Studies on orographic effects in a numerical weather prediction model

Numerical models, used for atmospheric research, weather prediction and climate simulation, describe the state of the atmosphere over the heterogeneous surface of the Earth. Several fundamental properties of atmospheric models depend on orography, i.e. on the average elevation of land over a model area. The higher is the models' resolution, the more the details of orography directly influence the simulated atmospheric processes. This sets new requirements for the accuracy of the model formulations with respect to the spatially varying orography. Orography is always averaged, representing the surface elevation within the horizontal resolution of the model. In order to remove the smallest scales and steepest slopes, the continuous spectrum of orography is normally filtered (truncated) even more, typically beyond a few gridlengths of the model. This means, that in the numerical weather prediction (NWP) models, there will always be subgridscale orography effects, which cannot be explicitly resolved by numerical integration of the basic equations, but require parametrization. In the subgrid-scale, different physical processes contribute in different scales. The parametrized processes interact with the resolved-scale processes and with each other. This study contributes to building of a consistent, scale-dependent system of orography-related parametrizations for the High Resolution Limited Area Model (HIRLAM). The system comprises schemes for handling the effects of mesoscale (MSO) and small-scale (SSO) orographic effects on the simulated flow and a scheme of orographic effects on the surface-level radiation fluxes. Representation of orography, scale-dependencies of the simulated processes and interactions between the parametrized and resolved processes are discussed. From the high-resolution digital elevation data, orographic parameters are derived for both momentum and radiation flux parametrizations. Tools for diagnostics and validation are developed and presented. The parametrization schemes applied, developed and validated in this study, are currently being implemented into the reference version of HIRLAM.

Quantum Chemical Studies on Tropospheric Nucleation Mechanisms Involving Sulfuric Acid

Nucleation is the first step of the process by which gas molecules in the atmosphere condense to form liquid or solid particles. Despite the importance of atmospheric new-particle formation for both climate and health-related issues, little information exists on its precise molecular-level mechanisms. In this thesis, potential nucleation mechanisms involving sulfuric acid together with either water and ammonia or reactive biogenic molecules are studied using quantum chemical methods. Quantum chemistry calculations are based on the numerical solution of Schrödinger's equation for a system of atoms and electrons subject to various sets of approximations, the precise details of which give rise to a large number of model chemistries. A comparison of several different model chemistries indicates that the computational method must be chosen with care if accurate results for sulfuric acid - water - ammonia clusters are desired. Specifically, binding energies are incorrectly predicted by some popular density functionals, and vibrational anharmonicity must be accounted for if quantitatively reliable formation free energies are desired. The calculations reported in this thesis show that a combination of different high-level energy corrections and advanced thermochemical analysis can quantitatively replicate experimental results concerning the hydration of sulfuric acid. The role of ammonia in sulfuric acid - water nucleation was revealed by a series of calculations on molecular clusters of increasing size with respect to all three co-ordinates; sulfuric acid, water and ammonia. As indicated by experimental measurements, ammonia significantly assists the growth of clusters in the sulfuric acid - co-ordinate. The calculations presented in this thesis predict that in atmospheric conditions, this effect becomes important as the number of acid molecules increases from two to three. On the other hand, small molecular clusters are unlikely to contain more than one ammonia molecule per sulfuric acid. This implies that the average NH3:H2SO4 mole ratio of small molecular clusters in atmospheric conditions is likely to be between 1:3 and 1:1. Calculations on charged clusters confirm the experimental result that the HSO4- ion is much more strongly hydrated than neutral sulfuric acid. Preliminary calculations on HSO4- NH3 clusters indicate that ammonia is likely to play at most a minor role in ion-induced nucleation in the sulfuric acid - water system. Calculations of thermodynamic and kinetic parameters for the reaction of stabilized Criegee Intermediates with sulfuric acid demonstrate that quantum chemistry is a powerful tool for investigating chemically complicated nucleation mechanisms. The calculations indicate that if the biogenic Criegee Intermediates have sufficiently long lifetimes in atmospheric conditions, the studied reaction may be an important source of nucleation precursors.

Molecular dynamics studies of nanoparticle impacts

This thesis concerns the dynamics of nanoparticle impacts on solid surfaces. These impacts occur, for instance, in space, where micro- and nanometeoroids hit surfaces of planets, moons, and spacecraft. On Earth, materials are bombarded with nanoparticles in cluster ion beam devices, in order to clean or smooth their surfaces, or to analyse their elemental composition. In both cases, the result depends on the combined effects of countless single impacts. However, the dynamics of single impacts must be understood before the overall effects of nanoparticle radiation can be modelled. In addition to applications, nanoparticle impacts are also important to basic research in the nanoscience field, because the impacts provide an excellent case to test the applicability of atomic-level interaction models to very dynamic conditions. In this thesis, the stopping of nanoparticles in matter is explored using classical molecular dynamics computer simulations. The materials investigated are gold, silicon, and silica. Impacts on silicon through a native oxide layer and formation of complex craters are also simulated. Nanoparticles up to a diameter of 20 nm (315000 atoms) were used as projectiles. The molecular dynamics method and interatomic potentials for silicon and gold are examined in this thesis. It is shown that the displacement cascade expansionmechanism and crater crown formation are very sensitive to the choice of atomic interaction model. However, the best of the current interatomic models can be utilized in nanoparticle impact simulation, if caution is exercised. The stopping of monatomic ions in matter is understood very well nowadays. However, interactions become very complex when several atoms impact on a surface simultaneously and within a short distance, as happens in a nanoparticle impact. A high energy density is deposited in a relatively small volume, which induces ejection of material and formation of a crater. Very high yields of excavated material are observed experimentally. In addition, the yields scale nonlinearly with the cluster size and impact energy at small cluster sizes, whereas in macroscopic hypervelocity impacts, the scaling 2 is linear. The aim of this thesis is to explore the atomistic mechanisms behind the nonlinear scaling at small cluster sizes. It is shown here that the nonlinear scaling of ejected material yield disappears at large impactor sizes because the stopping mechanism of nanoparticles gradually changes to the same mechanism as in macroscopic hypervelocity impacts. The high yields at small impactor size are due to the early escape of energetic atoms from the hot region. In addition, the sputtering yield is shown to depend very much on the spatial initial energy and momentum distributions that the nanoparticle induces in the material in the first phase of the impact. At the later phases, the ejection of material occurs by several mechanisms. The most important mechanism at high energies or at large cluster sizes is atomic cluster ejection from the transient liquid crown that surrounds the crater. The cluster impact dynamics detected in the simulations are in agreement with several recent experimental results. In addition, it is shown that relatively weak impacts can induce modifications on the surface of an amorphous target over a larger area than was previously expected. This is a probable explanation for the formation of the complex crater shapes observed on these surfaces with atomic force microscopy. Clusters that consist of hundreds of thousands of atoms induce long-range modifications in crystalline gold.

Studies of the star-forming structures in the dense interstellar medium: a view by dust extinction

New stars in galaxies form in dense, molecular clouds of the interstellar medium. Measuring how the mass is distributed in these clouds is of crucial importance for the current theories of star formation. This is because several open issues in them, such as the strength of different mechanism regulating star formation and the origin of stellar masses, can be addressed using detailed information on the cloud structure. Unfortunately, quantifying the mass distribution in molecular clouds accurately over a wide spatial and dynamical range is a fundamental problem in the modern astrophysics. This thesis presents studies examining the structure of dense molecular clouds and the distribution of mass in them, with the emphasis on nearby clouds that are sites of low-mass star formation. In particular, this thesis concentrates on investigating the mass distributions using the near infrared dust extinction mapping technique. In this technique, the gas column densities towards molecular clouds are determined by examining radiation from the stars that shine through the clouds. In addition, the thesis examines the feasibility of using a similar technique to derive the masses of molecular clouds in nearby external galaxies. The papers presented in this thesis demonstrate how the near infrared dust extinction mapping technique can be used to extract detailed information on the mass distribution in nearby molecular clouds. Furthermore, such information is used to examine characteristics crucial for the star formation in the clouds. Regarding the use of extinction mapping technique in nearby galaxies, the papers of this thesis show that deriving the masses of molecular clouds using the technique suffers from strong biases. However, it is shown that some structural properties can still be examined with the technique.

Studies of electronic structure by x-ray Raman and emission spectroscopy: applications to MgB2 superconductors and high pressure physics

X-ray Raman scattering and x-ray emission spectroscopies were used to study the electronic properties and phase transitions in several condensed matter systems. The experimental work, carried out at the European Synchrotron Radiation Facility, was complemented by theoretical calculations of the x-ray spectra and of the electronic structure. The electronic structure of MgB2 at the Fermi level is dominated by the boron σ and π bands. The high density of states provided by these bands is the key feature of the electronic structure contributing to the high critical temperature of superconductivity in MgB2. The electronic structure of MgB2 can be modified by atomic substitutions, which introduce extra electrons or holes into the bands. X ray Raman scattering was used to probe the interesting σ and π band hole states in pure and aluminum substituted MgB2. A method for determining the final state density of electron states from experimental x-ray Raman scattering spectra was examined and applied to the experimental data on both pure MgB2 and on Mg(0.83)Al(0.17)B2. The extracted final state density of electron states for the pure and aluminum substituted samples revealed clear substitution induced changes in the σ and π bands. The experimental work was supported by theoretical calculations of the electronic structure and x-ray Raman spectra. X-ray emission at the metal Kβ line was applied to the studies of pressure and temperature induced spin state transitions in transition metal oxides. The experimental studies were complemented by cluster multiplet calculations of the electronic structure and emission spectra. In LaCoO3 evidence for the appearance of an intermediate spin state was found and the presence of a pressure induced spin transition was confirmed. Pressure induced changes in the electronic structure of transition metal monoxides were studied experimentally and were analyzed using the cluster multiplet approach. The effects of hybridization, bandwidth and crystal field splitting in stabilizing the high pressure spin state were discussed. Emission spectroscopy at the Kβ line was also applied to FeCO3 and a pressure induced iron spin state transition was discovered.

Multiwavelength studies of regolith effects in planetary remote sensing

A large proportion of our knowledge about the surfaces of atmosphereless solar-system bodies is obtained through remote-sensing measurements. The measurements can be carried out either as ground-based telescopic observations or space-based observations from orbiting spacecraft. In both cases, the measurement geometry normally varies during the observations due to the orbital motion of the target body, the spacecraft, etc.. As a result, the data are acquired over a variety of viewing and illumination angles. Surfaces of planetary bodies are usually covered with a layer of loose, broken-up rock material called the regolith whose physical properties affect the directional dependence of remote-sensed measurements. It is of utmost importance for correct interpretation of the remote-sensed data to understand the processes behind this alteration. In the thesis, the multi-angular effects that the physical properties of the regolith have on remote-sensing measurements are studied in two regimes of electromagnetic radiation, visible to near infrared and soft X-rays. These effects are here termed generally the regolith effects in remote sensing. Although the physical mechanisms that are important in these regions are largely different, notable similarities arise in the methodology that is used in the study of the regolith effects, including the characterization of the regolith both in experimental studies and in numerical simulations. Several novel experimental setups have been constructed for the thesis. Alongside the experimental work, theoretical modelling has been carried out, and results from both approaches are presented. Modelling of the directional behaviour of light scattered from a regolith is utilized to obtain shape and spin-state information of several asteroids from telescopic observations and to assess the surface roughness and single-scattering properties of lunar maria from spacecraft observations. One of the main conclusions is that the azimuthal direction is an important factor in detailed studies of planetary surfaces. In addition, even a single parameter, such as porosity, can alter the light scattering properties of a regolith significantly. Surface roughness of the regolith is found to alter the elemental fluorescence line ratios of a surface obtained through planetary soft X-ray spectrometry. The results presented in the thesis are among the first to report this phenomenon. Regolith effects need to be taken into account in the analysis of remote-sensed data, providing opportunities for retrieving physical parameters of the surface through inverse methods.

Law student lifestyle pressures

One significant factor influencing student wellbeing is the degree to which their studies are subject to external lifestyle pressures. These pressures are relieved or exacerbated by choices students make around their approaches to study, and the amount of time they devote to work and leisure. This Chapter considers results from a 2012 survey of law students at the University of New South Wales (UNSW), Sydney, Australia. Those results are compared to results from a similar US law student survey, and comparable data from the UK and Australia more broadly. In addition, the UNSW study compares key lifestyle choices of undergraduate (LLB) and graduate (JD) law students. The significance of the analysis in this Chapter for understanding law students’ wellbeing is that comparing American and Australian law students’ lifestyle patterns provides insights into contextual variation between both groups, which is important to bear in mind when comparing American and Australian research on law students’ wellbeing, and appreciating the limits of such comparisons. In particular, much of the wellbeing literature to date has focused on course-based stressors, but in light of recent research indicating that improvements in students’ course-based experiences may not have a direct effect on law students’ elevated levels of psychological distress, it is important to understand the broader life pressures and stressors that may be impacting law students’ wellbeing.

Enhancing the learning experiences through Industry-Based Learning from Indonesian university perspective

This paper investigates how students’ learning experience can be enhanced by participating in the Industry-Based Learning (IBL) program. In this program, the university students coming into the industry to experience how the business is run. The students’ learning media is now not coming from the textbooks or the lecturers but from learning by doing. This new learning experience could be very interesting for students but at the same time could also be challenging. The research involves interviewing a number of students from the IBL programs, the academic staff from the participated university who has experience in supervising students and the employees of the industry who supported and supervised the students in their work placements. The research findings offer useful insights and create new knowledge in the field of education and learning. The research contributes to the existing knowledge by providing a new understanding of the topic as it applied to the Indonesian context.

Regulating Food Consumption : Studies of change and variation in Europe

The role of people as buyers and eaters of food has changed significantly. From being protected by a paternalistic welfare state, people appear to be accorded more freedom and responsibility as individuals, where attention is redirected from the state towards market relations. Many have asserted that these changes are accompanied by fragmentation, individualisation, and privatisation, leading to individual uncertainty and lack of confidence. But empirical observations do not always confirm this, distrust is not necessarily growing and while responsibilities may change, the state still plays an active role. This dissertation explores changing relationships between states and markets, on the one hand, and ordinary people in their capacities as consumers and citizens, on the other. Do we see the emergence of new forms of regulation of food consumption? If so, what is the scope and what are the characteristics? Theories of regulation addressing questions about individualisation and self-governance are combined with a conceptualisation of consumption as processes of institutionalisation, involving daily routines, the division of labour between production and consumption, and the institutional field in which consumption is embedded. The analyses focus on the involvement of the state, food producers and scientific, first of all nutritional, expertise in regulating consumption, and on popular responses. Two periods come out as important, first when the ideas of “designing the good life” emerged, giving the state a very particular role in regulating food consumption, and, second, when this “designing” is replaced by ideas of choice and individual responsibility. One might say that “consumer choice” has become a mode of regulation. I use mainly historical studies from Norway to analyse the shifting role of the state in regulating food consumption, complemented with population surveys from six European countries to study how modernisation processes are associated with trust. The studies find that changing regulation is not only a question of societal or state vs individual responsibilities. Degrees of organisation and formalisation are important as well. While increasing organisation may represent discipline and abuses of power (including exploitation of consumer loyalty), organisation can also, to the consumer, provide higher predictability, systems to deal with malfeasance, and efficiency which may provide conditions for acting. The welfare state and the neo-liberal state have very different types of solutions. The welfare state solution is based on (national) egalitarianism, paternalism and discipline (of the market as well as households). Such solutions are still prominent in Norway. Individualisation and self-regulation may represent a regulatory response not only to a declining legitimacy of this kind of interventionism, but also increasing organisational complexity. This is reflected in large-scale re-regulation of markets as well as in relationships with households and consumers. Individualisation of responsibility is to the consumer not a matter of the number of choices that are presented on the shelves, but how choice as a form of consumer based involvement is institutionalised. It is recognition of people as “end-consumers”, as social actors, with systems of empowerment politically as well as via the provisioning system. ‘Consumer choice’ as a regulatory strategy includes not only communicative efforts to make people into “choosing consumers”, but also the provision of institutions which recognise consumer interests and agency. When this is lacking we find distrust as representing powerlessness. Individual responsibility-taking represents agency and is not always a matter of loyal support to shared goals, but involves protest and creativity. More informal (‘communitarian’) innovations may be an indication of that, where self-realisation is intimately combined with responsibility for social problems. But as solutions to counteract existing imbalances of power in the food market the impacts of such initiatives are probably more as part of consumer mobilisation and politicisation than as alternative provisioning.

Studies on Binary Time Series Models with Applications to Empirical Macroeconomics and Finance

This thesis studies binary time series models and their applications in empirical macroeconomics and finance. In addition to previously suggested models, new dynamic extensions are proposed to the static probit model commonly used in the previous literature. In particular, we are interested in probit models with an autoregressive model structure. In Chapter 2, the main objective is to compare the predictive performance of the static and dynamic probit models in forecasting the U.S. and German business cycle recession periods. Financial variables, such as interest rates and stock market returns, are used as predictive variables. The empirical results suggest that the recession periods are predictable and dynamic probit models, especially models with the autoregressive structure, outperform the static model. Chapter 3 proposes a Lagrange Multiplier (LM) test for the usefulness of the autoregressive structure of the probit model. The finite sample properties of the LM test are considered with simulation experiments. Results indicate that the two alternative LM test statistics have reasonable size and power in large samples. In small samples, a parametric bootstrap method is suggested to obtain approximately correct size. In Chapter 4, the predictive power of dynamic probit models in predicting the direction of stock market returns are examined. The novel idea is to use recession forecast (see Chapter 2) as a predictor of the stock return sign. The evidence suggests that the signs of the U.S. excess stock returns over the risk-free return are predictable both in and out of sample. The new "error correction" probit model yields the best forecasts and it also outperforms other predictive models, such as ARMAX models, in terms of statistical and economic goodness-of-fit measures. Chapter 5 generalizes the analysis of univariate models considered in Chapters 2 4 to the case of a bivariate model. A new bivariate autoregressive probit model is applied to predict the current state of the U.S. business cycle and growth rate cycle periods. Evidence of predictability of both cycle indicators is obtained and the bivariate model is found to outperform the univariate models in terms of predictive power.

The sources of moral motivation : studies on empathy, guilt, shame and values

The goals of this study were to analyze the forms of emotional tendencies that are likely to motivate moral behaviors, and to find correlates for these tendencies. In study 1, students narratives of their own guilt or shame experiences were analyzed. The results showed that pure shame was more likely to motivate avoidance than reparation, whereas guilt and combination of guilt and shame were likely to motivate reparation. However, all types of emotion could lead to chronic rumination if the person was not clearly responsible for the situation. In study 2, the relations of empathy with two measures of guilt were examined in a sample of 13- to 16-year-olds (N=113). Empathy was measured using Davis s IRI and guilt by Tangney s TOSCA and Hoffman s semi-projective story completion method that includes two different scenarios, guilt over cheating and guilt over inaction. Empathy correlated more strongly with both measures of guilt than the two measures correlated with each other. Hoffman s guilt over inaction was more strongly associated with empathy measures in girls than in boys, whereas for guilt over cheating the pattern was the opposite. Girls and boys who describe themselves as empathetic may emphasize different aspect of morality and feel guilty in different contexts. In study 3, cultural and gender differences in guilt and shame (TOSCA) and value priorities (the Schwartz Value Survey) were studied in samples of Finnish (N=156) and Peruvian (N=159) adolescents. Gender differences were found to be larger and more stereotypical among the Finns than among the Peruvians. Finnish girls were more prone to guilt and shame than boys were, whereas among the Peruvians there was no gender difference in guilt, and boys were more shame-prone than girls. The results support the view that psychological gender differences are largest individualistic societies. In study 4, the relations of value priorities to guilt, shame and empathy were examined in two samples, one of 15 19-year-old high school students (N = 207), and the other of military conscripts (N = 503). Guilt was, in both samples, positively related to valuing universalism, benevolence, tradition, and conformity, and negatively related to valuing power, hedonism, stimulation, and self-direction. The results for empathy were similar, but the relation to the openness conservation value dimension was weaker. Shame and personal distress were weakly related to values. In sum, shame without guilt and the TOSCA shame scale are tendencies that are unlikely to motivate moral behavior in Finnish cultural context. Guilt is likely to be connected to positive social behaviors, but excessive guilt can cause psychological problems. Moral emotional tendencies are related to culture, cultural conceptions of gender and to individual value priorities.