Determination of ubiquinone and tocopherol in heart, liver and muscle tissues of fresh water fish, Rohu (Labeo rohita, Hamilton)

The liver, heart and muscle tissues of Rohu, (Labeo rohita, Hamilton) were examined for their ubiquinone (UQ) and tocopherol contents. These three tissues contained respectively 11.60, 3.94 and 0.19 mg of ubiquinone and 10.16, 5.32 and 3.58 mg of tocopherol per 100 g. The 4% (V/V) of diethyl ether (EE) in light petroleum ether (PE) fractions of all three tissues on paper chromatographic separation gave spots having the same Rf value as standard ubiquinone-50 (UQ 10). Both the 4% and 6% (V/V) diethyl ether in light petroleum ether fraction of liver, heart and muscle tissues gave a single spot with the same Rf value as α – tocopherol.

Studies on the biochemical composition of some freshwater fishes. Pt. 1. Muscle

Twenty five different species belonging to l6 genera of freshwater fishes were analyzed for protein, fat, moisture, ash, carbohydrate, phosphorus, calcium and total iron content in their muscle. Calorific value for protein, fat and carbohydrate actions and total calories for each species were also calculated.

Biochemical composition of the muscle of some freshwater fishes during the pre-maturity phase

Biochemical composition of the muscle of juveniles belonging to 18 different species of freshwater fishes showed that the protein percentage in juveniles was higher than the adults. The fat, on the other hand, was much lower. This suggests that the body fat increases with the onset of maturity. No clear inverse relationship was found between fat and protein in juveniles. Moisture percentage was very high in juveniles. This was probably because of low fat content. In most species the sum of fat and water contents (F + W) was found to be constant. The percentages of ash, calcium and phosphorus were higher in juveniles than those of adults. Dry matter percentage varied inversely with the moisture and in most species carbohydrate was generally low. In juveniles although the calorific value of protein-fraction was high the total calorific value was lower than the adults.

Postmortem changes in hilsa fish. Pt. 1. Studies on rigor-mortis, typical yields and protein composition of dark and white muscle of hilsa fish (Tenualosa ilisha Ham.)

Hilsa (Hilsa ilisha) caught by gill net were immediately killed by cranial spiking. Three fish were kept in ice (0°C) and three other at room temperature (33°C) to follow development of rigor mortis and changes in muscle pH. The rest were frozen stored at -20°C. Rigor started 15 minutes after death in all fish and reached full rigor (100%) state in 2 and 4 hours respectively in fish kept at 33° and 0°C. The fish at 33°C deteriorated 16 hours after while in full rigor but those at 0°C lasted 26 hours of death without deterioration. Freshly caught hilsa had a muscle pH around 7 which decreased with time rapidly at 33°C and slowly at 0°C. The relative proportion of protein fraction in white and dark muscle of fish stored at 0°C and -20°C were also studied. The proportion of dark muscle was 30.34% of the white muscle. White muscle in fish at 0°C was found to contain 32.0% sarcoplasmic, 57.6% myofibrilla, 9.4% alkali-soluble and 1.1% stroma protein whereas these proteins in dark muscle were 29.9%, 58.4%, 9.8% and 1.9% respectively. The protein fractions of white muscle in frozen-fish were found 27.6% sarcoplasmic, 64.7% myofibrilla, 6.0% alkali-soluble and 1.7% of stroma protein whereas they were 30.6%, 58.6%, 8.9 and 1.9% for dark muscle. Some changes occurred in protein composition during frozen storage. The relative amounts of sarcoplasmic, alkali soluble and stroma protein fractions decreased while myofibrilla fraction increased in frozen condition. This may be attributed to drip loss of soluble protein during thawing.

158-μJ pulses from a single-transverse-mode, large-mode-area erbium-doped fiber amplifier

We report the amplification of 10-100-pJ semiconductor diode pulses to an energy of 158 μJ and peak powers >100 kW in a multistage fiber amplifier chain based on a single-mode, large-mode-area erbium-doped amplifier design. To our knowledge these results represent the highest single-mode pulse energy extracted from any doped-fiber system. © 1997 Optical Society of America.

Survival of Staphylococci on frozen fish

Using Staphylococcus aureus as the test culture it has been shown that cell injury occurs in two phases during freezing and storage at temperatures below freezing. Certain constituents of fish muscle appear to protect the cells during both phases of injury. The survival of bacteria on fish muscle is not influenced by the rate at which the fish muscle was frozen prior to inoculation. There was no significant difference between growth of bacteria on quick frozen and slow frozen fish muscle after thawing. However there appeared to be a slight tendency for the lag phase of growth to be extended on thawed quick frozen fish muscle when compared with thawed slow frozen muscle.

Viscoelastic microbuckling of fiber composites

A theoretical study is given of viscoelastic microbuckling of fiber composites. The analysis is formulated in terms of general linear viscoelastic behavior within the kink band. Material outside the kink band is assumed to behave elastically. Two specific forms of linear viscoelastic behavior are considered: a standard linear viscoelastic model and a logarithmically creeping model. Results are provided as deformation versus time histories and failure life versus applied stress. Failure is due to either the attainment of a critical failure strain in the kink band or to the intervention of a different failure mechanism such as plastic microbuckling.

High bandwidth multimode fiber links using subcarrier multiplexing in vertical-cavity surface-emitting lasers

The usage of subcarrier multiplexing (SCM) techniques to allow link transmission in excess of the specified fiber bandwidth is described. A series of 200-Mbit/s channels with carrier frequencies of up to more than twenty times the 3-dB fiber bandwidth have been successfully used, the maximum being limited by the available electronics. To assess the transmission of the fiber, digitally modulated channels are placed on high frequency carrier signals and then used to modulate a vertical-cavity surface-emitting lasers (VCSEL).

10-Gbit/s transmission over 300-m standard multimode fiber using multilevel coding and 2-channel WDM

A combination of multilevel coding schemes and simple two-channel wavelength division multiplexing (WDM) at 1300 and 1550 nm was used to transmit an aggregate of 10 Gbit/s over 300 m of multimode fiber that is typical of that employed in current Local Area Networks (LANs). It was shown that this technique could be a simple solution for achieving 10 Gigabit ethernet links over installed multimode fiber building backbones.

Subcarrier modulation for transmission of 1-Gbit/s channels over 500 m of 62.5-μm multimode fiber

The use of two different subcarriers at frequencies up to 5.5 GHz each transmitting 1 Gbit/s over 500 m of multimode fiber (MMF) is demonstrated. By transmitting the two subcarrier channels simultaneously alongside the baseband signal, an aggregate bit rate of 2.8 Gbit/s is possible.

Distributed optical fiber strain sensing in a secant piled wall

An optical fiber strain sensing technique, based on Brillouin Optical Time Domain Reflectometry (BOTDR), was used to obtain the full deformation profile of a secant pile wall during construction of an adjacent basement in London. Details of the installation of sensors as well as data processing are described. By installing optical fiber down opposite sides of the pile, the distributed strain profiles obtained can be used to give both the axial and lateral movements along the pile. Measurements obtained from the BOTDR were found in good agreement with inclinometer data from the adjacent piles. The relative merits of the two different techniques are discussed. © 2007 ASCE.

Monitoring tunnel deformation induced by close-proximity bored tunneling using distributed optical fiber strain measurements

The paper describes the use of optical fiber Brillouin Optical Time Domain Reflectometry (BOTDR) to monitor the strain distribution in an existing tunnel while a twin tunnel was bored at close-proximity. The twin circular bored tunnels between Serangoon and Bartley stations on the new Circle Line Stage 3 subway in Singapore were constructed at close-proximity to avoid underpinning the foundations of adjacent buildings. The minimum clear separation of the two tunnels is 2.3m (0.4 times the tunnel diameter). The Outer Tunnel was constructed first, followed by the Inner Tunnel, with the earth-pressure balance tunnel boring machines maintained at a minimum of 100m apart. In this trial application of BOTDR, the strain distribution along the Outer Tunnel was measured, in order to monitor its deformation due to the boring of the Inner Tunnel at close-proximity. The aim of the trial application was to determine the practicality of this monitoring method for future use in 'live' tunnels. This paper compares the measurements obtained from optical fiber BOTDR with conventional methods of tunnel monitoring and describes preliminary installation and workmanship guidelines derived from lessons learnt during this trial. © 2007 ASCE.