996 resultados para 190-1173


Relevância:

10.00% 10.00%

Publicador:

Resumo:

该文对4轮MISTY和3轮双重MISTY两种结构进行了优化。在保持其安全性不变的情况下,把4轮MISTY结构中第1轮的伪随机置换,用一个XOR-泛置换代替,第2,第3轮采用相同的伪随机置换,3轮结构中第1轮的伪随机置换用XOR-泛置换代替,其它轮相同。伪随机置换的数量分别由原来的4个变为2个,3个变为1个,从而缩短了运行时间,节省了密钥量,大大降低了结构的实现成本。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

缓存和预取在提高无线环境下的Web访问性能方面发挥着重要作用。文章研究针对无线局域网的Web缓存和预取机制,分别基于数据挖掘和信息论提出了采用序列挖掘和延迟更新的预测算法,设计了上下文感知的预取算法和获益驱动的缓存替换机制,上述算法已在Web缓存系统OnceEasyCache中实现。性能评估实验结果表明,上述算法的集成能有效地提高缓存命中率和延迟节省率。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

提出了网构软件环境下一种基于非确定性推理的构件服务质量动态评估方法,该方法基于贝叶斯网络,其主要特点在于考虑了用户对构件的QoS需求,可以预测在用户多种QoS需求下采用分级策略的构件服务能力,支持评估模型的动态更新,提高了评估结果的准确性,在自主开发的服务协同总线(Once-SCB)平台上进行了应用与验证,结果表明,该评估模型准确、有效,可以在用户多种QoS需求下为其选择最为合适的构件。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

藏文属于拼音文字,她的书写规则与英语书写规则一样是从左向右,从上到下,但每个单词之间没有空格,只用音节符把每个单词给分隔开。根据藏文文法,藏文的换行只能发生在音节符、单垂符,双垂符与空格的后面。目前主流浏览器(如Firefox,Netscape等)都不能处理藏文的这一断行特性,所以这些浏览器无法正常显示藏文文本,如Firefox将整个一段没有空格文本当作一个单词,造成在屏幕的右边无法换行。结果是用户必须拖动鼠标来浏览整篇文章,给用户带来了很大的麻烦。又由于藏文中大部分的拼音字母的宽度是不同的,在编写HTML文档时候也无法根据藏文字符串的多少来决定字符串的长度。该算法将采用了一个粗略的方法得到一个字符串长度的近似值,再根据行宽的限制在字符串的适当的位置找到一个可断行点进行断行。虽然得到的是近似值,但是基本上解决了主流浏览器无法处理藏文排版的问题。

Relevância:

10.00% 10.00%

Publicador:

Relevância:

10.00% 10.00%

Publicador:

Resumo:

分别应用管式炉反应器和热重分析手段对印刷线路板废弃物的热解行为和热解动力学进行了实验研究。在管式炉中,研究不同的热解温度:700~950℃,对产物分布和气体成分分布的影响。实验结果表明:PCB热解气体的主要成分是H2和CO2,气体的热值较低,仅为2.09~5.41MJ/m^3,PCB不适合以气体产物为目标的能源利用方式。应用Friedman方法对PCB的热解动力学进行了研究,求得PCB的热解动力学参数分别是:表观活化能190.92kJ/mol,反应级数5.97,指前因子lnA47.14min^-1。


A tubular furnace and thermogravimetry analysis (TGA) was used to investigate the characteristics of printed circuit'boards (PCB) pyrolysis and its kinetics,respectively. The effect of different temperatures: 700 ~950℃ on the products distribution and gas composition of PCB pyrolysis was explored. The results indicate that the main components of the gas derived from PCB are H2 and CO2 and the gas has a lower heating value (LHV) : 2.09~5.41 MJ/m^3. It can be concluded that PCB is not favorable for energy application directed at gas production. Friedman method was utilized to analyze the pyrolysis kinetics of PCB. The kinetic parameters obtained were: apparent activation energy 190.92 kJ/mol, reaction order 5.97 ,pre-exponential factor lnA 47.14 min^-1.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

针对旧式锅炉排污扩容专用排水装置体积大、操作繁、圬垢难以清除等缺陷,研究了新型锅炉排污扩容器专用排水装置,并对这一装置的结构特点、工作原理及制造工艺作了简介。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

受迫内流气体发生的理论及实验关联郭开华,陈阵,舒碧芬,蒙宗信(中国科学院广州能源研究所热泵及空调制冷技术研究中心广州510070)关键词气体发生,多相流,混合物,传热传质1引言在吸收式能量转换系统(如吸收人热泵、制冷机、吸收压缩复合式热泵、卡林纳动力...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

High speed visualizations and thermal performance studies of pool boiling heat transfer on copper foam covers were performed at atmospheric pressure, with the heating surface area of 12.0 mm by 12.0 mm, using acetone as the working fluid. The foam covers have ppi (pores per inch) from 30 to 90, cover thickness from 2.0 to 5.0 mm, and porosity of 0.88 and 0.95. The surface superheats are from -20 to 190 K, and the heat fluxes reach 140 W/cm(2). The 30 and 60 ppi foam covers show the periodic single bubble generation and departure pattern at low surface superheats. With continuous increases in surface superheats, they show the periodic bubble coalescence and/or re-coalescence pattern. Cage bubbles were observed to be those with liquid filled inside and vented to the pool liquid. For the 90 ppi foam covers, the bubble coalescence takes place at low surface superheats. At moderate or large surface superheats, vapor fragments continuously escape to the pool liquid. Boiling curves of copper foams show three distinct regions. Region I and II are those of natural convection heat transfer, and nucleate boiling heat transfer for all the foam covers. Region III is that of either a resistance to vapor release for the 30 and 60 ppi foam covers, or a capillary-assist liquid flow towards foam cells for the 90 ppi foam covers. The value of ppi has an important effect on the thermal performance. Boiling curves are crossed between the high and low ppi foam covers. Low ppi foams have better thermal performance at low surface superheats, but high ppi foams have better one at moderate or large surface superheats and extend the operation range of surface superheats. The effects of other factors such as pool liquid temperature, foam cover thickness on the thermal performance are also discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A glutamate biosensor based on the electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH), which was generated by the enzymatic reaction, was developed via employing a single-walled carbon nanotubes/thionine (Th-SWNTs) nanocomposite as a mediator and an enzyme immobilization matrix. The biosensor, which was fabricated by immobilizing glutamate dehydrogenase (GIDH) on the surface of Th-SWNTs, exhibited a rapid response (ca. 5 s), a low detection limit (0.1 mu M), a wide and useful linear range (0.5-400 mu M), high sensitivity (137.3 +/- 15.7) mu A mM(-1) cm(-2), higher biological affinity, as well as good stability and repeatability. In addition, the common interfering species, such as ascorbic acid, uric acid, and 4-acetamidophenol, did not cause any interference due to the use of a low operating potential (190 mV vs. NHE). The biosensor can be used to quantify the concentration of glutamate in the physiological level. The Th-SWNTs system represents a simple and effective approach to the integration of dehydrogenase and electrodes, which can provide analytical access to a large group of enzymes for wide range of bioelectrochemical applications including biosensors and biofuel cells.