Hitsaus- ja liimausmenetelmien mahdollisuudet puumuovikomposiittien liittämisessä

Diplomityössä tutkittiin puumuovikomposiittien liitettävyyttä hitsaamalla ja liimaamalla. Työn kirjallisessa osuudessa tutustuttiin aiheeseen liittyviin tutkimuksiin, jotta saatiin käsitys miten liittäminen voisi onnistua. Työn empiirisessä osuudessa tehtiin liitoskokeita valituilla materiaaleilla eri menetelmillä. Liitoksia tutkittiin sekä rikkovilla, että rikkomattomilla aineenkoestusmenetelmillä. Valitut materiaalit poikkesivat koostumuksellaan hieman toisistaan, joten tuloksista pystyttiin päättelemään, mitkä ominaisuudet vaikuttavat milläkin tavalla liitettävyyteen. Johtopäätöksinä tässä tutkimuksessa voidaan todeta, että komposiitit ovat sekä hitsattavissa, että liimattavissa, mutta materiaalin koostumus vaikuttaa merkittävästi siihen, millä tavoin kappaleet liittyvät toisiinsa. Pääasiassa kaikki materiaalit liittyivät kohtuullisella tavalla. Oikeanlaisten liittämisarvojen määrittäminen reseptikohtaisesti vaatii tarkempia tutkimuksia.

Modern Metallic Materials for Arctic Environment

This thesis is part of the Arctic Materials Technologies Development –project, which aims to research and develop manufacturing techniques, especially welding, for Arctic areas. The main target of this paper is to clarify what kind of European metallic materials are used, or can be used, in Arctic. These materials include mainly carbon steels but also stainless steels and aluminium and its alloys. Standardized materials, their properties and also some recent developments are being introduced. Based on this thesis it can be said that carbon steels (shipbuilding and pipeline steels) have been developed based on needs of industry and steels exist, which can be used in Arctic areas. Still, these steels cannot be fully benefited, because rules and standards are under development. Also understanding of fracture behavior of new ultra high strength steels is not yet good enough, which means that research methods (destructive and non-destructive methods) need to be developed too. The most of new nickel-free austenitic and austenitic-ferritic stainless steels can be used in cold environment. Ferritic and martensitic stainless steels are being developed for better weldability and these steels are mainly developed in nuclear industry. Aluminium alloys are well suitable for subzero environment and these days high strength aluminium alloys are available also as thick sheets. Nanotechnology makes it possible to manufacture steels, stainless steels and aluminium alloys with even higher strength. Joining techniques needs to be developed and examined properly to achieve economical and safe way to join these modern alloys.

Software for design of experiments and response modelling of cake filtration applications

Filtration is a widely used unit operation in chemical engineering. The huge variation in the properties of materials to be ltered makes the study of ltration a challenging task. One of the objectives of this thesis was to show that conventional ltration theories are di cult to use when the system to be modelled contains all of the stages and features that are present in a complete solid/liquid separation process. Furthermore, most of the ltration theories require experimental work to be performed in order to obtain critical parameters required by the theoretical models. Creating a good overall understanding of how the variables a ect the nal product in ltration is somewhat impossible on a purely theoretical basis. The complexity of solid/liquid separation processes require experimental work and when tests are needed, it is advisable to use experimental design techniques so that the goals can be achieved. The statistical design of experiments provides the necessary tools for recognising the e ects of variables. It also helps to perform experimental work more economically. Design of experiments is a prerequisite for creating empirical models that can describe how the measured response is related to the changes in the values of the variable. A software package was developed that provides a ltration practitioner with experimental designs and calculates the parameters for linear regression models, along with the graphical representation of the responses. The developed software consists of two software modules. These modules are LTDoE and LTRead. The LTDoE module is used to create experimental designs for di erent lter types. The lter types considered in the software are automatic vertical pressure lter, double-sided vertical pressure lter, horizontal membrane lter press, vacuum belt lter and ceramic capillary action disc lter. It is also possible to create experimental designs for those cases where the variables are totally user de ned, say for a customized ltration cycle or di erent piece of equipment. The LTRead-module is used to read the experimental data gathered from the experiments, to analyse the data and to create models for each of the measured responses. Introducing the structure of the software more in detail and showing some of the practical applications is the main part of this thesis. This approach to the study of cake ltration processes, as presented in this thesis, has been shown to have good practical value when making ltration tests.

Education export as a form of knowledge transfer : The potential of Finnish education export in Chile

Knowledge transfer is a complex process. Knowledge transfer in the form of exporting education products from one system of education to another is particularly complicated, because each system has been developed in a particular context to meet the requirements seen as relevant at each time. National innovation systems are often seen to form an essential framework within which the development of a country, its economy and level of knowledge are considered and promoted. These systems are orientated towards the future, and as such they also provide a framework for the knowledge transfer related to the development of education. In the best of circumstances they are able to facilitate and boost this transfer both from the viewpoint of the provider and the recipient. The leading thought and the idea of the study is that education export is a form of knowledge transfer, which is illustrated by the existing models included. The purpose of this study is to explore, analyze and describe the factors and phenomena related to education export, and more specifically, those related to the experiences and potential of Finnish education export to Chile. For better understanding, of the multiplicity of the issue involved, the current status of education export between Finland and Chile and he existing efforts within the Finnish innovation network will be outlined as well as new forms of co-operation between Finland and Chile in educational matters explored. Several countries have started to commercialize their education system in order to establish themselves as emerging education exporters. Moreover, the demand for education reform is accurate in many developing countries. This offers a good match between Finland and Chile to be the example countries of the research. The main research findings suggest that there are several business areas in education export. These include degrees in education, training services and education technologies for example The factors that influence education export can be divided into four groups, including academic, cultural, political and economic aspects. Challenges to overcome include the lack of product or services to be sold, lack of market and cultural knowledge of the buyer country, financing and lack of suitable pricing model. National innovation systems could be seen as enabling entities for successful education export. The extensive networks that national innovation systems aim to form, could operate as a basis for joining the forces in selling knowledge as well as receiving knowledge in a constructive way.

CO2 sparging for improving the filtration properties of iron ore slurries

Iron ore treatment processes are usually continuous and high tonnage and filtration equipment has to meet these requirements. In magnetite (Fe3O4) treatment process continuous rotary disc filters are often used for filtration. Carbon dioxide (CO2) treatment is a fairly novel and un-known filtration enhancing process. The interest to use CO2 is quite high because CO2 is a greenhouse gas that is abundant, readily available and capture and use of CO2 would be environmentally beneficial. The focus of this thesis was to investigate if CO2 could be used to enhance the filtration of magnetite with ceramic disc filter. Previous studies have suggested that CO2 could be used to enhance the filtration properties of different iron ores thus increasing the filtration capacity. In the literature part, the basic theory of filtration and the particle properties affecting filtration were discussed. The basic steps of a typical ore treatment process were presented. The reasons why CO2 might enhance the filtration properties of different ores were investigated. A literature survey of earlier studies of CO2 addition as a filter aid was presented and the basic chemical properties and reactions of CO2 were also discussed. The experimental part was done at the LUT Laboratory of Separation Technology using different magnetite samples from the industry. The filtration experiments indicated that CO2 had a positive influence on the filtration properties of magnetite slurry. Zeta potential of untreated and CO2 treated magnetite was measured and CO2 treated magnetite had lower zeta potential values than the untreated magnetite. The filtration capacity was increased while the cake moisture levels were only slightly increased.

Performance of active portfolio management and the effect of stock market trend

Purpose of the study is to evaluate performance of active portfolio management and the effect of stock market trend on the performance. Theory of efficient markets states that market prices reflect all available information and that all investors share a common view of future price developments. This view gives little room for the success of active management, but the theory has been disputed – at least the level of efficiency. Behavioral finance has developed theories that identify irrational behavior patterns of investors. For example, investment decisions are not made independent of past market developments. These findings give reason to believe that also the performance of active portfolio management may depend on market developments. Performance of 16 Finnish equity funds is evaluated during the period of 2005 to 2011. In addition two sub periods are constructed, a bull market period and a bear market period. The sub periods are created by joining together the two bull market phases and the two bear market phases of the whole period. This allows for the comparison of the two different market states. Performance of the funds is measured with risk-adjusted performance by Modigliani and Modigliani (1997), abnormal return over the CAPM by Jensen (1968), and market timing by Henriksson and Merton (1981). The results suggested that in average the funds are not able to outperform the market portfolio. However, the underperformance was found to be lower than the management fees in average which suggests that portfolio managers are able to do successful investment decisions to some extent. The study revealed substantial dependence on the market trend for all of the measures. The risk-adjusted performance measure suggested that in bear markets active portfolio managers in average are able to beat the market portfolio but not in bull markets. Jensen´s alpha and the market timing model also showed striking differences between the two market states. The results of these two measures were, however, somewhat problematic and reliable conclusions about the performance could not be drawn.

Maidon ja heran mikrosuodatus

Työssä selvitettiin uudenaikaisten polymeerikalvojen soveltuvuutta maidon sekä heran mikrosuodatukseen. Kirjallisessa osassa perehdyttiin maidon ja heran koostumuksiin, mikrobikantoihin sekä erilaisiin maidon sekä heran rasvanpoisto- ja puhdistusmenetelmiin. Tämän lisäksi käsiteltiin mikrosuodatusmenetelmiä sekä niiden käyttöä heran ja maidon käsittelyssä meijeriteollisuudessa. Kokeellisessa osassa verrattiin kahdella eri suodatuslaitteistolla keraami- ja polymeerikalvojen suodatusominaisuuksia separoidun raakamaidon sekä heran poikkivirtausmikrosuodatuksessa. Tavoitteena oli erottaa suodatettavista liuoksista mikrobit sekä jäännösrasva ja tuottaa puhdasta, proteiinipitoista maitoa / heraa. Koeajoissa otetuista näytteistä analysoitiin ainesosakoostumus sekä mikrobipitoisuudet. Tuloksista määritettiin retentioarvot ja näiden perusteella vertailtiin polymeeri- ja keraamikalvojen erotustehokkuutta. Lisäksi kalvojen toimivuutta arvioitiin vuoarvojen avulla. Raakamaidon suodatuksissa polymeerikalvot pidättivät täydellisesti tai lähes täydellisesti jäännösrasvan ja mikrobit, mutta myös kaseiiniproteiinin. Tästä syystä yksikään polymeerikalvoista ei sovellu puhtaan maidon suodatukseen. Keraamikalvot soveltuvat tähän selkeästi paremmin ja yksikään toinen testatuista kalvoista ei päässyt samalle tasolle meijeriteollisuudessa jo käytössä olevan Membralox 1,4 μm -keraamikalvon kanssa. Heran suodatuksissa polymeerikalvot pidättivät täydellisesti tai lähes täydellisesti rasvan ja mikrobit, mutta keraamikalvo päästi huomattavasti enemmän haluttuja proteiineja permeaattiin. Membralox 0,8 μm -keraamikalvo pidätti täydellisesti mikrobit, mutta päästi jonkin verran jäännösrasvaa permeaattiin. Näin ollen kalvovalinta on kompromissi permeaatin puhtauden ja proteiinin saannon välillä. Keraamikalvojen vuohäviöt olivat merkittävästi pienemmät kuin polymeerikalvoilla molempien syöttöliuosten kanssa. Lisäksi keraamikalvojen puhdistus oli huomattavasti nopeampaa ja helpompaa. Tästä syystä keraamiset kalvot soveltuvat polymeerisiä paremmin maidon ja heran mikrosuodatukseen.

Laser-TIG hybrid welding process

Joining processes and techniques need to meet the trend of new applications and the development of new materials. The application in connection with thick and thin plates in industrial fields is wide and the joining technology is in very urgent need. The laser-TIG hybrid welding technology can play the respective advantages of both of them. One major advantage of the hybrid laser-TIG welding technology is its efficient use of laser energy. Additionally, it can develop into a high and new advanced welding technology and become a hot spot in both the application and research area. This thesis investigated laser –TIG hybrid welding with the aim of enlightening the reader on its advantages, disadvantages and future areas of improvement. The main objective is to investigate laser-TIG hybrid on the welding of various metals (steels, magnesium, aluminium etc.). In addition, it elaborates on various possible combinations on hybrid laser-TIG welding technology and their benefits. The possibility of using laser-TIG hybrid in welding of thick materials was investigated. The method applied in carrying out this research is by using literature review. The results showed that hybrid laser-TIG is applicable to almost all weldable metals. Also it proves to be effective in welding refractive metals. The possibility of welding with or without filler materials is of economic advantage especially in welding of materials with no filler material. Thick plate’s hybrid laser-TIG welding is showing great prospects although it normally finds its used in welding thin materials in the range of 0.4 to 0.8 mm. The findings show that laser-TIG hybrid welding can be a versatile welding process and therefore will be increasingly used industrially due to its numerous advantages and the development of new TIG arc that enhances its capabilities.

Syntyykö Suomeen puulaaksoja - Suomen puutuoteteollisuuden pk-yritysten tila ja tulevaisuus

Metsäteollisuus on tullut Suomeen ulkomaisen pääoman ja tietotaidon avulla vajaat kaksisataa vuotta sitten. Se on toiminut melkein koko jatkosodan jälkeisen ajan suojatussa ympäristössä ja ulkomaisesta kilpailusta riippumattomassa toimintaympäristössä. Kuten Porter ja muut ovat todistaneet, tällainen toimintaympäristö ei kehitä kansainvälisesti kilpailukykyistä teollisuutta globaaleilla markkinoilla. Liittyminen Euroopan unioniin ja sittemmin Euroopan rahaliittoon saattoi puunjalostusteollisuuden täysin uudenlaiseen kilpailutilanteeseen. Sama tapahtui myös alan pk-yrityksille, jotka olivat joutuneet toimimaan heikosti kilpailluilla raaka-ainemarkkinoilla. Tutkimus on tulevaisuudentutkimus, jossa tutkimusongelmia lähestytään kolmen teorian avulla. Porterin klusteriteoria tarjoaa mahdollisuuden arvioida metsäteollisuutta sekä kokonaisuutena että toimivana monimuotoisena organisaationa, jossa kustannukset ja hinta muodostuvat arvoketjun toimijoiden osakustannuksista. Bionomiateoria eli darvinistinen talousteoria testaa suomalaisen puunjalostusteollisuuden pk-yritysten kilpailukykyä ja paineita hakeutua edullisemmille toiminta- alueille. Evoluutioteoria tarkastelee sukupolvenvaihdoksen problematiikkaa. Sukupolvenvaihdoksen onnistuminen muodostuu puutoimialan elämän ja kuoleman kysymykseksi. Tämä on etenkin pk-yrityksiä kohtaava ongelma. Asiaa selvitettiin Mauno Rintalan suorittamalla kyselytutkimuksella Puuteollisuusyrittäjien jäsenistön keskuudessa. Ongelma johtuu suurista sodan jälkeen syntyneistä ikäluokista. Nämä vuosina 1945– 50 syntyneet ovat siirtymässä eläkkeelle vuosien 2005 ja 2015 välillä. Kyseisissä ikäluokissa yritystiheys on noin kaksi kertaa suurempi kuin sen jälkeisissä ikäluokissa. Suoritetun kyselyn sekä muiden suomalaisten ja kansainvälisten tutkimusten perusteella näyttää siltä, että eläkkeelle siirryttäessä vain noin 30 %:lla yrityksistä on jatkaja tiedossa suvusta tai lähipiiristä. Tämä merkitsee sitä, että 70 % eläköityvän ikäluokan omistamista yrityksistä poistuu pysyvästi markkinoilta. Suomessa poistuma merkitsee noin 40 % koko yritysvarannosta eli noin 80 000 yritystä. Tilastot toimivien yritysten määrästä ovat kuitenkin hyvin ristiriitaisia, joten todellista määrää on mahdoton arvioida. Noin suuren määrän poistuminen markkinoilta uhkaa jo hyvinvointivaltion perusrakenteita. Tutkimustulos edellyttää nopeita toimenpiteitä teollisten pkyritysten pelastamiseksi ja säilyttämiseksi Suomessa. Sukupolvenvaihdoksen onnistuminen on tässä prosessissa ensiarvoisessa asemassa. Kaikkien edellä mainittujen yritysten poistuminen markkinoilta edellyttäisi noin 400 000 uuden yrityksen perustamista, koska ainoastaan noin 20 % yrityksistä selviää ensimmäiset kolme vuotta. Tutkimukseen perustuen esitetään prosessimalli sukupolvenvaihdoksen suorittamiseksi. Suomen tärkeimmissä kilpailijamaissa valtioiden metsäomistus on määräävässä asemassa. Meillä metsät ovat yksityisessä omistuksessa ja vain pieni osa valtion omistuksessa. Puumarkkinat toimivat markkinatalouden ehdoilla ilman valtion ohjausta. Ongelmaksi on kehittymässä puun saanti. Metsänomistus on sukupolvien myötä hajaantunut hyvin pieniksi metsälöiksi. Nykyiset metsänomistajat asuvat kaupungeissa ja ovat pääosin palkkatyössä. He eivät ole samalla tavoin riippuvaisia puutuloista kuin heidän esi-isänsä. Metsäverotuksen uudistuminen lisää puun saannin epävarmuutta. Se on muuttumassa pinta-alaverotuksesta puun myynnin verotukseen. Puun myynti on vilkasta ennen järjestelmien vaihtumista ja vähäisempää sen jälkeen. Myös näitä ongelmia on pyritty ratkomaan uudenlaisen metsänomistusmallin avulla. Puuteollisuus on hyvin vanha teollisuudenala. Raaka-aine muodostaa määräävän osan kustannuksista. Muutokset ovat hitaita ja todelliset innovaatiot pitkäkestoisia. Uusia innovaatioita tapahtuu harvoin. Kannattavuutta parannetaan tuoteprosessien ja arvoketjujen kehittämisen kautta. Yhteiskunnan osuus alan kehittämisessä ja säilyttämisessä on ratkaiseva. Asioiden moninaisuus tekee tutkimuksen vaikeaksi, mutta sitäkin tärkeämmäksi kansantalouden kannalta. Tällaisissa suurissa murroksissa korostuu kaikkien päättävien tahojen henkinen valmius ja tahto tehdä oikeita ratkaisuja oikeaan aikaan.

Análise filogenética de isolados do vírus da raiva de herbívoros na fronteira de Minas Gerais e São Paulo (2000-2009), Brasil

A raiva transmitida por morcegos hematófagos da espécie Desmodus rotundus representa uma preocupação de saúde pública e causa de importantes prejuízos para a pecuária brasileira. A evidência atual sugere que a ocorrência de raiva está relacionada às características da paisagem, topografia, hidrografia, sistemas de produção animal e usos da terra. Contudo, existem poucos estudos que analisem as possíveis conexões entre fatores geográficos e a diversidade molecular do vírus da raiva, permitindo a compreensão da dinâmica espacial e temporal dos focos de raiva. Um desses trabalhos estabeleceu que a última epizootia de raiva dos herbívoros registrada no leste do estado de São Paulo (na fronteira com Minas Gerais), aconteceu em duas ondas epidêmicas, sendo a primeira em 1998 e, em 1999, a segunda. Considerando esta evidência, o intuito do presente estudo foi analisar casos de raiva em herbívoros na região sudeste de Minas Gerais (2000-2009) e sua possível relação com a epidemia previamente mencionada, incluindo as características geográficas da região. Foram obtidas sequencias parciais dos genes da glicoproteína (539 nt) e da nucleoproteína (414 nt) a partir de 31 isolados de vírus da raiva procedentes de herbívoros. Foi proposta uma árvore filogenética para cada região genômica usando o método de Neighbor joining, fixando o modelo evolutivo Kimura 2 - parâmetros com um nível de bootstrap de 1000 replicações. As sublinhagens genéticas foram localizadas sobre mapas, considerando as áreas de risco para raiva dos herbívoros em São Paulo, assim como as características topográficas e bacias hidrográficas com o intuito de visualizar qualquer padrão aparente de distribuição segundo essas características. As duas árvores filogenéticas mostraram topologias concordantes, sugerindo uma possível origem comum para os surtos que aconteceram ao longo da fronteira SP/MG, ao redor das porções menos elevadas da Serra da Mantiqueira e acompanhando as bacias hidrográficas dos rios Piracicaba/Jaguarí, Paranaíba do Sul, Grande, Pardo e Mogi-Guaçu. Foi possível observar circulação de varias linhagens virais simultaneamente em alguns municípios, possivelmente por causa de sobreposição de surtos. As sequencias de proteína inferidas a partir dos dois genes mostraram mutações sinônimas, excetuando aquelas encontradas entre os resíduos 20 a 200, correspondentes ao domínio externo da glicoproteína. Esta informação salienta a importância da cooperação entre as autoridades sanitárias de ambos os estados para reforçar o programa de controle da doença nas áreas limítrofes.

Advanced ceramics: evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the h max can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Optimization of parameters for fiber laser-MAG hybrid welding in shipbuilding applications

The Arctic region becoming very active area of the industrial developments since it may contain approximately 15-25% of the hydrocarbon and other valuable natural resources which are in great demand nowadays. Harsh operation conditions make the Arctic region difficult to access due to low temperatures which can drop below -50 °C in winter and various additional loads. As a result, newer and modified metallic materials are implemented which can cause certain problems in welding them properly. Steel is still the most widely used material in the Arctic regions due to high mechanical properties, cheapness and manufacturability. Moreover, with recent steel manufacturing development it is possible to make up to 1100 MPa yield strength microalloyed high strength steel which can be operated at temperatures -60 °C possessing reasonable weldability, ductility and suitable impact toughness which is the most crucial property for the Arctic usability. For many years, the arc welding was the most dominant joining method of the metallic materials. Recently, other joining methods are successfully implemented into welding manufacturing due to growing industrial demands and one of them is the laser-arc hybrid welding. The laser-arc hybrid welding successfully combines the advantages and eliminates the disadvantages of the both joining methods therefore produce less distortions, reduce the need of edge preparation, generates narrower heat-affected zone, and increase welding speed or productivity significantly. Moreover, due to easy implementation of the filler wire, accordingly the mechanical properties of the joints can be manipulated in order to produce suitable quality. Moreover, with laser-arc hybrid welding it is possible to achieve matching weld metal compared to the base material even with the low alloying welding wires without excessive softening of the HAZ in the high strength steels. As a result, the laser-arc welding methods can be the most desired and dominating welding technology nowadays, and which is already operating in automotive and shipbuilding industries with a great success. However, in the future it can be extended to offshore, pipe-laying, and heavy equipment industries for arctic environment. CO2 and Nd:YAG laser sources in combination with gas metal arc source have been used widely in the past two decades. Recently, the fiber laser sources offered high power outputs with excellent beam quality, very high electrical efficiency, low maintenance expenses, and higher mobility due to fiber optics. As a result, fiber laser-arc hybrid process offers even more extended advantages and applications. However, the information about fiber or disk laser-arc hybrid welding is very limited. The objectives of the Master’s thesis are concentrated on the study of fiber laser-MAG hybrid welding parameters in order to understand resulting mechanical properties and quality of the welds. In this work only ferrous materials are reviewed. The qualitative methodological approach has been used to achieve the objectives. This study demonstrates that laser-arc hybrid welding is suitable for welding of many types, thicknesses and strength of steels with acceptable mechanical properties along very high productivity. New developments of the fiber laser-arc hybrid process offers extended capabilities over CO2 laser combined with the arc. This work can be used as guideline in hybrid welding technology with comprehensive study the effect of welding parameter on joint quality.

Supplier codes of conduct: Acting responsibly in global supply chains

Nowadays the Western companies are considered responsible for the social and environmental issues in their whole supply chains. To influence the practices of their suppliers the Western companies have created suppliers codes of conduct (SCCs) which express their requirements. Suppliers’ compliance with the SCCs is checked through audits. The purpose of this thesis is to analyze SCCs as a means for Western companies to ensure socially and environmentally responsible actions in their global supply chains, and the sub-objectives are to find out 1) how well do the SCCs and their auditing work at suppliers’ production sites and 2) how can possible problems related to SCCs and their auditing be solved. This is a qualitative research carried out in the form of a case study with two case companies. In this study both primary and secondary data is used. The primary data is collected in the form of interviews of the case company representatives and three external experts. Based on a theoretical framework of previous research in the fields of corporate social responsibility and supply chain management, a model with eleven factors, which influence the success of SCC implementation and the auditing of SCC –implementation, is drafted. Also several different best-practices to help to solve and avoid possible problems related to SCC -implementation and auditing have been identified from previous research. Based on the findings of this study the theoretical model has been updated adding two new influential factors. It seems that how well the SCC and its auditing work at suppliers’ production sites depends on the joint effect of thirteen influential factors: buyer’s purchasing policy, supplier’s motivation, buyer’s commitment, the solving of agency problems, the contents of the SCC, supplier’s role and the buyer-supplier –relationship, complexity of supply chain, the limitations of the smaller buyers, cooperation through a business association or multi-stakeholder system, the role of supplier’s employees, SCC –related communication and supplier’s understanding, cheating in audits and the auditors. The possible problems related to SCCs and their auditing can be solved by adopting best-practices. Nine of the theoretical best-practices stand out from the findings of this study: 1) two-way communication and collecting feedback from suppliers, 2) the philosophy of continuous improvement, 3) long-term business relationships with the supplier, 4) informing the supplier about the advantages of SCC –compliance, 5) rewarding code-compliant suppliers, 6) building collaborative, good buyer-supplier relationships, 7) supporting and advising the supplier, 8) joining a business association or multi-stakeholder system and 9) interviewing supplier’s employees as a part of the audits.

A comparative study of eleven protein systems in tamarins, genus Saguinus (Platyrrhini, Callitrichinae)

The genetic variability of six tamarin taxa, genus Saguinus, was analyzed comparatively using protein data from eleven systems coded by 15 loci. S. fuscicollis weddelli and S. midas midas were the most polymorphic taxa, and S. bicolor the least. The results of the phylogenetic analyses (UPGMA and neighbor-joining) and the genetic distances between taxa were generally consistent with their geographic and probable phylogenetic relationships. Analyses of the S. bicolor and S. midas populations suggested that they represent no more than three subspecies of a single species, S. midas, with the bicolor forms belonging to a single subspecies, S. midas bicolor. If supported by additional studies, this would have important implications for the conservation of the bicolor form, which is endangered with extinction. The genetic similarity of S. fuscicollis and S. mystax was also consistent with their geographical and morphological proximity, although more data from a larger number of taxa will be required before the taxonomic relationships within the genus can be defined.

A 37-kb restriction map of the human immunoglobulin lambda variable locus, VB cluster, harboring four functional genes and two non-coding Vl sequences

The human immunoglobulin lambda variable locus (IGLV) is mapped at chromosome 22 band q11.1-q11.2. The 30 functional germline v-lambda genes sequenced untill now have been subgrouped into 10 families (Vl1 to Vl10). The number of Vl genes has been estimated at approximately 70. This locus is formed by three gene clusters (VA, VB and VC) that encompass the variable coding genes (V) responsible for the synthesis of lambda-type Ig light chains, and the Jl-Cl cluster with the joining segments and the constant genes. Recently the entire variable lambda gene locus was mapped by contig methodology and its one- megabase DNA totally sequenced. All the known functional V-lambda genes and pseudogenes were located. We screened a human genomic DNA cosmid library and isolated a clone with an insert of 37 kb (cosmid 8.3) encompassing four functional genes (IGLV7S1, IGLV1S1, IGLV1S2 and IGLV5a), a pseudogene (VlA) and a vestigial sequence (vg1) to study in detail the positions of the restriction sites surrounding the Vl genes. We generated a high resolution restriction map, locating 31 restriction sites in 37 kb of the VB cluster, a region rich in functional Vl genes. This mapping information opens the perspective for further RFLP studies and sequencing