. Conclusions: it was concluded that SL and SS implants' biomechanical and topographical properties increased bone-implant interaction when compared to the AS and MS implants.

Effect of diets with varying starch content on muscle glycogen concentrations during training and replenishment after highintensity exercise

Pós-graduação em Zootecnia - FCAV

O lulismo, os movimentos sociais e o lugar social da política

Arrisco comentários sobre a maioridade burguesa da política brasileira, algo reconhecido pelos mais exigentes mentores das políticas neoliberais, não só pela eficiência com que o lulismo faz a mediação entre os interesses do grande capital e os produtos incontornáveis do padrão de acumulação ora imposto: desemprego estrutural, fome e destruição ambiental. Sua maior arte é fazer tudo isso sem provocar qualquer mudança substantiva ao país historicamente marcado pela condição de colonialidade crônica, de desigualdade social endêmica, de sua posição pífia no ranking do mercado de bens de produção, da parca geração de tecnologias, da estabilidade débil da sua economia e política internas.