The European Union and Assembling Biofuel Development – topological investigations concerning the associations between law, policy and space

Biofuels for transport are a renewable source of energy that were once heralded as a solution to multiple problems associated with poor urban air quality, the overproduction of agricultural commodities, the energy security of the European Union (EU) and climate change. It was only after the Union had implemented an incentivizing framework of legal and political instruments for the production, trade and consumption of biofuels that the problems of weakening food security, environmental degradation and increasing greenhouse gases through land-use changes began to unfold. In other words, the difference between political aims for why biofuels are promoted and their consequences has grown – which is also recognized by the EU policy-makers. Therefore, the global networks of producing, trading and consuming biofuels may face a complete restructure if the European Commission accomplishes its pursuit to sideline crop-based biofuels after 2020. My aim with this dissertation is not only to trace the manifold evolutions of the instruments used by the Union to govern biofuels but also to reveal how this evolution has influenced the dynamics of biofuel development. Therefore, I study the ways the EU’s legal and political instruments of steering biofuels are coconstitutive with the globalized spaces of biofuel development. My analytical strategy can be outlined through three concepts. I use the term ‘assemblage’ to approach the operations of the loose entity of actors and non-human elements that are the constituents of multi-scalar and -sectorial biofuel development. ‘Topology’ refers to the spatiality of this European biofuel assemblage and its parts whose evolving relations are treated as the active constituents of space, instead of simply being located in space. I apply the concept of ‘nomosphere’ to characterize the framework of policies, laws and other instruments that the EU applies and construes while attempting to govern biofuels. Even though both the materials and methods vary in the independent articles, these three concepts characterize my analytical strategy that allows me to study law, policy and space associated with each other. The results of my examinations underscore the importance of the instruments of governance of the EU constituting and stabilizing the spaces of producing and, on the other hand, how topological ruptures in biofuel development have enforced the need to reform policies. This analysis maps the vast scope of actors that are influenced by the mechanism of EU biofuel governance and, what is more, shows how they are actively engaging in the Union’s institutional policy formulation. By examining the consequences of fast biofuel development that are spatially dislocated from the established spaces of producing, trading and consuming biofuels such as indirect land use changes, I unfold the processes not tackled by the instruments of the EU. Indeed, it is these spatially dislocated processes that have pushed the Commission construing a new type of governing biofuels: transferring the instruments of climate change mitigation to land-use policies. Although efficient in mitigating these dislocated consequences, these instruments have also created peculiar ontological scaffolding for governing biofuels. According to this mode of governance, the spatiality of biofuel development appears to be already determined and the agency that could dampen the negative consequences originating from land-use practices is treated as irrelevant.

Planning and implementation of entrepreneurial marketing processes in SMEs

Entrepreneurial marketing is newly established term and there is need for more specific studies in order to understand the concept fully. SMEs have entrepreneurial marketing elements more visible in their marketing and therefore provide more fruitful insights for this research. SMEs marketing has gained more recognition during the past years and in some cases innovative characteristics can be identified despite constraints such as lack of certain resources. The purpose of this research is to study entrepreneurial marketing characteristics and SME processes in order to wider understanding and gain more insights of entrepreneurial marketing. In addition, planning and implementation of entrepreneurial marketing processes is examined in order to gain full coverage of SMEs marketing activities. The research was conducted as a qualitative research and data gathering was based on semi-structured interview survey, which involved nine company interviews. Multiple case research was used to analyze data so that focus and clarity could be maintained in organized manner. Case companies were chosen from different business fields so that more variation and insights could be identified. The empirical results suggest that two examined processes networking and word-of-mouth communication are very important processes for case companies which supports the previous researches. However, the entrepreneurial marketing characteristics had variation some were more visible and recognizable than others. Examining more closely the processes companies did not fully understand that networking or word-of-mouth marketing could be used as efficiently as other conventional marketing methods.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.

Strategic planning of major disturbance proof network

In the 2000’s Finland suffered from storms that caused long outages in electricity distribution, longest up to two weeks. These major disturbances increased the importance of supply security. In 2013 new Electricity Market Act was announced. It defined maximum duration for outages, 6 h for city plan areas and 36 h for other areas. The aim for this work is to determine required major disturbance proof level for a study area and find tools for prioritizing overhead lines for cabling renovation to improve supply security. Three prioritization methods were chosen to be studied: A: prioritization line sections by customer outage costs they cause, B: maximizing customers major disturbance proof network and C: minimizing excavation costs in medium voltage network. Profitability calculations showed that prioritization method A was the most profitable and C had the weakest profitability. The prioritization method C drove renovation into unreasonable locations in the study area in reliability point of view. Therefore universal rule prioritization methods couldn’t be made from the prioritization methods. This led to the conclusion that every renewing area need to be evaluated in a case by case basis.

Stiffness based trajectory planning and feedforward based vibration suppression control of parallel robot machines

The dissertation proposes two control strategies, which include the trajectory planning and vibration suppression, for a kinematic redundant serial-parallel robot machine, with the aim of attaining the satisfactory machining performance. For a given prescribed trajectory of the robot's end-effector in the Cartesian space, a set of trajectories in the robot's joint space are generated based on the best stiffness performance of the robot along the prescribed trajectory. To construct the required system-wide analytical stiffness model for the serial-parallel robot machine, a variant of the virtual joint method (VJM) is proposed in the dissertation. The modified method is an evolution of Gosselin's lumped model that can account for the deformations of a flexible link in more directions. The effectiveness of this VJM variant is validated by comparing the computed stiffness results of a flexible link with the those of a matrix structural analysis (MSA) method. The comparison shows that the numerical results from both methods on an individual flexible beam are almost identical, which, in some sense, provides mutual validation. The most prominent advantage of the presented VJM variant compared with the MSA method is that it can be applied in a flexible structure system with complicated kinematics formed in terms of flexible serial links and joints. Moreover, by combining the VJM variant and the virtual work principle, a systemwide analytical stiffness model can be easily obtained for mechanisms with both serial kinematics and parallel kinematics. In the dissertation, a system-wide stiffness model of a kinematic redundant serial-parallel robot machine is constructed based on integration of the VJM variant and the virtual work principle. Numerical results of its stiffness performance are reported. For a kinematic redundant robot, to generate a set of feasible joints' trajectories for a prescribed trajectory of its end-effector, its system-wide stiffness performance is taken as the constraint in the joints trajectory planning in the dissertation. For a prescribed location of the end-effector, the robot permits an infinite number of inverse solutions, which consequently yields infinite kinds of stiffness performance. Therefore, a differential evolution (DE) algorithm in which the positions of redundant joints in the kinematics are taken as input variables was employed to search for the best stiffness performance of the robot. Numerical results of the generated joint trajectories are given for a kinematic redundant serial-parallel robot machine, IWR (Intersector Welding/Cutting Robot), when a particular trajectory of its end-effector has been prescribed. The numerical results show that the joint trajectories generated based on the stiffness optimization are feasible for realization in the control system since they are acceptably smooth. The results imply that the stiffness performance of the robot machine deviates smoothly with respect to the kinematic configuration in the adjacent domain of its best stiffness performance. To suppress the vibration of the robot machine due to varying cutting force during the machining process, this dissertation proposed a feedforward control strategy, which is constructed based on the derived inverse dynamics model of target system. The effectiveness of applying such a feedforward control in the vibration suppression has been validated in a parallel manipulator in the software environment. The experimental study of such a feedforward control has also been included in the dissertation. The difficulties of modelling the actual system due to the unknown components in its dynamics is noticed. As a solution, a back propagation (BP) neural network is proposed for identification of the unknown components of the dynamics model of the target system. To train such a BP neural network, a modified Levenberg-Marquardt algorithm that can utilize an experimental input-output data set of the entire dynamic system is introduced in the dissertation. Validation of the BP neural network and the modified Levenberg- Marquardt algorithm is done, respectively, by a sinusoidal output approximation, a second order system parameters estimation, and a friction model estimation of a parallel manipulator, which represent three different application aspects of this method.

Management of Soft Information in Sales and Operations Planning

With a Sales and Operations Planning (S&OP) process, a company aims to manage the demand and supply by planning and forecasting. The studied company uses an integrated S&OP process to improve the company's operations. The aim of this thesis is to develop this business process by finding the best possible way to manage the soft information in S&OP, whilst also understanding the importance and types (assumptions, risks and opportunities) of soft information in S&OP. The soft information in S&OP helps to refine future S&OP planning, taking into account the uncertainties that affect the balance of the long-term demand and supply (typically 12-18 months). The literature review was used to create a framework for soft information management process in S&OP. There were not found a concrete way how to manage soft information in the existing literature. In consequence of the poor literature available the Knowledge Management literature was used as the base for the framework creation, which was seen in the very same type of information management like the soft information management is. The framework created a four-stage process to manage soft information in S&OP that included also the required support systems. First phase is collecting and acquiring soft information in S&OP, which include also categorization. The categorization was the cornerstone to identify different requirements that needs to be taken into consideration when managing soft information in S&OP process. The next phase focus on storing data, which purpose is to ensure the soft information is managed in a common system (support system) in a way that the following phase makes it available to users in S&OP who need by help of sharing and applications process. The last phase target is to use the soft information to understand assumptions and thoughts of users behind the numbers in S&OP plans. With this soft management process the support system will have a key role. The support system, like S&OP tool, ensures that soft information is stored in the right places, kept up-to-date and relevancy. The soft information management process in S&OP strives to improve the relevant soft information documenting behind the S&OP plans into the S&OP support system. The process offers an opportunity to individuals to review, comment and evaluate soft information in S&OP made by their own or others. In the case company it was noticed that without a properly documented and distributed soft information in S&OP it was seen to cause mistrust towards the planning.

Development of category planning process in construction business

The aim of this thesis was to develop the category planning process in the case company operating in construction industry. As the interest in the field of research has just recently started to emerge towards the benefits of category management and planning, the theoretical background was derived from literature of subjects with a relation to category planning i.e. procurement strategy, purchasing portfolio model, information flow management and cost analysis. The background for the development of category planning process was derived from retail industry, to where the category planning is more researched. The empirical study was executed with mixed method approach: quantitative data of the categories was analyzed and qualitative data was gathered through semi-structured interview and discussions within the case company. As a result, the category planning process was critically analyzed and development proposals addressed for improving the process description. Additionally a tool was developed based on the empirical study to support the category planning process of the case company.

The collective dimension of freedom of religion or belief in international law : the application of findings to the case of Turkey

Pertinent domestic and international developments involving issues related to tensions affecting religious or belief communities have been increasingly occupying the international law agenda. Those who generate and, thus, shape international law jurisprudence are in the process of seeking some of the answers to these questions. Thus the need for reconceptualization of the right to freedom of religion or belief continues as demands to the right to freedom of religion or belief challenge the boundaries of religious freedom in national and international law. This thesis aims to contribute to the process of “re-conceptualization” by exploring the notion of the collective dimension of freedom of religion or belief with a view to advance the protection of the right to freedom of religion or belief. The case of Turkey provides a useful test case where both the domestic legislation can be assessed against international standards, while at the same time lessons can be drawn for the improvement of the standard of international review of the protection of the collective dimension of freedom of religion or belief. The right to freedom of religion or belief, as enshrined in international human rights documents, is unique in its formulation in that it provides protection for the enjoyment of the rights “in community with others”.1 It cannot be realized in isolation; it crosses categories of human rights with aspects that are individual, aspects that can be effectively realized only in an organized community of individuals and aspects that belong to the field of economic, social and cultural rights such as those related to religious or moral education. This study centers on two primary questions; first, what is the scope and nature of protection afforded to the collective dimension of freedom of religion or belief in international law, and, secondly, how does the protection of the collective dimension of freedom of religion or belief in Turkey compare and contrast to international standards? Section I explores and examines the notion of the collective dimension of freedom of religion or belief, and the scope of its protection in international law with particular reference to the right to acquire legal personality and autonomy religious/belief communities. In Section II, the case study on Turkey constitutes the applied part of the thesis; here, the protection of the collective dimension is assessed with a view to evaluate the compliance of Turkish legislation and practice with international norms as well as seeking to identify how the standard of international review of the collective dimension of freedom of religion or belief can be improved.

Suomen mahdollisuudet vaikuttaa Euroopan unionin lainsäädäntömenettelyyn

Väitöstutkimuksen kohteena on säädösten valmistelu ja niitä koskevaa päätöksenteko Euroopan unionissa erityisesti siitä näkökulmasta, miten Suomen kaltainen pieni jäsenvaltio voi vaikuttaa EU-säädöksiin. Väitöskirjassa analysoidaan unionin toimielinten välillä vallitsevaa dynamiikkaa ja Suomen asemaa erityisesti EUT-sopimuksen 289 artiklan 1 kohdan ja 294 artiklan mukaisessa tavallisessa lainsäätämisjärjestyksessä. Lissabonin sopimuksen voimaantulon jälkeen tavallinen lainsäätämisjärjestys, joka aiemmin tunnettiin yhteispäätösmenettelynä, on selvästi yleisin lainsäädäntömenettely unionissa. Väitöskirja koostuu kuudesta erillisjulkaistusta pääosin vertaisarvioidusta artikkelista ja niitä täydentävästä ja kokoavasta yhteenveto-osasta. Kirjan tämä painos sisältää vain yhteenvetoluvun, ei erikseen julkaistuja artikkeleita. Väitöskirjassa hyödynnetään eurooppaoikeuden ja politiikan tutkimuksen kirjallisuutta. Metodologisesti väitöstutkimus edustaa empiiristä oikeustutkimusta, jossa yhdistyy lainopillinen analyysi ja empiiristen, tässä tapauksessa lähinnä laadullisten aineistojen analyysi. Yhteenvedossa on seurattu lainsäädäntömuutoksia ja oikeuskäytäntöä 10. huhtikuuta 2015 asti. Väitöskirjatutkimuksen kantavana teemana on oikeuden ja politiikan suhde EUlainsäätämisessä. Artikkeleita ja yhteenvetoa sitovat yhteen kaksi yleisen tason argumenttia. Ensiksi, EU:n lainsäädäntömenettelyä koskevat oikeussäännöt ja institutionalisoituneet käytännöt luovat kehikon toimielinten sisäiselle päätöksenteolle sekä niiden välisille poliittisluonteisille neuvotteluille, vaikkakaan sääntöihin ja käytäntöihin ei yleensä ole tarvetta nimenomaisesti vedota menettelyn kuluessa. Toiseksi, koska Suomen kaltaisen pienen jäsenvaltion muodollinen valta – siis äänimäärä neuvostossa – on hyvin rajallinen, suomalaisten ministerien ja virkamiesten tulisi hyödyntää erilaisia epävirallisia vaikuttamiskanavia, jos halutaan vahvistaa Suomen tosiasiallista vaikutusvaltaa menettelyssä. Unionin lainsäädäntötoiminta ei tyypillisesti ole rationaalisen mallin mukaan etenevää päätöksentekoa, vaan tempoilevaa ja vaikeasti ennakoitavaa kamppailua eri preferenssejä edustavien toimijoiden välillä. Väitöskirjan ensimmäisessä artikkelissa analysoidaan säädösvalmistelua ja lainsäätämismenettelyä unionissa vaihe vaiheelta. Johtopäätöksenä todetaan, että unioniin on syntynyt yhteispäätösmenettelyn, sittemmin tavallisen lainsäätämisjärjestyksen myötä uudenlainen lainsäätämiskulttuuri, jolle on leimallista tiiviit yhteydet komission, Euroopan parlamentin ja neuvoston välillä. Toimielimet ottavat nykyisin joustavasti huomioon toistensa kantoja menettelyn edetessä, mikä mahdollistaa sen, että valtaosa EU-säädöksistä voidaan hyväksyä jo ensimmäisessä käsittelyssä. Toisessa tutkimusartikkelissa analysoidaan komission asemaa unionin toimielinrakenteessa. Artikkelissa tarkastellaan komission aloiteoikeutta sekä komission puheenjohtajan ja sen jäsenten valintamenettelyjä siitä näkökulmasta, edistääkö komissio todella unionin yleistä etua itsenäisenä ja riippumattomana, kuten EU-sopimuksen 17 artiklassa edellytetään. Tiettyjen järjestelyjen myötä Euroopan parlamentin ja komission suhde on kehittynyt siihen suuntaan, että komissio toimii jossain määrin parlamentille vastuunalaisena hallituksena. Artikkelissa kritisoidaan, että kehitys ei välttämättä lähennä kansalaisia unionin toimielimiin ja että kehitys omiaan vaarantamaan komission aseman verrattain riippumattomana välittäjänä trilogeissa. Kolmas artikkeli sisältää tapaustutkimuksen kuluttajille myönnettäviä luottoja sääntelevän direktiivin (2008/48/EY) valmisteluvaiheista. Tapaustutkimus konkretisoi Suomen hallituksen edustajien tekemän EU-vaikuttamisen keinoja, vahvuuksia ja kehittämiskohteita. Artikkelissa todetaan, että Suomelle aivan keskeinen vaikuttamisresurssi ovat sellaiset virkamiehet, jotka hallitsevat niin käsiteltävän säädöshankkeen sisältökysymykset kuin unionin päätöksentekomenettelyt ja toimielinten institutionalisoituneet käytännöt. Artikkelissa tehdyt empiiriset havainnot jäsenvaltioiden välillä käydyistä neuvotteluista tukevat konstruktiivisen mallin perusoletuksia. Neljännessä artikkelissa, joka on laadittu yhteistyönä professori Tapio Raunion kanssa, analysoidaan unioniasioiden kansallista valmistelua ja tarkemmin ottaen sitä, miten Suomen neuvottelukannat muotoutuvat valtioneuvoston yhteensovittamisjärjestelmän ylimmällä tasolla EU-ministerivaliokunnassa. Artikkelissa todetaan laajan pöytäkirja-aineiston ja sitä täydentävän haastatteluaineiston pohjalta, että EUministerivaliokunnan asialistan laadinta on delegoitu kokonaisuudessaan asiantuntijavirkamiehille. Lisäksi asialistan muotoutumiseen vaikuttaa luonnollisesti unionin toimielinten, erityisesti Eurooppa-neuvoston agenda. Toisaalta, EU-ministerivaliokunnan kokouksissa ministerit yksin tekevät päätöksiä ja linjaavat Suomen EU-politiikkaa. Viidennessä artikkelissa selvitetään, miten olisi toimittava, jos pyritään siihen, että uusi tai muutettu EU-säädös vastaisi mahdollisimman pitkälti Suomen kansallisesti määriteltyä neuvottelukantaa. Tehokkainta on vaikuttaa aloiteoikeutta lainsäädäntömenettelyssä käyttävään komissioon, tarvittaessa myös virkahierarkian ylimmillä tasoilla, sekä tehdä yhteistyötä muiden jäsenvaltioiden kanssa, erityisesti puheenjohtajavaltion, tulevien puheenjohtajavaltioiden ja suurten jäsenvaltioiden kanssa. Mikäli käsittelyssä oleva EU-säädöshanke arvioidaan kansallisesti erityisen tärkeiksi tai ongelmalliseksi, tulisi vaikuttamistoimia laajentaa kattamaan myös Euroopan parlamentin avainhenkilöitä. Kuudennessa artikkelissa analysoidaan suomalaisen kansalaisyhteiskunnan ja etujärjestöjen vaikutusmahdollisuuksia EU-asioiden valmistelussa. Johtopäätöksenä todetaan, että muodollinen yhteensovittaminen EU-valmistelujaostojen laajan kokoonpanon kokouksissa ei ole sidosryhmille ensisijainen eikä tehokkain vaikuttamisen keino. Sen sijaan korostuvat epäviralliset yhteydet toimivaltaisen ministeriön vastuuvirkamieheen kotimaassa ja vaikuttaminen eurooppalaisen kattojärjestön välityksellä. Väitöskirjan yhteenveto-osassa on eritelty, missä EU:n säädösvalmistelun ja lainsäätämismenettelyn vaiheissa Suomen kaltaisella pienellä jäsenvaltiolla on parhaat edellytykset vaikuttaa valmisteltavana olevaan säädökseen. Parhaat vaikutusmahdollisuudet ovat aivan EU-säädöksen elinkaaren alkuvaiheessa, kun komissio on vasta käynnistämässä uutta säädösvalmistelua. Väitöstutkimuksessa todetaan, että varhaista kannanmuodostusta ja sen mahdollistamaa ennakkovaikuttamista on Suomessa kyetty kehittämään etenkin niissä poliittisesti, taloudellisesti tai oikeudellisesti tärkeissä hankkeissa, joissa hallituksen kannanmuodostus tapahtuu EU-ministerivaliokunnassa. Muissa unionin säädöshankkeissa ennakollisen vaikuttamisen intensiteetti näyttäisi vaihtelevan, riippuen muun muassa toimivaltaisen ministeriön keskijohdon ja ylimmän johdon sitoutumisesta. Toinen Suomelle otollinen vaikuttamisen ajankohta on silloin, kun komission antamaa ehdotusta käsitellään asiantuntijavirkamiesten kesken neuvoston työryhmässä. Tehokas vaikuttaminen edellyttää, että Suomea neuvotteluissa edustavat henkilöt kokoavat ”samanmielisistä” jäsenvaltioista kaksoisenemmistösäännön mukaisen voittavan koalition. Viimeinen vaikuttamisen ikkuna aukeaa silloin, kun Coreper-komiteassa laaditaan neuvoston puheenjohtajalle neuvottelumandaattia toimielinten välisiin trilogeihin tavallisen lainsäätämisjärjestyksen ensimmäisessä käsittelyssä. Tässä varsin myöhäisessä menettelyvaiheessa vaikuttaminen on pienen jäsenvaltion näkökulmasta jo selvästi vaikeampaa. Väitöskirja sijoittuu luontevasti osaksi valtiotieteellistä eurooppalaistumis-kirjallisuutta siltä osin, kuin siinä on tutkittu EU-jäsenyyden vaikutuksia kotimaisiin hallinnon rakenteisiin ja politiikan asialistaan. Kuten tunnettua, Suomen EU-politiikka rakentuu eduskunnalle vastuullisen valtioneuvoston varaan. Väitöskirjassa ei kuitenkaan ole otettu erityiseen tarkasteluun perustuslakiin sidottua eduskunnan ja hallituksen yhteistoimintaa EU-asioissa. Sen sijaan on tutkittu unioniasioiden valmistelua ja yhteensovittamista valtioneuvoston sisällä. Kun EU-asioiden yhteensovittamisjärjestelmää luotiin, pidettiin tärkeänä, että jokaisessa säädöshankkeessa ja politiikkahankkeessa kyetään muodostamaan kansallisesti yksi ja yhtenäinen neuvottelupositio. Yhtenäisen kansallisen linjan ajamisen katsottiin parantavan Suomen asemaa unionin päätöksenteossa. Väitöskirjassa todetaan johtopäätöksenä, että EU-asioiden kansallinen valmistelujärjestelmä toteuttaa sille asetetut tavoitteet käytännössä varsin hyvin. Merkittävin kehittämiskohde liittyy kansallisen EU-valmistelun reaktiivisuuteen. Jos Suomi haluaa vaikuttaa yhä vahvemmin EU-lainsäätämiseen, Suomelle tärkeät hankkeet pitäisi tunnistaa jo varhaisessa vaiheessa ja priorisoida selkeästi niiden hoitamista ministeriöissä.

Accuracy of dose planning for prostate radiotherapy in the presence of metallic implants evaluated by electron spin resonance dosimetry

Radiotherapy is one of the main approaches to cure prostate cancer, and its success depends on the accuracy of dose planning. A complicating factor is the presence of a metallic prosthesis in the femur and pelvis, which is becoming more common in elderly populations. The goal of this work was to perform dose measurements to check the accuracy of radiotherapy treatment planning under these complicated conditions. To accomplish this, a scale phantom of an adult pelvic region was used with alanine dosimeters inserted in the prostate region. This phantom was irradiated according to the planned treatment under the following three conditions: with two metallic prostheses in the region of the femur head, with only one prosthesis, and without any prostheses. The combined relative standard uncertainty of dose measurement by electron spin resonance (ESR)/alanine was 5.05%, whereas the combined relative standard uncertainty of the applied dose was 3.35%, resulting in a combined relative standard uncertainty of the whole process of 6.06%. The ESR dosimetry indicated that there was no difference (P>0.05, ANOVA) in dosage between the planned dose and treatments. The results are in the range of the planned dose, within the combined relative uncertainty, demonstrating that the treatment-planning system compensates for the effects caused by the presence of femur and hip metal prostheses.

Defining Sales and Operations Planning Process in an Environmental Management Company

Sales and operations research publications have increased significantly in the last decades. The concept of sales and operations planning (S&OP) has gained increased recognition and has been put forward as the area within Supply Chain Management (SCM). Development of S&OP is based on the need for determining future actions, both for sales and operations, since off-shoring, outsourcing, complex supply chains and extended lead times make challenges for responding to changes in the marketplace when they occur. Order intake of the case company has grown rapidly during the last years. Along with the growth, new challenges considering data management and information flow have arisen due to increasing customer orders. To manage these challenges, case company has implemented S&OP process, though initial process is in early stage and due to this, the process is not managing the increased customer orders adequately. Thesis objective is to explore extensively the S&OP process content of the case company and give further recommendations. Objectives are categorized into six different groups, to clarify the purpose of this thesis. Qualitative research methods used are active participant observation, qualitative interviews, enquiry, education, and a workshop. It is notable that demand planning was felt as cumbersome, so it is typically the biggest challenge in S&OP process. More proactive the sales forecasting can be, more expanded the time horizon of operational planning will turn out. S&OP process is 60 percent change management, 30 percent process development and 10 percent technology. The change management and continuous improvement can sometimes be arduous and set as secondary. It is important that different people are required to improve the process and the process is constantly evaluated. As well as, process governance is substantially in a central role and it has to be managed consciously. Generally, S&OP process was seen important and all the stakeholders were committed to the process. Particular sections were experienced more important than others, depending on the stakeholders’ point of views. Recommendations to objective groups are evaluated by the achievable benefit and resource requirement. The urgent and easily implemented improvement recommendations should be executed firstly. Next steps are to develop more coherent process structure and refine cost awareness. Afterwards demand planning, supply planning, and reporting should be developed more profoundly. For last, information technology system should be implemented to support the process phases.

The house that the Court built. The retained powers case law of the European Court of Justice and the constitutional structure of the Union

Euroopan unionin perustamissopimusten katsotaan muodostavan EU:n valtiosäännön, jonka rajat ovat kuitenkin perustamissopimusten määräysten väljän muotoilun sekä Euroopan unionin tuomioistuimen tulkintakäytännön valossa epätarkat. Etenkin kysymys unionin ja sen jäsenvaltioiden välisestä toimivallanjaosta on EU-oikeudellisen tutkimuksen klassikoita. Tarkastelen pro gradu -tutkielmassani unionin valtiosääntörakennetta ja unionioikeuden kokonaisvaikutusta jäsenvaltioiden toimivaltojen käyttöön erityisesti EU-tuomioistuimen ratkaisukäytännössään kehittämän niin kutsutun retained powers -doktriinin valossa. Kyseisen opin mukaan EU-oikeus asettaa vaatimuksia jäsenvaltioiden toimivaltojen käytölle myös niillä aloilla, joilla sääntelytoimivalta on jäänyt jäsenvaltioille eikä sitä ole jaettu unionin kanssa. Aiheen teoreettisen tarkastelun pohjalta analysoin Euroopaun unionin tuomioistuimen ratkaisukäytäntöä erityisesti yhtä säilytetyn toimivallan alaa, koulutusta, koskevissa tapauksissa pyrkien havaitsemaan typologioita tuomioistuimen ratkaisutoiminnassa. Tutkimus noudattaa EU-valtiosääntöoikeuden metodologiaa. Keskeisenä lähdemateriaalina on siten käytetty unionituomioistuimen ratkaisukäytäntöä, joka heijastaa perustamissopimuksia tarkemmin unionin valtiosääntörakennetta. Oikeuskäytännön analyysi ja tulkinta on suoritettu peilaten sitä vasten unionin kehitystä markkinaorientoituneesta organisaatiosta yleismaailmalliseksi poliittiseksi unioniksi. Tutkielmani loppupäätelmä on, että jäsenvaltiot ovat tietyissä rajoissa hyväksyneet unionituomioistuimen kehittämän doktriinin, ja unionituomioistuin on siten saanut aikaan tosiasiallisen muutoksen EU:n valtiosääntörakenteessa. Retained powers -doktriini on omiaan syventämään eurooppalaista integraatiota ja nostaa kysymyksiä toimivallanjaon merkityksestä unionioikeudessa, perustamissopimusten kyvystä heijastaa unionin valtiosääntörakennetta sekä unionituomioistuimen toiminnan poliittisesta luonteesta.

Capital investments planning and life cycle simulations for the new valves manufacturing facility in Russia

The focus of the research is on the derivation of the valid and reliable performance results regarding establishment and launching of the new full-scale industrial facility, considering the overall current conditions for the project realization in and out of Russia. The study demonstrates the process of the new facility concept development, with following perfor-mance calculation, comparative analyzes conduction, life-cycle simulations, performance indicators derivation and project`s sustainability evaluation. To unite and process the entire input parameters complexity, regards the interlacing between the project`s internal technical and commercial sides on the one hand, and consider all the specifics of the Russian conditions for doing business on the other hand, was developed the unique model for the project`s performance calculation, simulations and results representation. The complete research incorporates all corresponding data to substantiate the assigned facility`s design, sizing and output capacity for high quality and cost efficient ferrous pipe-line accessories manufacturing, as well as, demonstrates that this project could be suc-cessfully realized in current conditions in Russia and highlights the room for significant performance and sustainability improvements based on the indexes of the derived KPIs.