972 resultados para Cost analyses
Resumo:
An evaluation of the pesticides extracted from the soil matrix was conducted using a citrate-buffered solid phase dispersion sample preparation method (QuEChERS). The identification and quantitation of pesticide compounds was performed using gas chromatography-mass spectrometry. Because of the occurrence of the matrix effect in 87% of the analyzed pesticides, the quantification was performed using matrix-matched calibration. The method's quantification limits were between 0.01 and 0.5 mg kg-1. Repeatability and intermediate precision, expressed as a relative standard deviation percentage, were less than 20%. The recoveries in general ranged between 62% and 99%, with a relative standard deviation < 20%. All the responses were linear, with a correlation coefficient (r) ≥0.99.
Resumo:
Ultrasound as a metrology tool has many applications in health care, industrial, and chemical analyses. Ultrasonic techniques are rapid, low-cost, non-invasive, and highly repeatable. Although ultrasound can be used to measure emulsions, no effort had been made thus far to optimize its sensitivity for metrological analysis. In this work, a technique for analyzing oil in water was validated. The wave velocity and attenuation were chosen as the ultrasonic parameters. The technique was implemented in the boundary region established by law for effluents from industrial plants involved with biofuel manufacturing. A technical effort of this study was to establish stable emulsions in concentrations close to the desired limit of study. The phase behaviours of pseudo-ternary oil, sodium chloride, and sodium lauryl sulphate were studied. The composition in the widest region of the diagram allowed for the formation of a stable emulsion, from which the ultrasound measurement was carried out. An analytical curve was obtained using ultrasonic attenuation to determine the content of oils and greases in wastewater ranging 15–240 ppm. The speed of sound did not appear to be an applicable parameter for this application. The technique was demonstrated to be an important alternative solution for the continuous monitoring of wastewater with regard to oil concentrations.
Resumo:
Low-cost tungsten monometallic catalysts containing variable amounts of metal (4.5, 7.1 and 8.5%W) were prepared by impregnating alumina with ammonium metatungstate as an inexpensive precursor. The catalysts were characterized using ICP, XPS, XRD, TPR and hydrogen chemisorption. These techniques revealed mainly WO3-Al2O3 (W6+) species on the surface. The effects of the content of W nanoparticles and reaction temperature on activity and selectivity for the partial hydrogenation of 3-hexyne, a non-terminal alkyne, were assessed under moderate conditions of temperature and pressure. The monometallic catalysts prepared were found to be active and stereoselective for the production of (Z )-3-hexene, had the following order: 7.1WN/A > 8.5 WN/A ≥ 4.5 WN/A. Additionally, the performance of the synthesized xWN/A catalysts exhibited high sensitivity to temperature variation. In all cases, the maximum 3-hexyne total conversion and selectivity was achieved at 323 K. The performance of the catalysts was considered to be a consequence of two phenomena: a) the electronic effects, related to the high charge of W (+6), causing an intensive dipole moment in the hydrogen molecule (van der Waals forces) and leading to heterolytic bond rupture; the H+ and H- species generated approach a 3-hexyne adsorbate molecule and cause heterolytic rupture of the C≡C bond into C- = C+; and b) steric effects related to the high concentration of WO3 on 8.5WN/A that block the Al2O3 support. Catalyst deactivation was detected, starting at about 50 min of reaction time. Electrodeficient W6+ species are responsible for the formation of green oil at the surface level, blocking pores and active sites of the catalyst, particularly at low reaction temperatures (293 and 303 K). The resulting best catalyst, 7.1WN/A, has low fabrication cost and high selectivity for (Z )-3-hexene (94%) at 323 K. This selectivity is comparable to that of the classical and more expensive industrial Lindlar catalyst (5 wt% Pd). The alumina supported tungsten catalysts are low-cost potential replacements for the Lindlar industrial catalyst. These catalysts could also be used for preparing bimetallic W-Pd catalysts for selective hydrogenation of terminal and non-terminal alkynes.
Resumo:
The calyxes of Hibiscus sabdariffa are used in traditional medicine around the world. However, quality assurance protocols and chemical variability have not been previously analyzed. In the present study, chemical characterization of a set of samples of H. sabdariffa calyxes commercialized in Colombia was accomplished with the aim to explore the chemical variability among them. Chemometrics-based analyses on the data obtained from the HPLC-UV-DAD-derived profiles were then performed. Thus, the pre-processed single-wavelength data were subjected to principal component analysis (PCA). The PCA-derived results evidenced different groups which were well-correlated to the corresponding total phenolic and total anthocyanin contents. Multi-wavelength chromatographic (HPLC-UV-DAD surfaces) data were additionally examined via parallel factor analysis (PARAFAC) as data reduction method and the obtained loadings were subsequently submitted to PCA and orthogonal partial least squares discriminant analysis (OPLS-DA). Results were thus consistent with those from single-wavelength data. PCA loadings were employed to determine those chemical components responsible for the data variance and OPLS-DA model, constructed from PARAFAC loadings, and indicated differentiation according total anthocyanin contents among samples. The present chemometric analysis therefore demonstrated to be an excellent tool for differentiation of H. sabdariffacalyxes according to their chemical composition.
LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS
Resumo:
The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone automated analytical systems at low cost. Among the areas that can benefit from this approach are the analysis of industrial products and effluents and environmental analysis. In this work, a multi-pumping flow system is proposed for the determination of phosphorus in effluents and polluted water samples. The system employs photometric detection based on the formation of molybdovanadophosphoric acid, and the fluidic circuit is built using three solenoid micropumps. The detection is implemented with a low cost LED-photodiode photometric detection system and the whole system is controlled by an open-source Arduino Uno microcontroller board. The optimization of the timing to ensure the color development and the pumping cycle is discussed for the proposed implementation. Experimental results to evaluate the system behavior are presented verifying a linear relationship between the relative absorbance and the phosphorus concentrations for levels as high as 50 mg L-1.
Resumo:
Rhizoctonia solani isolates obtained from common beans (Phaseolus vulgaris) grown in the mountainous Atlantic Rainforest (Mata Atlântica) region of São Paulo, Brazil, were analyzed to determine their genetic diversity using internal transcribed spacer (ITS), microsatellite and telomere sequence-based PCR primers. Restriction digestion of the ITS1/5.8S/ITS2 ribosomal regions yielded unique banding patterns specific for AG4 and its subgroups. The ITS restriction digestion (ITS/RFLP), telomere and microsatellite primers identified five to 11 genotypes within the isolates of R. solani. While all isolates were pathogenic on beans, there was no correlation found between genotypic differences and pathogenicity. The different PCR primers revealed a number of isolates that were genetically similar. Some of these genetic groups were supported by more than one of the primers utilized in this study, thus confirming their relationship.
Resumo:
Reverse transcriptase (RT) sequence analysis is an important technique used to detect the presence of transposable elements in a genome. Putative RT sequences were analyzed in the genome of the pathogenic fungus C. perniciosa, the causal agent of witches' broom disease of cocoa. A 394 bp fragment was amplified from genomic DNA of different isolates of C. perniciosa belonging to C-, L-, and S-biotypes and collected from various geographical areas. The cleavage of PCR products with restriction enzymes and the sequencing of various RT fragments indicated the presence of several sequences showing transition events (G:C to A:T). Southern blot analysis revealed high copy numbers of RT signals, forming different patterns among C-, S-, and L-biotype isolates. Sequence comparisons of the predicted RT peptide indicate a close relationship with the RT protein from thegypsy family of LTR-retrotransposons. The possible role of these retrotransposons in generating genetic variability in the homothallic C. perniciosa is discussed.
Resumo:
Ostotapahtumassa kiinnitetään usein huomiota hintaan, mutta hankintapäätökseen vaikuttavat myös muutkin kustannukset. Ongelman asiassa aiheuttaa kokonaiskustannusvaikutuksien arvioinnin ja mittauksen haasteellisuus, sekä kunnollisen raportointijärjestelmän puuttuminen. Hankinnan kokonaiskustannusten selvittäminen pitkällä aikavälillä on kuitenkin tärkeää, koska hankintojen osuus yritysten liikevaihdoista on jatkuvassa kasvussa. Työn tarkoituksena oli tarkastella Total cost of ownershipia, eli TCO:ta, elinkaarilaskennan sovellusta. Tarkastelun aluksi työlle luotiin teoreettinen pohja käyttäen hyväksi kirjallisuutta, artikkeleita sekä www-dokumentteja. Teoriaosuus rakentui kustannuslaskennan osalta kustannusten tunnistamisesta, jakamisesta ja kohdistamisesta. TCO:sta luotiin mahdollisimman laaja-alainen teoreettinen kuvaus. Seuraavaksi työssä käsiteltiin TCO:n soveltamista sen perinteisimpiin käyttökohteisiin: taloudellisesti merkittäviin hankintoihin, ulkoistamispäätöksiin, hinnoitteluun sekä toimittajien suorituskyvyn seurantaan ja analysointiin. TCO:n soveltamista käsittelevä osuus päätettiin kotimaisilla esimerkeillä TCO:n soveltamisesta IT-hankintojen apuvälineenä. Työ päätettiin käymällä läpi työtä tehdessä kypsyneet ajatukset sekä johtopäätökset.
Resumo:
Target of this study was to examine the current supply chain with focus on external part and identify the cost potential areas which lie there. The goal was to evaluate the cost save potential and give estimate what would be required in order to realise it. Base data related to study was searched and examined with using company’s enterprise resource planning system. In case feasible two types of scenarios were built in order to describe the scale of save potential. First scenario was theoretical and achieving it would require further investments and second scenario was realistic approach where more limitations were taken into account. The results clearly show that there is high save potential in supply chain costs linked to balance between internal and external operations. Realising of it would require at least minor investments as current internal capacity is not on a level to fully absorb the additional volumes which are needed in order to realise the potential. This study can be used as a basis when starting new projects related to investment needs.
Resumo:
One filler often utilized in flexible polyurethane foams is calcium carbonate (CaCO3) because it is non-abrasiveness, non-toxicity and facilitated pigmentation. However, it is observed that the excess of commercial CaCO3 utilized in industry possibly causing permanent deformations and damaging the quality of the final product. The effect of different concentrations of commercial CaCO3, in flexible foams, was studied. Different concentrations of CaCO3 were used for the synthesis of flexible polyurethane foams, which were submitted to morphological and thermal analyses to verify the alterations provoked by the progressive introduction of this filler.
Resumo:
The aim of this study was to find out the benefits of centralized procurement. Research began with description of sourcing process and tools used in it. In this process the final tendering was done with e-auction. Due the fact that e-auction is unknown for most people, there is also need to explain when it can be used and what are the pros and cons. In the end of the study the pros and cons of the centralized sourcing process were analysed. This research was qualitative and that is why the results can’t be generalised to all other situations. Spend-analysis, Cost Break Down and Kraljic Matrix were used during the sourcing process. Process began with product group analysis- After that the financial and strategic significance was analysed. After analyses first quotations were asked and according to the results suppliers were eliminated and the selected ones were invited to e-auction. E-auction is an event where suppliers bid in a live online situation against each other to have the lowest current price. Benefits of it are fast sourcing process, discovering the true market price and information transparency. In the other hand the biggest problem comes from weakened supplier relationships. Average prices degreased 26 % from the 2009 price level and acquired price level was over 20 % lover that prices asked by individual projects. In a e-auction only moderate 1,34 % saving was acquired, but it also had other benefits as increasing the internal interest towards it.
Resumo:
Currently, numerous high-throughput technologies are available for the study of human carcinomas. In literature, many variations of these techniques have been described. The common denominator for these methodologies is the high amount of data obtained in a single experiment, in a short time period, and at a fairly low cost. However, these methods have also been described with several problems and limitations. The purpose of this study was to test the applicability of two selected high-throughput methods, cDNA and tissue microarrays (TMA), in cancer research. Two common human malignancies, breast and colorectal cancer, were used as examples. This thesis aims to present some practical considerations that need to be addressed when applying these techniques. cDNA microarrays were applied to screen aberrant gene expression in breast and colon cancers. Immunohistochemistry was used to validate the results and to evaluate the association of selected novel tumour markers with the outcome of the patients. The type of histological material used in immunohistochemistry was evaluated especially considering the applicability of whole tissue sections and different types of TMAs. Special attention was put on the methodological details in the cDNA microarray and TMA experiments. In conclusion, many potential tumour markers were identified in the cDNA microarray analyses. Immunohistochemistry could be applied to validate the observed gene expression changes of selected markers and to associate their expression change with patient outcome. In the current experiments, both TMAs and whole tissue sections could be used for this purpose. This study showed for the first time that securin and p120 catenin protein expression predict breast cancer outcome and the immunopositivity of carbonic anhydrase IX associates with the outcome of rectal cancer. The predictive value of these proteins was statistically evident also in multivariate analyses with up to a 13.1- fold risk for cancer specific death in a specific subgroup of patients.
Resumo:
Resistance induction through the use of chemical inducers often results in physiological costs to the plant. In this study, induced resistance in cotton plants was evaluated with regard to physiological costs in a cultivar susceptible to Colletotrichum gossypii var. cephalosporioides (CNPA GO 2002 - 7997). Plants were cultivated in substrates with two levels of nitrogen and received two applications of acibenzolar-S-methyl (ASM), jasmonic acid (JA) and Agro-Mos® (AM) disease resistance inducers. Plant height (H), internodal length (IL), shoot fresh weight (SFW), root fresh weight (RFW), shoot dry weight (SDW) and root dry weight (RDW) were evaluated. The activity of the phenylalanine ammonia lyase (PAL) and peroxidase (POX) was also determined. The plants treated with ASM presented high physiological costs with an accentuated reduction in H, SFW and SDW, whereas those treated with JA exhibited a significant increase in SDW, and did not significantly differ from H and IL. In the potting mix supplemented with nitrogen, all inducers differed from the control treatment regarding to internodal length, whereas only ASM and AM presented a significant difference between one another in the potting mix without the addition of nitrogen. Significant correlations (P=0.05) were found for most of the variables analyzed, with greater correlations observed between SFW and SDW (0.94); IL and H (0.74); SFW and H (0.70); and SDW and H (0.70). ASM induced the least amount of PAL activity, significantly differing from the remaining treatments. Greater POX activity was observed in ASM, which significantly differed from the control. AM and JA, however, presented lower activity than the control with regard to these enzymes, and it was not possible to confirm induction resistance in these two treatments.
Resumo:
Diplomityön tavoitteena on selvittää yritysvastuun sisältöä ja merkitystä yritysten toiminnassa. Vastuullinen yritystoiminta sisältää taloudellisen, sosiaalisen ja ympäristön näkökulman. Ne ovat yksi edellytys yrityksen toiminnan jatkuvuudelle ja menestykselle. Työssä keskitytään erityisesti yritysvastuun ympäristönäkökulmaan, sillä ympäristöasiat ovat yhä enemmän esillä. Huoli ympäristön tilasta on lisääntynyt selvästi ja myös kuluttajat vaativat yrityksiltä vastuullista toimintaa. Lisäksi ympäristöön liittyvä lainsäädäntö kiristyy ja säädökset lisääntyvät. Kestävän kehityksen mukainen toiminta säästää luonnonvaroja ja vähentää ympäristön saastumista. Ympäristöasiat on huomioitava yrityksen kaikessa toiminnassa. Vihreässä taloudessa ympäristölle aiheutuu mahdollisimman vähän haittaa. Yrityksillä on merkittävä asema vihreän talouden kehittämisessä, sillä yritykset voivat vähentää toiminnasta aiheutuvia ympäristövaikutuksia, tuottaa ympäristöä säästäviä tuotteita sekä tarjota ratkaisuja ympäristövaikutusten pienentämiseen. Uuden teknologian kehittäminen on kestävän kehityksen kannalta oleellista ja siten voidaan myös saavuttaa kilpailuetua. Yritysten ympäristövastuullista toimintaa tukevat ympäristöpolitiikka ja –strategia, ympäristöjohtaminen, ympäristöjärjestelmät, ympäristöriskianalyysit, ympäristölaskenta sekä ympäristönmyötäinen tuotesuunnittelu. Nämä ovat työkaluja, jotka selventävät yritysten ympäristöön liittyviä tavoitteita ja päämääriä. Niitä voidaan hyödyntää päätöksenteon tukena ja ympäristöasioiden kehittämisessä. Ympäristökysymykset on myös tärkeää saada yhdistetyksi yritysten taloudelliseen ohjaukseen ja tuotesuunnitteluun. Työn perusteella voidaan todeta, että vastuullinen toiminta on merkittävä osa yritysten kilpailukykyä ja se on tärkeää yrityksen tulevaisuuden kannalta. Vastuullisuus on ehdottomasti yksi edellytys yritysten toiminnan jatkuvuudelle. Vastuullinen toiminta edistää yrityksen kilpailukykyä ja sen avulla voidaan saavuttaa myös uusia asiakkaita ja markkina-alueita. Ympäristöystävällisempien tuotteiden kehittäminen, jätteen määrän vähentäminen ja prosessien tehostaminen tuovat yrityksille kustannussäästöjä. Vastuullinen toiminta lisää yritysten innovatiivisuutta ja uusien liiketoimintamallien syntymistä. Kuluttajavalinnoissa painottuvat enemmän myös ympäristöön ja yhteiskuntaan liittyvät arvot, joten vastuullisuus voi lisätä kysyntää ja asiakkaiden määrää. Myös rahoittajat ja uudet työntekijät ovat kiinnostuneita vastuullisista yrityksistä. Vastuullinen yritys nähdään houkuttelevana ja luotettavana yhteistyökumppanina.