Effects of orange by-product fiber incorporation on the functional and technological properties of pasta

AbstractThe incorporation of fiber into products consumed every day by the general population is important and viable. The aim of the present work was to evaluate the impact of incorporating orange juice industry dietary fiber byproducts in fettuccini of fresh pasta. Three different fiber concentrations were added to fresh pastas (25 g/kg, 50 g/kg and 75 g/kg). The results showed a significant increase in solid loss content when the incorporation of orange fiber was greater than 50 g/kg. This difference did not occur regarding weight increase values and color parameters. The pasta with 75 g/kg orange fiber can be considered a “high fiber” product, with the total dietary fiber content of the pasta increasing by 99% compared to control pasta. The carotenoid and phenolic contents of pasta increased significantly with the incorporation of fiber at 75 g/kg, but only the pasta formulation with 25 g/kg of orange fiber did not differ from control pasta in relation to all of the sensory attributes and presented an acceptance greater than 75%. The addition of orange fiber byproducts to pastas is an interesting alternative because fiber has a high nutritional value and an abundance of antioxidants.

Effect of incorporation of nutraceutical capsule waste of safflower oil in the mechanical characteristics of corn starch films

Abstract Biodegradable films blends made of safflower oil nutraceutical capsules waste corn starch (20:4, 30:4, 40:4 and 50:4) were prepared. The objective of this study was to evaluate the influence of addition of different concentrations of safflower oil nutraceutical capsule waste in the mechanical properties (tensile strength, elongation at break, Young’s modulus) and thickness of corn starch films. A decrease in tensile strength and Young’s modulus and an increase in elongation at break were observed with the increase in the content of the nutraceutical capsule waste. The results showed that the blends of safflower oil capsules waste-corn starch films demonstrated promising characteristics to form biodegradable films with different mechanical characteristics.

Modeling and kinetic study of bio-ethanol production from soy protein concentrate by-product

Abstract The aim of this work was to evaluate a non-agitated process of bioethanol production from soybean molasses and the kinetic parameters of fermentation using a strain of Saccharomyces cerevisiae (ATCC® 2345). Kinetic experiment was conducted in medium with 30% (w v-1) of soluble solids without supplementation or pH adjustment. The maximum ethanol concentration was in 44 hours, the ethanol productivity was 0.946 g L-1 h-1, the yield over total initial sugars (Y1) was 47.87%, over consumed sugars (Y2) was 88.08% and specific cells production rate was 0.006 h-1. The mathematical polynomial was adjusted to the experimental data and provided very similar parameters of yield and productivity. Based in this study, for one ton of soybean molasses can be produced 103 kg of anhydrous bioethanol.

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena Väitöskirjatutkimus tarkastelee kierrätystä ja uudelleenvalmistusta sekä siihen perustuvaa kierrätysliiketoimintaa taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena. Tässä kestävyys tarkoittaa jätekysymysten ratkaisemista tavalla, joka mahdollistaa kestävän kehityksen periaatteiden mukaisen yhteiskunnan kehittymisen. Jätteisiin liittyvät taloudelliset ja ekolo- giset kysymykset ovat merkittävä yhteiskunnallinen haaste. Tämä luo tarpeen tutkimukselle, jonka lähtökohtana on jätekysymysten moniulotteinen tarkas- telu ja yksittäisen yrityksen toiminnan suhteuttaminen osaksi laajempaa kokonaisuutta. Tässä tutkimuksessa jätteen hyödyntämistä materiaalina lähestytään sekä empiirisesti yrityksen näkökulmasta että teoreettisesti systeemiajattelun tarjoamasta laajemmasta perspektiivistä. Tutkimuksen tavoitteena on ymmär- tää kierrätystä ja uudelleenvalmistusta liiketoimintamahdollisuutena, niiden merkitystä yrityksessä, alueella ja kierrätystaloudessa sekä näiden vuorovai- kutteista suhdetta taloudelliseen ja ekologiseen kestävyyteen nähden. Tutki- muskysymys on tärkeä, koska siihen vastaamalla syvennetään ymmärrystä yrityksissä tapahtuvan kierrätyksen ja uudelleenvalmistuksen merkityksestä kestävämmän yhteiskunnan rakentumisessa. Tutkimuksen teoriaperusta pohjautuu teollisen ekologian kirjallisuuteen ja ekoteollisen kehityksen tutkimukseen. Kierrätysliiketoiminnan kestävyyden tarkastelu rakentuu tutkimuksessa teollisen ekologian ja ekoteollisen kehityk- sen lähtökohtana olevaan win-win-ajatteluun, jonka mukaan hyvä ympäristö- suorituskyky ja hyvä taloudellinen suorituskyky voivat vahvistaa toisiaan. Kierrätysliiketoiminnan teoreettisessa tarkastelussa keskeisiä elementtejä ovat kierrätystalouden malli, teollisen ekologian alueelliset systeemit, ekoteolliset verkostot ja yrityksen rooli teollista ekologiaa soveltavana toimijana. Tutki- muksen keskeisenä kontribuutiona on yritysnäkökulman integroiminen aiem- paa vahvemmin osaksi teollisen ekologian diskursseja. Kierrätysliiketoiminnan taloudelliseen ja ekologiseen kannattavuuteen ja sen myötä kestävyyteen liittyviä kysymyksiä on lähestytty tekemällä yritys- haastatteluja ja hyödyntämällä valmista haastatteluaineistoa. Tutkimusta varten haastattelin 10 kierrätysliiketoimintaa harjoittavaa yritystä vuosina 2007 ja 2008. Tämän lisäksi tutkimuksessa on hyödynnetty Turun ammatti- korkeakoulun ja Turku Science Parkin toteuttamassa RESU-hankkeessa (Kierrätysliiketoiminta ja resurssitehokkuus Varsinais-Suomen vahvuudeksi – RESU) vuosina 2013 ja 2014 kerättyä aineistoa. Hankkeessa haastateltiin yhteensä 25 jätemateriaalia hyödyntävää ja/tai tuottavaa yritystä. Aineistojen analysointimenetelmänä on sisällönanalyysi. Analyysin tulok- sena muodostettiin yhteensä viisi pääteemaa ja 12 alateemaa. Teemat kuvaavat kierrätysliiketoimintaa aiempaa moniulotteisemmin ja näin syventävät ymmär- rystä ilmiön merkityksestä kestävämmän yhteiskunnan rakentumisessa. Teolli- sen ekologian alaan kuuluvat kvalitatiiviset tutkimukset ovat melko harvinai- sia, joten tämän väitöstutkimuksen ilmeisenä vahvuutena on laadullisen tutkimusmenetelmän hyödyntäminen. Tutkimuksen tuloksena voidaan todeta, että kierrätystalouden kehittymistä edistävä kierrätysliiketoiminta on monimuotoista ja sisältää erilaisia liiketoi- mintamahdollisuuksia sekä arvoketjuja. Paikallistuntemus ja keskeinen sijainti jätemateriaalien tuottajien suhteen on tärkeä kriteeri kierrätysliiketoiminnassa, mutta jätemateriaaleja myös kuljetetaan pitkiä matkoja. Paikallisia tai alueelli- sia jätevirtoja hyödyntävä kierrätysliiketoiminta voi tukea alueellista kestä- vyyttä, mutta toisinaan myös keskitetty hyödyntäminen voi olla kestävä vaih- toehto. Yhteistyöverkostot ovat tärkeitä jätemateriaalin laadun ja saatavuuden näkökulmasta. Tutkimus osoittaa, että kierrätysliiketoimintaa harjoittavat yritykset ovat samalla sekä kierrätystalouden käytännön toimeenpanijoita että uuden toimintakulttuurin luojia. Tutkimuksen tulosten perusteella voidaan esittää johtopäätös, että kierrä- tysliiketoiminta on taloudellisesti ja ekologisesti kannattava liiketoimintamah- dollisuus. Win-win-ratkaisut eivät kuitenkaan takaa kierrätysliiketoiminnan kestävyyttä. Kierrätysliiketoiminnan kestävyyden arvioiminen edellyttää laajaa perspektiiviä ja toiminnan vaikutusten suhteuttamista mittakaavaan, ajalliseen ulottuvuuteen, interventioon ja sosiaalisiin kysymyksiin. Teolliseen ekologiaan perustuva kierrätysliiketoiminta luo mahdollisuuksia edistää kestävyyttä, joten tällä perusteella kierrätystä ja uudelleenvalmistusta voidaan pitää kestävänä liiketoimintamahdollisuutena. Avainsanat: kierrätysliiketoiminta, kierrätys, uudelleenvalmistus, systeemiajattelu, teollinen ekologia, ekoteollinen kehitys, kierrätystalous, win-win-ajattelu, kestävyys One company's waste is another's raw material –Recycling and remanufacturing as an economically and environmentally sustainable business opportunity The thesis investigates whether product recycling and remanufacturing can serve as a business opportunity that is economically and ecologically sustaina- ble. In this effort, my idea is to contribute to solving the waste issue in a manner that makes it possible to strive toward sustainable societal develop- ment. The economic and ecological questions associated with waste flows are a significant challenge. The complexity of the issue requires a multidimen- sional approach in which the operation of an individual company is viewed in the context of the larger societal system. In this thesis waste utilization as a resource with value is considered both from an empirical perspective on the firm as well as from a more general viewpoint offered by systems analysis. The objective of the thesis is to under- stand recycling and remanufacturing as a business opportunity. The thesis considers the meaning of recycling and remanufacturing for a single company, for the region the company is located and for the recycling economy. The objective of this study is important for it enhances the understanding of the product recycling and remanufacturing processes that take place within busi- ness organizations and how these processes affect societal sustainable development. The theoretical basis arises from industrial ecology and from the literature on eco-industrial development. The business-economic win-win situation and this vision serve as the basic position from which recycling business is inves- tigated in the thesis. In the theoretical discussion, key elements are recycling economy model, regional and local industrial ecosystems, eco-industrial networks and the role of a company as an actor that applies industrial ecology in practice. The main contribution of this study lies in integrating the company perspective more strongly into the industrial ecology discourses. The recycling business has been studied by conducting interviews in companies and by secondary analysis of an existing interview material. During 2007 and 2008 I made 10 interviews in companies that are active in recycling business. In addition, I used interview material gathered for the project “Recycling business and resource efficiency as the strength of Southwest Finland” (RESU) by Turku University of Applied Sciences and Turku Science Park during the period 2013–2014. This data covers altogether 25 businesses that either utilize and/or produce waste materials. The data has been analyzed using the content analysis method. This process led to the development of 5 main themes and 12 sub-themes. These themes describe the recycling business multi-dimensionally and thus understanding of the phenomenon and its role in building a sustainable society are substantially deepened in this research. In the field of industrial ecology qualitative studies are relatively rare and therefore the qualitative research approach is an evident strength of the thesis. The results show that the recycling business activity supporting recycling economy has diverse dimensions including various business opportunities and diverse value chains. The results show that for waste producers it is important to know the local situational factors and to have a central geographical location. Waste materials are, however, transported over long distances as well. The study indicates that local waste flow utilization can support regional sustainability, while occasionally a more centralized utilization can be sustain- able. Collaboration networks are important to secure the quality and availabil- ity of utilizable waste materials. The thesis demonstrates that the companies practicing recycling business serve simultaneously as actors that implement recycling economy and enhance a new operation culture within the business community. The overall conclusion of the thesis argues that recycling business is a business opportunity that can support both an economically and environmen- tally viable business operation. However, win-win solutions do not secure the sustainability of recycling business. The sustainability evaluation of recycling business requires a holistic systems perspective. The actions undertaken need to be considered with changing spatial and temporal system boundaries, societal intervention and placed in the context of relevant societal issues. Industrial ecology -based recycling business creates opportunities for sustain- ability and thus recycling and remanufacturing present an opportunity for sustainable business. Keywords: Recycling business; Recycling; Remanufacturing, Systems thinking; Industrial ecology; Eco-industrial development; Recycling Economy; Win-Win thinking; Sustainability

Reengineering and modelling of a product certification process

Työn teoriaosuudessa tutkittiin prosessien uudelleen suunnittelua, prosessien mallintamista sekä prosessimittariston rakentamista. Työn tavoitteena oli uudelleen suunnitella organisaation sertifiointiprosessi. Tämän tavoitteen saavuttamiseksi piti mallintaa nykyinen ja uusi prosessi sekä rakentaa mittaristo, joka antaisi organisaatiolle arvokasta tietoa siitä, kuinka tehokkaasti uusi prosessi toimii. Työ suoritettiin osallistuvana toimintatutkimuksena. Diplomityön tekijä oli toiminut kohdeorganisaatiossa työntekijänä jo useita vuosia ja pystyi näinollen hyödyntämään omaa tietämystään sekä nykyisen prosessin mallintamisessa, että uuden prosessin suunnittelussa. Työn tuloksena syntyi uusi sertifiointiprosessi, joka on karsitumpi ja tehokkaampi kuin edeltäjänsä. Uusi mittaristojärjestelmä rakennettiin, jota organisaation johto kykenisi seuraamaan prosessin sidosryhmien tehokkuutta sekä tuotteiden laadun kehitystä. Sivutuotteena organisaatio sai käyttöönsä yksityiskohtaiset prosessikuvaukset, joita voidaan hyödyntää koulutusmateriaalina uutta henkilöstöä rekrytoitaessa sekä informatiivisena työkaluna esiteltäessä prosessia virallisille sertifiointitahoille.

Product Assurance in Agile Space Systems Development

Product assurance is an essential part of product development process if developers want to ensure that final product is safe and reliable. Product assurance can be supported withrisk management and with different failure analysis methods. Product assurance is emphasized in system development process of mission critical systems. The product assurance process in systems of this kind requires extra attention. Inthis thesis, mission critical systems are space systems and the product assurance processof these systems is presented with help of space standards. The product assurance process can be supported with agile development because agile emphasizes transparency of the process and fast response to changes. Even if the development process of space systems is highly standardized and reminds waterfall model, it is still possible to adapt agile development in space systems development. This thesisaims to support the product assurance process of space systems with agile developmentso that the final product would be as safe and reliable as possible. The main purpose of this thesis is to examine how well product assurance is performed in Finnish space organizations and how product assurance tasks and activities can besupported with agile development. The research part of this thesis is performed in survey form.

Product assurance in agile space systems development

Product assurance is an essential part of product development process if developers want to ensure that final product is safe and reliable. Product assurance can be supported with risk management and with different failure analysis methods. Product assurance is emphasized in system development process of mission critical systems. The product assurance process in systems of this kind requires extra attention. In this thesis, mission critical systems are space systems and the product assurance process of these systems is presented with help of space standards. The product assurance process can be supported with agile development because agile emphasizes transparency of the process and fast response to changes. Even if the development process of space systems is highly standardized and reminds waterfall model, it is still possible to adapt agile development in space systems development. This thesis aims to support the product assurance process of space systems with agile development so that the final product would be as safe and reliable as possible. The main purpose of this thesis is to examine how well product assurance is performed in Finnish space organizations and how product assurance tasks and activities can be supported with agile development. The research part of this thesis is performed in survey form.

The role of product features on buyer-supplier collaboration in packaging industry

The thesis presents the study relative to the collaboration between suppliers and buyers in packaging industry with the impact of product features. The main purpose of this study is to examine the importance of product characteristics on collaboration to develop better packaging and to figure out how buyer-supplier collaboration in the supply chain perspectives is conducted and managed in packaging industry. The theoretical part reviewed some basic frameworks of collaboration including the scopes and levels of collaboration, risks as well as powers of collaboration, relationship and some key factors for successful collaboration. Followed by the overviews of packaging industry with the main issues related to product characteristics in packaging. By using the qualitative method, secondary data consisting of articles, reports, websites and primary data through interviewing some well-known packaging companies and case companies are collected in the thesis. The empirical result emphasized the importance of product features’ analysis in packaging industry since it plays a central role in the materials, design process, production and innovation with the role of collaboration. Collaboration in packaging is vital for packaging companies to survive and grow in the competitive environment. Finally, some key factors for effective collaboration were summarized based on the perspectives of packaging companies. It is highly recommend building a long-run collaboration with their customers due to undeniable benefits With increasingly importance of collaboration in packaging industry, further studies may be conducted.

PRODUCT DATA MANAGEMENT FOR FINNISH SMALL AND MEDIUM-SIZED MANUFACTURING ENTERPRISES - Towards a viable information system concept

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

Consumer-led new product development. Case: Dairy Industry

This thesis focuses on consolidation the recommendations on the integration of consumer in new product development (NPD) given in the academic literature, and on the example of the three NPD projects in the case company. The empirical findings advocate that the case company fulfills the principles of consumer-led NPD, and it is only one-step away of the full consumer empowerment strategy. Therefore, its NPD can be seen as an example of consumer-led NPD implementation. The findings also suggest that the product can be developed in consumer-led way regardless of the source of an idea (product- or need-driven), the target audience and resources assigned, in case when consumer mindset is integrated on all levels of organisation: strategic, cultural, operational and process. It is possible with top-management commitment, internal consumer research group, and the sophisticated consumer research methods. The specific managerial recommendations are given on developing consumer-led culture, strategy, NPD process and the appropriate consumer research methods and techniques.

Potential of energy and nutrient recovery from biodegradable waste by co-treatment in Lithuania

Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.

Jätteiden kemiallisten ominaisuuksien spektrometriset online-mittausmenetelmät

Tässä diplomityössä käsiteltiin spektrometrisia online-mittausmenetelmiä jätteiden kemiallisten ja fysikaalisten ominaisuuksien määrittämiseksi. Tavoitteena oli selvittää, mitä ominaisuuksia menetelmillä voidaan mitata ja kuinka luotettavia tuloksia mittauksilla saadaan. Diplomityössä suoritettiin kirjallisuuskatsaus, jossa käsiteltiin kolmen spektrometrisen menetelmän soveltuvuutta reaaliaikaisiin jätemittauksiin. Työn empiirisessä osassa FPXRFanalysaattorilla mitattiin neljän eri jätenäytteen alkuainepitoisuuksia. Mittauksen tarkoituksena oli selvittää, mitä alkuaineita menetelmällä voidaan mitata. FPXRF-analysaattorilla saatuja tuloksia verrattiin ICP-MS-menetelmällä saatuihin tuloksiin regressioanalyysin avulla. Työssä todettiin, että FPXRF-analysaattori sopii parhaiten kaliumin, kalsiumin, ja raudan pitoisuuksien määrittämiseen. Lisäksi lyijyn, sinkin, kromin, kloorin, kuparin, kadmiumin, arseenin, fosforin, molybdeenin ja vanadiinin määrittäminen on mahdollista, mutta tarkan pitoisuuden saamiseksi laboratoriomenetelmien käyttö voi olla tarpeen. Tutkituista jätenäytteistä menetelmä soveltui parhaiten tuhkalle ja kompostille niiden fyysisten ominaisuuksien, kuten homogeenisuuden ja kosteuspitoisuuden takia. Biojätteelle menetelmä soveltui huonosti. FPXRF-analysaattorin luotettavuuteen vaikuttaa näytteen kosteuspitoisuus, homogeenisuus, partikkelikoko, mittaustapa ja laitteen kalibrointi. Työssä tarkastelluilla menetelmillä ei voida tällä hetkellä täysin korvata laboratorioanalyyseja. FPXRF-analysaattoria voidaan kuitenkin käyttää kvalitatiiviseen tai semikvantitatiiviseen haitta-aineiden analysointiin, millä voidaan vähentää kalliiden laboratorioanalyysien tarvetta.

Characterization of design of a product for additive manufacturing

The purpose of conducting this thesis is to gather around information about additive manufacturing and to design a product to be additively manufactured. The specific manufacturing method dealt with in this thesis, is powder bed fusion of metals. Therefore when mentioning additive manufacturing in this thesis, it is referred to powder bed fusion of metals. The literature review focuses on the principle of powder bed fusion, the general process chain in additive manufacturing, design rules for additive manufacturing. Examples of success stories in additive manufacturing and reasons for selecting parts to be manufactured with additive manufacturing are also explained in literature review. This knowledge is demanded to understand the experimental part of the thesis. The experimental part of the thesis is divided into two parts. Part A concentrates on finding proper geometry for building self-supporting pipes and proper parameters for support structures of them. Part B of the experimental part concentrates on a case study of designing a product for additive manufacturing. As a result of experimental part A, the design process of self-supporting pipes, results of visual analysis and results of 3D scanning are presented. As a result of experimental part B the design process of the product is presented and compared to the original model.