993 resultados para ddc: 005.741
Resumo:
若尔盖高原湿地位于青藏高原东北部地区,平均海拔3,400-3,600m,是长江和黄河的自然分水区,区内发育了大面积的草本沼泽以及高寒沼泽化草甸、高寒湖泊。由于它所处的位置海拔高、气候波动较大,并处于我国三大自然区的交错过渡带,因而被认为是我国最为典型的脆弱湿地生态系统之一。由于地处偏远、自然环境条件恶劣等多方面的原因,针对若尔盖湿地的科学研究资料一直以来还非常缺乏。本文对国内外近年来在湿地生态系统甲烷排放过程、研究方法,以及关于湿地生态系统甲烷排放的影响因素进行了综述,并采用静态箱-气相色谱法,从湿地环境格局、湿地甲烷排放等方面,对若尔盖高原典型高寒湖泊湖滨不同类型湿地甲烷排放特征进行了研究,并进一步探讨了影响若尔盖高原高寒湖泊湖滨带甲烷排放的因素。得到如下结果:1.若尔盖高原花湖湖滨湿地在植物生长季(6 至8 月),甲烷排放平均速率为0.315 mg·m-2·h-1;不同月份间甲烷排放速率存在差异,分别为:-0.054、0.471、0.493 mg·m-2·h-1。不同类型湿地甲烷排放速率亦表现出差异,两栖蓼(Polygonum amphibium)湿地、滩涂和藏嵩草(Kobresia tibetica)草甸甲烷排放速率分别为:0.464、0.477、0.005mg·m-2·h-1。2.若尔盖高原花湖湖滨湿地甲烷排放速率与土壤10cm 温度显著相关。土壤温度是影响若尔盖高原花湖湖滨不同类型湿地甲烷排放的重要因素之一。随着土壤温度的升高,土壤微生物活性增强,使土壤中的氧消耗加快,氧化还原电位下降,有利于产甲烷菌的生长,从而增加土壤的甲烷产生量。3.地表水位与若尔盖高原花湖湖滨湿地甲烷排放速率相关性不显著。地表水覆盖,使得湿地土壤缺氧状况得到加强,增强了土壤中产甲烷菌的活性,促进甲烷形成,再通过植物、气泡或扩散的形式释放出土壤。但水层的加深,也使土壤中已产生的甲烷在通过气泡或扩散形式穿越水层时,被氧化的量增加,从而减少了甲烷向大气中的排放。4.植被高度以及植被地上生物量与若尔盖高原花湖湖滨带甲烷排放速率的相关性不显著。植物主要通过凋落物以及根系分泌物的输入为产甲烷菌提供基质,并作为土壤与大气之间的甲烷气体交换的传输途径;与其他环境因素共同影响湿地生态系统甲烷排放。The Zoige wetland on the eastern fringe of Qinghai-Tibetan Plateau, with averagealtitude between 3,400 and 3,600m, is the watershed of Yangtze River and YellowRiver. There are large area of peatland, subalpine meadow and lakes in this region.Due to its high elevation, transitional topology and high fluctuation of climate, theZoige wetlands represent one of the most fragile wetland ecosystems in China. And asa result of remote location and harsh environment conditions, the researches on theZoige wetland are relatively rare, especially the researches on the methane emissionfrom littoral zone of alpine lakes. Variations of methane emission rates as measuredby the method of static chamber – gas chromatography (GC) were detected fromlittoral zone of alpine lake on the Zoige Plateau. Relationships between methaneemission rates and environmental factors were analyzed. It is concluded that:1.The average methane emission rate in the littoral zone of Huahu Lake, ZoigePlateau is 0.315 mg·m-2·h-1, with evident spatial and temporal variations. The littoralzone has different methane effluxes with -0.054, 0.471, and 0.493 mg·CH4·m-2·h-1in June, July and August respectively. Different types of wetland have differentmethane emission rates, with value of 0.464, 0.477, and 0.005 mg·CH4·m-2·h-1 forPolygonum amphibium wetland ( PA ), Shoal ( S ) and Kobresi tibetica meadow ( KT ), respectively.2. The soil temperature at 10cm is significantly correlated with the methane effluxesin littoral zone of Huahu Lake, Zoige Plateau, and which is one of the most important factors influencing the methane emission from this region. The activities of soilmicroorganisms rise under higher soil temperature and increases oxygen consumptionand decreases Eh, which is in favor of the methanogensis, and enhances theproduction of methane in soil.3. The correlation between the standing water and methane effluxes from littoralzone of Huahu Lake is not significant. Because of the standing water, the anaerobicconditions of wetland soil have been enhanced, and are favor to the decomposition oforganic matter. And the anaerobic conditions strengthen the methanogensis’ activities,thus the methane production, which release to the atmosphere by diffusion, ebullitionand aerenchymal plants. With the water level’s increase, more methane produced insoil which is transferred by ebullitions or diffusion are oxidated, thus reduce themethane release to the atmosphere.4. The height and aboveground biomass of vegetation are not significant related tothe methane effluxes from littoral zone of Huahu Lake, Zoige Plateau. The vegetationprovides substrates for methanogensis by litter and root exudates; act as thetransportation way of methane between soil and atmosphere; influence the methaneemission of wetland ecosystems with other environment factors.
Resumo:
同步加速器对控制信号的时间约束要求非常严格,时序控制是加速器控制系统中十分重要的环节。在兰州重离子加速器冷却储存环(HIRFL-CSR)控制系统中,时序控制主要采用FPGA+ARM+linux+DSP的体系结构。本文介绍基于FPGA和uClinux操作系统的片上可编程系统(SOPC)的设计,可将目前ARM+LINUX的工作完全集成在FPGA内实现,省去专用ARM芯片。其最高工作频率可达185 MHz,硬件资源消耗不到4%。片上可编程系统的硬件处理器系统和操作系统都可根据具体需求重新裁剪和配置。SOPC技术在加速器物理以及其他领域有着非常广泛的应用前景。
Resumo:
基于同位旋和动量依赖的强子输运IBUU04模型,研究了~(132)Sn+~(124)Sn碰撞系统中的质子椭圆流对对称能的敏感关系.研究发现入射能量从每核子400MeV到800MeV时质子椭圆流在低横动量端对对称能的敏感性高于高横动量端,同时发现随着入射能量的增大,质子椭圆流对对称能的敏感性在降低.在研究入射能量范围内,当入射能量为每核子400MeV左右时质子椭圆流对对称能最为敏感.
Resumo:
Based on the isospin- and momentum-dependent transport model IBUU04, we calculated the reaction of the Sn-132+Sn-124 systems in semi-central collisions at beam energies of 400/A MeV, 600/A MeV and 800/A MeV by adopting two different density dependent symmetry energies. It was found that the proton differential elliptic flow as a function of transverse momentum is quite sensitive to the density dependence of symmetry energy, especially for the considered beam energy range. Therefore the proton differential elliptic flow may be considered as a robust probe for investigating the high density behavior of symmetry energy in intermediate energy heavy ion collisions.
Resumo:
In terms of single-atom induced dipole moment by Lewenstein model, we present the macroscopic high-order harmonic generation from mixed He and Ne gases with different mixture ratios by solving three-dimensional Maxwell's equation of harmonic field. And then we show the validity of mixture formulation by Wagner et al. [Phys. Rev. A 76 (2007) 061403(R)] in macroscopic response level. Finally, using least squares fitting we retrieve the electron return time of short trajectory by formulation in Kanai et al. [Phys. Rev. Lett. 98 (2007) 153904] when the gas jet is put after the laser focus.
Resumo:
Geometry optimization and harmonic vibrational frequency calculations have been performed on the (X) over bar (2)A(1) state of NO2 and (X) over bar (1)A(1) state of NO2-. Franck-Condon analyses and spectral simulations were carried out on the NO2((X) over bar (2)A(1))-NO2-((X) over bar (1)A(1)) photo detachment process. In addition, the equilibrium geometry parameters, r(NO)= 1.248 +/- 0.005 Angstrom and angle(ONO) 116.8 +/- 0.5degrees, of the (X) over bar (1)A(1) state of NO2-, are derived by employing an iterative Franck-Condon analysis procedure in the spectral simulation. Our conclusions regarding the anion geometry suggest a reinterpretation of the results of Woo et al. (C) 2004 Published by Elsevier B.V.
Resumo:
The heat capacities of chrysanthemic acid in the temperature range from 80 to 400 K were measured with a precise automatic adiabatic calorimeter. The chrysanthemic acid sample was prepared with the purity of 0.9855 mole fraction. A solid-liquid fusion phase transition was observed in the experimental temperature range. The melting point, T-m, enthalpy and entropy of fusion, Delta(fus)H(m), Delta(fus)S(m), were determined to be 390.741 +/- 0.002 K, 14.51 +/- 0.13 kJ mol(-1), 37.13 +/- 0.34 J mol(-1) K-1, respectively. The thermodynamic functions of chrysanthemic acid, H-(T)-H-(298.15), S-(T)-S-(298.15) and G((T))-G((298.15)) were reported with a temperature interval of 5 K. The TG analysis under the heating rate of 10 K min(-1) confirmed that the thermal decomposition of the sample starts at ca. 410 K and terminates at ca. 471 K. The maximum decomposition rate was obtained at 466 K. The purity of the sample was determined by a fractional melting method.
Resumo:
阐述了包膜型控释肥料的定义,介绍了常见的包膜肥料的类型,归纳了其评价方法,并简单分析了控释肥料存在的问题及发展前景。