A Fractional Calculus Perspective in the Evolutionary Design of Combinational Circuits

This paper analyses the performance of a genetic algorithm (GA) in the synthesis of digital circuits using two novel approaches. The first concept consists in improving the static fitness function by including a discontinuity evaluation. The measure of variability in the error of the Boolean table has similarities with the function continuity issue in classical calculus. The second concept extends the static fitness by introducing a fractional-order dynamical evaluation.

Expression of circulating leucocytes before, during and after myiasis by Dermatobia hominis in experimentally infected rats

Expression of circulating white blood cells was investigated in rats (Rattus norvegicus) experimentally infected with larvae of Dermatobia hominis, the human bot fly. Leucocytes were counted prior to infection (control group) as well as at 6, 10, 15, 20 and 28 days post-infection (dpi) and at 7, 15, 30 and 60 days post-larval emergence (dple). Total leucocyte numbers did not differ markedly among the groups. Significant differences were registered when values from control and animals harboring each larval stage of D. hominis were compared; with crescent rank: L1-, L2-, control and L3-infected groups. Leucocyte numbers were significantly higher in the control, 15, 20 or 28 dpi groups than in the 6 dpi animals. Higher counts were observed in control, L2- or L3-infected rats than L1-infected animals. Neutrophils, eosinophils and both large and small lymphocytes were also counted and analyzed. Basophils and monocytes were insufficient in number to permit statistical studies. These results stimulate the continuity of the studies about the host-parasite relationship in the dermatobiosis.

Using neural networks and support vector regression to relate marchetti dilatometer test parameters and maximum shear modulus

In the last two decades, small strain shear modulus became one of the most important geotechnical parameters to characterize soil stiffness. Finite element analysis have shown that in-situ stiffness of soils and rocks is much higher than what was previously thought and that stress-strain behaviour of these materials is non-linear in most cases with small strain levels, especially in the ground around retaining walls, foundations and tunnels, typically in the order of 10−2 to 10−4 of strain. Although the best approach to estimate shear modulus seems to be based in measuring seismic wave velocities, deriving the parameter through correlations with in-situ tests is usually considered very useful for design practice.The use of Neural Networks for modeling systems has been widespread, in particular within areas where the great amount of available data and the complexity of the systems keeps the problem very unfriendly to treat following traditional data analysis methodologies. In this work, the use of Neural Networks and Support Vector Regression is proposed to estimate small strain shear modulus for sedimentary soils from the basic or intermediate parameters derived from Marchetti Dilatometer Test. The results are discussed and compared with some of the most common available methodologies for this evaluation.

Using neural networks and support vector regression to relate marchetti dilatometer test parameters and maximum shear modulus

In the last two decades, small strain shear modulus became one of the most important geotechnical parameters to characterize soil stiffness. Finite element analysis have shown that in-situ stiffness of soils and rocks is much higher than what was previously thought and that stress-strain behaviour of these materials is non-linear in most cases with small strain levels, especially in the ground around retaining walls, foundations and tunnels, typically in the order of 10−2 to 10−4 of strain. Although the best approach to estimate shear modulus seems to be based in measuring seismic wave velocities, deriving the parameter through correlations with in-situ tests is usually considered very useful for design practice.The use of Neural Networks for modeling systems has been widespread, in particular within areas where the great amount of available data and the complexity of the systems keeps the problem very unfriendly to treat following traditional data analysis methodologies. In this work, the use of Neural Networks and Support Vector Regression is proposed to estimate small strain shear modulus for sedimentary soils from the basic or intermediate parameters derived from Marchetti Dilatometer Test. The results are discussed and compared with some of the most common available methodologies for this evaluation.

Pathology of complete atrioventricular block in chronic chagas' myocarditis

Sclero-atrophy, fibrosis, vascular ectasia, phlebosclerosis and mild non-specific chronic inflammatory changes were observed in variable location and proportion involving the atrioventricular conducting tissue of the heart in five human cases of chronic Chagas' myocarditis associated with complete atrioventricular block. One case presented complete destruction of the A-V conduction system. In three cases the lesions were disseminated all along the conducting tissue but did not cause anywhere a complete disruption in the continuity of the system. The distal portion of the bundle branches were the most damaged sector of the system, exceptfor the fasciculi of the posterior division of the left bundle branch which were relatively preserved. One case exhibited bilateral sclero-atrophy of the bundle branches as the main change; and another showed early and mild fibrocalcific damage of the penetrating portion of the His bundle. The A-V node appeared as the least involved part of the conducting system in the cases studied. Demonstration of the lesions in this series of cases seems important because: a) it reveals that complete atrioventriculr block in chronic Chagas' disease results from disseminated lesions and not from focal disruptive change as has been commonly observed in cases of other etiologies; b) it shows that chronic inflammation can produce at the end variable and widespread vascular, degenerative andfibrotic alterations within the conducting tissue of the heart, which may lead to its total destruction.

Development of ion jelly thin films for electrochemical devices

Dissertação para obtenção do Grau de Doutor em Química Sustentável

Mechanical characterization of aortas using 2D ultrasound elastography

Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.

Nanostructuring silicon probes via electrodeposition: characterization of electrode coatings for acute in vivo neural recordings

Understanding how the brain works will require tools capable of measuring neuron elec-trical activity at a network scale. However, considerable progress is still necessary to reliably increase the number of neurons that are recorded and identified simultaneously with existing mi-croelectrode arrays. This project aims to evaluate how different materials can modify the effi-ciency of signal transfer from the neural tissue to the electrode. Therefore, various coating materials (gold, PEDOT, tungsten oxide and carbon nano-tubes) are characterized in terms of their underlying electrochemical processes and recording ef-ficacy. Iridium electrodes (177-706 μm2) are coated using galvanostatic deposition under different charge densities. By performing electrochemical impedance spectroscopy in phosphate buffered saline it is determined that the impedance modulus at 1 kHz depends on the coating material and decreased up to a maximum of two orders of magnitude for PEDOT (from 1 MΩ to 25 kΩ). The electrodes are furthermore characterized by cyclic voltammetry showing that charge storage capacity is im-proved by one order of magnitude reaching a maximum of 84.1 mC/cm2 for the PEDOT: gold nanoparticles composite (38 times the capacity of the pristine). Neural recording of spontaneous activity within the cortex was performed in anesthetized rodents to evaluate electrode coating performance.

Business continuity management at Banif: Defining and selecting recovery strategies

This project aims to delineate recovery strategies for a Portuguese Bank, as a way to increase its preparedness towards unexpected disruptive events, thus avoiding an operational crisis escalation. For this purpose, Business Continuity material was studied, a risk assessment performed, a business impact analysis executed and new strategic framework for selecting strategies adopted. In the end, a set of recovery strategies were chosen that better represented the Bank’s appetite for risk, and recommendations given for future improvements.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Implementation progress of mental health services in Rwanda: Bugesera district case

RESUMO: O Ministério da Saúde do Governo do Ruanda identifica a saúde mental como uma área de prioridade estratégica para a intervenção em resposta à alta carga dos transtornos mentais no Ruanda. Ao longo dos últimos 20 anos após o genocídio, o sector público reconstruiu sua Resposta Nacional de Saúde Mental com base no acesso equitativo aos cuidados, através do desenvolvimento de uma Política Nacional de Saúde Mental e novas estruturas de saúde mental. A política de Saúde Mental do Ruanda, revista em 2010, prima pela descentralização e integração dos serviços de saúde mental em todas as estruturas nacionais do sistema de saúde e ao nível da comunidade. O presente estudo de caso tem como objetivo avaliar a situação do sistema de saúde mental de um distrito típico de uma área rural no Ruanda, e sugerir melhorias, incluindo algumas estratégias para monitoras as mudanças. Os resultados do estudo permitirão ao Ruanda reforçar a sua capacidade para implementar o Plano Nacional de Saúde Mental ao nível dos distritos. O relatório também será útil para monitorar o progresso da implementação de serviços de saúde mental nos distritos, incluindo a prestação de serviços de base comunitária e a participação dos usuários, suas famílias e outros interessados na promoção, prevenção, assistência e reabilitação em saúde mental. Este estudo também procurou avaliar o progresso da implementação dos cuidados de saúde mental a nível descentralizado, com vista a compreender as implicações em termos de recursos desses processos. Foi realizada uma análise situacional num local do distrito, baseado em entrevistas com as principais partes interessadas responsáveis, usando o Instrumento de Avaliação de Sistemas de Saúde Mental da Organização Mundial da Saúde (WHO-AIMS). Os resultados sugerem que os recursos humanos para a saúde mental e serviços de base comunitária de saúde mental no distrito continuam a ser extremamente limitados. Os profissionais de saúde mental são adicionalmente limitados na sua capacidade para oferecer intervenções de emergência a pacientes psiquiátricos e garantir a continuidade do tratamento farmacológico a pacientes com condições crônicas. Para planejar efetivamente, de acordo com as necessidades da comunidade, sugerimos que o sistema de saúde mental deve envolver também os representantes das famílias e dos usuários no processo de planificação de modo a melhorar a sua contribuição no processo de implementação das atividades de saúde mental. Este estudo de caso do Distrito de Bugesera oferece a primeira análise de nível distrital dos serviços de saúde mental no Ruanda, e pode servir como uma mais-valia para a melhoria do sistema de saúde mental, incluindo a advocacia para a melhoria da qualidade dos cuidados de saúde mental a este nível, aumentando o financiamento para a implementação de serviços clínicos de saúde mental e os recursos humanos disponíveis para a prestação de cuidados de saúde mental, principalmente a nível dos cuidados primários.--------------------- ABSTRACT: To deal with the high burden of mental health disorders resulting from consequences of the 1994 genocide against Tutsis, the Rwanda Ministry of Health (MoH) considers mental health as a priority intervention. For the last 20 years, Ministry of Health focused on rebuilding a national and equity-oriented mental health program responding to the population needs in mental health. Mental health services are now decentralized and integrated in the national health system, from the community level up to the referral level. This study assessed the situation of mental health services in one rural district in Rwanda. It was aimed at assessing the progress of implementation of mental health care at the decentralized level, focusing on resource implications and processes. This study is based on interviews conducted with key stakeholders, using the World Health Organization's Assessment Instrument for Mental Health Systems (WHO-AIMS). Findings show that human resources for mental health care and community-based mental health services of the assessed district remain extremely limited. Mental health professionals face limitation regarding the ability to provide emergency management of psychiatric patients and to ensure continuity of psychopharmacological treatment of patients with chronic conditions. To improve the implementation process of mental health interventions and activities, a planning process based on community needs and the involvement of representatives of families and users in planning process should be considered. The Bugesera case study on the situation of mental health services can serve as a baseline for improvement of the mental health program in Rwanda, in terms of quality care services, infrastructure and equipment, human and financial resources.

Pelvic lymphoscintigraphy: contribution to the preoperative staging of rectal cancer

PURPOSE: Preservation of the anal sphincter in surgery for cancer of the distal rectum in an attempt to avoid colostomy has been a main concern of colorectal surgeons. Various proposed procedures contradict oncological principles, especially with respect to pelvic lymphadenectomy. Therefore, prior knowledge of pelvic lymph node involvement is an important factor in choosing the operative technique, i.e., radical or conservative resection. Introduction of ultrasound, computerized tomography, and magnetic resonance have made preoperative study of the area possible. Nevertheless, these resources offer information of an anatomical nature only. Lymphoscintigraphy enables the morphological and functional evaluation of the pelvic area and contributes toward complementing the data obtained with the other imaging techniques. The objective of this prospective study is twofold: to standardize the lymphoscintigraphy technique and to use it to differentiate patients with rectal cancer from those with other coloproctologic diseases. CASUISTIC AND METHODS: Sixty patients with various coloproctologic diseases were studied prospectively. Ages ranged from 21 to 96 years (average, 51 and median, 55 years). Twenty-six patients were male and 34 were female. Thirty patients had carcinoma of the distal rectum as diagnosed by proctologic and anatomic-pathologic examinations, 20 patients had hemorrhoids, 5 had chagasic megacolon, 2 had diverticular disease, 2 had neoplasm of the right colon, and 1 had ulcerative colitis as diagnosed by proctologic exam and/or enema. The lymphoscintigraphy method consisted of injecting 0.25 mL of a dextran solution marked with radioactive technetium-99m into the right and left sides of the perianal region and obtaining images with a gamma camera. The results were analyzed statistically with a confidence level of 95% (P < .05) using the following statistical techniques: arithmetic and medium average, Fisher exact test, chi-square test corrected for continuity according to Yates, and distribution tables for the number of patients. RESULTS: In rectal cancer, the tracer progresses unilaterally or is absent; in other patients, the progress of the tracer is bilateral and symmetrical, although its progress may be slow. Statistical tests showed with high significance that the agreement index between the clinical diagnosis and the result of the lymphoscintigraphic exam was 93%. CONCLUSIONS: Lymphoscintigraphy is a standardized, painless, and harmless test that can be performed in all cases; it differentiates patients with rectal cancer from those with other coloproctological diseases.

Continuous monitoring of concrete mechanical properties since an early age to support construction phasing

The assessment of concrete mechanical properties during construction of concrete structures is of paramount importance for many intrinsic operations. However many of the available non-destructive methods for mechanical properties have limitations for use in construction sites. One of such methodologies is EMM-ARM, which is a variant of classic resonant frequency methods. This paper aims to demonstrate the efforts towards in-situ applicability of EMMARM, as to provide real-time information about concrete mechanical properties such as E-modulus and compressive strength. To achieve the aforementioned objective, a set of adaptations to the method have been successfully implemented and tested: (i) the reduction of the beam span; (ii) the use of a different mould material and (iii) a new support system for the beams. Based on these adaptations, a reusable mould was designed to enable easier systematic use of EMMARM. A pilot test was successfully performed under in-situ conditions during a bridge construction.

Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates

The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity performance. A direct consequence of this treatment is an increase in the hot-mix asphalt resilient modulus. The aim of this paper is to analyse the effect of ageing on the stiffness of asphalt mixtures with different amounts of recycled concrete aggregates, before and after a heat treatment, which was analysed through the assessment of its bitumen properties. Moreover, this paper also aims to analyse whether the rolling thin-film oven test is able to simulate the ageing effect of the heat treatment. In the laboratory work, a paving grade bitumen B50/70 has been used to produce asphalt mixtures with 0% and 30% recycled concrete aggregates, and the bitumen was later characterised (using penetration, softening point, dynamic viscosity and dynamic shear rheometer tests) in various situations, such as when using virgin bitumen, short-term aged bitumen, aged bitumen after heat treatment (simulated with 4 h of rolling thin-film oven test) and bitumen samples recovered from asphalt mixtures with different production mixes (0% and 30% recycled concrete aggregate) and heat treatment conditions (0 and 4 h of curing time in the oven). Based on the results obtained, it could be concluded that the ageing resulting from the heat treatment is the primary cause of the hot-mix asphalt's increased stiffness, while recycled concrete aggregate content has a small influence. Moreover, it could be concluded that when there is no curing time, the recycled concrete aggregate protects the bitumen against ageing. Additionally, it could be stated that the rolling thin-film test is able to adequately simulate the ageing effect of the heat treatment. Thus, this test is useful for determining the ageing suffered by the bitumen when the recycled concrete aggregate mixture is manufactured using a heat treatment.

Transfer zone of prestressed CFRP reinforcement applied according to NSM technique for strengthening of RC structures

This study presents an experimental program to assess the tensile strain distribution along prestressed carbon fiber reinforced polymer (CFRP) reinforcement flexurally applied on the tensile surface of RC beams according to near surface mounted (NSM) technique. Moreover, the current study aims to propose an analytical formulation, with a design framework, for the prediction of distribution of CFRP tensile strain and bond shear stress and, additionally, the prestress transfer length. After demonstration the good predictive performance of the proposed analytical approach, parametric studies were carried out to analytically evaluate the influence of the main material properties, and CFRP and groove cross section on the distribution of the CFRP tensile strain and bond shear stress, and on the prestress transfer length. The proposed analytical approach can also predict the evolution of the prestress transfer length during the curing time of the adhesive by considering the variation of its elasticity modulus during this period.