Impact of energy-using product policies

Energy-using products (EuPs), such as domestic appliances, audio-visual and ICT equipment contribute significantly to CO2 emissions, both in the domestic and non-domestic sectors. Policies that encourage the use of more energy efficient products can therefore generate significant reductions in overall energy consumption and hence, CO2 emissions. To the extent that these policies cause an increase the average production cost of EuPs, they may impose economic costs on producers, or on consumers, or on both. In this theoretical paper, an adaptation of a simple vertical product differentiation model – in which products are characterised in terms of their quality and their energy consumption – is used to analyse the impact of the different EuP polices on product innovation and to assess the resultant economic impacts on producers and consumers. It is shown that whereas the imposition of a binding product standard for energy efficiency unambiguously reduces aggregate profit and increases the average market price in the absence of any learning effects, the introduction or strengthening of demand-side measures (such as energy labelling) may reduce, or increase, aggregate profit. Even in the case where the overall impact is unambiguously negative, the effects of product innovation and learning can be in either direction.

Product innovation and the costs of energy-using product policies

Energy-using Products (EuPs) contribute significantly to the United Kingdom’s CO2 emissions, both in the domestic and non-domestic sectors. Policies that encourage the use of more energy efficient products (such as minimum performance standards, energy labelling, enhanced capital allowances, etc.) can therefore generate significant reductions in overall energy consumption and hence, CO2 emissions. While these policies can impose costs on the producers and consumers of these products in the short run, the process of product innovation may reduce the magnitude of these costs over time. If this is the case, then it is important that the impacts of innovation are taken into account in policy impact assessments. Previous studies have found considerable evidence of experience curve effects for EuP categories (e.g. refrigerators, televisions, etc.), with learning rates of around 20% for both average unit costs and average prices; similar to those found for energy supply technologies. Moreover, the decline in production costs has been accompanied by a significant improvement in the energy efficiency of EuPs. Building on these findings and the results of an empirical analysis of UK sales data for a range of product categories, this paper sets out an analytic framework for assessing the impact of EuP policy interventions on consumers and producers which takes explicit account of the product innovation process. The impact of the product innovation process can be seen in the continuous evolution of the energy class profiles of EuP categories over time; with higher energy classes (e.g. A, A+, etc.) entering the market and increasing their market share, while lower classes (e.g. E, F, etc.) lose share and then leave the market. Furthermore, the average prices of individual energy classes have declined over their respective lives, while new classes have typically entered the market at successively lower “launch prices”. Based on two underlying assumptions regarding the shapes of the “lifecycle profiles” for the relative sales and the relative average mark-ups of individual energy classes, a simple simulation model is developed that can replicate the observed market dynamics in terms of the evolution of market shares and average prices. The model is used to assess the effect of two alternative EuP policy interventions – a minimum energy performance standard and an energy-labelling scheme – on the average unit cost trajectory and the average price trajectory of a typical EuP category, and hence the financial impacts on producers and consumers.

Cross-Industry Product Diversification and Contagion in Risk and Return: The Case of Bank-Insurance and Insurance-Bank Takeovers

We investigate the impact of domestic/international bancassurance deals on the risk-return profiles of announcing and non-announcing banks and insurers within a GARCH model. Bank-insurance deals produce intra- and inter-industry contagion in both risk and return, with larger deals producing greater contagion. Bidder banks and peers experience positive abnormal returns, with the effects on insurer peers being stronger than those on bank peers. Insurance-bank deals produce insignificant excess returns for bidder and peer insurers and positive valuations for peer banks. Following the deal, the bank bidders’ idiosyncratic (systematic) risk falls (increases), while insurance bidders exhibit a lower systematic risk and maintain their idiosyncratic risk.

Integrating Social Knowledge and Collaboration Tools into Dispersed Product Development

Employee collaboration and knowledge sharing is vital for manufacturing organisations wishing to be successful in an ever-changing global market place; Product Development (PD) teams, in particular, rely heavily on these activities to generate innovative designs and enhancements to existing product ranges. To this end, the purpose of this paper is to present the results of a validation study carried out during an Engineering Education Scheme project to confirm the benefits of using bespoke Web 2.0-based groupware to improve employee collaboration and knowledge sharing between dispersed PD teams. The results of a cross-sectional survey concluded that employees would welcome greater usage of social computing technologies. The study confirmed that groupware offers the potential to deliver a more effective collaborative and knowledge sharing environment with additional communication channels on offer. Furthermore, a series of recommended guidelines are presented to show how PD teams, operating in globally dispersed organisations, may use Web 2.0 tools to improve employee collaboration and knowledge sharing.

A Fuzzy-Wavelet Neural Network Model for the Detection of Meat Spoilage using an Electronic Nose

Food product safety is one of the most promising areas for the application of electronic noses. The performance of a portable electronic nose has been evaluated in monitoring the spoilage of beef fillet stored aerobically at different storage temperatures (0, 4, 8, 12, 16 and 20°C). This paper proposes a fuzzy-wavelet neural network model which incorporates a clustering pre-processing stage for the definition of fuzzy rules. The dual purpose of the proposed modeling approach is not only to classify beef samples in the respective quality class (i.e. fresh, semi-fresh and spoiled), but also to predict their associated microbiological population directly from volatile compounds fingerprints. Comparison results indicated that the proposed modeling scheme could be considered as a valuable detection methodology in food microbiology

Global nation product equity depending on a level of cultural diffusion

Purpose This paper aims to propose the global nation product equity model (GNPE) to measure global consumers’ equity of a product that a country produces, especially a nation’s cultural products (i.e. culducts). The model also examines the significant difference of GNPE depending on a cultural diffusion level. GNPE model proposes that depending on the level of people’s recognition/acceptance/preference of a culture from another country (i.e. cultural diffusion level), the equity of a product from that country could be different in different countries. As variables that affect GNPE, global nation product equity in general, global nation product equity of a product category and nation cultural equity are included in the model. Design/methodology/approach To test the model, this study developed Hallyu (Korean cultural diffusion)-related Korean culducts and measured global consumers’ equity for the Korean culducts. In all, 351 surveys were collected from China, France, England and the USA. Findings The results show the significantly different equities and relationships among equities depending on the level of Hallyu diffusion in each country. Therefore, Korea is suggested to focus on different equities in different countries. Originality/value This research proposed a new model that extends the previous brand equity models to non-branded products (i.e. cultural products). This model proposed new variables that affect equity of a product mentioned above and suggests different equities to improve in different countries depending on their level of cultural diffusion. Also, this cross-cultural study suggests a direction of culduct design, distribution and promotion strategies in the global market.

Determination of carbamate and urea pesticide residues in fresh vegetables using microwave-assisted extraction and liquid chromatography

An analytical multiresidue method for the simultaneous determination of seven pesticides in fresh vegetable samples, namely, courgette (Cucurbita pepo), cucumber (Cucumis sativus), lettuce (Lactuca sativa, Romaine and Iceberg varieties) and peppers (Capsicum sp.) is described. The procedure, based on microwave-assisted extraction (MAE) and analysis by liquid chromatography– photodiode array (LC–PDA) detection was applied to four carbamates (carbofuran, carbaryl, chlorpropham and EPTC) and three urea pesticides (monolinuron, metobromuron and linuron). Extraction solvent and the addition of anhydrous sodium sulphate to fresh vegetable homogenate before MAE were the parameters optimised for each commodity. Recovery studies were performed using spiked samples in the range 250–403 µgkg- 1 in each pesticide. The pesticide residues were extracted using 20mL acetonitrile at 60 ºC, for 10 min. Acceptable recoveries and RSDs were attained (overall average recovery of 77.2% and RSDs are lower than 11%). Detection limits ranged between 5.8 µgkg- 1 for carbaryl to 12.3 µgkg- 1 for carbofuran. The analytical protocol was applied for quality control of 41 fresh vegetable samples bought in Oporto Metropolitan Area (North Portugal). None of the samples contained any detectable amounts of the studied compounds.

Employment of the side product of biodiesel production in the formation of surfactant like molecules

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Química e Bioquímica

ECO: argamassas de cal hidráulica para reabilitação de edifícios

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Otimização energética da máquina de impregnar telas para pneus

Este trabalho realizou-se na empresa Continental – Indústria Têxtil do Ave, S.A (CITA) em colaboração com a empresa Cofely GDF Suez – Energia e Serviços Portugal, S.A. O principal objetivo desta dissertação foi a otimização energética da máquina de impregnar telas para pneus – a máquina ZELL, tendo em conta as principais utilidades envolvidas: eletricidade e gás natural. Deste modo foi feito um levantamento prévio das condições de operação desta máquina relativamente às telas mais representativas da produção da empresa. Tendo-se verificado que as telas em poliéster representam 65% da produção total da máquina ZELL. Para este tipo de produto, foi feita uma análise dos consumos energéticos anuais para avaliar qual das utilidades referidas corresponde à maior parcela energética. Verificou-se que o consumo de gás natural representa a maior parcela da fatura energética anual da empresa correspondendo a 47%. Além disso, da energia total consumida anualmente pela ZELL, que corresponde a 1360 tep, 32% é relativo à energia elétrica e os restantes 68% ao consumo de gás natural. Por fim, procedeu-se à otimização energética estudando as alterações possíveis no sentido de reduzir os consumos energéticos da máquina, sem prejuízo da qualidade do produto final. Para isso propôs-se a instalação de permutadores de fluxo cruzado para pré-aquecer quer o ar fresco quer o ar de combustão. A implementação desta medida tem um período de retorno à volta de três anos e pode levar a uma poupança anual entre 1.359.639 kWh e 2.370.114 kWh para o ar fresco e 393.523 kWh e 639.475 kWh para o ar de combustão.

Derivation and consistency checking of models in early software product line engineering

Dissertação para obtenção do Grau de Doutor em Engenharia Informática

Business concept design of an innovative product: Partnership between Nmusic and Rovio Entertainment Ltd.

Field Lab in Entrepreneurial Innovative Ventures

How can clusters help in the product type choice? The case of a specialized retail store

This work project (WP) is a study about a clustering strategy for Sport Zone. The general cluster study’s objective is to create groups such that within each group the individuals are similar to each other, but should be different among groups. The clusters creation is a mix of common sense, trial and error and some statistical supporting techniques. Our particular objective is to support category managers to better define the product type to be displayed in the stores’ shelves by doing store clusters. This research was carried out for Sport Zone, and comprises an objective definition, a literature review, the clustering activity itself, some factor analysis and a discriminant analysis to better frame our work. Together with this quantitative part, a survey addressed to category managers to better understand their key drivers, for choosing the type of product of each store, was carried out. Based in a non-random sample of 65 stores with data referring to 2013, the final result was the choice of 6 store clusters (Figure 1) which were individually characterized as the main outcome of this work. In what relates to our selected variables, all were important for the distinction between clusters, which proves the adequacy of their choice. The interpretation of the results gives category managers a tool to understand which products best fit the clustered stores. Furthermore, as a side finding thanks to the clusterization, a STP (Segmentation, Targeting and Positioning) was initiated, being this WP the first steps of a continuous process.