Análise do ciclo de vida da produção do butanol

Este trabalho teve como objetivo avaliar e comparar os impactes ambientais da produção do butanol considerando três processos produtivos: um que usa fontes fósseis e dois que usam fontes renováveis, nomeadamente palha de trigo e milho. Para o primeiro caso considerouse o processo oxo e os restantes usaram o processo de produção ABE (acetona, butanol e etanol). Na primeira etapa estudaram-se e descreveram-se os diferentes processos referidos. A análise do ciclo de vida foi depois aplicada efetuando as quatro fases nomeadamente definição do âmbito e objetivo, inventário, avaliação de impactes e interpretação dos resultados obtidos. O inventário foi efetuado tendo em conta a bibliografia existente sobre estes processos e com o auxílio da base de dados Ecoinvent Versão3 Database™. Na avaliação de impactes utilizou-se o método Impact 2002 + (Endpoint). Concluiu-se que a produção do butanol pelo processo ABE utilizando o milho é a que apresenta maior impacte ambiental e a que produção do butanol pelo processo ABE usando a palha de trigo é a que apresenta um menor impacte ambiental, quando o processo de alocação foi efetuado tendo em conta as massas de todos os produtos produzidos em cada processo. Foi efetuada uma análise de sensibilidade para a produção de butanol usando palha de trigo e milho relativa aos dados de menor qualidade. No processo da palha de trigo fez-se variar a quantidade de material enviado para a digestão anaeróbia e a quantidade de efluente produzida. No processo relativo ao milho apenas se fez variar a quantidade de efluente produzida. As variações tiveram um efeito pouco significativo (<1,3%) no impacte global. Por fim, efetuou-se o cálculo dos impactes considerando uma alocação económica que foi executada tendo em conta os preços de venda para o ano 2013 na Europa, para os produtos produzidos pelos diferentes processos. Considerando o valor económico verificou-se um aumento do peso relativo ao butanol, o que fez aumentar significativamente o impacte ambiental. Isto deve-se em grande parte ao baixo valor económico dos gases formados nos processos de fermentação. Se na alocação por massa for retirada a massa destes gases os resultados obtidos são similares nos dois tipos de alocação.

Optimização do processo de devolução de medicamentos fora do prazo de validade

RESUMO - Durante todo o seu ciclo de vida, o medicamento está sujeito a padrões de qualidade, segurança e eficácia, alicerçados numa atuação conjunta dos responsáveis pela sua colocação no mercado, das autoridades competentes nacionais e comunitárias. Os diferentes intervenientes estão sujeitos a um conjunto de obrigações e procedimentos que englobam também a sua fase final de retirada do mercado, devolução, recolha e valorização ou reciclagem. Neste trabalho é caracterizada a cadeia de distribuição do medicamento assim como o seu fluxo físico no sentido inverso, ou seja, o processo de devolução e de tratamento ambientalmente adequado para os resíduos de medicamentos. A maioria da literatura a respeito das devoluções de medicamentos enfatiza a vertente ecológica do sistema de logística inversa. Neste trabalho, as questões ambientais são discutidas , mas o objectivo primário focaliza questões económicas relacionadas com o processo de devoluções. São apresentadas as possíveis vantagens teóricas da criação de um sistema centralizado de gestão de devoluções, por oposição ao atual sistema de circuitos dispersos. Com a aplicação de um inquérito a armazenistas com larga responsabilidade no processo de devoluções, pretendeu-se avaliar os custos inerentes ao atual modelo. Os resultados obtidos indicam que existe margem potencial para reduzir custos neste processo, para a grande maioria dos armazenistas. Na área específica dos medicamentos fora de prazo de validade, o crescente desenvolvimento e aperfeiçoamento dos processos de devolução poderá direcionar-se no sentido da criação de centrais de devolução centralizadas.

The implementation of an Enterprise Geographical Information System to support Cadastre and Expropriation activities.

The processes of mobilization of land for infrastructures of public and private domain are developed according to proper legal frameworks and systematically confronted with the impoverished national situation as regards the cadastral identification and regularization, which leads to big inefficiencies, sometimes with very negative impact to the overall effectiveness. This project report describes Ferbritas Cadastre Information System (FBSIC) project and tools, which in conjunction with other applications, allow managing the entire life-cycle of Land Acquisition and Cadastre, including support to field activities with the integration of information collected in the field, the development of multi-criteria analysis information, monitoring all information in the exploration stage, and the automated generation of outputs. The benefits are evident at the level of operational efficiency, including tools that enable process integration and standardization of procedures, facilitate analysis and quality control and maximize performance in the acquisition, maintenance and management of registration information and expropriation (expropriation projects). Therefore, the implemented system achieves levels of robustness, comprehensiveness, openness, scalability and reliability suitable for a structural platform. The resultant solution, FBSIC, is a fit-for-purpose cadastre information system rooted in the field of railway infrastructures. FBSIC integrating nature of allows: to accomplish present needs and scale to meet future services; to collect, maintain, manage and share all information in one common platform, and transform it into knowledge; to relate with other platforms; to increase accuracy and productivity of business processes related with land property management.

Primera Reservoir Ltd. strategic position analysis

The purpose of this work is to understand the internal and external structure in which the company operates to provide an idea of the strategic actions needed to accomplish their organizational objectives. A strategic software was employed to build up phase one and phase two, phase one involved analysing internal and external factors that influence the company, comprehending their core competences, factors that influence the market and identification of strengths and weaknesses. Phase two consisted on providing an idea of their real competitive position and the suggestion of a development strategy, given the possible limitations in the external factors, the company should carefully analyse some of the opportunities present in the industry overseas to continue to develop their business and increase its profitability. Furthermore, a source of competitive advantage was found in their outbound logistics which could serve a differentiator between their competitors.

Assessing initial embodied energy in building structures using LCA methodology

The considerable amount of energy consumed on Earth is a major cause for not achieving sustainable development. Buildings are responsible for the highest worldwide energy consumption, nearly 40%. Strong efforts have been made in what concerns the reduction of buildings operational energy (heating, hot water, ventilation, electricity), since operational energy is so far the highest energy component in a building life cycle. However, as operational energy is being reduced the embodied energy increases. One of the building elements responsible for higher embodied energy consumption is the building structural system. Therefore, the present work is going to study part of embodied energy (initial embodied energy) in building structures using a life cycle assessment methodology, in order to contribute for a greater understanding of embodied energy in buildings structural systems. Initial embodied energy is estimated for a building structure by varying the span and the structural material type. The results are analysed and compared for different stages, and some conclusions are drawn. At the end of this work it was possible to conclude that the building span does not have considerable influence in embodied energy consumption of building structures. However, the structural material type has influence in the overall energetic performance. In fact, with this research it was possible that building structure that requires more initial embodied energy is the steel structure; then the glued laminated timber structure; and finally the concrete structure.

Technological evolution

The evolution of a technology and the understanding of the moment in its life cycle is of the utmost importance to the entry strategy devised by any company. Having the entry of EDP Brazil on the micro-generation market as background, the present workproject attempts to summarize the most important topics in management literature concerning the theory of technology life-cycles and the updated literature on developments of photovoltaic technology to infer the current positioning of this technology in the theoretical models. The need for this type of work stems from the very common lack of bridging between the academic research of economic aspects relevant to the evolution of technologies and the agents of research on specific technological issues. When this occurs, namely due to the external nature of research to companies, thereby escaping the harsh economic controls of a profit seeking enterprise, the evolution many times lacks the appropriate framework to be studied on a more forward looking manner and to allow for management decisions to be based on.

Contributos para um Plano de Preservação no Arquivo Intermédio da Câmara Municipal de Sintra

Os aquivos municipais preservam a documentação definida legalmente como de conservação permanente, a memória e a experiência da Administração Local e, como tal, são agentes imprescindíveis à preservação dos direitos municipais. A preocupação com a preservação da documentação deve constituir um dos pilares principais do arquivo desde o início da sua criação. E não somente quando a documentação é transferida para o Arquivo Histórico, deve estar presente durante todo o ciclo de vida da documentação. Com a criação do PARAM (Programa de Apoio à Rede de Arquivos Municipais), os arquivos municipais ganham um novo incremento, não só a nível técnico como a nível financeiro, sendo-lhe reconhecido o seu devido valor e importância, na sua dupla dimensão, administrativa e cultural. Uma das funções do arquivo é disponibilizar a documentação que têm à sua guarda e que se encontra armazenada nos depósitos. Para tal é fundamental criar condições a curto, a médio e a longo prazo, implementando toda uma política integrada de preservação, envolvendo os demais serviços da instituição, fazendo-se o controlo do estado de conservação da documentação, aplicando uma metodologia da manipulação de documentos para disponibilizá-los tanto aos clientes internos como externos. O Arquivo Intermédio da Câmara Municipal de Sintra não possui plano de preservação documental, nem ações de preservação extensíveis aos objetos digitais, daí que a presente tese de mestrado pretenda ser um proposta de um contributo de um plano de preservação, que tenha em consideração os demais aspetos desde a localização e construção ou manutenção do edifício onde se encontra o arquivo, questões de segurança, de controlo ambiental, de luz/fotodegradação, o controlo integrado de pragas, danos causados por água, os desastres naturais, a poluição, a limpeza e vigilância na zona de depósitos e armazenamento e manuseamento dos documentos.

Genome of an arbuscular mycorrhizal fungus provides insight into the oldest plant symbiosis.

The mutualistic symbiosis involving Glomeromycota, a distinctive phylum of early diverging Fungi, is widely hypothesized to have promoted the evolution of land plants during the middle Paleozoic. These arbuscular mycorrhizal fungi (AMF) perform vital functions in the phosphorus cycle that are fundamental to sustainable crop plant productivity. The unusual biological features of AMF have long fascinated evolutionary biologists. The coenocytic hyphae host a community of hundreds of nuclei and reproduce clonally through large multinucleated spores. It has been suggested that the AMF maintain a stable assemblage of several different genomes during the life cycle, but this genomic organization has been questioned. Here we introduce the 153-Mb haploid genome of Rhizophagus irregularis and its repertoire of 28,232 genes. The observed low level of genome polymorphism (0.43 SNP per kb) is not consistent with the occurrence of multiple, highly diverged genomes. The expansion of mating-related genes suggests the existence of cryptic sex-related processes. A comparison of gene categories confirms that R. irregularis is close to the Mucoromycotina. The AMF obligate biotrophy is not explained by genome erosion or any related loss of metabolic complexity in central metabolism, but is marked by a lack of genes encoding plant cell wall-degrading enzymes and of genes involved in toxin and thiamine synthesis. A battery of mycorrhiza-induced secreted proteins is expressed in symbiotic tissues. The present comprehensive repertoire of R. irregularis genes provides a basis for future research on symbiosis-related mechanisms in Glomeromycota.

Multiple paternity and its consequences in the white campion " Silene latifolia "

Summary Several studies have demonstrated that the number of pollen donors siring seeds of individual fruits is frequently greater than one and, consequently, that plants have multiple mates. Multiple paternity can have important consequences at the population level. It influences the genetic variability of a population, the reproductive success of males and the fitness of females and future generations. It also influences male-male interactions for fertilization and it is fundamental in providing opportunity of female choice. I investigated the occurrence and the importance of multiple paternity within fruits in natural populations of the dioecious Silene latifolia using microsatellite DNA markers, especially developed for this study. I found that multiple paternity occurs in all populations investigated in the European range of the species, varying from one to nine sires per fruit with a mean of three, suggesting that multiple paternity is highly prevalent in natural populations. In the presence of multiple paternity I investigated if there was a female genotype influence on siring success of the males. I used the same pollen mixture from two males and applied it to three replicate females of different relatedness (two full sisters and one unrelated). I found female genotype influence in one of the two populations investigated, which might reflect different population history. Since these results suggested some degree of female choice, we investigated whether the occurrence of multiple paternity and post-pollination selection could provide opportunity for inbreeding avoidance. First, I measured inbreeding depression at different life-cycle stages for offspring obtained by single-donor crosses with brothers or unrelated males replicated on distinct flowers on the same female plant. To address inbreeding avoidance, I determined paternity in crosses using mixed pollen loads of the two males. I found significant inbreeding depression in the studied population, even under benign experimental conditions, and although the unrelated male did not sire significantly more offspring, there was an effect of genetic dissimilarity on paternity. This suggests that paternity is affected by relatedness among mates, but maybe additionally affected by other factors such as pollen competitive ability or male-female interactions. Using inbred and outbred crosses, I further investigated sex ratio bias inheritance in this species, and found that sex ratio bias of the parental generation was significantly correlated to pollen germination success of the F2 generation, which suggests that sex ratio bias in this species results from the specific X/Y combination and not only on Y performance. An effect of X and Y is consistent with sex chromosome meiotic drive. In conclusion, I found multiple paternity to be widespread in the study species and that females of similar genotype produce similar paternity shares. I found that inbreeding depression is substantial, therefore receiving pollen from several donors might lead to fewer inbred offspring, I also found an effect of genetic dissimilarity on paternity shares, which indicates that there is some ability to discriminate against related pollen, although this seems not to be the only determinant of paternity outcome. Finally I found sex ratio bias to be dependent on both X and Y chromosomes as predicted by sex chromosome meiotic drive. Résumé Plusieurs études ont démontré qu'il n'était pas rare que les graines contenues dans un même fruit soient issues de la fécondation par plusieurs pollens provenant de mâles différents, ce qui sous-entend que les plantes peuvent avoir plusieurs partenaires sexuels. La paternité multiple peut avoir d'importantes conséquences au niveau populationnel dans la mesure où elle peut influencer le degré de variabilité génétique de la population, le succès reproducteur des mâles, la fitness des femelles et des futures générations. La paternité multiple peut également avoir un impact sur les interactions mâle-mâle lors de la fertilisation et peut être considérée comme fondamentale vis-à-vis de la femelle, qui y trouve alors une opportunité de choisir son ou ses partenaires. Dans le cadre de ce travail de thèse j'ai cherché à déterminer si la paternité multiple était un phénomène observable et important dans les populations naturelles de l'espèce dioïque, Silene latifolia. Pour ce faire, j'ai utilisé des marqueurs microsatellites, spécialement développés pour cette étude. J'ai observé des phénomènes de paternité multiple dans toutes les populations de l'étude, réparties dans l'aire de distribution européenne de l'espèce. Le nombre de pères par fruit varie de un à neuf, avec un nombre moyen de trois, ce qui signifie que la paternité multiple est très répandue dans les populations naturelles. En raison de ces résultats, je me suis demandée si le génotype de la femelle influence le succès de paternité des mâles. J'ai alors réalisé des pollinisations manuelles sur la base d'un mélange de pollens issus de deux mâles, que j'ai appliqué sur trois femelles (réplicats) présentant différents degrés d'apparentement (deux soeurs. et une femelle étrangère). Il ressort de cette expérience que le génotype de la femelle peut influencer la paternité dans l'une des deux populations étudiées, ce qui pourrait refléter des différences en terme d'histoire des populations. Dans la mesure où ces résultats suggèrent un certain degré de choix chez la femelle, j'ai cherché à savoir si la paternité multiple et la sélection post-pollinisation pouvaient être des moyens d'éviter les croisements consanguins. Dans un premier temps, j'ai évalué la dépression de consanguinité à différentes étapes du cycle de vie chez des descendants issus de croisements à un seul donneur, celui-ci étant alternativement un frère ou un étranger, répliqués sur plusieurs fleurs d'une même plante femelle. Afin d'estimer l'évitement de croisements consanguins, j'ai effectué des croisements dont le pollen était un mélange des deux mâles (frère et étranger), puis j'ai déterminé la paternité dans les fruits obtenus. J'ai pu mettre en évidence un effet de dépression de consanguinité- significatif dans les populations étudiées, même dans des conditions expérimentales moins rudes qu'à l'extérieur. Bien que le mâle étranger n'ait pas engendré un nombre significativement plus important de graines, il y avait un effet de dissimilarité génétique sur la paternité. Ceci suggère que la paternité est affectée par le degré d'apparentement entre les partenaires, mais qu'elle peut aussi être affectée par d'autres facteurs tels que la compétitivité du pollen ou encore par les interactions mâles-femelles. L'utilisation de croisements consanguins et hybrides m'a également permis d'étudier l'héritabilité du biais de sex ratio chez cette espèce. Il s'est avéré que le biais de sex ratio de la génération parentale était significativement corrélé au succès de germination du pollen de la génération F2, ce qui signifie que, chez cette espèce, le biais de sex ratio résulte d'une combinaison spécifique de X/Y et non uniquement de la performance de Y. Un effet de X et Y est compatible avec l'hypothèse de distorsion de ségrégation méiotique des chromosomes sexuels. En conclusion, il ressort de mes résultats que la paternité multiple est un phénomène largement répandu chez S. latifolia et la paternité accomplie par un mâle est plus similaire entre soeurs qu'avec une femelle étrangère J'ai également mis en évidence que la dépression de consanguinité a un impact considérable; aussi, recevoir du pollen de plusieurs donneurs différents pourrait permettre à la femelle de produire moins de descendants consanguins. J'ai aussi trouvé un effet de la dissimilarité génétique sur le partage de paternité, ce qui indique que la discrimination contre le pollen d'apparentés est possible, bien que cela ne semble pas être le seul facteur déterminant dans le résultat de la paternité. Enfin, j'ai trouvé que le biais de sex ratio est dépendant des deux chromosomes X et Y, conformément à la théorie de distorsion de ségrégation méiotique des chromosomes sexuels.

Developing sustainable value proposition: A case study from manufacturing industry

Increasing pressures to reduce costs, inprove productivity, and lower the environmental impact are forcing suppliers to present evidences of the monetary and societal value they create for the customers and society around. The extant academic literature on the practical activities related to topic is still sparse and this study addresses the gap by developing sustainable customer value proposition for Valmet’s recycled fibre line solution for the Chinese market. The research is based on literature review and single case study method. Theoretically the study is connected to the emerging literature of customer value and life cycle engineering, and to the research of sustainable development in the field of marketing. For exloiting empirical evidences, in-depth supplier interviews and customer survey were conducted. The results suggest that selling of recycled fibre line solution requires tangible and credible evidence of the value and utility which is delivered for the customer. In addition to the economic benefits also societal benefits should be included in the value proposition that are the focus of attention in China. Still, the role of discovered benefits may be contradictory until they are communicated to appropriate decision makers. Managerially the study contributes to the customer value management and quantification knowledge and practices in Valmet’s organization.

Project Controlling and Management in IT Consulting Enterprise

Liiketoiminnan organisoiminen projekteiksi on erittäin yleistä nykyisin. Suuri osa projekteista erityisesti IT-alalla epäonnistuu kuitenkin saavuttamaan tavoitteensa. Projektin menestys on tyypillisesti mitattu budjetin, aikataulun, laadun ja sidosryhmien tyytyväisyyden perusteella. Tämän Pro Gradu -tutkielman tarkoituksena on etsiä tyypillisimpiä syitä projektien epäonnistumiseen ja löytää projektien seurannan ja mittaamisen avulla keinoja näiden epäonnistumisten ehkäisemiseen. Tutkimusmenetelmänä on laadullinen tapaustutkimus. Empiirinen aineisto on kerätty haastattelujen, eri materiaalien analysoinnin ja havainnoinnin avulla. Teoriaosuus tarjoaa kattavan yhteenvedon projektiliiketoiminnan ja yksittäisten projektien johtamiseen sekä projektien seurantaan ja mittaamiseen aikaisemman kirjallisuuden perusteella. Empiirisessä osiossa suoritetaan analyysi Case -yrityksen projektien seurantaan ja valittuihin projekteihin. Analyysien, haastattelujen ja havainnoinnin pohjalta tehdään johtopäätökset tyypillisimmistä, ongelmia projekteissa aiheuttavista tekijöistä sekä näiden esiintymisestä projektin elinkaaren eri vaiheissa. Mahdolliset ongelmia ehkäisevät keinot esitetään myös. Ehdotuksia kehityskohteiksi esitetään lopuksi teorian ja empirian pohjalta.

Analysis of the feeding behaviour of the mosquito Culex pipiens L. (Diptera: Culicidae) in relation to West Nile virus

The goal ofthis literature review is to inform the reader on several aspects of West Nile Virus (WNV) transmission by its mosquito vector, Culex pipiens and to elucidate how Cx. pipiens and WNV are intertwined. The first few sections of the literature review describe the life cycle and blood feeding behaviours ofmosquitoes so that baseline data ofmosquito biology are established. In addition to explaining how and why a mosquito blood feeds, the section on "Blood Meal Analysis" describes the different methods for determining the vertebrate source of mosquito blood meals and a brief history of these testing methods. Since this thesis looks at the feeding behaviour of Cx. pipiens, it is important to know how to determine what they are feeding upon. Discussion on other mosquito-borne diseases related to WNV gives a broader perspective to the thesis, and examines other diseases that have occurred in Ontario in the past. This is followed by background information on WNV and theories on how this virus came to North America and how it relates to Cx. pipiens. The final sections discuss Cx. pipiens and give background information to how this species of mosquito exists and behaves within North America.

Trading nitrogen for carbon: Nitrogen and carbon translocation in a plant/fungal (Metarhizium spp.) symbiosis

While nitrogen is critical for all plants, they are unable to utilize organically bound nitrogen in soils. Therefore, the majority of plants obtain useable nitrogen through nitrogen fixing bacteria and the microbial decomposition of organic matter. In the majority of cases, symbiotic microorganisms directly furnish plant roots with inorganic forms of nitrogen. More than 80% of all land plants form intimate symbiotic relationships with root colonizing fungi. These common plant/fungal interactions have been defined largely through nutrient exchange, where the plant receives limiting soil nutrients, such as nitrogen, in exchange for plant derived carbon. Fungal endophytes are common plant colonizers. A number of these fungal species have a dual life cycle, meaning that they are not solely plant colonizers, but also saprophytes, insect pathogens, or plant pathogens. By using 15N labeled, Metarhizium infected, wax moth larvae (Galleria mellonella) in soil microcosms, I demonstrated that the common endophytic, insect pathogenic fungi Metarhizium spp. are able to infect living soil borne insects, and subsequently colonize plant roots and furnish ts plant host with useable, insect-derived nitrogen. In addition, I showed that another ecologically important, endophytic, insect pathogenic fungi, Beauveria bassiana, is able to transfer insect-derived nitrogen to its plant host. I demonstrated that these relationships between various plant species and endophytic, insect pathogenic fungi help to improve overall plant health. By using 13C-labeled CO2, added to airtight plant growth chambers, coupled with nuclear magnetic resosnance spectroscopy, I was able to track the movement of carbon from the atmosphere, into the plant, and finally into the root colonized fungal biomass. This indicates that Metarhizium exists in a symbiotic partnership with plants, where insect nitrogen is exchanged for plant carbon. Overall these studies provide the first evidence of nutrient exchange between an insect pathogenic fungus and plants, a relationship that has potentially useful implications on plant primary production, soil health, and overall ecosystem stability.

What Is a Commody? Two Axiomatic Anwers

We identify conditions under which preferences over sets of consumption opportunities can be reduced to preferences over bundles of \"commodities\". We distinguish ordinal bundles, whose coordinates are defined up to monotone transformations, from cardinal bundles, whose coordinates are defined up to positive linear transformations only.

Contribution of the C-terminal tri-lysine regions of human immunodeficiency virus type 1 integrase for efficient reverse transcription and viral DNA nuclear import

Affiliation: Zhujun Ao, Éric Cohen & Xiaojian Yao : Département de microbiologie et immunologie, Faculté de Médecine, Université de Montréal