Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device

This paper presents design and simulation of a circular meander dipole antenna at the industrial, scientific, and medical band of 915 MHz for energy scavenging in a passive head-mountable deep brain stimulation device. The interaction of the proposed antenna with a rat body is modeled and discussed. In the antenna, the radiating layer is meandered, and a FR-4 substrate is used to limit the radius and height of the antenna to 14 mm and 1.60 mm, respectively. The resonance frequency of the designed antenna is 915 MHz and the bandwidth of 15 MHz at a return loss of -10 dB in free space. To model the interaction of the antenna with a rat body, two aspects including functional and biological are considered. The functional aspect includes input impedance, resonance frequency, gain pattern, radiation efficiency of the antenna, and the biological aspect involves electric field distribution, and SAR value. A complete rat model is used in the finite difference time domain based EM simulation software XFdtd. The simulated results demonstrate that the specific absorption rate distributions occur within the skull in the rat model, and their values are higher than the standard regulated values for the antenna receiving power of 1W.

Design and analysis of efficient rectifiers for wireless power harvesting in DBS devices

This paper presents an analysis of optimum rectifier circuits for wireless energy harvesting in deep brain stimulation (DBS) devices. Since DBS demands compact and low power consumption devices, small, high conversion efficient, and high output voltage rectifiers need to be developed. The investigation that is presented in this paper is analytical and simulated based. Analysis on a variety of circuit configurations brings more evidence to improve the performance of rectifiers. Analytical parameters influencing the output DC voltage and the efficiency of the rectifiers are described. The operating frequency of the 915 MHz industrial, scientific and medical (ISM) radio band is used in this study. The maximum conversion efficiency of the LC matched half wave rectifier, the Greinacher voltage doubler, the Delon doubler, and the 2-stage voltage multiplier is obtained as 56.34%, 74.45%, 71.48%, and 31.44%, respectively, at the 30 dBm input power level. The corresponding maximum output DC voltages are 6.27 V, 16.83 V, 13.36 V, and 9.20 V. Thus the Greinacher voltage doubler is deemed as the best configuration according to the conversion efficiency and the output voltage measurements.

Design and analysis of a low actuation voltage electrowetting-on-dielectric device

This paper presents an Electrowetting-on-Dielectric (EWOD) device with optimized insulating layers operated by low actuation voltage. The device consists of an electrode array on a silicon substrate, covered by a dielectric layer and a hydrophobic layer. To characterize the performance of the device, simulations are performed for the dielectric layer of Sio₂ and the hydrophobic layer of Sio₂, Su-8 and Parylene C at different voltages. The volume finite difference approach of the Coventorware software was used to carry out the simulations. Two different molar of di-ionized water droplet were considered in the simulations. It was observed that the device having the Sio₂ dielectric layer and the Parylene C hydrophobic layer moved the 1M KCL (potassium chloride) droplet at the actuation voltage of 25V.

Knowledge translation strategies to improve the use of evidence in public health decision making in local government: intervention design and implementation plan

Background: 

A parallel-group, randomised controlled trial of a multimedia, self-directed, coping skills training intervention for patients with cancer and their partners: design and rationale

Introduction:

The design and implementation of a novel method for quantifying training loads in elite rowing: the T2minute method

Introduction: A systematic approach to managing the training of elite athletes is supported by accurate training load measurement. However, quantifying the training of elite Australian rowers is complex due to unique challenges: 1) the multi-centre, multi-state structure of the national program; 2) the variety of training undertaken, incorporating rowing-specific and non-specific modalities, with continuous and interval efforts that span the full intensity spectrum; and 3) the limitations of existing quantification methods for capturing total training loads undertaken from varied training. These challenges highlighted a need to create a consistent, location-independent framework for prescribing training in elite rowing, with a capacity to account for varied training. Methods: An in-house proprietary measure (the T2minute method) was developed at the National Rowing Centre of Excellence (NRCE), as a collaborative project between sport scientists and national squad coaches. The design phase was informed by assessments of the existing training measures, and built upon standardised intensity zones established at the Australian Institute of Sport. A common measurement unit was chosen: one T2minute equates to one minute of on-water single scull rowing at T2 intensity (∼60–72% VO2max). Each intensity zone was assigned a weighting factor according to the curvilinear relationship between power output, intensity, and blood lactate response. Each training mode was assigned a weighting factor based on whether coaches perceived it to be “harder” or “easier” than onwater rowing. With coaches’ feedback, the method was refined over a period of five months. The T2minute method was implemented as the core framework for prescribing training for elite Australian rowers throughout the 2009–2012 Olympic cycle. Results: The implementation of the T2minute method successfully established consistency with training prescription and monitoring practices within the NRCE high performance program. The national roll out this method has influenced rowing training methodology at elite and sub-elite levels in Australia. Since implementation, the method has undergone scientific validation. Further research is underway, utilising the method to explore complex relationships between rowers’ training and performance outcomes. Conclusion: The T2minute method is a novel approach that allows rowing coaches and sport scientists to utilise one consistent system to quantify load from varied training. Its implementation represents a considerable achievement in establishing a common framework for managing the training process within a complex organisational structure. This collaborative approach used to develop the T2minute method provides unique insight into the important considerations and practical challenges of applying training science to enhance elite sport performance.

Design and analysis of an antenna for batteryless transcranial direct current stimulation devices

The purpose of this study is to design a low-cost planar Archimedean dipole antenna for batteryless transcranial direct current stimulation devices. The antenna parameters including resonance frequency, radiation efficiency, radiation pattern, and gain are simulated using finite difference time domain based electromagnetic simulation software XFdtd. The proposed antenna is simulated with low-cost FR4 PCB substrate of thickness of 1.6 mm. The antenna is designed with half wavelength of resonant frequency and fed with a matching line. The target frequency band is the industrial, scientific and medical (ISM) band of 915 MHz which is in the simulated band width of 31 MHz (903-934MHz). Moreover, since the bio-effect of specific absorption rate by radio frequency electromagnetic wave for power harvesting is an important concern, we try to find out the safety limit. Thus a quantitative analysis of distributions of electric field and power absorption in anatomical human head model by the far field radio frequency energy received by our designed antenna has been presented.

Design and simulation of a high isolation RF MEMS shunt capacitive switch for C-K band

This paper presents a wide band RF MEMS capacitive switch. The LC resonant frequency is reduced from mm wave to X band frequencies at down-state by using a meander type membrane, with the frequency band is being increased by adding two short high impedance lines at both ends of coplanar waveguide (CPW). Moreover, this acts as T-match circuit in up-state position and improves the matching. Simulation results demonstrate that the capacitance ratio reduces from 50 to 21.4, S21 and S11 are less than −10dB for the entire frequency band at down-state and up-state. Also, a comprehensive and complete electric model of the switch is proposed and simulation results agree well with the characteristics of the physical structure of the MEMS switch. Vpull-in and Vpull-out of this switch are 8.1V and 0.3V, respectively.