Confocal laser scanning microscopy elucidation of the micromorphology of the leaf cuticle and analysis of its chemical composition

Electron microscopy techniques such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM) have been invaluable tools for the study of the micromorphology of plant cuticles. However, for electron microscopy, the preparation techniques required may invariably introduce artefacts in cuticle preservation. Further, there are a limited number of methods available for quantifying the image data obtained through electron microscopy. Therefore, in this study, optical microscopy techniques were coupled with staining procedures and, along with SEM were used to qualitatively and quantitatively assess the ultrastructure of plant leaf cuticles. Leaf cryosections of Triticum aestivum (wheat), Zea mays (maize), and Lupinus angustifolius (lupin) were stained with either fat-soluble azo stain Sudan IV or fluorescent, diarylmethane Auramine O and were observed under confocal laser scanning microscope (CLSM). For all the plant species tested, the cuticle on the leaf surfaces could be clearly resolved in many cases into cuticular proper (CP), external cuticular layer (ECL), and internal cuticular layer (ICL). Novel image data analysis procedures for quantifying the epicuticular wax micromorphology were developed, and epicuticular waxes of L. angustifolius were described here for the first time. Together, application of a multifaceted approach involving the use of a range of techniques to study the plant cuticle has led to a better understanding of cuticular structure and provides new insights into leaf surface architecture.

An overview of new progresses in understanding pipeline corrosion

An approach to achieving the ambitious goal of cost effectively extending the safe operation life of energy pipeline to 100 years is the application of health monitoring and life prediction tools that are able to provide both long-term remnant pipeline life prediction and in-situ pipeline condition monitoring. A critical step is the enhancement of technological capabilities that are required for understanding and quantifying the effects of key factors influencing buried steel pipeline corrosion and environmentally assisted materials degradation, and the development of condition monitoring technologies that are able to provide in-situ monitoring and site-specific warning of pipeline damage. This paper provides an overview of our current research aimed at developing new sensors and electrochemical cells for monitoring, categorising and quantifying the level and nature of external pipeline and coating damages under the combined effects of various inter-related variables and processes such as localised corrosion, coating cracking and disbondment, cathodic shielding, transit loss of cathodic protection.

Experimental foot-and-mouth disease virus infection in white tailed deer

White tailed deer (Odocoileus virginianus) were inoculated with foot-and-mouth disease virus (FMDV) O UKG 11/2001 and monitored for the development of clinical signs, histopathological changes and levels of virus replication. All FMDV-infected deer developed clinical signs starting at 2 days post inoculation and characterized by an increase in body temperature, increased salivation and lesions in the mouth and on the feet. Virus spread to various tissues was determined by quantifying the amount of FMDV RNA using quantitative reverse transcriptase polymerase chain reaction. Virus or viral antigen was also detected in tissues using traditional isolation techniques, enzyme linked immunosorbent assay and immunohistochemistry. Deer-to-cattle transmission of the virus was observed in this experimental setting; however, inoculated deer were not found to become carriers of FMDV.

An integrative framework for the appraisal of coloration in nature

The world in color presents a dazzling dimension of phenotypic variation. Biological interest in this variation has burgeoned, due to both increased means for quantifying spectral information and heightened appreciation for how animals view the world differently than humans. Effective study of color traits is challenged by how to best quantify visual perception in nonhuman species. This requires consideration of at least visual physiology but ultimately also the neural processes underlying perception. Our knowledge of color perception is founded largely on the principles gained from human psychophysics that have proven generalizable based on comparative studies in select animal models. Appreciation of these principles, their empirical foundation, and the reasonable limits to their applicability is crucial to reaching informed conclusions in color research. In this article, we seek a common intellectual basis for the study of color in nature. We first discuss the key perceptual principles, namely, retinal photoreception, sensory channels, opponent processing, color constancy, and receptor noise. We then draw on this basis to inform an analytical framework driven by the research question in relation to identifiable viewers and visual tasks of interest. Consideration of the limits to perceptual inference guides two primary decisions: first, whether a sensory-based approach is necessary and justified and, second, whether the visual task refers to perceptual distance or discriminability. We outline informed approaches in each situation and discuss key challenges for future progress, focusing particularly on how animals perceive color. Given that animal behavior serves as both the basic unit of psychophysics and the ultimate driver of color ecology/evolution, behavioral data are critical to reconciling knowledge across the schools of color research.

Analysis of phasic and tonic electromyographic signal characteristics: electromyographic synthesis and comparison of novel morphological and linear-envelope approaches

The pattern of tonic and phasic components in an EMG signal reflects the underlying behaviour of the central nervous system (CNS) in controlling the musculature. One avenue for gaining a better understanding of this behaviour is to seek a quantitative characterisation of these phasic and tonic components. We propose that these signal characteristics can range between unvarying, tonic and intermittent, phasic activation through a continuum of EMG amplitude modulation. In this paper, we present two new algorithms for quantifying amplitude modulation: a linear-envelope approach, and a mathematical morphology approach. In addition we present an algorithm for synthesising EMG signals with known amplitude modulation. The efficacy of the synthesis algorithm is demonstrated using real EMG data. We present an evaluation and comparison of the two algorithms for quantifying amplitude modulation based on synthetic data generated by the proposed synthesis algorithm. The results demonstrate that the EMG synthesis parameters represent 91.9% and 96.2% of the variance of linear-envelopes extracted from lumbo-pelvic muscle EMG signals collected from subjects performing a repetitive-movement task. This depended, however, on the muscle and movement-speed considered (F=4.02, p<0.001). Coefficients of determination between input and output amplitude modulation variables were used to quantify the accuracy of the linear-envelope and morphological signal processing algorithms. The linear-envelope algorithm exhibited higher coefficients of determination than the most accurate morphological approach (and hence greater accuracy, T=8.16, p<0.001). Similarly, the standard deviation of the coefficients of determination was 1.691 times smaller (p<0.001). This signal processing algorithm represents a novel tool for the quantification of amplitude modulation in continuous EMG signals and can be used in the study of CNS motor control of the musculature in repetitive-movement tasks.

Tough decisions: Reproductive timing and output vary with individuals' physiology, behavior and past success in a social opportunistic breeder

This article is part of a Special Issue SBN 2014. Photoperiod and the hormonal response it triggers are key determinants of reproductive timing in birds. However, other cues and physiological traits may permit flexibility in the timing of breeding and perhaps facilitate adaptation to global change. Opportunistic breeders are excellent models to study the adaptive significance of this flexibility, especially at the individual level. Here, we sought to quantify whether particular male physiological and behavioral traits were linked to reproductive timing and output in wild-derived zebra finches. We repeatedly assessed male stress-induced corticosterone levels (CORT), basal metabolic rate (BMR), and activity before releasing them into outdoor aviaries and quantifying each pair's breeding timing, investment, and output over a seven-month period. Despite unlimited access to food and water, the colony breeding activity occurred in waves, probably due to interpair social stimulations. Pairs adjusted their inter-clutch interval and clutch size to social and temperature cues, respectively, but only after successful breeding attempts, suggesting a facultative response to external cues. When these effects were controlled for statistically or experimentally, breeding intervals were repeatable within individuals across reproductive attempts. In addition, males' first laying date and total offspring production varied with complex interactions between pre-breeding CORT, BMR and activity levels. These results suggest that no one trait is under selection but that, instead, correlational selection acts on hormone levels, metabolism, and behavior. Together our results suggest that studying inter-individual variation in breeding strategy and their multiple physiological and behavioral underpinnings may greatly improve our understanding of the mechanisms underlying the evolution of breeding decisions.

Utility of biological sensor tags in animal conservation

Electronic tags (both biotelemetry and biologging platforms) have informed conservation and resource management policy and practice by providing vital information on the spatial ecology of animals and their environments. However, the extent of the contribution of biological sensors (within electronic tags) that measure an animal's state (e.g., heart rate, body temperature, and details of locomotion and energetics) is less clear. A literature review revealed that, despite a growing number of commercially available state sensor tags and enormous application potential for such devices in animal biology, there are relatively few examples of their application to conservation. Existing applications fell under 4 main themes: quantifying disturbance (e.g., ecotourism, vehicular and aircraft traffic), examining the effects of environmental change (e.g., climate change), understanding the consequences of habitat use and selection, and estimating energy expenditure. We also identified several other ways in which sensor tags could benefit conservation, such as determining the potential efficacy of management interventions. With increasing sensor diversity of commercially available platforms, less invasive attachment techniques, smaller device sizes, and more researchers embracing such technology, we suggest that biological sensor tags be considered a part of the necessary toolbox for conservation. This approach can measure (in real time) the state of free-ranging animals and thus provide managers with objective, timely, relevant, and accurate data to inform policy and decision making.

Ocular exposure to UV-B in sunlight: the Melbourne Visual Impairment Project model

Quantification of ocular exposure to ultraviolet-B radiation (UV-B) has become an important public health issue, with reports that the ozone layer is being depleted worldwide. Ocular exposure to UV-B is determined by ambient UV-B levels, the duration of outdoor exposure, the proportion of ambient UV-B that reaches the eye, and the use of ocular protection. We have developed a simplified model for quantifying lifetime ocular UV-B exposure that can be used in large epidemiological surveys. Exposure to UV-B is assessed and quantified using a model based on personal exposure over the six summer months. Data available for a population-based sample of 1150 people in the age range 40-98 years revealed a distribution in average annual lifetime ocular UV-B exposure similar to that reported in a previous study on which this model is based, and also demonstrate that people can recall lifetime personal behaviour related to ocular protection. It takes 12 minutes on average to collect these data. This model can be employed by researchers worldwide for uniform assessment of ocular UV-B exposure.

Prediction interval-based control of nonlinear systems using neural networks

Prediction interval (PI) is a promising tool for quantifying uncertainties associated with point predictions. Despite its informativeness, the design and deployment of PI-based controller for complex systems is very rare. As a pioneering work, this paper proposes a framework for design and implementation of PI-based controller (PIC) for nonlinear systems. Neural network (NN)-based inverse model within internal model control structure is used to develop the PIC. Firstly, a PI-based model is developed to construct PIs for the system output. This model is then used as an online estimator for PIs. The PIs from this model are fed to the NN inverse model along with other traditional inputs to generate the control signal. The performance of the proposed PIC is examined for two case studies. This includes a nonlinear batch polymerization reactor and a numerical nonlinear plant. Simulation results demonstrated that the proposed PIC tracking performance is better than the traditional NN-based controller.

Structural health monitoring: a practical approach to achieving in-situ and site-specific warning of pipeline corrosion and coating failure

An approach to achieving the ambitious goal of cost effectively extending the safe operation life of energy pipelines to, for instance, 100 years is the application of structural health monitoring and life prediction tools that are able to provide long-term remnant pipeline life prediction and in-situ pipeline condition monitoring. A critical step in pipeline structural health monitoring is the enhancement of technological capabilities that are required for quantifying the effects of key factors influencing buried pipeline corrosion and environmentally assisted materials degradation, and the development of condition monitoring technologies that are able to provide in-situ monitoring and site-specific warning of pipeline damage. This paper provides an overview of our current research aimed at developing new sensors for monitoring, categorising and quantifying the level and nature of external pipeline and coating damages under the combined effects of various inter-related variables and processes such as localised corrosion, coating damage and disbondment, cathodic shielding. The concept of in-situ monitoring and site-specific warning of pipeline corrosion is illustrated by a case of monitoring localised corrosion under disbonded coatings using a new corrosion monitoring probe. A basic principle that underpins the use of sensors to monitor localised corrosion has been presented: Localised corrosion and coating failure are not an accidental occurrence, it occurs as the result of fundamental thermodynamic instability of a metal exposed to a specific environment. Therefore corrosion and coating disbondment occurring on a pipeline will also occur on a sensor made of the same material and exposed to the same pipeline condition. Although the exact location of localised corrosion or coating disbondment could be difficult to pinpoint along the length of a buried pipeline, the ‘worst-case scenario’ and high risk pipeline sections and sites are predictable. Sensors can be embedded at these strategic sites to collect data that contain ‘predictor features’ signifying the occurrence of localised corrosion, CP failure, coating disbondment and degradation. Information from these sensors will enable pipeline owners to prioritise site survey and inspection operations, and to develop maintenance strategy to manage aged pipelines, rather than replace them.

Estimating Stormwater Runoff for Community Gardens in New York City

While much of the literature cites community gardens as providing urban ecosystem services, there is very little research quantifying these benefits. This thesis compares the stormwater runoff rates of urban vacant lots, community gardens, and residential developments in New York City and evaluates community gardens as green infrastructure.

Avaliação de riscos em estratégias de investimentos de longo prazo: aplicação prática em um fundo de pensão

O tema central deste trabalho é a avaliação de riscos em estratégias de investimentos de longo prazo, onde a necessidade de um exemplo prático direcionou à aplicação de Asset Liability Models em fundos de pensão, mais especificamente, a planos de benefício definido. Com os instrumentos de análise apresentados, acreditamos que o investidor com um horizonte de retorno de longo prazo tenha uma percepção mais acurada dos riscos de mercado a que está exposto, permitindo uma seleção de carteiras mais adequada aos objetivos de gestão. Para tanto, a inclusão de variáveis de decisão que procuram quantificar os objetivos de gestão - indo além do modelo simplificado de média-variância - exerce papel de fundamental importância.

Uma abordagem empírica de um modelo matemático para avaliação de comportamentos

Esta dissertação pretende ser uma abordagem empírica para testar a validade de um modelo matemático para avaliação de comportamentos proposto por Ziviani (1974), quanto ao seu emprego para avaliar e quantificar respostas a questões de múltipla escolha, tendo como critério o modelo tradicional da psicometria clássica. É portanto, um estudo comparativo entre os resultados (escores) obtidos através deste modelo, por um lado, e através do método tradicional, em termos da dicotomia certo-errado, por outro. Visa mostrar como as variações no instrumento de medida (teste) ou instrumentos de medida com características diferentes determinam variações nos escores fornecidos pelos dois modelos e que estes escores são tanto mais equivalentes quanto "melhor" for o teste a que se referem.

Essays on monetary and banking theory

Esta tese de Doutorado é dedicada ao estudo de instabilidade financeira e dinâmica em Teoria Monet ária. E demonstrado que corridas banc árias são eliminadas sem custos no modelo padrão de teoria banc ária quando a popula ção não é pequena. É proposta uma extensão em que incerteza agregada é mais severa e o custo da estabilidade financeira é relevante. Finalmente, estabelece-se otimalidade de transições na distribui ção de moeda em economias em que oportunidades de trocas são escassas e heterogêneas. Em particular, otimalidade da inflação depende dos incentivos dinâmicos proporcionados por tais transi ções. O capí tulo 1 estabelece o resultado de estabilidade sem custos para economias grandes ao estudar os efeitos do tamanho populacional na an álise de corridas banc árias de Peck & Shell. No capí tulo 2, otimalidade de dinâmica é estudada no modelo de monet ário de Kiyotaki & Wright quando a sociedade é capaz de implementar uma polí tica inflacion ária. Apesar de adotar a abordagem de desenho de mecanismos, este capí tulo faz um paralelo com a an álise de Sargent & Wallace (1981) ao destacar efeitos de incentivos dinâmicos sobre a interação entre as polí ticas monet ária e fiscal. O cap ítulo 3 retoma o tema de estabilidade fi nanceira ao quanti car os custos envolvidos no desenho ótimo de um setor bancário à prova de corridas e ao propor uma estrutura informacional alternativa que possibilita bancos insolventes. A primeira an álise mostra que o esquema de estabilidade ótima exibe altas taxas de juros de longo prazo e a segunda que monitoramento imperfeito pode levar a corridas bancárias com insolvência.

Competitidade brasileira nas exportações fase 2: estudo exploratório

O Brasil vem se beneficiando nos últimos anos da expansão do comércio mundial, como mostram os frequentes recordes obtidos pela balança comercial do país. Porém, se as taxas de crescimento das exportações continuarem aumentando no mesmo ritmo nos próximos anos, os diversos gargalos que impactam negativamente o processo exportador brasileiro podem se agravar ainda mais. Baseada em dados coletados de 258 empresas exportadoras brasileiras, a partir de questionário desenvolvido especificamente para tal fim, essa pesquisa exploratória identificou, quantificou e hierarquizou os principais gargalos que diminuem a competitividade das exportações brasileiras. Esses gargalos foram classificados em grupos macroeconômicos, mercadológicos, idiossincráticos, logísticos, burocráticos, legais, tributários, informacionais e institucionais. A pesquisa se diferencia de trabalhos anteriores por ter sido aplicada a um público diretamente envolvido com as atividades e dificuldades do processo de exportação – os profissionais de comércio exterior – e por considerar toda a gama de gargalos que afetam as exportações. Os estudos anteriores foram sempre focados em certos tipos de gargalos.