Current features of infective endocarditis in elderly patients: results of the International Collaboration on Endocarditis Prospective Cohort Study.

BACKGROUND: Elderly patients are emerging as a population at high risk for infective endocarditis (IE). However, adequately sized prospective studies on the features of IE in elderly patients are lacking. METHODS: In this multinational, prospective, observational cohort study within the International Collaboration on Endocarditis, 2759 consecutive patients were enrolled from June 15, 2000, to December 1, 2005; 1056 patients with IE 65 years or older were compared with 1703 patients younger than 65 years. Risk factors, predisposing conditions, origin, clinical features, course, and outcome of IE were comprehensively analyzed. RESULTS: Elderly patients reported more frequently a hospitalization or an invasive procedure before IE onset. Diabetes mellitus and genitourinary and gastrointestinal cancer were the major predisposing conditions. Blood culture yield was higher among elderly patients with IE. The leading causative organism was Staphylococcus aureus, with a higher rate of methicillin resistance. Streptococcus bovis and enterococci were also significantly more prevalent. The clinical presentation of elderly patients with IE was remarkable for lower rates of embolism, immune-mediated phenomena, or septic complications. At both echocardiography and surgery, fewer vegetations and more abscesses were found, and the gain in the diagnostic yield of transesophageal echocardiography was significantly larger. Significantly fewer elderly patients underwent cardiac surgery (38.9% vs 53.5%; P < .001). Elderly patients with IE showed a higher rate of in-hospital death (24.9% vs 12.8%; P < .001), and age older than 65 years was an independent predictor of mortality. CONCLUSIONS: In this large prospective study, increasing age emerges as a major determinant of the clinical characteristics of IE. Lower rates of surgical treatment and high mortality are the most prominent features of elderly patients with IE. Efforts should be made to prevent health care-associated acquisition and improve outcomes in this major subgroup of patients with IE.

Use of nucleoside reverse transcriptase inhibitors and risk of myocardial infarction in HIV-infected patients enrolled in the D:A:D study: a multi-cohort collaboration.

BACKGROUND: Whether nucleoside reverse transcriptase inhibitors increase the risk of myocardial infarction in HIV-infected individuals is unclear. Our aim was to explore whether exposure to such drugs was associated with an excess risk of myocardial infarction in a large, prospective observational cohort of HIV-infected patients. METHODS: We used Poisson regression models to quantify the relation between cumulative, recent (currently or within the preceding 6 months), and past use of zidovudine, didanosine, stavudine, lamivudine, and abacavir and development of myocardial infarction in 33 347 patients enrolled in the D:A:D study. We adjusted for cardiovascular risk factors that are unlikely to be affected by antiretroviral therapy, cohort, calendar year, and use of other antiretrovirals. FINDINGS: Over 157,912 person-years, 517 patients had a myocardial infarction. We found no associations between the rate of myocardial infarction and cumulative or recent use of zidovudine, stavudine, or lamivudine. By contrast, recent-but not cumulative-use of abacavir or didanosine was associated with an increased rate of myocardial infarction (compared with those with no recent use of the drugs, relative rate 1.90, 95% CI 1.47-2.45 [p=0.0001] with abacavir and 1.49, 1.14-1.95 [p=0.003] with didanosine); rates were not significantly increased in those who stopped these drugs more than 6 months previously compared with those who had never received these drugs. After adjustment for predicted 10-year risk of coronary heart disease, recent use of both didanosine and abacavir remained associated with increased rates of myocardial infarction (1.49, 1.14-1.95 [p=0.004] with didanosine; 1.89, 1.47-2.45 [p=0.0001] with abacavir). INTERPRETATION: There exists an increased risk of myocardial infarction in patients exposed to abacavir and didanosine within the preceding 6 months. The excess risk does not seem to be explained by underlying established cardiovascular risk factors and was not present beyond 6 months after drug cessation.

Anàlisi d’un incendi en una nau industrial a Gavà. Conclusions per a l’aplicació del (RSCIEI) en naus de tipus A en horitzontal

1. SINISTRE D’UNA NAU INDÚSTRIAL A GAVÀ 2. ANÀLISI DE SINISTRES DE PÒRTICS ENTRE MITGERES 3. CONTROL DE LA FALLADA DE LES ESTRUCTURES AMB MESURES PASSIVES 3.1 Definició del model simulats 3.2 Paràmetres de càlcul amb OZONE 3.3 Corbes d’incendi resultants del model de zones 1D 3.4 Control tèrmic de l’estructura amb sistemes de ventilació 3.5 Control tèrmic de l’estructura amb aïllament 3.6 Taula de resultats 3.7 Conclusions 1D 4. SIMULACIÓ DELS INCENDIS AMB FIRE DYNAMICS SIMULATOR

Mentoría para fomentar el éxito socioeducativo de jóvenes peruanos residentes en Barcelona

El programa de mentoría propuesto, toma como punto de partida la actual situación académica y social de jóvenes peruanos residentes en Barcelona y cercanías. Diversos estudios señalan la existencia de un alto índice de abandono escolar en Catalunya, así como un bajo rendimiento escolar que afecta principalmente a estudiantes extranjeros. El objetivo general es fomentar y optimizar la adecuada escolarización de jóvenes peruanos de entre 12 y 20 años. A través de procesos de mentoría y voluntariado se pretenden mejorar sus competencias escolares y sociales favoreciendo la creación de modelos de referencia positivos para los jóvenes en riesgo, así como espacios de aprendizaje, intercambio y acercamiento que fomenten la integración y la cohesión social entre las comunidades extranjera y autóctona. Para la realización del programa se prevé optimizar los recursos ya existentes, como los puntos de información juvenil y los centros de Asesoramiento Académica para jóvenes (CAAJ) y por otro lado se cuenta con la colaboración del Consulado General del Perú en Barcelona y de la escuela Virolai de Barcelona

Electronic Construction Collaboration System – Final Phase, SPR RB02-008, 2014

This phase of the research project involved two major efforts: (1) Complete the implementation of AEC-Sync (formerly known as Attolist) on the Iowa Falls Arch Bridge project and (2) develop a web-based project management system (WPMS) for projects under $10 million. For the first major effort, AEC-Sync was provided for the Iowa Department of Transportation (DOT) in a software as a service agreement, allowing the Iowa DOT to rapidly implement the solution with modest effort. During the 2010 fiscal year, the research team was able to help with the implementation process for the solution. The research team also collected feedback from the Broadway Viaduct project team members before the start of the project and implementation of the solution. For the 2011 fiscal year, the research team collected the post-project surveys from the Broadway Viaduct project members and compared them to the pre-project survey results. The result of the AEC-Sync implementation in the Broadway Viaduct project was a positive one. The project members were satisfied with the performance of AEC-Sync and how it facilitated document management and transparency. In addition, the research team distributed, collected, and analyzed the pre-project surveys for the Iowa Falls Arch Bridge project. During the 2012 fiscal year, the research team analyzed the post-project surveys for the Iowa Falls Arch Bridge project AEC-Sync implementation and found a positive outcome when compared to the pre-project surveys. The second major effort for this project involved the identification and implementation of a WPMS solution for smaller bridge and highway projects. During the 2011 fiscal year, Microsoft SharePoint was selected to be implemented on these smaller highway projects. In this year, workflows for the shop/working drawings for the smaller highway projects specified in Section 1105 of the Iowa DOT Specifications were developed. These workflows will serve as the guide for the development of the SharePoint pages. In order to implement the Microsoft SharePoint pages, the effort of an integrated team proved to be vital because it brought together the expertise required from researchers, programmers, and webpage developers to develop the SharePoint pages.

Electronic Construction Collaboration System—Phase II, SPR RB02-008, 2010

During the first year of research, work was completed to identify Iowa DOT needs for web-based project management system (WPMS) and evaluate how commercially available solutions could meet these needs. Researchers also worked to pilot test custom developed WPMS solutions on Iowa DOT bridge projects. At the end of the first year of research, a Request for Proposals (RFP) was developed and issued by the Iowa DOT for the selection of a commercial WPMS to pilot test on multiple bridge projects. During the second year of research, the responses to the RFP issued during the first year of research were evaluated and a solution was selected. The selected solution, Attolist, was customized, tested, and implemented during the fall of 2009. Beginning in the winter of 2010, the solution was implemented on Iowa DOT projects. Researchers worked to assist in the training, implementation, and performance evaluation of the solution. Work will continue beyond the second year of research to implement Attolist on an additional pilot project. During this time, work will be completed to evaluate the impact of WPMS on Iowa DOT bridge projects.

How can continuing professional development better promote shared decision-making? Perspectives from an international collaboration.

ABSTRACT: BACKGROUND: Shared decision-making is not widely implemented in healthcare. We aimed to set a research agenda about promoting shared decision-making through continuing professional development. METHODS: Thirty-six participants met for two days. RESULTS: Participants suggested ways to improve an environmental scan that had inventoried 53 shared decision-making training programs from 14 countries. Their proposed research agenda included reaching an international consensus on shared decision-making competencies and creating a framework for accrediting continuing professional development initiatives in shared decision-making. CONCLUSIONS: Variability in shared decision-making training programs showcases the need for quality assurance frameworks.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Avaliação agronômica de um biossólido industrial para a cultura do milho

O objetivo deste trabalho foi avaliar a viabilidade agronômica de um biossólido industrial para a cultura do milho. O experimento foi realizado no campo, em um Cambissolo distrófico, nos anos agrícolas 1999/2000 e 2000/2001. A aplicação de 0, 6, 12, 18 e 24 Mg ha-1 de biossólido base seca, suplementado com K2O nos dois anos e 30% do P2O5 recomendado no segundo ano, foi comparada à adubação mineral completa. O biossólido melhorou a fertilidade do solo, o estado nutricional e a produtividade do milho, que apresentou resposta quadrática às doses aplicadas, atingindo a máxima de 9.992 kg ha-1 de grãos com 22,5 Mg ha-1 de biossólido, superando em 21% a adubação mineral e em 74% o controle. Mesmo na maior dose aplicada, os teores de nutrientes, Na e metais pesados no biossólido não causaram fitotoxicidade. A equivalência em produtividade à adubação mineral (7.895 kg ha-1) foi obtida com 10 Mg ha-1 de biossólido. Com base na equivalência ao NPK, o valor do biossólido foi estimado em R$ 43,70 Mg-1 base seca e R$ 8,74 Mg-1 base úmida. Considerando-se o custo de transporte, a aplicação deste biossólido é economicamente viável numa distância de até 66 km da fonte geradora.