Formulação de grautes leves para a cimentação de poços de petróleo onshore

Grautes are dry mixes with hydraulic characteristics widely used in construction. This material comprises cement, mineral additives and dosed in accordance with the desired properties. The use of grautes in cementing oil wells potentially increases the precision in the composition of the mixture, since it is requires only the addition of the mixing water before its pumping. Such benefit may be availed in cementing wells since the formulations grautes meet the temperature and pressure characteristics typical of wells. The objective of this study is to evaluate the effect of adding different percentages of industrial minerals properties of light grautes for onshore oil wells. For the formulation of the employees were grautes light industrial minerals and waste minerals abundant in the Northeast, in addiction to Portland cement and chemical additives Special class. Grautes were formulated with densities between 1.55 g/cm3 (13.0 lb/gal) and 1.68 g/cm3 (14 lb/gal). Tests results showed that grautes with higher density in the range studied meet the specifications for cementation of shallow wells onshore. The compositions lighter can also be adjusted for applying the material in the cementation of oil wells

Utilização de nanosílica como aditivo estendedor para pastas cimentantes de baixa densidade destinadas à cimentação de poços petrolíferos

Cementing operations are conducted at different times of the well s life and they have high importance, because the functions are fundamental to keep good properties during a long life of the well, such as, maintain the mechanical stability of the well, to promote the isolation hydraulic and support the tubing. In some situations, the rocky zones have low fractures pressures and require the use of lightweight slurries to prevent the hydrostatic pressure in the formation is greater than the pressure of fracture. There are three ways to reduce the density of cement slurries: exterders water additives, microspheres and foamed slurries. The most used extender water additive is sodium bentonite, which is a clay with a good capacity of water absorption and expansion of its volume, the main disadvantage of this additive is the reduction of the strength. Currently, the use of nanoscale particles has received special attention, mainly because they get new functionalities. Following this trend, this paper aims to use a colloidal solution of nano-silica as an exterders water additives for use in oil wells. Slurries were designed with fixed 13lb/gal density and concentration of nano silica 0.1 gpc; 0.4 gpc; 0.7 and 1gpc, the influence of nano-silica was studied at these levels in isolation and combined varying concentrations of CaCl2,. Tests including rheology, stability, strength, thickening time, porosity and permeability. Besides the API tests, microstructural characterizations were performed after 28 days of the slurries, X-ray diffraction (XRD) and scanning electron microscopy (SEM)

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products

Evaluación de los patrones de movimiento en la competición para optimizar el proceso de entrenamiento en la élite del tenis de formación a partir de la tecnología GPS.

241 p.

Efeito da incorporação de diatomita na estabilidade e permeabilidade de compósitos cimentíceos espumados aplicados a poços de petróleo

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Galanin interacts with Neuropeptide Y Y1 receptor in the dentate gyrus of the hippocampus through GALR2/NPYY1R heterodimers

We have shown Galanin(GAL) and Neuropeptide Y Y1(NPYY1) interactions at behavioural, cellular and receptor levels through GALR2/NPYY1R heterodimers in the amygdala. The aim of this work was to analyze GAL/NPYY1R interactions in the Dentate Gyrus(DG) of the Hippocampus, using autoradiographic, in situ hybridization and in situ proximity ligation assay(PLA). Rats(n=6) were sacrificed 15 minutes or 5 hours after icv injections of GAL(3nmol) and DG sections were incubated with NPYY1R agonist [I125]-[Leu31,Pro34]PYY(25 pM) or NPYY1R-33PdATP specific probe, for autoradiography and in situ hybridization respectively. Autoradiograms were analyzed using NIH image analysis system and Student’s unpaired t-test was used. For PLA, DG sections were incubated with anti-GALR2 Rabbit(1:100) and anti-NPYY1R Goat(1:200). PLA signals were detected with PLA PLUS or MINUS probes for rabbit or goat/mouse antibodies. PLA signals were visualized by using a confocal microscope Leica TCS-SL confocal microscope(Leica). We observed that GAL significant increased the NPYY1R agonist [I125]-[Leu31,Pro34]PYY binding in the DG by 20% (p<0,05) and the NPYY1R mRNA expression in the granular layer of DG by 31% (p<0,001). Moreover, PLA-positive red clusters were found specifically in the polymorphic layer and subgranular zone of the DG. No PLA clusters were observed neither in the molecular layer of the DG nor in the corpus callosum, an area that seems to lack of GALR2 receptor. These results demonstrate a novel mechanism of interaction between GAL and NPY1R in the DG at receptor level, probably involving the formation of GALR2/NPYY1R heteroreceptor complexes. Study supported by Junta de Andalucia CVI6476.

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Galanin N-Terminal fragment (1-15) enhances the antidepressant effects of the 5-HT1A receptor agonist 8-OH-DPAT in the Forced Swimming Test.

Galanin and Galanin (1-15) [GAL(1-15)] are implicated in anxiety- and depression related behaviors. Moreover, Galanin modulates 5-HT1A receptor (5-HT1AR) function at autorreceptor and postsynaptic level in the brain. In this study, we have analysed the ability of GAL(1-15) to modulate the effects of the 8-OH-DPAT agonist in the Forced Swimming Test (FST). Groups of rats were assessed in the FST. In the first set of experiments, to evaluate the interactions of 8-OH-DPAT and GAL(1-15), rats received subcutaneously (s.c) the effective doses of 8-OH-DPAT (0.25mg/Kg) 60min before the test and intracerebroventricularly (icv) GAL(1-15)1nmol 15min before the tests alone or in combination. In the second set of experiments, groups of rats received s.c. 8-OH-DPAT (0.125mg/Kg), icv GAL(1-15) 1nmol and icv the GALR2 antagonist M871 3 nmol alone or in combination. The locomotor activity was analysed in the open field test. GAL(1-15) 1nmol enhanced the antidepressant-like effects mediated by the effective dose of the 8-OH-DPAT. GAL(1-15) significantly decreased the immobility (p<0.05) and climbing (p<0.05) and increased the swimming (p<0.01) behaviour induced by an effective dose of 8-OH-DPAT (0.25mg/Kg) in FST. Moreover, after coadministration of GAL(1-15) and threshold dose of 8-OH-DPAT (0.125mg/Kg) a significant decreased appeared in immobility (p<0.01) and climbing (p<0.01) and increased the swimming behavior (p<0.001) vs 8-OH-DPAT group. Moreover, M871 blocked completely this interaction. These results indicate that GAL(1-15) enhances the antidepressant effects induced by 8-OH-DPAT in the FST. These findings may give the basis for the development of novel therapeutic drugs. This study was supported by Junta de Andalucía CVI6476.

Estudo do comportamento de pastas compósitas cimento/sílica/poliuretana para poços de petróleo HPHT

Os poços HPHT atravessam zonas anormalmente pressurizadas e com altos gradientes de temperatura. Esses poços apresentam elevadas concentrações de tensões produzidas pelas operações de perfuração e fraturamento hidráulico, flutuações da pressão e temperatura, forças dinâmicas geradas durante a perfuração, formações inconsolidadas, entre outros aspectos, podendo resultar em falhas mecânicas na bainha de cimento. Tais falhas comprometem a estabilidade mecânica do poço e o isolamento das zonas produtoras de óleos e/ou gás. Para que operações corretivas não se façam necessárias, é preciso adequar as pastas às condições de cada poço. Sistemas de pastas de cimento para poços HPHT requerem um bom controle de suas propriedades termo-mecânicas. Visto que a temperaturas superiores a 110 oC (230 oF) o cimento, após alcançar um valor máximo de resistência, inicia um processo de perda de resistência (retrogressão). Para prevenir esse efeito substitui-se parcialmente o cimento Portland por sílica com objetivo de incrementar a reação pozolânica. Esta reação modifica a trajetória do processo natural de hidratação do cimento, o gel de silicato de cálcio hidratado (C-S-H) se converte em várias outras fases com maior resistência. Polímeros também são adicionados para proporcionar maior flexibilidade e agir como barreira à propagação de trincas desenvolvidas sob tensão. O presente trabalho teve como objetivo estudar o comportamento do sistema cimento/sílica/polímero quando submetido às condições de alta temperatura e alta pressão. Foram formuladas pastas de cimento puro, pastas contendo 40 % BWOC de sílica flour e pastas com diferentes concentrações de poliuretana (5 % a 25 %) e 40 % BWOC de sílica flour. O peso específico das pastas foi fixado em 1,87 g/cm3 (15,6 lb/gal). Os resultados demonstram que as resistências da pasta contendo 40% de sílica e das com adição de polímero foram muito superiores a da pasta de cimento puro, não ocorrendo o efeito da retrogressão. As pastas com polímero apresentaram um crescente aumento da tenacidade com o aumento da concentração da mesma, sendo assim capaz de suportar as tensões. Além de se manterem estáveis termicamente acima de 180 ºC. O sistema também apresentou excelentes resultados de filtrado, reologia, água livre, estabilidade e permeabilidade. Sendo assim, o mesmo mostrou ser aplicável a poços HPHT

Guía de prácticas sobre agrupación de datos y gráficos en estadística, con la calculadora CASIOFX 7400 para los estudiantes de la carrera de Matemáticas y Física de la Universidad de Cuenca

El presente trabajo titulado: Guía de Prácticas sobre Agrupación de Datos y Gráficos en Estadística, con la calculadora Casiofx-7400 para los estudiantes de la carrera de Matemáticas y Física de la Universidad de Cuenca tiene por objetivo crear una guía de prácticas, que sirva de apoyo a los estudiantes en el aprendizaje deEstadística. La guía consta de tres capítulos: Fundamentación Teórica, Análisis Estadístico y la Propuesta. En el primer capítulo se da conocer: el marco teórico el cual fundamenta este trabajo, basado en el enfoque constructivista como corriente pedagógica;la importancia de las guías didácticas como recurso en la acción educativa; el empleo de las TIC(tecnologías de la Información y Comunicación) dentro de las aulas de clase y los beneficios de la calculadora graficadora. En el capítulo dos: Análisis Estadístico; se presenta información recolectada mediante una encuesta. La información tabulada se muestra en tablas y gráficos estadísticos, seguido de sus respectivas interpretaciones, con la cual se da validez a ésta propuesta. En el tercer capítulo se desarrolla la guía de prácticas para el uso de la calculadora graficadoraCasiofx-7400GII para el aprendizaje de Agrupación de Datos y Gráficos en Estadística; enfocada en la corriente constructivista. La guía está dividida en tres apartados: 1. Conceptos básicos de Estadística y descripción de la calculadora graficadora. 2. Agrupación de datos. 3. Gráficos estadísticos. Para potenciar el uso de la calculadora graficadora dentro del aula de clase cada apartado contiene objetivos y evaluaciones.

Galanin and galanin fragment 1-15 modulate antidepressant responses by targeting 5-HT1AR-GALR heteroreceptor complexes of the ascending midbrain serotonin pathways.

Mood disorders, including depression and anxiety, are among the most prevalent mental illnesses with high socioeconomic impact. Although the underlying mechanisms have not yet been clearly defined in the last decade the importance of the role of neuropeptides, including Galanin (GAL), and/or their receptors in the treatment of stress-related mood disorders is becoming increasingly apparent. GAL is involved in mood regulation, including depression-related and anxiety-like behaviors. Activation of GALR1 and GALR3 receptors results in a depression like behavior while stimulation of GALR2 receptor leads to anti-depressant-like effects. Moreover, GAL modulates 5-HT1A receptors (5-HT1AR), a key receptor in depression at autoreceptor and postsynaptic level in the brain. This interaction can in part be due to the existence of GALR1-5-HT1AR heteroreceptor complexes in discrete brain regions [1]. Not only GAL but also the N-terminal fragments like GAL(1-15) are active in the Central Nervous System [2, 3]. Recently, we described that GAL(1-15) induces strong depression-related and anxiogenic-like effects in rats, and these effects were significantly stronger than the ones induced by GAL [4]. The GALR1-GALR2 heteroreceptor complexes in the dorsal hippocampus and especially in the dorsal raphe (DR), areas rich in GAL(1-15) binding sites [5] were involved in these effects [4, 6] and demonstrated also in cellular models. In the present study, we have analyzed the ability of GAL(1-15) to modulate 5-HT1AR located at postjunctional sites and at the soma-dendritic level in rats. We have analyzed the effect of GAL(1-15) on the 5-HT1AR-mediated response in a behavioral test of depression and the involvement of the GALR2 in these effects. GAL(1-15) enhanced the antidepressant effects induced by the 5-HT1AR agonist 8-OH-DPAT in the forced swimming test [7]. These effects were stronger than the ones induced by GAL. The mechanism of this action involved interactions at the receptor level in the plasma membrane with changes also at the transcriptional level. Thus, GAL(1-15) affected the binding characteristics as well as the mRNA level of 5-HT1AR in the dorsal hippocampus and DR. GALR2 was involved in these effects, since the specific GALR2 antagonist M871 blocked GAL(1-15) mediated actions at the behavioral and receptor level [7]. Furthermore, the results on the proximity ligation assay (PLA) in this work suggest the existence of GALR1-GALR2-5-HT1AR heteroreceptor complexes since positive PLA were obtained for both GALR1-5-HT1AR and GALR2-5-HT1AR complexes in the DR and hippocampus. Moreover the studies on RN33B cells, where GALR1, GALR2 and 5-HT1AR exist [4], also showed PLA-positive clusters indicating the existence of GALR1-5-HT1AR and GALR2-5-HT1AR complexes in these cells [7]. In conclusion, our results indicate that GAL(1–15) enhances the antidepressant effects induced by the 5-HT1AR agonist 8-OH-DPAT probably acting on GALR1-GALR2-5-HT1AR heteroreceptor located at postjunctional sites and at the soma-dendritic level. The development of new drugs specifically targeting these heteroreceptor complexes may offer a novel strategy for treatment of depression. This work has been supported by Junta de Andalucia CVI646 1. Borroto-Escuela, D.O., et al., Galanin receptor-1 modulates 5-hydroxtryptamine-1A signaling via heterodimerization. Biochem Biophys Res Commun, 2010. 393(4): p. 767-72. 2. Hedlund, P.B. and K. Fuxe, Galanin and 5-HT1A receptor interactions as an integrative mechanism in 5-HT neurotransmission in the brain. Ann N Y Acad Sci, 1996. 780: p. 193-212. 3. Diaz-Cabiale, Z., et al., Neurochemical modulation of central cardiovascular control: the integrative role of galanin. EXS, 2010. 102: p. 113-31. 4. Millon, C., et al., A role for galanin N-terminal fragment (1-15) in anxiety- and depression-related behaviors in rats. Int J Neuropsychopharmacol, 2015. 18(3). 5. Hedlund, P.B., N. Yanaihara, and K. Fuxe, Evidence for specific N-terminal galanin fragment binding sites in the rat brain. Eur J Pharmacol, 1992. 224(2-3): p. 203-5. 6. Borroto-Escuela, D.O., et al., Preferential activation by galanin 1-15 fragment of the GalR1 protomer of a GalR1-GalR2 heteroreceptor complex. Biochem Biophys Res Commun, 2014. 452(3): p. 347-53. 7. Millon, C., et al., Galanin (1-15) enhances the antidepressant effects of the 5-HT1A receptor agonist 8-OH-DPAT: involvement of the raphe-hippocampal 5-HT neuron system. Brain Struct Funct, 2016.

Formulação e caracterização de pastas espumadas por incorporação de ar e estabilizantes minerais

Cementing operations may occur at various stages of the life cycle of an oil well since its construction until its definitive abandonment. There are some situations in which the interest zones are depleted or have low fracture pressure. In such cases, the adoption of lowdensity cement slurries is an efficient solution. To this end, there are basically three ways to reduce the density of cement slurries: using microspheres, water extending additives or foamed cement. The objective of this study is to formulate, to study and to characterize lowdensity foamed cement, using an air entrainment surfactant with vermiculite or diatomite as water extenders and stabilizers. The methodology consists on preparation and evaluation of the slurries under the American Petroleum Institute (API) and the Brazilian Association of Technical Standards (ABNT) guidelines. Based on calculated densities between 13 and 15 ppg (1.559 and 1.799 g/cm3), the slurries were prepared with fixed surfactant concentration, varying the concentrations of vermiculite and diatomite and were compared with the base slurries. The results of plastic viscosity, yield point and gel strength and the compressive strength for 24 h showed that the slurries presented suitable rheology and mechanical strength for cementing operations in oil wells, and had their densities reduced between 8.40 and 11.89 ppg (1.007 and 1.426 g/cm3). The conclusion is that is possible, under atmospheric conditions, to obtain light weighted foamed cement slurries with satisfactory rheological and mechanical properties by means of air entrainment and mineral additions with extenders and stabilizers effects. The slurries have great potential for cementing operations; applicability in deep wells, in low fracture gradient formations and in depleted zones and bring cost savings by reducing the cementing consumption

Desenvolvimento de pastas leves utilizando incorporadores de ar para aplicação em poços de petróleo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Galanin n-terminal gragment (1-15) modifies the 5-HT1A receptor against [H3]-8-OH-DPAT binding in the dorsal raphe and hippocampus of the rat

We have described that Galanin N-terminal fragment (1-15) [GAL(1-15)] is associated with depressive effects and also modulates the antidepressant effects induced by the 5-HT1A receptor (5-HT1AR) agonist 8-OH-DPAT. The aim of this study is to analyze the ability of GAL(1-15) to modulate 5-HT1AR at the autoreceptor and postsynaptic receptor level in rats by using quantitative autoradiography. We analyzed the effect of intracerebroventricular GAL(1-15)-3nmol (n=6) or aCSF (n=6), 10 minutes, 2 and 5 hours after the injection, on the binding characteristics of the 5-HT1AR agonist [H3]-8-OH-DPAT in sections of the Dorsal Raphe (DR) and Dorsal Hippocampus, specifically CA1 and Dentate Gyrus (DG). Student’s t-test was used to compare the experimental groups. GAL(1-15) produced a time-dependent effect on the binding of [H3]-8-OH-DPAT. In CA1 and DG, a significant increase in the KD and Bmax was observed, by 90%(p<0.05), at 10 minutes and 2 hours after injection. However, 5 hours after GAL(1-15) the only significant change remaining was the increase in Bmax at the DG. The coinjection of the GALR2 antagonist M871 blocked significantly the effects induced by GAL(1-15) in both areas. In DR, 2 hours after injection GAL(1-15) only produced a decrease in the Bmax by 20%(p<0.05). These results indicate that GAL(1-15) interacts with 5-HT1AR at the receptor level in DR and Dorsal Hippocampus. Therapeutic strategies based on these results could be developed for the treatment of depression disorders. This work has been supported by Junta de Andalucia CVI646 and Spanish Ministry of Economy PSI2013-44901-P.

Estudo da formulação de pré-misturas secas para a cimentação de poços em terra

An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths