Pressure induced polymorphous crystallization in bulk Ge20Te80 glass

The pressure and temperature dependence of the electrical resistivity of bulk glassy Ge20Te80 is reported. The effect of annealing is also studied. The glass undergoes a polymorphous or congruent crystallization under high pressures. The high pressure phase is found to have fcc structure with Image . Under thermal treatment the glass undergoes the double stage crystallization. The sample annealed at the first crystallization temperature shows a pressure induced semiconductor-to-metal transition at 4.0 GPa pressure and the crystalline Ge20Te80 samples show the transition at 7 GPa pressure.

Management of mould mite Tyrophagus putrescentiae (Schrank) (Acarina: Acaridae): A case study in stored animal feed

An integrated pest management (IPM) strategy was developed to manage infestations of mould mite Tyrophagus putrescentiae (Schrank) in stored animal feed, due to the increasing importance of these mites as pests of feed processing and storage facilities in Australia. This strategy involved several aspects such as limiting the moisture content of the processed feed to 12%, admixing vegetable oil to some feed (2% w/w), strict hygiene practice in and around the processing and storage facility, and rejection of infested grain at the receiving point. Additionally, seven contact insecticides and the fumigant phosphine were evaluated for their effectiveness against the mould mite to assess their potential integration into the IPM strategy. Among them, pyrethrin synergised with piperonyl butoxide, the insect growth regulator s-methoprene and a newly developed bacterium-based material spinosad controlled the mites. Moreover, the fumigant phosphine at 1 mg/litre over a six days exposure period also controlled these mites. So far, the IPM strategy, without any involvement of insecticides or fumigant has resulted in a complete eradication of the mite population in this particular case of stored animal feed.

Laboratory information management software for genotyping workflows: Applications in high throughput crop genotyping

Background: With the advances in DNA sequencer-based technologies, it has become possible to automate several steps of the genotyping process leading to increased throughput. To efficiently handle the large amounts of genotypic data generated and help with quality control, there is a strong need for a software system that can help with the tracking of samples and capture and management of data at different steps of the process. Such systems, while serving to manage the workflow precisely, also encourage good laboratory practice by standardizing protocols, recording and annotating data from every step of the workflow Results: A laboratory information management system (LIMS) has been designed and implemented at the International Crops Research Institute for the Semi-Arid Tropics (ICRISAT) that meets the requirements of a moderately high throughput molecular genotyping facility. The application is designed as modules and is simple to learn and use. The application leads the user through each step of the process from starting an experiment to the storing of output data from the genotype detection step with auto-binning of alleles; thus ensuring that every DNA sample is handled in an identical manner and all the necessary data are captured. The application keeps track of DNA samples and generated data. Data entry into the system is through the use of forms for file uploads. The LIMS provides functions to trace back to the electrophoresis gel files or sample source for any genotypic data and for repeating experiments. The LIMS is being presently used for the capture of high throughput SSR (simple-sequence repeat) genotyping data from the legume (chickpea, groundnut and pigeonpea) and cereal (sorghum and millets) crops of importance in the semi-arid tropics. Conclusions: A laboratory information management system is available that has been found useful in the management of microsatellite genotype data in a moderately high throughput genotyping laboratory. The application with source code is freely available for academic users and can be downloaded from http://www.icrisat.org/bt-software-d-lims.htm

Onko varhaisen tuen päiväkoti mahdollinen? : Tutkimus varhaiskasvatuksen yhteisöllisestä kehittämisestä

Is the early childhood day care facility possible? The research considering communal development of the early education. In Finland mothers and fathers look after 400 000 pre-school children. Half of these attend day care facilities, in which 50 000 staff are employed. The aim of this research is to develop co-operation practices within the day care centre. This research refines and expands my own interest in and knowledge of day care management and content development. The basis of the research draws upon ethnographic material covering the period 1999–2005. The day care centre chosen as a central informant was the first suburban centre founded in 1963, and it provided a rich local and welfare state research perspective. It became clear that the day care facility’s co-operation practices formed the basis of bringing up children and at the same time produced a new multi-operational and multi-layered community for child participation. Adult day care centre workers bringing up the children as a professional work and solutions defining the conditions for the work are expressed in a child’s upbringing. This obviously has an impact in where as the development of communities. From the human and community scientific point of view, the group of youngest children will take up a future position as key players in communities as essential actors and reformers. The research was carried out as multiphase and multiscientific practical research and iterative data formation. The results verified that the co-operation between parents and day care staff produces important benefits for all the stakeholders. However, the day care staff has difficulties in implementing the benefits. During the research process, it became clear that conceptually day care staff saw the practices as ”very important, but not easily realised in practice”. As a result this demanded further research to address this issue and to extend this to the carefacility’s co-operation practises and their communal and social conditions. The research looks at the carefacility’s co-operation with key stakeholders. At the same time it undertakes an analytical and historical examination of carefacilitys’s with an experimental focus as two day care centres chosen as experimental objects. The results of the research showed that the benefits gained by children were determined by the day care centre’s socio-political structure and the parent’s resources. The research framework categorised early childhood education as generational and gender based structures. As part of the research, the strains endemic to these formations have been examined. The system for bringing up children was created as part of a so called welfare state project by implemented by the Day Care Act in year 1973. The law secured the subjective right for every pre-school child to have access to day care facilities. The law also introduced a labour and sosiopolitical phase and the refinement of the day care facility’s education-care concept. The latest phase that started during the early 1990´s was called the market-based social services strategy. As a result of this phase, state support was limited and the screening function of the law was relaxed. This new strategy resulted in a divisive and bureaucratic social welfare system, that individualised and segregated children and their parents, leaving some families outside the communal and welfare state benefit net. The modern day care centre is a hybrid of different aims. Children spend longer and more irregular time in day care. The families are multicultural and that requires more training for the staff. The work in day care has been enhanced, for example he level of education for the staff has been lowered and productivity has been improved. However, administrative work and different kinds of support and net work functions together with the continuous change have taken over from the work done face to face with children. Staff experiences more pressure as the management and the work load has increased. Consequently the long-term planning and daily implementation of the nuclear task of the day care facility is difficult to control. This will have an effect on both motivation and manageability of the work. Overall quality of the early childhood upbringing has been weakened. The possibilities for the near future were tested in the two day care centres chosen as an experi-ment objects. The analysis of these experiments showed that generative interaction work will benefit everyone: children, parents and employees. The main results of the research are new concepts of an early support day care centre, which can be empirically and theoretically possi-ble for development the near future. Key words: Day care facility’s co-operation practises, early childhood education as generational structure, child’s multi-operational and multi-layered community, multi-subjective operator, generative interaction work, communal composition.

Finnish seniors’ move to a senior house: Examining the push and pull factors

The purpose of this article is to explore the factors influencing residential decisions of Finnish seniors. Analysis draws on qualitative data gathered from in-depth interviews and open-ended survey questions completed by 37 seniors living in three independent living facilities in Finland. Content analysis was used to identify key factors pushing residents out of their former living situations and pulling them into their respective independent living facility. Analysis indicates that different senior houses attract different types of residents. Nevertheless, as a group, they reported similar motivational factors relating to community, physical, and social environments and to their personal circumstances.

The host range and biology of Cometaster pyrula; a biocontrol agent for Acacia nilotica subsp. indica in Australia

Prickly acacia, Acacia nilotica subsp. indica (Benth.) Brenan, a major weed of the Mitchell Grass Downs of northern Queensland, Australia, has been the target of biological control projects since the 1980s. The leaf-feeding caterpillar Cometaster pyrula (Hopffer) was collected from Acacia nilotica subsp. kraussiana (Benth.) Brenan during surveys in South Africa to find suitable biological control agents, recognised as a potential agent, and shipped into a quarantine facility in Australia. Cometaster pyrula has a life cycle of approximately 2 months during which time the larvae feed voraciously and reach 6 cm in length. Female moths oviposit a mean of 339 eggs. When presented with cut foliage of 77 plant species, unfed neonates survived for 7 days on only Acacia nilotica subsp. indica and Acacia nilotica subsp. kraussiana. When unfed neonates were placed on potted plants of 14 plant species, all larvae except those on Acacia nilotica subsp. indica and Acacia nilotica subsp. kraussiana died within 10 days of placement. Cometaster pyrula was considered to be highly host specific and safe to release in Australia. Permission to release C. pyrula in Australia was obtained and the insect was first released in north Queensland in October 2004. The ecoclimatic model CLIMEX indicated that coastal Queensland was climatically suitable for this insect but that inland areas were only marginally suitable.

Low-frequency dielectric constant measurements in the critical polar + non-polar binary liquid system: Methanol + n-heptane

The low-frequency (5–100 kHz) dielectric constant ε has been measured in the temperature range 7 × 10−5 < T = (T − Tc)/Tc < 8 × 10−2. Near Tc an exponent ≈0.11 characterizes the power law behaviour of dε/dt consistent with the theoretically predicted t−α singularity. However, over the full range of t an exponent ≈0.35 is obtained.

A simple firing delay control circuit for bridge converters

A simple ramp control firing circuit, suitable for use with fully controlled, line-commutated thyristor bridge circuits, is discussed here. This circuit uses very few components and generates the synchronized firing pulses in a simple way. It operates from a single 15 V Supply and has an inherent pulse inhibit facility. This circuit provides the synchronized firing pulses for both thyristors of the same limb in a bridge. To ensure reliability, wide triggering pulses are used, which are modulated to pass through the pulse transformers1 and demodulated before being fed to the thyristor gates. The use of throe such circuits only for a three-phase bridge is discussed.

Determining and quantifying components of an aquaculture soundscape.

Recirculating aquaculture systems have a unique anthropogenic-based soundscape which is characterized by the type of equipment utilized, the structural configuration of walls, tanks, equipment, the substrate the tanks are situated on and even the activities of the personnel operating the facility. The soundscape of recirculation facilities is inadequately understood and remains poorly characterized, although it is generally accepted that the dominant sounds found in such facilities are within the hearing range of fish. The objective of this study was to evaluate the soundscape in a recirculating aquaculture facility from an intra-tank perspective and determine how the soundscape is shaped by a range of characteristics within the facility. Sounds were recorded across an operating aquaculture facility including different tank designs. The sounds recorded fell within previously measured pressure level ranges for recirculating systems, with the highest maximum sound pressure level (SPL) recorded at 124 dB re 1 mu Pa-2/Hz (with an FFT bin width of 46.9 Hz, centered at 187.5 Hz). The soundscape within the tanks was stratified and positively correlated with depth, the highest sound pressure occurring at the base of the tanks. Each recording of the soundscape was dominated by a frequency component of 187.5 Hz (corresponding centre of the 4th 46.9 Hz FFT analysis bin) that produced the highest observed SPL Analysis of sound recordings revealed that this peak SPL was associated with the acoustic signature of the pump. The soundscape was also evaluated for impacts of tank hood position, time of day, transient sounds and airstone particle size types, all of which were found to appreciably influence sound levels and structure within the tank environment. This study further discusses the distinctiveness of the soundscape, how it is shaped by the various operating components and considers the aquaculture soundscape in relation to natural soundscapes found within aquatic tropical environments.

Domestication for Conservation of an Endangered Species: The Case of the Wollemi Pine

A small population of tall slender conifers was discovered in 1994 in a deep rainforest canyon of the Wollemi National Park, New SouthWales, Australia. The living trees closely resembled fossils that were more than 65 million years old, and this ‘living fossil’ was recognised as a third extant genus in the Araucariaceae (Araucaria, Agathis and now Wollemia). The species was named the Wollemi pine (W. nobilis). Extensive searches uncovered very few populations, with the total number of adult trees being less than 100. Ex situ collections were quickly established in Sydney as part of the Wollemi Pine Recovery Plan. The majority of the ex situ population was later transferred to our custom-built facility in Queensland for commercial multiplication. Domestication has relied very heavily on the species’ amenability to vegetative propagation because seed collection from the natural populations is dangerous, expensive, and undesirable for conservation reasons. Early propagation success was poor, with only about 25% of cuttings producing roots. However, small increases in propagation success have a very large impact on a domestication program because plant production can be modelled on an exponential curve where each rooted cutting develops into a mother plant that, in turn, provides more rooted cuttings. An extensive research program elevated rooting percentages to greater than 80% and also provided in vitro methods for plant multiplication. These successes have enabled international release of the Wollemi pine as a new and attractive species for ornamental horticulture.

Evidence of episodic brittle faulting in the cratonic part of the Peninsular India and its implications for seismic hazard in slow deforming regions

The region around Waclakkancheri, in the province of Kerala, India, which lies in the vicinity of Palghat-Cauvery ;hear zone (within the Precambrian crystalline terrain), has been a site of microseismic activity since 1989. Earlier studies had identified a prominent WNW-ESE structure overprinting on the E-W trending lineaments associated with Palghat-Cauvery shear zone. We have mapped this structure, located in a chamockite quarry near Desamangalam, Waclakkancheri, which we identify as a ca. 30 km-long south dipping reverse fault. This article presents the characteristics of this fault zone exposed on the exhumed crystalline basement and discusses its significance in understanding the earthquake potential of the region. This brittle deformation zone consists of fracture sets with small-scale displacement and slip planes with embedded fault gouges. The macroscopic as well as the microscopic studies of this fault zone indicate that it evolved through different episodes of faulting in the presence of fluids. The distinct zones within consolidated gouge and the cross cutting relationship of fractures indicate episodic fault activity. At least four faulting episodes can be recognized based on the sequential development of different structural elements in the fault rocks. The repeated ruptures are evident along this shear zone and the cyclic behavior of this fault consists of co-seismic ruptures alternating with inter-seismic periods, which is characterized by the sealed fractures and consolidated gouge. The fault zone shows a minimum accumulated dip/oblique slip of 2.1 m in the reverse direction with a possible characteristic slip of 52 cm (for each event). The ESR dating of fault gouge indicates that the deformation zone records a major event in the Middle Quaternary. The empirical relationships between fault length and slip show that this fault may generate events M >= 6. The above factors suggest that this fault may be characterized as potentially active. Our study offers some new pointers that can be used in other slow deforming cratonic hinterlands in exploring the discrete active faults.

High pressure transport behaviour of AgI-Ag2O-MoO3 glasses and the cluster model

The effect of pressure on the conductivity of fast ion conducting AgI-Ag2O-MoO3 glasses has been investigated down to 150 K. The observed variation of conductivities appears to support the application of cluster model to the ionic glasses.

Lost in space: The place of the architectural milieu in the aetiology and treatment of schizophrenia

Purpose – Psychological and epidemiological literature suggests that the built environment plays both causal and therapeutic roles in schizophrenia, but what are the implications for designers? The purpose of this paper is to focus on the role the built environment plays in psycho‐environmental dynamics, in order that negative effects can be avoided and beneficial effects emphasised in architectural design. Design/methodology/approach – The approach taken is a translational exploration of the dynamics between the built environment and psychotic illness, using primary research from disciplines as diverse as epidemiology, neurology and psychology. Findings – The built environment is conceived as being both an agonist and as an antagonist for the underlying processes that present as psychosis. The built environment is implicated through several means, through the opportunities it provides. These may be physical, narrative, emotional, hedonic or personal. Some opportunities may be negative, and others positive. The built environment is also an important source of unexpected aesthetic stimulation, yet in psychotic illnesses, aesthetic sensibilities characteristically suffer from deterioration. Research limitations/implications – The findings presented are based on research that is largely translated from very different fields of enquiry. Whilst findings are cogent and logical, much of the support is correlational rather than empirical. Social implications – The WHO claims that schizophrenia destroys 24 million lives worldwide, with an exponential effect on human and financial capital. Because evidence implicates the built environment, architectural and urban designers may have a role to play in reducing the human costs wrought by the illness. Originality/value – Never before has architecture been so explicitly implicated as a cause of mental illness. This paper was presented to the Symposium of Mental Health Facility Design, and is essential reading for anyone involved in designing for improved mental health.

Best use modelling for sustainable Australia sports field surfaces

The Best Use Modelling for Sustainable Australian Sports Field Surfaces project has achieved significant success. The project has attracted participation from councils throughout Australia, with in excess of 300 sports fields evaluated from 18 councils to date. An important project component is the derivation of a recommended standard procedure for specifying the performance of playing surfaces. An associated step has been to establish recommended playing surface performance standards for community level sports fields. The derived modelling also provides information on the expected usage and associated costs of different sports surface development options. This is expected to assist the Australian turf production industry through demonstrating to councils that cost effective natural turf options exist that can meet higher usage expectation (as a viable alternative to synthetic turf). A web-accessed data base system will be made available to councils from January 2010 on (reference to www.passturf.com). This system will enable participating councils to record and analyse field performance over time. The system is considered world-leading, and will help keep the Australian parks industry to the international forefront. Tools developed as part of the project offer councils the opportunity to internally assess the performance of their current sports field provision, to identify any deficiencies and to determine the best corrective measure if any deficiency is identified. This is expected to offer community benefits to both sports facility providers and facility user groups. In turn this will aid the provision of affordable community access to safe and good quality playing surfaces. Tools and associated information material will be made available to councils throughout Australia by the end of this year, via the Parks and Leisure Aust. web site. The Best Use Modelling Project is work in progress. On-going input will be needed to ensure the web-accessed database software is as user friendly as possible, new performance testing data will need to be inputted, and tools provided to participating councils updated. Through the support of HAL there is now a well-structured, nationally-supported system in place for benchmarking playing surfaces and for assisting councils to optimise their resource allocation to sports field upgrade or maintenance work.