High current density induced damage mechanisms in electronic solder joints: a state-of-the-art review

High current density induced damages such as electromigration in the on-chip interconnection /metallization of Al or Cu has been the subject of intense study over the last 40 years. Recently, because of the increasing trend of miniaturization of the electronic packaging that encloses the chip, electromigration as well as other high current density induced damages are becoming a growing concern for off-chip interconnection where low melting point solder joints are commonly used. Before long, a huge number of publications have been explored on the electromigration issue of solder joints. However, a wide spectrum of findings might confuse electronic companies/designers. Thus, a review of the high current induced damages in solder joints is timely right this moment. We have selected 6 major phenomena to review in this paper. They are (i) electromigration (mass transfer due electron bombardment), (ii) thermomigration (mass transfer due to thermal gradient), (iii) enhanced intermetallic compound growth, (iv) enhanced current crowding, (v) enhanced under bump metallisation dissolution and (vi) high Joule heating and (vii) solder melting. the damage mechanisms under high current stressing in the tiny solder joint, mentioned in the review article, are significant roadblocks to further miniaturization of electronics. Without through understanding of these failure mechanisms by experiments coupled with mathematical modeling work, further miniaturization in electronics will be jeopardized

Impact of assembly process technologies on electronic packaging materials

Assembly processes used to bond components to printed circuit boards can have a significant impact on these boards and the final packaged component. Traditional approaches to bonding components to printed circuit boards results in heat being applied across the whole board assembly. This can lead to board warpage and possibly high residual stresses. Another approach discussed in this paper is to use Variable Frequency Microwave (VFM) heating to cure adhesives and underfills and bond components to printed circuit boards. In terms of energy considerations the use of VFM technology is much more cost effective compared to convection/radiation heating. This paper will discuss the impact of traditional reflow based processes on flexible substrates and it will demonstrate the possible advantages of using localised variable frequency microwave heating to cure materials in an electronic package.

Predictive reliability and prognostics for electronic components: current capabilities and future challenges

Future analysis tools that predict the behavior of electronic components, both during qualification testing and in-service lifetime assessment, will be very important in predicting product reliability and identifying when to undertake maintenance. This paper will discuss some of these techniques and illustrate these with examples. The paper will also discuss future challenges for these techniques.

Integrated reliability and prognostics prediction methodology for power electronic modules

The article consists of a PowerPoint presentation on integrated reliability and prognostics prediction methodology for power electronic modules. The areas discussed include: power electronics flagship; design for reliability; IGBT module; design for manufacture; power module components; reliability prediction techniques; failure based reliability; etc.

An architectural approach to autonomics and self-management of automotive embedded electronic systems

Embedded electronic systems in vehicles are of rapidly increasing commercial importance for the automotive industry. While current vehicular embedded systems are extremely limited and static, a more dynamic configurable system would greatly simplify the integration work and increase quality of vehicular systems. This brings in features like separation of concerns, customised software configuration for individual vehicles, seamless connectivity, and plug-and-play capability. Furthermore, such a system can also contribute to increased dependability and resource optimization due to its inherent ability to adjust itself dynamically to changes in software, hardware resources, and environment condition. This paper describes the architectural approach to achieving the goals of dynamically self-configuring automotive embedded electronic systems by the EU research project DySCAS. The architecture solution outlined in this paper captures the application and operational contexts, expected features, middleware services, functions and behaviours, as well as the basic mechanisms and technologies. The paper also covers the architecture conceptualization by presenting the rationale, concerning the architecture structuring, control principles, and deployment concept. In this paper, we also present the adopted architecture V&V strategy and discuss some open issues in regards to the industrial acceptance.

I wanna be a protocol: online media and electronic structures of kinship

Heidegger famously identified Modernity with a technological leveling of being to a single order of a “standing reserve.” In a radically different tone, Gilles Deleuze articulated a single “plane of immanence” within which ontological distinctions between mind and body, God and world, interiority and exteriority become indiscernible. Taking such philosophical declarations as points of departure, this panel will consider how a collapse of ontological distinction emerged as a thematic and structural trope in literary and cinematic modernisms. We hope to consider how writers and film-makers of the 20th c. utilize the resources of their media to ask “the question of being” that troubled their philosophical contemporaries and heirs. In this vein, we will examine how these modernist ontologies of immanence describe the crisis of a subject saturated and eclipsed by a world which comprises her while also remaining strange or opaque. Papers will ask what is lost with the departure of a distinctly human sense of “being” and how the historical arrival of an alternative ontological order may be evident in the lived experience of modernity. In this sense, the relationship to departures and arrivals becomes the modern subject’s suspicion that he is unable to do either vis á vis the world.

Narrating the archive and archiving narrative: the electronic book and the logic of the index

The creation of my hypermedia work Index of Love, which narrates a love story as an archive of moments, images and objects recollected, also articulated for me the potential of the book as electronic text. The book has always existed as both narrative and archive. Tables of contents and indexes allow the book to function simultaneously as linear narrative and non-linear, searchable database. The book therefore has more in common with the so-called 'new media' of the 21st century than it does with the dominant 20th century media of film, video and audiotape, whose logic and mode of distribution are resolutely linear. My thesis is that the non-linear logic of new media brings to the fore an aspect of the book - the index - whose potential for the production of narrative is only just beginning to be explored. When a reader/user accesses an electronic work, such as a website, via its menu, they simultaneously experience it as narrative and archive. The narrative journey taken is created through the menu choices made. Within the electronic book, therefore, the index (or menu) has the potential to function as more than just an analytical or navigational tool. It has the potential to become a creative, structuring device. This opens up new possibilities for the book, particularly as, in its paper based form, the book indexes factual work, but not fiction. In the electronic book, however, the index offers as rich a potential for fictional narratives as it does for factual volumes. [ABSTRACT FROM AUTHOR]

A case study of the effectiveness of the electronic survey as a research tool for measuring students' experience of e-learning

This paper uses a case study approach to consider the effectiveness of the electronic survey as a research tool to measure the learner voice about experiences of e-learning in a particular institutional case. Two large scale electronic surveys were carried out for the Student Experience of e-Learning (SEEL) project at the University of Greenwich in 2007 and 2008, funded by the UK Higher Education Academy (HEA). The paper considers this case to argue that, although the electronic web-based survey is a convenient method of quantitative and qualitative data collection, enabling higher education institutions swiftly to capture multiple views of large numbers of students regarding experiences of e-learning, for more robust analysis, electronic survey research is best combined with other methods of in-depth qualitative data collection. The advantages and disadvantages of the electronic survey as a research method to capture student experiences of e-learning are the focus of analysis in this short paper, which reports an overview of large-scale data collection (1,000+ responses) from two electronic surveys administered to students using surveymonkey as a web-based survey tool as part of the SEEL research project. Advantages of web-based electronic survey design include flexibility, ease of design, high degree of designer control, convenience, low costs, data security, ease of access and guarantee of confidentiality combined with researcher ability to identify users through email addresses. Disadvantages of electronic survey design include the self-selecting nature of web-enabled respondent participation, which tends to skew data collection towards students who respond effectively to email invitations. The relative inadequacy of electronic surveys to capture in-depth qualitative views of students is discussed with regard to prior recommendations from the JISC-funded Learners' Experiences of e-Learning (LEX) project, in consideration of the results from SEEL in-depth interviews with students. The paper considers the literature on web-based and email electronic survey design, summing up the relative advantages and disadvantages of electronic surveys as a tool for student experience of e-learning research. The paper concludes with a range of recommendations for designing future electronic surveys to capture the learner voice on e-learning, contributing to evidence-based learning technology research development in higher education.

Identifying species and ecosystem sensitivities.

Executive Summary The programme of work was commissioned in September 1998 to supply information to underpin the UK’s commitments to protection and conservation of the ecosystems and biodiversity of the marine environment under the 1992 OSPAR Convention on the Protection of the Marine Environment of the North East Atlantic. The programme also provided support for the implementation of the Biodiversity Convention and the EU Habitats Directive. The MarLIN programme initiated a new approach to assessing sensitivity and recoverability characteristics of seabed species and biotopes based on structures (such as the seabed biotopes classification) and criteria (such as for assessing rarity and defining ‘sensitivity’) developed since 1997. It also developed tools to disseminate the information on the Internet. The species researched were those that were listed in conventions and directives, included in Biodiversity Action Plans, or were nationally rare or scarce. In addition, species were researched if they maintained community composition or structure and/or provided a distinctive habitat or were special to or especially abundant in a particular situation or biotope At its conclusion in August 2001, the work carried out under the contract with DETR/DEFRA had: · Developed protocols, criteria and structures for identifying ‘sensitivity’ and ‘recoverability’, which were tested by a programme management group. · Developed a database to hold research data on biology and sensitivity of species and biotopes. · Defined the link between human activities and the environmental factors likely to be affected by those activities. · Developed a user-friendly Web site to access information from the database, on the sensitivity and recoverability characteristics of over 100 species and basic information on over 200 species. Additionally, the project team have: · Brought together and facilitated discussion between current developers and users of electronic resources for environmental management, protection and education in the conference ‘Using Marine Biological Information in the Electronic Age’ (19-21 July 1999). · Contributed to the development of Ecological Quality Objectives for the North Sea (Scheveningen, 11- 3 September 1999 and subsequent papers). · Provided detailed information on species as a supplement to the National Biodiversity Network Gateway demonstration www.searchnbn.net. · Developed a peer-reviewed approach to electronic publication of updateable information. · Promoted the contract results and the MarLIN approach to the support of marine environmental management and protection at European research fora and, through the web site, internationally. The information available through the Web site is now being used by consultants and Government agencies. The DEFRA contract has been of critical importance in establishing the Marine Life Information Network (MarLIN) programme and has encouraged support from other organisations. Other related work in the MarLIN programme is on-going, especially to identify sensitivity of biotopes to support management of SACs (contract from English Nature in collaboration with Scottish Natural Heritage), to access data sources (in collaboration with the National Biodiversity Network) and to establish volunteer recording schemes for marine life. The results of the programme are best viewed on the Web site (www.marlin.ac.uk). Three reports have been produced during the project. A final report detailing the work undertaken, a brochure ‘Identifying the sensitivity of seabed ecosystems’ and a CD-ROM describing the programme and demonstrating the Web site have been delivered as final products in addition to the Web site.

Hidden Gems: systematically searching electronic databases for research publications for social work and social care.

Context: Electronic bibliographic databases are a key source for professional publications about social work and community care more generally. This article describes and evaluates a method of identifying relevant articles as part of a systematic review of research evidence. Decision making about institutional and home care services for older people is used as an example. Method: Four databases (Social Science Citation Index, Medline, CINAHL, and Caredata) that abstract publications relevant to health and social services were searched systematically to identify relevant research studies. The items retrieved were appraised independently using a standard form developed for the purpose. The searches were compared in terms of sensitivity, precision, overlap between databases, and inter-rater reliability. Results: The search retrieved 525 articles, of which 276 were relevant. The four databases retrieved 55%, 41%, 19%, and 1% of the relevant articles respectively, achieving these sensitivities with precision levels of 54%, 48%, 84% and 94%. The databases retrieved 116, 73, 24 and 15 unique relevant articles respectively, showing the need to use a range of databases. Discussion: A general approach to creating a search to retrieve relevant research has been developed. The development of an international, indexed database dedicated to literature relevant to social services is a priority to enable progress in evidence-based policy and practice in social work. Editors and researchers should consider using structured abstracts in order to improve the retrieval and dissemination of research.

THE INFORMATION ERA THREATENS PRIVACY: A Comparative Study of Electronic Money’s Privacy Policies and Privacy Laws

This thesis consists of an analysis of electronic money (e-money), e-money’s privacy policies and relevant privacy laws. The value of information and the development of technology enhance the risk of privacy violations in the information era. Consumer privacy interests with respect to e-money are governed in part by the Personal Information Protection and Electronic Documents Act (PIPEDA) in Canada and by the European Union’s Data Protection Directive. The analysis is directed at whether the privacy policies of three kinds of e-money – Octopus Card, PayPal and MasterCard – comply with the spirit and letter of these laws. In light of technology change, the laws should be interpreted to apply broadly to protect privacy interests. Enhanced privacy protection may in fact lead to greater adoption of e-money by consumers.