Prevalence of hyperuricemia and relation of serum uric acid with cardiovascular risk factors in a developing country.

BACKGROUND: The prevalence of hyperuricemia has rarely been investigated in developing countries. The purpose of the present study was to investigate the prevalence of hyperuricemia and the association between uric acid levels and the various cardiovascular risk factors in a developing country with high average blood pressures (the Seychelles, Indian Ocean, population mainly of African origin). METHODS: This cross-sectional health examination survey was based on a population random sample from the Seychelles. It included 1011 subjects aged 25 to 64 years. Blood pressure (BP), body mass index (BMI), waist circumference, waist-to-hip ratio, total and HDL cholesterol, serum triglycerides and serum uric acid were measured. Data were analyzed using scatterplot smoothing techniques and gender-specific linear regression models. RESULTS: The prevalence of a serum uric acid level >420 micromol/L in men was 35.2% and the prevalence of a serum uric acid level >360 micromol/L was 8.7% in women. Serum uric acid was strongly related to serum triglycerides in men as well as in women (r = 0.73 in men and r = 0.59 in women, p < 0.001). Uric acid levels were also significantly associated but to a lesser degree with age, BMI, blood pressure, alcohol and the use of antihypertensive therapy. In a regression model, triglycerides, age, BMI, antihypertensive therapy and alcohol consumption accounted for about 50% (R2) of the serum uric acid variations in men as well as in women. CONCLUSIONS: This study shows that the prevalence of hyperuricemia can be high in a developing country such as the Seychelles. Besides alcohol consumption and the use of antihypertensive therapy, mainly diuretics, serum uric acid is markedly associated with parameters of the metabolic syndrome, in particular serum triglycerides. Considering the growing incidence of obesity and metabolic syndrome worldwide and the potential link between hyperuricemia and cardiovascular complications, more emphasis should be put on the evolving prevalence of hyperuricemia in developing countries.

No consistent association between processes-of-care and health-related quality of life among patients with diabetes : a missing link?

PURPOSE: Health-related quality of life (HRQoL) is considered a representative outcome in the evaluation of chronic disease management initiatives emphasizing patient-centered care. We evaluated the association between receipt of processes-of-care (PoC) for diabetes and HRQoL. METHODS: This cross-sectional study used self-reported data from non-institutionalized adults with diabetes in a Swiss canton. Outcomes were the physical/mental composites of the short form health survey 12 (SF-12) physical composite score, mental composite score (PCS, MCS) and the Audit of Diabetes-Dependent Quality of Life (ADDQoL). Main exposure variables were receipt of six PoC for diabetes in the past 12 months, and the Patient Assessment of Chronic Illness Care (PACIC) score. We performed linear regressions to examine the association between PoC, PACIC and the three composites of HRQoL. RESULTS: Mean age of the 519 patients was 64.5 years (SD 11.3); 60% were male, 87% reported type 2 or undetermined diabetes and 48% had diabetes for over 10 years. Mean HRQoL scores were SF-12 PCS: 43.4 (SD 10.5), SF-12 MCS: 47.0 (SD 11.2) and ADDQoL: -1.6 (SD 1.6). In adjusted models including all six PoC simultaneously, receipt of influenza vaccine was associated with lower ADDQoL (β=-0.4, p≤0.01) and foot examination was negatively associated with SF-12 PCS (β=-1.8, p≤0.05). There was no association or trend towards a negative association when these PoC were reported as combined measures. PACIC score was associated only with the SF-12 MCS (β=1.6, p≤0.05). CONCLUSIONS: PoC for diabetes did not show a consistent association with HRQoL in a cross-sectional analysis. This may represent an effect lag time between time of process received and health-related quality of life. Further research is needed to study this complex phenomenon.

Difference in distribution of microtubule-associated proteins 5a and 5b during the development of cerebral cortex and corpus callosum in cats: dependence on phosphorylation.

MAP5, a microtubule-associated protein characteristic of differentiating neurons, was studied in the developing visual cortex and corpus callosum of the cat. In juvenile cortical tissue, during the first month after birth, MAP5 is present as a protein doublet of molecular weights of 320 and 300 kDa, defined as MAP5a and MAP5b, respectively. MAP5a is the phosphorylated form. MAP5a decreases two weeks after birth and is no longer detectable at the beginning of the second postnatal month; MAP5b also decreases after the second postnatal week but more slowly and it is still present in the adult. In the corpus callosum only MAP5a is present between birth and the end of the first postnatal month. Afterwards only MAP5b is present but decreases in concentration more than 3-fold towards adulthood. Our immunocytochemical studies show MAP5 in somata, dendrites and axonal processes of cortical neurons. In adult tissue it is very prominent in pyramidal cells of layer V. In the corpus callosum MAP5 is present in axons at all ages. There is strong evidence that MAP5a is located in axons while MAP5b seems restricted to somata and dendrites until P28, but is found in callosal axons from P39 onwards. Biochemical experiments indicate that the state of phosphorylation of MAP5 influences its association with structural components. After high speed centrifugation of early postnatal brain tissue, MAP5a remains with pellet fractions while most MAP5b is soluble. In conclusion, phosphorylation of MAP5 may regulate (1) its intracellular distribution within axons and dendrites, and (2) its ability to interact with other subcellular components.

Modular support for developing mobile ad hoc applications

Abstract This PhD thesis addresses the issue of alleviating the burden of developing ad hoc applications. Such applications have the particularity of running on mobile devices, communicating in a peer-to-peer manner and implement some proximity-based semantics. A typical example of such application can be a radar application where users see their avatar as well as the avatars of their friends on a map on their mobile phone. Such application become increasingly popular with the advent of the latest generation of mobile smart phones with their impressive computational power, their peer-to-peer communication capabilities and their location detection technology. Unfortunately, the existing programming support for such applications is limited, hence the need to address this issue in order to alleviate their development burden. This thesis specifically tackles this problem by providing several tools for application development support. First, it provides the location-based publish/subscribe service (LPSS), a communication abstraction, which elegantly captures recurrent communication issues and thus allows to dramatically reduce the code complexity. LPSS is implemented in a modular manner in order to be able to target two different network architectures. One pragmatic implementation is aimed at mainstream infrastructure-based mobile networks, where mobile devices can communicate through fixed antennas. The other fully decentralized implementation targets emerging mobile ad hoc networks (MANETs), where no fixed infrastructure is available and communication can only occur in a peer-to-peer fashion. For each of these architectures, various implementation strategies tailored for different application scenarios that can be parametrized at deployment time. Second, this thesis provides two location-based message diffusion protocols, namely 6Shot broadcast and 6Shot multicast, specifically aimed at MANETs and fine tuned to be used as building blocks for LPSS. Finally this thesis proposes Phomo, a phone motion testing tool that allows to test proximity semantics of ad hoc applications without having to move around with mobile devices. These different developing support tools have been packaged in a coherent middleware framework called Pervaho.

Contribution of in vitro neurotoxicology studies to the elucidation of neurodegenerative processes.

Only a small percentage of neurodegenerative diseases like Alzheimer's disease and Parkinson's disease is directly related to familial forms. The etiology of the most abundant, sporadic forms seems to involve both genetic and environmental factors. Environmental compounds are now extensively studied for their possible contribution to neurodegeneration. Chemicals were found which were able to reproduce symptoms of known neurodegenerative diseases, others may either predispose to the onset of neurodegeneration, or exacerbate distinct pathogenic processes of these diseases. In any case, in vitro studies performed with models presenting various degrees of complexity have shown that many environmental compounds have the potential to cause neurodegeneration, through a variety of pathways similar to those described in neurodegenerative diseases. Since the population is exposed to a huge number of potentially neurotoxic compounds, there is an important need for rapid and efficient procedures for hazard evaluation. Xenobiotics elicit a cascade of reactions that, most of the time, involve numerous interactions between the different brain cell types. A reliable in vitro model for the detection of environmental toxins potentially at risk for neurodegenerative diseases should therefore allow maximal cell-cell interactions and multiparametric endpoints determination. The combined use of in vitro models and new analytical approaches using "omics" technologies should help to map toxicity pathways, and advance our understanding of the possible role of xenobiotics in the etiology of neurodegenerative diseases.

Control d'un sistema de marcatge làser de caixes

RESUM Avui en dia, l’alta competitivitat que existeix al mercat, fa que les empreses hagin d’esprémer al màxim les seves possibilitats per no quedar-se enrere. Un dels processos en que aquest fet hi és més present és el productiu. L’empresa JCM Technologies també engloba aquest camp i és en un dels seus processos productius on aquest projecte pren part. L’objectiu d’aquest projecte final de carrera ha estat desenvolupar un sistema per poder marcar caixes mitjançant un làser de CO2 i un automatisme manipulador de caixes. D’aquesta manera aquest procés productiu té una durada molt inferior a l’antic procés, que consistia en enganxar una etiqueta al lloc on ara és marcat pel làser. Per satisfer els objectius, s’ha creat una aplicació de Windows que per mitjà d’una interfície gràfica, permet a l’usuari realitzar els passos necessaris per fer el marcatge. Primerament es recullen les dades procedents de la comanda; seguidament es seleccionen les que s’han de marcar a les caixes i s’envien al làser mitjançant comunicació sèrie; una vegada aquesta inicialització ha finalitzat correctament, s’engega la seqüència de marcatge de les caixes, que en marcarà la quantitat indicada. Aquest procés de marcatge consisteix en supervisar l’estat en que es troben certes senyals, procedents de l’automatisme i del làser, i depenent d’aquestes generar-ne unes altres. Aconseguint així realitzar el procés de marcatge de cada caixa. Com a conclusions cal dir, que els objectius s’han complert, ja que s’ha aconseguit un procés de marcatge ràpid i robust. També s’ha aconseguit que les parts de configuració de l’aplicació, i de les caixes siguin de fàcil manipulació. Per tant, amb l’acompliment dels objectius d’aquest projecte, aconseguim completar el sistema de marcatge, i permetre que les caixes siguin marcades de forma correcta, ràpida i eficient.

Aplicatiu per gestionar la informació administrativa, tècnica i comptable per una empresa constructora

Les tendencies del mercat actual i futur obliguen a les empreses a ser cada vegada més competitives. Tota empresa que desitgi competir en el mercat actual ha de considerar la informació com un dels seus principals actius. Per aquesta raó, és necessari que l’empresa disposi dels sistemes d’informació adequats per ser gestionada. En les pimes ( petites i mitjanes empreses ), i en la majoria dels casos, la seva informació es troba repartida en diversos aplicatius informàtifcs. Això comporta principalment una duplicitat de dades, costos de manteniment i possibles errades en la informació. Dins del sector de les pimes, es troben empreses contructores d’un volum petit o mig, les quals enmagatzemen molta informació tècnica i de planificació per desemvolupar els seus projectes. Aquesta necessitat els hi suposa, tenir un aplicatiu eficient per la gestió i seguiment de la producció de les seves tasques i per altra banda l’aplicatiu necessari com qualsevol pime a nivell administratiu i comptable. L’objectiu principal d’aquest treball és generar un aplicatiu que integri la informació administrativa, comptable i tècnica per una empresa constructora. Amb l’assoliment d’aquest objectiu l’empresa constructora guanya temps en l’entrada i accés a les dades, evita la seva duplicitat i redueix el seu manteniment. En resum, redueix els costos de l’empresa i augmenta la seva seguretat en la informació. Un el mercat, existeixen aplicatius anomenats ERP ( Enterprise resource planning o sistemes de planificació de recursos ) els quals la seva gran virtud es la integració de les dades. Aprofitant aquests aplicatius i seleccionant-ne el més adequat, s’ha generat la part de gestió i planificació necessària per l’empresa constructora integrant-la i personalitzant-la en els processos existents de l’aplicació ( comptabilitat, ventes, compres, recursos humans, magatzems, etc… ) Entre les conclusions més rellevants obtingudes en aquest treball, voldriem destacar la millora i reducció d’entrada, accés i manteniment de la informació, l’històric que proporciona l’eina i per tan la millora de la gestío i planificació de l’empresa.

Disseny d'una màquina carregadora de planxa a l'empresa Serralleria i Alumini Vilaró (S.A.V)

Les empreses sempre han buscat com optimitzar el màxim els seus recursos i ser més eficients a la hora de realitzar les tasques que li han estat encomanades. És per aquest motiu que constantment les empreses realitzen estudis i valoracions de com poder millorar dia a dia. Aquest fet no és diferenciador a l’empresa Serralleria i Alumini Vilaró (S.A.V), que dia a dia estudia com optimitzar els seus processos o de vegades introduir-ne de nous per tal d’expandir la seva oferta de serveis. L’empresa és dedica a la fabricació de peces metàl•liques el procés ja sigui només de tall i mecanitzat, plegat, soldadura, acabats en inoxidable, pintura i fins i tot embalatge pel que fa a la part productiva, respecte a la part d’oficina tècnica també ofereix serveis de desenvolupament de productes segons especificacions del client i reenginyeria de qualsevol producte, analitzant la part que és vol millorar. En l’actualitat l’empresa ha detectat una mancança que creu que es podria solucionar, el problema és que l’empresa disposa de varies màquines de tall, entre les quals hi ha una màquina de tall làser i el problema principal és que la càrrega de les planxes del calaix de magatzem a la bancada de la màquina es realitza o bé manualment o a través d’un gripper sostingut al pont grua, depenent del pes de la planxa a transportar. L’objectiu principal d’aquest treball és fer el disseny d’una màquina que permeti automatitzar el procés de transportar la planxa metàl•lica del calaix de magatzem dipositat sobre una taula mòbil a la bancada de la màquina de tall. El disseny que pretenem fer és complet començant per fer un disseny estructural de la màquina més els seus respectius càlculs, moviments que volem aconseguir, tria de components ( motors, sensors ...), elaboració d’un pressupost per poder fer una estimació i finalment la elaboració del programa de control de tota la màquina més la interacció amb la màquina a través d’una pantalla tàctil. Es a dir, el que pretenem és realitzar un projecte que puguem fabricar en la realitat utilitzant tota la informació continguda dins del mateix