Design e sintesi di nuove sonde luminescenti per il "targeting" dell'avidina

Recent studies on the use of bio-conjugating organometallic probes report on the possibility to use biotinylated-derivatives to selectively coordinate to a specific protein, avidin. In the present thesis, the synthesis of four new bifunctional ligands is described. The ligands contain both a pyridine triazolic unit able to coordinate a transition metal, and a biotin fragment able to bond avidin: the two functionalities are linked together by an appropriate aromatic linker (amide or ester). The obtained ligands were then employed to form luminescent Ir(III) complexes, that have been fully characterized also by a photophysical point of view both in organic and in aqueous solvent. Therefore, titrations of solutions of avidin with aqueous solutions of Ir(III)-complexes have been performed in order to estimate the luminescence variations of the complexes in the presence or in the absence of bio-conjugation.

Special Heusler compounds for spintronic applications

This work emphasizes the potential of Heusler compounds in a wide range of spintronic applications. Using electronic structure calculations it is possible to design compounds for specific applications. Examples for GMR and TMR applications, for spin injection into semiconductors, and for spin torque transfer applications will be shown. After a detailed introduction about spintronics and related materials chapter 5 reports about the investigation of new half-metallic compounds where the Fermi energy is tuned in the middle of the gap to result in more stable compounds for GMR and TMR applications. The bulk properties of the quaternary Heusler alloy Co2Mn(1-x)Fe(x)Si with the Fe concentration ranging from x=0 to 1 will be reported and the results suggest that the best candidate for applications may be found at an iron concentration of about 50%. Due to the effect that in the Co2Mn(1-x)Fe(x)Si series the transition metal carrying the localized moment is exchanged and this might lead to unexpected effects on the magnetic properties if the samples are not completely homogeneous chapter 6 reports about the optimization of the Heusler compounds for GMR and TMR applications. The structural and magnetic properties of the quaternary Heusler alloy Co2FeAl(1-x)Si(x) with varying Si concentration will be reported. From the combination of experimental (better order for high Si content) and theoretical findings (robust gap at x = 0.5) it is concluded that a compound with an intermediate Si concentration close to x=0.5-0.7 would be best suited for spintronic applications, especially for GMR and TMR applications. In chapter 7 the detailed investigation of compounds for spin injection into semiconductors will be reported. It will be shown that the diluted magnetic semiconductors based on CoTiSb with a very low lattice mismatch among each other are interesting materials for spintronics applications like Spin-LEDs or other spin injection devices. Chapter 8 refers about the investigation of the theoretically predicted half-metallic completely compensated-ferrimagnet Mn$_3$Ga as a suitable material for spin torque transfer applications. The Curie temperature is above 730~K and the electronic structure calculations indicate a nearly half-metallic ferrimagnetic order with 88% spin polarization at the Fermi energy.}

Ab-initio determination of x-ray absorption near edge structure (xanes) spectra in an ultrasoft and norm conserving pseudopotentials scheme

X-ray absorption spectroscopy (XAS) is a powerful means of investigation of structural and electronic properties in condensed -matter physics. Analysis of the near edge part of the XAS spectrum, the so – called X-ray Absorption Near Edge Structure (XANES), can typically provide the following information on the photoexcited atom: - Oxidation state and coordination environment. - Speciation of transition metal compounds. - Conduction band DOS projected on the excited atomic species (PDOS). Analysis of XANES spectra is greatly aided by simulations; in the most common scheme the multiple scattering framework is used with the muffin tin approximation for the scattering potential and the spectral simulation is based on a hypothetical, reference structure. This approach has the advantage of requiring relatively little computing power but in many cases the assumed structure is quite different from the actual system measured and the muffin tin approximation is not adequate for low symmetry structures or highly directional bonds. It is therefore very interesting and justified to develop alternative methods. In one approach, the spectral simulation is based on atomic coordinates obtained from a DFT (Density Functional Theory) optimized structure. In another approach, which is the object of this thesis, the XANES spectrum is calculated directly based on an ab – initio DFT calculation of the atomic and electronic structure. This method takes full advantage of the real many-electron final wavefunction that can be computed with DFT algorithms that include a core-hole in the absorbing atom to compute the final cross section. To calculate the many-electron final wavefunction the Projector Augmented Wave method (PAW) is used. In this scheme, the absorption cross section is written in function of several contributions as the many-electrons function of the finale state; it is calculated starting from pseudo-wavefunction and performing a reconstruction of the real-wavefunction by using a transform operator which contains some parameters, called partial waves and projector waves. The aim of my thesis is to apply and test the PAW methodology to the calculation of the XANES cross section. I have focused on iron and silicon structures and on some biological molecules target (myoglobin and cytochrome c). Finally other inorganic and biological systems could be taken into account for future applications of this methodology, which could become an important improvement with respect to the multiscattering approach.

Polysulfurated aromatic compounds: preparation and photophysical properties

The aim of this thesis was the synthesis and photophysical characterization of some new polysulfurated aromatic compounds: this class of molecules can offer intriguing properties, potentially useful for the construction of new materials for optoelectronic devices. Two main families of compounds have been synthesized: the first is represented by a series of small molecular asterisks, with peripheral aromatic units, showing luminescence in solid phase or in highly rigid conditions. All compounds with peripheral substituents display an AIE behavior (Aggregation Induced Emission) with radiative deactivation of the triplet states. Taking inspiration from these smaller asterisks, a larger molecule with the same geometry has been designed, decorated with terpyridyl moieties as the outermost units: this compound shows great affinity for the coordination of several transition metal ions, changing luminescence properties after the interaction with zinc ions. With the same intentions, a tetrasulfurated pyrene-core molecule with terpyridyl external units has been synthesized and isolated: this ligand exhibits good coordination capabilities towards transition metal ions, giving rise to luminescent nanoaggregates upon addition of zinc(II), characterized by DLS and AFM microscopy. In addition a NIR emission is recorded after coordination of neodymium(III), showing evidence of an intramolecular energy transfer process.

Synthesis and aplication of linear and macrocyclic nitrogen ligand

Linear and macrocyclic nitrogen ligands have been found wide application during the years. Nitrogen has a much strong association with transition-metal ions because the electron pair is partucularly available for complexing purposes. We started our investigation with the synthesis of new chiral perazamacrocycles containing four pyrrole rings. This ligand was synthesized by the [2+2]condensation of (R,R)-diaminocyclohexane and dipirranedialdehydes and was tested, after a complexation with Cu(OAc)2, in Henry reactions. The best yields (96%) and higher ee’s (96%) were obtained when the meso-substituent on the dipyrrandialdehyde was a methyl group. The positive influence of the pyrrole-containing macrocyclic structure on the efficiency/enantioselectivity of the catalytic system was demonstrated by comparison with the Henry reactions performed using analogous ligands. Henry product was obtain in good yield but only 73% of ee, when the dialdehyde unit was replaced by a triheteroaromatic dialdehye (furan-pyrrol-furan). Another well known macrocyclic ligand is calix[4]pyrrole. We decided to investigate, in collaboration with Neier’s group, the metal-coordinating properties of calix[2]pyrrole[2]pyrrolidine compounds obtained by the reduction of calix[4]pyrrole. We focused our attention on the reduction conditions, and tested different Pd supported (charcoal, grafite) catalysts at different condition. Concerning the synthesis of linear polyamine ligands. We focused our attention to the synthesis of 2-heteroaryl- and 2,5-diheteroarylpyrrolidines. The reductive amination reaction of diarylketones and aryl-substitutedketo-aldehydes with different chiral amines was exploited to prepare a small library of diastereo-enriched substituted pyrrolidines. We have also described a new synthetic route to 1,2-disubstituted 1,2,3,4-tetrahydropyrrole[1,2-a]pyrazines, which involves the diastereoselective addition of Grignard reagents to chiral oxazolidines. The best diastereoselectivity (98:2) was dependent on the nature of both the chiral auxiliary, (S)-1-phenylglycinol, and the nature of the organometallic reagent (MeMgBr).

Using sulfur isotope fractionation to understand the atmospheric oxidation of SO 2

Sulfate aerosol plays an important but uncertain role in cloud formation and radiative forcing of the climate, and is also important for acid deposition and human health. The oxidation of SO2 to sulfate is a key reaction in determining the impact of sulfate in the environment through its effect on aerosol size distribution and composition. This thesis presents a laboratory investigation of sulfur isotope fractionation during SO2 oxidation by the most important gas-phase and heterogeneous pathways occurring in the atmosphere. The fractionation factors are then used to examine the role of sulfate formation in cloud processing of aerosol particles during the HCCT campaign in Thuringia, central Germany. The fractionation factor for the oxidation of SO2 by ·OH radicals was measured by reacting SO2 gas, with a known initial isotopic composition, with ·OH radicals generated from the photolysis of water at -25, 0, 19 and 40°C (Chapter 2). The product sulfate and the residual SO2 were collected as BaSO4 and the sulfur isotopic compositions measured with the Cameca NanoSIMS 50. The measured fractionation factor for 34S/32S during gas phase oxidation is αOH = (1.0089 ± 0.0007) − ((4 ± 5) × 10−5 )T (°C). Fractionation during oxidation by major aqueous pathways was measured by bubbling the SO2 gas through a solution of H2 O2

Reaktionen monovalenter Münzmetalle in flüssigem Ammoniak

Im Rahmen dieser Arbeit konnten erstmals eine Reihe von Ammoniakaten von Münzmetallhalogeniden (M(I)Hal) und Pseudohalogeniden aus flüssigem Ammoniak in einkristalliner Form isoliert und strukturell charakterisiert werden. Mit dem Ammoniakat des Gold(I)-iodids wurden Metathesen in flüssigem Ammoniak durchgeführt, die die Isolierung einiger sehr thermolabiler, teilweise explosiver Alkoholate des Golds ermöglichten. Die Bestimmung der Kristallstruktur eines Gold(I)-phenolates erlaubte erste Einblicke in deren Aufbau.rnIn der Reihe der Ammoniakate der M(I)Hal mit Ausnahme von Silberiodid, werden keine direkten Metall-Halogen-Kontakte ausgebildet. Die Ammoniakate der Chloride und Bromide des Kupfers und Silbers sowie des Kupferiodids besitzen isotype Strukturen. Sie liegen als Trisammoniakate [M(NH3)3]Hal vor. Im Ammoniakat von Silberiodid besitzen die Silberionen durchgängig die Koordinationszahl 4. Neben Ag•••NH3- findet man auch direkte Kationen-rnAnionen-Kontakte und sehr kurze Ag(I)-Ag(I)-Abstände. Das Goldkation im Ammoniakat von Goldiodid besitzt die Koordinationszahl 2 und wird ausschließlich durch Ammoniakmoleküle koordiniert. Die gebildeten H3N-NH3-Hanteln werden über aurophile Wechselwirkungen verknüpft.rn rnDie Ammoniakate der Cyanide von Silber und Gold, enthalten molekulare Baueinheiten des Typs:(H3N)nMCN [(n= 1 für M= Au und n= 2 für M= Ag].rnrnAnders als bei den solvatfreien Homologen wird eine Ausbildung von Polymerketten nicht beobachtet. Das linear aufgebaute Ammoniakat von Goldcyanid ermöglicht die Ausbildung von aurophilen Wechselwirkungen. Metallophile Wechselwirkungen zwischen dem als Dimer vorliegenden Ammoniakat von AgCN scheinen nicht ausgebildet zu werden.rnrnMetatheseversuche von Goldiodid mit einem Amid und diversen Alkanolaten lieferten teilweise explosive Produkte. Es ist davon auszugehen, dass mit zunehmender Basizität der eingesetzten Anionen, die an das Gold(I)-ion koordinierten Ammoniakmoleküle deprotoniert werden und explosives Goldamid gebildet wird. Der als zweites Produkt entstehende Alkohol kann ebenfalls ein Ammoniakat bilden. Im Fall von Li-Fencholat wird ein solches in Form sehr tiefschmelzender Einkristalle erhalten.rnrnDa die Deprotonierung der an Gold koordinierten Ammoniakmoleküle unweigerlich zu explosiven oder sehr instabilen Produkten führt, wurde die geringere Basizität der Phenolate ausgenutzt, um dies zu umgehen. Im Falle der Umsetzung von AuI mit Li-2,6-di-tert.-butylphenolat gelang tatsächlich die Isolierung eines kristallinen Gold(I)-phenolats.rn

Photophysical investigation of light-harvesting systems for solar-to-fuel conversion

In recent years, an increasing attention has been given to the optimization of the performances of new supramolecular systems, as antennas for light collection. In such background, the aim of this thesis was the study of multichromophoric architectures capable of performing such basic action. A synthetic antenna should consist of a structure with large UV-Vis absorption cross-section, panchromatic absorption, fixed orientation of the components and suitable energy gradients between them, in order to funnel absorbed energy towards a specific site, through fast energy-transfer processes. Among the systems investigated in this thesis, three suitable classes of compounds can be identified: 1) transition metal-based multichromophoric arrays, as models for antenna construction, 2) free-base trans-A2B-phenylcorroles, as self-assembling systems to make effective mimics of the photosynthetic system, and 3) a natural harvester, the Photosystem I, immobilized on the photoanode of a solar-to-fuel conversion device. The discussion starts with the description of the photophysical properties of dinuclear quinonoid organometallic systems, able to fulfil some of the above mentioned absorption requirements, displaying in some cases panchromatic absorption. The investigation is extended to the efficient energy transfer processes occurring in supramolecular architectures, suitably organized around rigid organic scaffolds, such as spiro-bifluorene and triptycene. Furthermore, the photophysical characterization of three trans-A2B-phenylcorroles with different substituents on the meso-phenyl ring is introduced, revealing the tendency of such macrocycles to self-organize into dimers, by mimicking natural self-aggregates antenna systems. In the end, the photophysical analysis moved towards the natural super-complex PSI-LHCI, immobilized on the hematite surface of the photoanode of a bio-hybrid dye-sensitized solar cell. The importance of the entire work is related to the need for a deep understanding of the energy transfer mechanisms occurring in supramolecules, to gain insights and improve the strategies for governing the directionality of the energy flow in the construction of well-performing antenna systems.

Complessi carbenici N-eterociclici di rutenio: catalizzatori omogenei in reazioni di idrogenazione e deidrogenazione

Il presente lavoro di tesi si inserisce in un progetto di ricerca volto alla sintesi di nuovi complessi di metalli di transizione per lo sviluppo di catalizzatori bifunzionali metallo-legante da impiegare in reazioni di catalisi omogenea, in particolare in reazioni redox quali idrogenazione e deidrogenazione attraverso il trasferimento di idrogeno. Il mio progetto ha riguardato la messa a punto della sintesi di complessi di Ru(0) che combinano leganti ciclopentadienonici e carbeni N-eterociclici e la sintesi dei corrispondenti complessi cationici per protonazione. Inoltre, è stato sintetizzato e caratterizzato un nuovo complesso cationico attraverso la metilazione del corrispettivo complesso neutro. I complessi sintetizzati sono stati utilizzati come precursori di catalizzatori nella riduzione tramite trasferimento di idrogeno del 4-fluoroacetofenone, valutandone l’attività catalitica in relazione a leganti, additivi e controioni. Allo scopo di delineare qualche ipotesi sul meccanismo di reazione sono stati effettuati diversi studi sulla reattività dei complessi impiegati in catalisi, in particolare usando la piridina come agente di “trapping”. Infine, è stato condotto uno studio preliminare dell’attività catalitica dei complessi sintetizzati nell’ossidazione di benzilalcol a benzaldeide. The present work is part of a research project that involves the study of new ruthenium-based transition metal complexes in order to develop new metal-ligand bifunctional catalysts to employ in homogeneous catalytic systems, in particular in redox reactions such as hydrogenation and dehydrogenation through hydrogen transfer. My project is focused on the optimization of the synthesis of Ru(0) complexes that combines different ligands as tetraphenylcyclopentadienone and N-heterocyclic carbenes and the synthesis of the corresponding cationic complexes by protonation. Furthermore, it is reported the synthesis and characterization of a new cationic complex obtained by methylation of the corresponding neutral complex. All the prepared complexes were employed as catalyst precursors in the transfer hydrogenation of 4-fluoroacetophenone and their performances were investigated in relation to the type of ligands, additives and counterions. The reactivity of these ruthenium complexes was also investigated with the aim of delineate some hypothesis on the reaction mechanism, in particular employing pyridine as a trapping agent. Finally, preliminary studies on the oxidation of benzyl alcohol have been carried out.

Multiple pathways of neuroprotection against oxidative stress and excitotoxic injury in immature primary hippocampal neurons

In the immature brain hydrogen peroxide accumulates after excitotoxic hypoxia-ischemia and is neurotoxic. Immature hippocampal neurons were exposed to N-methyl-D-aspartate (NMDA), a glutamate agonist, and hydrogen peroxide (H(2)O(2)) and the effects of free radical scavenging and transition metal chelation on neurotoxicity were studied. alpha-Phenyl-N-tert.-butylnitrone (PBN), a known superoxide scavenger, attenuated both H(2)O(2) and NMDA mediated toxicity. Treatment with desferrioxamine (DFX), an iron chelator, at the time of exposure to H(2)O(2) was ineffective, but pretreatment was protective. DFX also protected against NMDA toxicity. TPEN, a metal chelator with higher affinities for a broad spectrum of transition metal ions, also protected against H(2)O(2) toxicity but was ineffective against NMDA induced toxicity. These data suggest that during exposure to free radical and glutamate agonists, the presence of iron and other free metal ions contribute to neuronal cell death. In the immature nervous system this neuronal injury can be attenuated by free radical scavengers and metal chelators.

Highly Efficient Non-palladium Catalyzed Controlled Synthesis and X-ray Analysis of Functionalized 1,2-Diaryl-, 1,2,3-Triaryl- and 1,2,3,4-Tetraarylbenzene

A general, two-step highly efficient synthesis of 1,2-diaryl-, 1,2,3-triaryl- and 1,2,3,4-tetraarylbenzenes from simple stitching of alpha-oxo-ketene-S,S-acetals and active methylene compounds via a ‘lactone intermediate’ is described. This procedure offers easy access to highly functionalized arylated-benzenes containing sterically demanding groups in good to excellent yields. The novelty of the procedure lies in the fabrication of aromatic compounds with desired conformational flexibility along the molecular axis in a transition metal-free environment through easily accessible precursors. The crystal analysis of these arylated-benzene scaffolds showed that the peripheral aryl rings are arranged in propeller-like fashion with respect to the central benzene rings. Examination of the crystal packing in the structure of a 1,2,3,4-tetraarylbenzene 12c revealed a “N…pi interaction” between molecules related by a two-fold screw axis running in a direction. It is interesting that the repeat of the array of N…pi interaction around the axis of the 1,2,3,4-tetraarylbenzene 12c enforces the molecules in a helical pattern.

(Table 3) Chemical analyses from DSDP Holes 22-214, 22-215 and 22-216 in the Indian Ocean

The basalts and oceanic andesites from the aseismic Ninetyeast Ridge display trachytic, vesicular and amygdaloidal textures suggesting a subaerial volcanic environment. The normative composition of the Ninetyeast Ridge ranges from olivine picriteto nepheline-normative alkaline basalt, suggesting a wide range of differentiation. This is further supported by the fractionation-differentiation trends displayed by transition metal trace elements (Ni, Cr, V and Cu). The Ninetyeast Ridge rocks are enriched in rare earth (RE) and large ion lithophile (LIL) elements and Sr isotopes (0.7043-0.7049), similar to alkali basalts and tholeiites from seamounts and islands, but different from LIL-element-depleted tholeiitic volcanic rocks of the recent seismic mid-Indian oceanic ridge. The constancy of 87Sr/86Sr ratios for basalts and andesites is compatible with a model involving fractional crystallization of mafic magma. The variation of 87Sr/86Sr ratios between 0.97 and 2.79 may possibly be explained in terms of a primordial hot mantle and/or chemically contrasting heterogeneous mantle source layers relatively undepleted in LIL elements at different periods in the geologic past. In general, the Sr isotopic data for rocks from different tectonic environments are consistent with a "zoning-depletion model" with systematically arranged alternate alkali-poor and alkali-rich layers in the mantle beneath the Indian Ocean.

Sedimentation at Manop Site H in the eastern equatorial Pacific

Gravity cores recovered from Manganese Nodule Project site H (6°33'N, 92°49'W) show marked downcore variations in the abundance of calcium carbonate, organic carbon, opal, manganese, and other components deposited over the past 400,000 years. Variations in the downcore abundance of organic carbon, which ranges from 0.2 to 1.0%, can be used to hindcast redox conditions in the surface sediments over this time. The results indicate that the depth to the manganese redox boundary varied from about 5 to 25 cm below the seafloor during four major cycles. Downcore variations in solid phase Mn, Ni, and Cu can be produced by such changes in redox conditions. A model which predicts that solid phase Mn can be trapped and buried when the Mn redox boundary migrates rapidly upward is consistent with the observed organic carbon and Mn records and supports the reconstructed redox variations. The history of redox variations at site H can be explained by changes with time in surface water productivity. Major productivity variations at the site occur over 100-kyr cycles, with relatively higher productivity occurring during glacial stages. Thus Quaternary climate changes influence surface water productivity, redox conditions in sediments, and the cycling of transition metals.

Geochemistry of Mid-Atlantic Ridge sediments

Geochemical compositions and Sr and Nd isotopes were measured in two cores collected ~2 and 5 km from the Rainbow hydrothermal vent site on the Mid-Atlantic Ridge. Overall, the cores record enrichments in Fe and other metals from hydrothermal fallout, but sequential dissolution of the sediments allows discrimination between a leach phase (easily leachable) and a residue phase (refractory). The oxy-anion and transition metal distribution combined with rare earth element (REE) patterns suggest that (1) the leach fraction is a mixture of biogenic carbonate and hydrothermal Fe-Mn oxy-hydroxide with no significant contribution from detrital material and (2) >99.5% of the REE content of the leach fraction is of seawater origin. In addition, the leach fraction has an average 87Sr/86Sr ratio indistinguishable from modern seawater at 0.70916. Although we lack the epsilon-Nd value of present-day deep water at the Rainbow vent site, we believe that the REE budget of the leach fraction is predominantly of seawater origin. We suggest therefore that the leach fraction provides a record of local seawater epsilon-Nd values. Nd isotope data from these cores span the period of 4-14 ka (14C ages) and yield epsilon-Nd values for North East Atlantic Deep Water (NEADW) that are higher (-9.3 to -11.1) than those observed in the nearby Madeira Abyssal Plain from the same depth (-12.4 ± 0.9). This observation suggests that either the Iceland-Scotland Overflow Water (ISOW) and Lower Deep Water contributions to the formation of NEADW are higher along the Mid-Atlantic Ridge than in the surrounding basins or that the relative proportion of ISOW was higher during this period than is observed today. This study indicates that hydrothermal sediments have the potential to provide a higher-resolution record of deep water epsilon-Nd values, and hence deepwater circulation patterns in the oceans, than is possible from other types of sediments.