Análisis de las actividades turísticas que se desarrollan en el Biocorredor Yanuncay para determinar su sostenibilidad

Esta investigación se centra en el análisis de las tres actividades turísticas principales que se desarrollan a lo largo del BiocorredorYanuncay, perteneciente a la parroquia San Joaquín, Cantón Cuenca, provincia del Azuay. La restauración, el cultivo de huertos orgánicos y la cestería, serán estudiadas desde el punto de vista de la sostenibilidad, considerando a esta como parte fundamental para la gestión de todo tipo de emprendimiento. La aplicación de la sostenibilidad al turismo ha contribuido para que los prestadores de servicios y los turistas opten por una mentalidad más consciente, no únicamente en el ámbito ambiental sino también en el sociocultural y económico, que unidos forman un modelo de desarrollo equilibrado en el cual todos resultan beneficiados. La guía de “Buenas Prácticas de Turismo Sostenible” elaborada por la organización RainforestAliance, ha sido primordial para realizar el análisis. Dentro de este documento se encuentran expuestas buenas prácticas que se relacionan a cada pilar de la sostenibilidad, las mismas que deben ser consideradas por todos los emprendimientos turísticos para que puedan permanecer en el tiempo. Al identificar las falencias de los prestadores de servicios turísticos del Biocorredor en el área de la sostenibilidad, se plantea trabajar en propuestas que ayuden a los emprendedores a mejorar la experiencia del turista, aprovechando los recursos culturales y naturales de la zona.

O esverdeamento da economia e os tributos verdes : um duro caminho rumo à sustentabilidade da gestão dos resíduos sólidos urbanos (RSU)

Tese (doutorado)—Universidade de Brasília, Centro de Desenvolvimento Sustentável, 2013.

European Agroforestry Conference. 3rd. Book of Abstracts

Agroforestry is considered nowadays as a sustainable form of land management that is being promoted by different global institutions like FAO and its Global Alliance Smart Climate Agriculture to mitigate and adaptate to Climate change. The European Commission through the protection of landscape features, greening and Rural Development Programs is promoting the essential presence of woody vegetation across Europe, but in a way that is difficult to recognize by farmers. AGROFE and AGFORWARD projects are both demonstrating the important value of Agroforestry at European level, which together with EURAF are pushing European Commission to include measures enhancing Agroforestry. However, there is a need of a European Agroforestry Strategy that recognizes the drawbacks of Agroforestry to be implemented at European level. This strategy should include the main mechanisms to show farmers how to implement it and at the same time to get funded for the important ecosystem services that they provide when implementing agroforestry. AGFORWARD project has identified the main agroforestry practices in Europe, highlighting silvopasture, but showing the importance that others forms of agroforestry have to play like homegardens with multipurpose trees, or the adequate improvement of fallow lands where woody vegetation can enhance the levels of organic matter in the soil if adequately managed. AGFORWARD also shows the lack of information of the real implementation of agroforestry practices like forest farming, in spite of the important productive and ecosystem benefits it provides. EURAF through the participation in the different civil dialogue groups (CAP, Direct Payments and Greening, Forestry and Cork, Organic Farming, Arable, Environment and Climate Change and Rural Development) has included and promoted agroforestry within the European Agenda. The role of Agroforestry has been also enhanced in the Groups of experts of European Structural and Investments funds and as part of the European Network for Rural Development and its derived groups: innovation, evaluation and CLLD/LEADER. EURAF is pleased to announce that Agroforestry will be discussed as part of a focus group of the European Innovation Partnership, so, apply and join the group. This book represents the lastest findings on agroforestry in Europe, integrating the participation of researchers but also policy makers and farmers and farmers' associations. It was a pleasure for EURAF to integrate all this needed knowledge to be disseminated at European levels. On behalf of EURAF, I wish all of you a successful meeting and invite you to strengthen agroforestry within the different European Union countries when you go back home. Rosa Mosquera-LOSADA President of EURAF

Integrated pest management and the (un)sustainable use of pesticides

Doutoramento em Engenharia Agronómica - Instituto Superior de Agronomia - UL

Copper Nanoparticles in Click Chemistry

Conspectus: The challenges of the 21st century demand scientific and technological achievements that must be developed under sustainable and environmentally benign practices. In this vein, click chemistry and green chemistry walk hand in hand on a pathway of rigorous principles that help to safeguard the health of our planet against negligent and uncontrolled production. Copper-catalyzed azide–alkyne cycloaddition (CuAAC), the paradigm of a click reaction, is one of the most reliable and widespread synthetic transformations in organic chemistry, with multidisciplinary applications. Nanocatalysis is a green chemistry tool that can increase the inherent effectiveness of CuAAC because of the enhanced catalytic activity of nanostructured metals and their plausible reutilization capability as heterogeneous catalysts. This Account describes our contribution to click chemistry using unsupported and supported copper nanoparticles (CuNPs) as catalysts prepared by chemical reduction. Cu(0)NPs (3.0 ± 1.5 nm) in tetrahydrofuran were found to catalyze the reaction of terminal alkynes and organic azides in the presence of triethylamine at rates comparable to those achieved under microwave heating (10–30 min in most cases). Unfortunately, the CuNPs underwent dissolution under the reaction conditions and consequently could not be recovered. Compelling experimental evidence on the in situ generation of highly reactive copper(I) chloride and the participation of copper(I) acetylides was provided. The supported CuNPs were found to be more robust and efficient catalyst than the unsupported counterpart in the following terms: (a) the multicomponent variant of CuAAC could be applied; (b) the metal loading could be substantially decreased; (c) reactions could be conducted in neat water; and (d) the catalyst could be recovered easily and reutilized. In particular, the catalyst composed of oxidized CuNPs (Cu2O/CuO, 6.0 ± 2.0 nm) supported on carbon (CuNPs/C) was shown to be highly versatile and very effective in the multicomponent and regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles in water from organic halides as azido precursors; magnetically recoverable CuNPs (3.0 ± 0.8 nm) supported on MagSilica could be alternatively used for the same purpose under similar conditions. Incorporation of an aromatic substituent at the 1-position of the triazole could be accomplished using the same CuNPs/C catalytic system starting from aryldiazonium salts or anilines as azido precursors. CuNPs/C in water also catalyzed the regioselective double-click synthesis of β-hydroxy-1,2,3-triazoles from epoxides. Furthermore, alkenes could be also used as azido precursors through a one-pot CuNPs/C-catalyzed azidosulfenylation–CuAAC sequential protocol, providing β-methylsulfanyl-1,2,3-triazoles in a stereo- and regioselective manner. In all types of reaction studied, CuNPs/C exhibited better behavior than some commercial copper catalysts with regard to the metal loading, reaction time, yield, and recyclability. Therefore, the results of this study also highlight the utility of nanosized copper in click chemistry compared with bulk copper sources.

The influence of organic amendments on soil aggregate stability from semiarid sites

Restoring the native vegetation is the most effective way to regenerate soil health. Under these conditions, vegetation cover in areas having degraded soils may be better sustained if the soil is amended with an external source of organic matter. The addition of organic materials to soils also increases infiltration rates and reduces erosion rates; these factors contribute to an available water increment and a successful and sustainable land management. The goal of this study was to analyze the effect of various organic amendments on the aggregate stability of soils in afforested plots. An experimental paired-plot layout was established in southern of Spain (homogeneous slope gradient: 7.5%; aspect: N170). Five amendments were applied in an experimental set of plots: straw mulching; mulch with chipped branches of Aleppo Pine (Pinus halepensis L.); TerraCotten hydroabsobent polymers; sewage sludge; sheep manure and control. Plots were afforested following the same spatial pattern, and amendments were mixed with the soil at the rate 10 Mg ha-1. The vegetation was planted in a grid pattern with 0.5 m between plants in each plot. During the afforestation process the soil was tilled to 25 cm depth from the surface. Soil from the afforested plots was sampled in: i) 6 months post-afforestation; ii) 12 months post-afforestation; iii) 18 months post-afforestation; and iv) 24 months post-afforestation. The sampling strategy for each plot involved collection of 4 disturbed soil samples taken from the surface (0–10 cm depth). The stability of aggregates was measured by wet-sieving. Regarding to soil aggregate stability, the percentage of stable aggregates has increased slightly in all the treatments in relation to control. Specifically, the differences were recorded in the fraction of macroaggregates (≥ 0.250 mm). The largest increases have been associated with straw mulch, pinus mulch and sludge. Similar results have been registered for the soil organic carbon content. Independent of the soil management, after six months, no significant differences in microaggregates were found regarding to the control plots. These results showed an increase in the stability of the macroaggregates when soil is amended with sludge, pinus mulch and straw much. This fact has been due to an increase in the number cementing agents due to: (i) the application of pinus, straw and sludge had resulted in the release of carbohydrates to the soil; and thus (ii) it has favored the development of a protective vegetation cover, which has increased the number of roots in the soil and the organic contribution to it.

Major factors affecting waste generation on construction sites in Iran

Construction and demolition (C&D) waste account for a large share of total solid waste sent to the environment. As a result, effective C&D waste management has been treated as one of the available avenues towards sustainable development. Yet, C&D waste management within the Iranian construction industry has been literally overlooked by investigators. As one of the first studies in Iran, the main causes of generating C&D waste on construction projects have been identified through a review of literature. Afterwards, the list has been subjected to the scrutiny of 101 experts in the field deploying a questionnaire survey. The findings revealed that important causes of C&D waste generation on construction sites were all associated with lack of skills and experience of construction workers and lack of awareness of the concept of waste and values of construction materials. No discrepancy in terms of causes of waste generation was observed among different tiers of construction companies in the Iranian construction industry. The paper concludes with providing a number of guidelines to address the issues as identified for Iran and other developing countries suffering from the same problems.

Health systems change in 2010

Whilst health science, epidemiology and public health developments have forged enormous progress in understanding, prevention and cure in the health care area we still appear to lack the motivation to tackle the fundamental antecedents of many of our emerging population-based community health problems; the prevention of chronic illness being a prime example.

In spite of much progress in the area of health science, the social, economic and evolutionary forces that cast our physical being in the world still remain poorly understood or accepted in the health care arena. However, if our health care systems are to be manageable and sustainable in the future, these wider antecedents of our health status and wellbeing must be factored more fundamentally in to our management models with more effort being put into preventing lifestyle related chronic illnesses than is currently the case.

As in the past where public health infrastructure innovations such as running water and efficient waste disposal systems served to add greatly to the wellbeing of individuals and communities, we now need to make similar efforts to control preventable illnesses such as metabolic syndrome, type 2 diabetes and lifestyle related cardio-vascular disease at their source rather than waiting until the manifestation of these conditions require major medical and chemical intervention and management before we act. Our young people are at risk of early onset chronic conditions as a result of their emerging sedentary lifestyles, un-healthy dietary habits and health related behaviours, yet we continue to concentrate our health management effort on managing those with existing chronic conditions while leaving younger generations with lifestyle practices and behaviours that pre-dispose individuals to developing chronic illness earlier and earlier in their lives.

It is time we took notice of these emerging trends and began expending more effort to prevent what are essentially lifestyle related illnesses that can be eliminated before they become endemic. By concentrating more upon the social and environmental factors affecting our illness profiles as well as upon dealing more effectively with those who are already suffering from chronic illness we will reduce the need for major end-stage interventions and alleviate the impact and cost of early onset chronic disease. To achieve this new population health vision in Australia at least, we will not only need to utilize the new government funding structures more effectively; those structures that support coordination and more effective management of care, but also take a much broader, environmental and social view of cause and effect in relation to the health of populations.

Characterization and identification of phenol degrading bacteria isolated from industrial waste

Phenol is a toxic organic pollutant to living cells and its biodegradation is considered the best method due to its environment friendly nature and cost effectiveness. In this study, eight bacterial strains were isolated through enrichment on mineral salt media supplemented with 300 mgL -1 phenol. The isolated strains were identified by 16S rRNA gene sequence analysis and belonged to genera: Rhodococcus, Stenotrophomonas, Lysinibacillus, Comamonas, Microbacterium, Pseudomonas and Halomonas. The results of phenol biodegradation experiments (conducted at pH 7 and 30°C temperature) showed that the strains could degrade 750 mg L -1 phenol within 40 to 96 hours. The average phenol degradation rate by the strains was 12.5 to 34.8 mgL -1 h-1. The most rapid phenol degradation was observed for Rhodococcus sp. NCCP-309 and Rhodococcus sp. NCCP-312, whereas, Stenotrophomonas sp. NCCP-311, Lysinibacillus sp. NCCP-313, Comamonas sp. NCCP-314 and Microbacterium sp. NCCP-351 took longer time in phenol degradation. The results of our study suggested that these strains are efficient in phenol biodegradation and can be used for the bioremediation of waste water containing phenol.

Previous land use and climate influence differences in soil organic carbon following reforestation of agricultural land with mixed-species plantings

Reforestation of agricultural land with mixed-species environmental plantings (native trees and shrubs) can contribute to mitigation of climate change through sequestration of carbon. Although soil carbon sequestration following reforestation has been investigated at site- and regional-scales, there are few studies across regions where the impact of a broad range of site conditions and management practices can be assessed. We collated new and existing data on soil organic carbon (SOC, 0-30 cm depth, N = 117 sites) and litter (N = 106 sites) under mixed-species plantings and an agricultural pair or baseline across southern and eastern Australia. Sites covered a range of previous land uses, initial SOC stocks, climatic conditions and management types. Differences in total SOC stocks following reforestation were significant at 52% of sites, with a mean rate of increase of 0.57 ± 0.06 Mg C ha-1 y-1. Increases were largely in the particulate fraction, which increased significantly at 46% of sites compared with increases at 27% of sites for the humus fraction. Although relative increase was highest in the particulate fraction, the humus fraction was the largest proportion of total SOC and so absolute differences in both fractions were similar. Accumulation rates of carbon in litter were 0.39 ± 0.02 Mg C ha-1 y-1, increasing the total (soil + litter) annual rate of carbon sequestration by 68%. Previously-cropped sites accumulated more SOC than previously-grazed sites. The explained variance differed widely among empirical models of differences in SOC stocks following reforestation according to SOC fraction and depth for previously-grazed (R2 = 0.18-0.51) and previously-cropped (R2 = 0.14-0.60) sites. For previously-grazed sites, differences in SOC following reforestation were negatively related to total SOC in the pasture. By comparison, for previously-cropped sites, differences in SOC were positively related to mean annual rainfall. This improved broad-scale understanding of the magnitude and predictors of changes in stocks of soil and litter C following reforestation is valuable for the development of policy on carbon markets and the establishment of future mixed-species environmental plantings.

An Investigation of Waste Glass-Based Geopolymers Supplemented with Alumina

An increased consideration of sustainability throughout society has resulted in a surge of research investigating sustainable alternatives to existing construction materials. A new binder system, called a geopolymer, is being investigated to supplement ordinary portland cement (OPC) concrete, which has come under scrutiny because of the CO2 emissions inherent in its production. Geopolymers are produced from the alkali activation of a powdered aluminosilicate source by an alkaline solution, which results in a dense three-dimensional matrix of tetrahedrally linked aluminosilicates. Geopolymers have shown great potential as a building construction material, offering similar mechanical and durability properties to OPC. Additionally, geopolymers have the added value of a considerably smaller carbon footprint than OPC. This research considered the compressive strength, microstructure and composition of geopolymers made from two types of waste glass with varying aluminum contents. Waste glass shows great potential for mainstream use in geopolymers due to its chemical and physical homogeneity as well as its high content of amorphous silica, which could eliminate the need for sodium silicate. However, the lack of aluminum is thought to negatively affect the mechanical performance and alkali stability of the geopolymer system. Mortars were designed using various combinations of glass and metakaolin or fly ash to supplement the aluminum in the system. Mortar made from the high-Al glass (12% Al2O3) reached over 10,000 psi at six months. Mortar made from the low-Al glass (<1% Al2O3) did not perform as well and remained sticky even after several weeks of curing, most likely due to the lack of Al which is believed to cause hardening in geopolymers. A moderate metakaolin replacement (25-38% by mass) was found to positively affect the compressive strength of mortars made with either type of glass. Though the microstructure of the mortar was quite indicative of mechanical performance, composition was also found to be important. The initial stoichiometry of the bulk mixture was maintained fairly closely, especially in mixtures made with fine glass. This research has shown that glass has great potential for use in geopolymers, when care is given to consider the compositional and physical properties of the glass in mixture design.

Sustainable Energy Production in the United States: Life Cycle Assessment of Biofuels and Bioenergy

The United States of America is making great efforts to transform the renewable and abundant biomass resources into cost-competitive, high-performance biofuels, bioproducts, and biopower. This is the key to increase domestic production of transportation fuels and renewable energy, and reduce greenhouse gas and other pollutant emissions. This dissertation focuses specifically on assessing the life cycle environmental impacts of biofuels and bioenergy produced from renewable feedstocks, such as lignocellulosic biomass, renewable oils and fats. The first part of the dissertation presents the life cycle greenhouse gas (GHG) emissions and energy demands of renewable diesel (RD) and hydroprocessed jet fuels (HRJ). The feedstocks include soybean, camelina, field pennycress, jatropha, algae, tallow and etc. Results show that RD and HRJ produced from these feedstocks reduce GHG emissions by over 50% compared to comparably performing petroleum fuels. Fossil energy requirements are also significantly reduced. The second part of this dissertation discusses the life cycle GHG emissions, energy demands and other environmental aspects of pyrolysis oil as well as pyrolysis oil derived biofuels and bioenergy. The feedstocks include waste materials such as sawmill residues, logging residues, sugarcane bagasse and corn stover, and short rotation forestry feedstocks such as hybrid poplar and willow. These LCA results show that as much as 98% GHG emission savings is possible relative to a petroleum heavy fuel oil. Life cycle GHG savings of 77 to 99% were estimated for power generation from pyrolysis oil combustion relative to fossil fuels combustion for electricity, depending on the biomass feedstock and combustion technologies used. Transportation fuels hydroprocessed from pyrolysis oil show over 60% of GHG reductions compared to petroleum gasoline and diesel. The energy required to produce pyrolysis oil and pyrolysis oil derived biofuels and bioelectricity are mainly from renewable biomass, as opposed to fossil energy. Other environmental benefits include human health, ecosystem quality and fossil resources. The third part of the dissertation addresses the direct land use change (dLUC) impact of forest based biofuels and bioenergy. An intensive harvest of aspen in Michigan is investigated to understand the GHG mitigation with biofuels and bioenergy production. The study shows that the intensive harvest of aspen in MI compared to business as usual (BAU) harvesting can produce 18.5 billion gallons of ethanol to blend with gasoline for the transport sector over the next 250 years, or 32.2 billion gallons of bio-oil by the fast pyrolysis process, which can be combusted to generate electricity or upgraded to gasoline and diesel. Intensive harvesting of these forests can result in carbon loss initially in the aspen forest, but eventually accumulates more carbon in the ecosystem, which translates to a CO2 credit from the dLUC impact. Time required for the forest-based biofuels to reach carbon neutrality is approximately 60 years. The last part of the dissertation describes the use of depolymerization model as a tool to understand the kinetic behavior of hemicellulose hydrolysis under dilute acid conditions. Experiments are carried out to measure the concentrations of xylose and xylooligomers during dilute acid hydrolysis of aspen. The experiment data are used to fine tune the parameters of the depolymerization model. The results show that the depolymerization model successfully predicts the xylose monomer profile in the reaction, however, it overestimates the concentrations of xylooligomers.

Emergence and fate of siloxanes in waste streams: Release mechanisms, partitioning and persistence in three environmental compartments

Siloxanes are widely used in personal care and industrial products due to their low surface tension, thermal stability, antimicrobial and hydrophobic properties, among other characteristics. Volatile methyl siloxanes (VMS) have been detected both in landfill gas and biogas from anaerobic digesters at wastewater treatment plants. As a result, they are released to gas phase during waste decomposition and wastewater treatment. During transformation processes of digester or landfill gas to energy, siloxanes are converted to silicon oxides, leaving abrasive deposits on engine components. These deposits cause increased maintenance costs and in some cases complete engine overhauls become necessary. ^ The objectives of this study were to compare the VMS types and levels present in biogas generated in the anaerobic digesters and landfills and evaluate the energetics of siloxane transformations under anaerobic conditions. Siloxane emissions, resulting from disposal of silicone-based materials, are expected to increase by 29% within the next 10 years. Estimated concentrations and the risk factors of exposure to siloxanes were evaluated based on the initial concentrations, partitioning characteristics and persistence. It was determined that D4 has the highest risk factor associated to bioaccumulation in liquid and solid phase, whereas D5 was highest in gas phase. Additionally, as siloxanes are combusted, the particle size range causes them to be potentially hazardous to human health. When inhaled, they may affix onto the alveoli of the lungs and may lead to development of silicosis. Siloxane-based COD-loading was evaluated and determined to be an insignificant factor concerning COD limits in wastewater. ^ Removal of siloxane compounds is recommended prior to land application of biosolids or combustion of biogas. A comparison of estimated costs was made between maintenance practices for removal of siloxane deposits and installation/operation of fixed-bed carbon absorption systems. In the majority of cases, the installation of fixed-bed adsorption systems would not be a feasible option for the sole purpose of siloxane removal. However they may be utilized to remove additional compounds simultaneously.^

The exploration of potato-associated bacteria in the Central Andean Highlands and their application in integrated crop management systems

Potato is the most important food crop after wheat and rice. A changing climate, coupled with a heightened consumer awareness of how food is produced and legislative changes governing the usage of agrochemicals, means that alternative more integrated and sustainable approaches are needed for crop management practices. Bioprospecting in the Central Andean Highlands resulted in the isolation and in vitro screening of 600 bacterial isolates. The best performing isolates, under in vitro conditions, were field trialled in their home countries. Six of the isolates, Pseudomonas sp. R41805 (Bolivia), Pseudomonas palleroniana R43631 (Peru), Bacillus sp. R47065, R47131, Paenibacillus sp. B3a R49541, and Bacillus simplex M3-4 R49538 (Ecuador), showed significant increase in the yield of potato. Using – omic technologies (i.e. volatilomic, transcriptomic, proteomic and metabolomic), the influence of microbial isolates on plant defence responses was determined. Volatile organic compounds of bacterial isolates were identified using GC/MS. RT-qPCR analysis revealed the significant expression of Ethylene Response Factor 3 (ERF3) and the results of this study suggest that the dual inoculation of potato with Pseudomonas sp. R41805 and Rhizophagus irregularis MUCL 41833 may play a part in the activation of plant defence system via ERF3. The proteomic analysis by 2-DE study has shown that priming by Pseudomonas sp. R41805 can induce the expression of proteins related to photosynthesis and protein folding in in vitro potato plantlets. The metabolomics study has shown that the total glycoalkaloid (TGA) content of greenhouse-grown potato tubers following inoculation with Pseudomonas sp. R41805 did not exceed the acceptable safety limit (200 mg kg-1 FW). As a result of this study, a number of bacteria have been identified with commercial potential that may offer sustainable alternatives in both Andean and European agricultural settings.

Engineering design of an integrated sustainable process system for cassava biobased materials

Cassava contributes significantly to biobased material development. Conventional approaches for its bio-derivative-production and application cause significant wastes, tailored material development challenges, with negative environmental impact and application limitations. Transforming cassava into sustainable value-added resources requires redesigning new approaches. Harnessing unexplored material source, and downstream process innovations can mitigate challenges. The ultimate goal proposed an integrated sustainable process system for cassava biomaterial development and potential application. An improved simultaneous release recovery cyanogenesis (SRRC) methodology, incorporating intact bitter cassava, was developed and standardized. Films were formulated, characterised, their mass transport behaviour, simulating real-distribution-chain conditions quantified, and optimised for desirable properties. Integrated process design system, for sustainable waste-elimination and biomaterial development, was developed. Films and bioderivatives for desired MAP, fast-delivery nutraceutical excipients and antifungal active coating applications were demonstrated. SRRC-processed intact bitter cassava produced significantly higher yield safe bio-derivatives than peeled, guaranteeing 16% waste-elimination. Process standardization transformed entire root into higher yield and clarified colour bio-derivatives and efficient material balance at optimal global desirability. Solvent mass through temperature-humidity-stressed films induced structural changes, and influenced water vapour and oxygen permeability. Sevenunit integrated-process design led to cost-effectiveness, energy-efficient and green cassava processing and biomaterials with zero-environment footprints. Desirable optimised bio-derivatives and films demonstrated application in desirable in-package O2/CO2, mouldgrowth inhibition, faster tablet excipient nutraceutical dissolutions and releases, and thymolencapsulated smooth antifungal coatings. Novel material resources, non-root peeling, zero-waste-elimination, and desirable standardised methodology present promising process integration tools for sustainable cassava biobased system development. Emerging design outcomes have potential applications to mitigate cyanide challenges and provide bio-derivative development pathways. Process system leads to zero-waste, with potential to reshape current style one-way processes into circular designs modelled on nature's effective approaches. Indigenous cassava components as natural material reinforcements, and SRRC processing approach has initiated a process with potential wider deployment in broad product research development. This research contributes to scientific knowledge in material science and engineering process design.