Interatomic potentials for fusion reactor material simulations

Fusion energy is a clean and safe solution for the intricate question of how to produce non-polluting and sustainable energy for the constantly growing population. The fusion process does not result in any harmful waste or green-house gases, since small amounts of helium is the only bi-product that is produced when using the hydrogen isotopes deuterium and tritium as fuel. Moreover, deuterium is abundant in seawater and tritium can be bred from lithium, a common metal in the Earth's crust, rendering the fuel reservoirs practically bottomless. Due to its enormous mass, the Sun has been able to utilize fusion as its main energy source ever since it was born. But here on Earth, we must find other means to achieve the same. Inertial fusion involving powerful lasers and thermonuclear fusion employing extreme temperatures are examples of successful methods. However, these have yet to produce more energy than they consume. In thermonuclear fusion, the fuel is held inside a tokamak, which is a doughnut-shaped chamber with strong magnets wrapped around it. Once the fuel is heated up, it is controlled with the help of these magnets, since the required temperatures (over 100 million degrees C) will separate the electrons from the nuclei, forming a plasma. Once the fusion reactions occur, excess binding energy is released as energetic neutrons, which are absorbed in water in order to produce steam that runs turbines. Keeping the power losses from the plasma low, thus allowing for a high number of reactions, is a challenge. Another challenge is related to the reactor materials, since the confinement of the plasma particles is not perfect, resulting in particle bombardment of the reactor walls and structures. Material erosion and activation as well as plasma contamination are expected. Adding to this, the high energy neutrons will cause radiation damage in the materials, causing, for instance, swelling and embrittlement. In this thesis, the behaviour of a material situated in a fusion reactor was studied using molecular dynamics simulations. Simulations of processes in the next generation fusion reactor ITER include the reactor materials beryllium, carbon and tungsten as well as the plasma hydrogen isotopes. This means that interaction models, {\it i.e. interatomic potentials}, for this complicated quaternary system are needed. The task of finding such potentials is nonetheless nearly at its end, since models for the beryllium-carbon-hydrogen interactions were constructed in this thesis and as a continuation of that work, a beryllium-tungsten model is under development. These potentials are combinable with the earlier tungsten-carbon-hydrogen ones. The potentials were used to explain the chemical sputtering of beryllium due to deuterium plasma exposure. During experiments, a large fraction of the sputtered beryllium atoms were observed to be released as BeD molecules, and the simulations identified the swift chemical sputtering mechanism, previously not believed to be important in metals, as the underlying mechanism. Radiation damage in the reactor structural materials vanadium, iron and iron chromium, as well as in the wall material tungsten and the mixed alloy tungsten carbide, was also studied in this thesis. Interatomic potentials for vanadium, tungsten and iron were modified to be better suited for simulating collision cascades that are formed during particle irradiation, and the potential features affecting the resulting primary damage were identified. Including the often neglected electronic effects in the simulations was also shown to have an impact on the damage. With proper tuning of the electron-phonon interaction strength, experimentally measured quantities related to ion-beam mixing in iron could be reproduced. The damage in tungsten carbide alloys showed elemental asymmetry, as the major part of the damage consisted of carbon defects. On the other hand, modelling the damage in the iron chromium alloy, essentially representing steel, showed that small additions of chromium do not noticeably affect the primary damage in iron. Since a complete assessment of the response of a material in a future full-scale fusion reactor is not achievable using only experimental techniques, molecular dynamics simulations are of vital help. This thesis has not only provided insight into complicated reactor processes and improved current methods, but also offered tools for further simulations. It is therefore an important step towards making fusion energy more than a future goal.

Studies of electronic structure by x-ray Raman and emission spectroscopy: applications to MgB2 superconductors and high pressure physics

X-ray Raman scattering and x-ray emission spectroscopies were used to study the electronic properties and phase transitions in several condensed matter systems. The experimental work, carried out at the European Synchrotron Radiation Facility, was complemented by theoretical calculations of the x-ray spectra and of the electronic structure. The electronic structure of MgB2 at the Fermi level is dominated by the boron σ and π bands. The high density of states provided by these bands is the key feature of the electronic structure contributing to the high critical temperature of superconductivity in MgB2. The electronic structure of MgB2 can be modified by atomic substitutions, which introduce extra electrons or holes into the bands. X ray Raman scattering was used to probe the interesting σ and π band hole states in pure and aluminum substituted MgB2. A method for determining the final state density of electron states from experimental x-ray Raman scattering spectra was examined and applied to the experimental data on both pure MgB2 and on Mg(0.83)Al(0.17)B2. The extracted final state density of electron states for the pure and aluminum substituted samples revealed clear substitution induced changes in the σ and π bands. The experimental work was supported by theoretical calculations of the electronic structure and x-ray Raman spectra. X-ray emission at the metal Kβ line was applied to the studies of pressure and temperature induced spin state transitions in transition metal oxides. The experimental studies were complemented by cluster multiplet calculations of the electronic structure and emission spectra. In LaCoO3 evidence for the appearance of an intermediate spin state was found and the presence of a pressure induced spin transition was confirmed. Pressure induced changes in the electronic structure of transition metal monoxides were studied experimentally and were analyzed using the cluster multiplet approach. The effects of hybridization, bandwidth and crystal field splitting in stabilizing the high pressure spin state were discussed. Emission spectroscopy at the Kβ line was also applied to FeCO3 and a pressure induced iron spin state transition was discovered.

Enhancing the learning experiences through Industry-Based Learning from Indonesian university perspective

This paper investigates how students’ learning experience can be enhanced by participating in the Industry-Based Learning (IBL) program. In this program, the university students coming into the industry to experience how the business is run. The students’ learning media is now not coming from the textbooks or the lecturers but from learning by doing. This new learning experience could be very interesting for students but at the same time could also be challenging. The research involves interviewing a number of students from the IBL programs, the academic staff from the participated university who has experience in supervising students and the employees of the industry who supported and supervised the students in their work placements. The research findings offer useful insights and create new knowledge in the field of education and learning. The research contributes to the existing knowledge by providing a new understanding of the topic as it applied to the Indonesian context.

Realisation of University-Industry Collaboration through Industry-Based Learning at Indonesian Higher Education

The collaboration between universities and industries has become increasingly important for the development of Science and Technology. This is particularly more prominent in the Science Technology Engineering and Mathematics (STEM) disciplines. Literature suggest that the key element of University-Industry Partnership (UIP) is the exchange of knowledge that is mutually beneficial for both parties. One real example of the collaborations is Industry-Based Learning (IBL) in which university students are coming into industries to experience and learn how the skills and knowledge acquired in the classroom are implemented in work places. This paper investigate how the University-Industry Collaboration program is implemented though Industry-Based Learning (IBL) at Indonesian Universities. The research findings offer useful insights and create a new knowledge in the field of STEM education and collaborative learning. The research will contribute to existing knowledge by providing empirical understanding of this topic. The outcomes can be used to improve the quality of University-Industry Partnership programs at Indonesian Universities and inform Indonesian higher education authorities and their industrial partners of an alternative approach to enhance their IBL programs.

Experiences in becoming a paramedic: The professional socialization of university qualified paramedics

In this article, the professional socialization of university educated paramedics from the United Kingdom and Australia is discussed using the anticipatory, formal and post-formal phases of socialization. Participants for this research were from universities and ambulance services in Australia and the United Kingdom, and the data were collected and analyzed by qualitative methods. The anticipatory, formal and post-formal phases were deemed to be relevant to the professional socialization of university paramedics. However a fourth phase, called the post-internship phase was identified which better accounted for the paramedic training and practice model. The findings from this research led to the development of a four phase model of professional socialization to describe the experiences of university educated paramedics making the transition from university students to qualified paramedics.

Rural first year university students: As engaged, aspirational and motivated as anyone – but different science ‘choices’ in year 12 and university

This paper reports on findings from the Interests and Recruitment in Science study, which explored the experiences of first year students studying science, technology, engineering and mathematics (STEM) courses in Australian universities. First year STEM students who went to school in rural or regional areas were as engaged, aspirational and motivated as their more metropolitan counterparts. However, they were less likely to have studied physics or advance mathematics, and more likely to have enrolled in an Agricultural or Environmental Science degree. The relationships between these results and broader contextual issues such as employment and Higher Education budgetary and policy settings are discussed.

Kahdestaan kotona : Tutkimus vanhoista pariskunnista

In this study, which pertains to the field of social gerontology and family research, I analyse the meaning of everyday life as perceived by elderly couples living at home. I use the ethnographic approach, with the aim of interpreting meanings from the elderly people s personal point of view and to increase understanding of their way of life. The study deepens our conception of what gives purpose to the everyday life of elderly people. The number of elderly couples is growing and, to an increasing extent, a couple will live and cope together to a ripe old age. Such coping can also be viewed as an important resource for society. Ethnography tries to get close to people's life practices. I examine the day-to-day life of elderly couples based on textual data, which I obtained by visiting the homes of 16 couples in a total of five small municipalities in Southern Finland. The couples had married soon after the war or in the early 1950s. I found that the aspiration towards continuity, which unites the concepts of place and home, housework and a long marriage, is the most important notion connecting the discussion themes. The results show that in the opinion of the elderly, the concept of a good life is intertwined with a long marriage spent at home, as well as its values. Old people find that they lead an independent life if they feel that they can hold on to the key features of their way of life. Elderly couples ability to cope with everyday life involves taking care of housework and other tasks around the home together. This means that they support one another and have common goals and aspirations. Daily tasks provide substance in the lives of elderly couples. Each day has its rhythm, and the pace of this rhythm is set by routine and habits. Satisfaction stems from the fact that you can do something you are good at. The couples have also revised the division of housework. Men have learned to perform new tasks around the house when their wives can no longer manage them by themselves. Some tasks are given up. Day-to-day life at home and around the house provides room for men s participation. Mutual support and care between husband and wife can also protect them from having to resort to outside or official help. Old couples integrate their life experiences and memories, as well as present and future risks and opportunities. They wish to carry on their lives as before, and still think that their present life corresponds with their idea of a good life. Key words: elderly couples, continuity theory of aging, everyday life, social gerontology, family research

Determinants of institutional care at older ages in Finland

Väitöskirjassa selvitettiin ikäihmisten laitoshoitoon siirtymisen todennäköisyyttä ja sen taustoja kansainvälisesti ainutlaatuisen rekisteriaineiston avulla. Selvitettäviä asioita olivat eri sairauksien, sosioekonomisten tekijöiden, puolison olemassaolon ja leskeksi jäämisen yhteys laitoshoitoon siirtymiseen yli 65-vuotiailla suomalaisilla. Tutkimuksessa havaittiin, että dementia, Parkinsonin tauti, aivohalvaus, masennusoireet ja muut mielenterveysongelmat, lonkkamurtuma sekä diabetes lisäsivät ikäihmisten todennäköisyyttä siirtyä laitoshoitoon yli 50 prosentilla, kun muut sairaudet ja sosiodemografiset tekijät oli otettu huomioon. Korkeat tulot vähensivät laitoshoidon todennäköisyyttä, kun taas puutteellinen asuminen (ilman peseytymistiloja tai keskus- tai sähkölämmitystä) sekä erittäin puutteellinen asuminen (ilman lämmintä vettä, vesijohtoa, viemäriä tai vesivessaa) lisäsivät todennäkösyyttä, kun muut sosiodemografiset tekijät, sairaudet ja asuinalue oli huomioitu. Kerrostalon hissittömyys ei ollut yhteydessä laitoshoidon todennäköisyyteen. Todennäköisyys siirtyä laitoshoitoon oli jostain syystä korkeampaa niillä ikäihmisillä, jotka asuivat vuokralla ja matalampaa omakotitalossa asuvilla ja niillä, joilla oli auto. Puolison olemassaolo vähensi ja leskeksi jääminen lisäsi laitoshoidon todennäköisyyttä huomattavasti. Todennäköisyys oli erityisen suuri, yli kolminkertainen, kun puolison kuolemasta oli kulunut enintään kuukausi verrattuna niihin, joiden puoliso oli elossa. Todennäköisyys laski, kun puolison kuolemasta kului aikaa. Miesten ja naisten tulokset olivat samansuuntaisia. Korkeat tulot tai koulutus eivät suojanneet riskiltä joutua laitoshoitoon puolison kuoltua. Puolison kuolema näyttää lisäävän hoidon tarvetta, kun kotona ei ole enää puolisoa tukemassa ja huolehtimassa kodin askareista. Laitoshoidon tarve vähenee, jos ja kun lesket ajan kuluessa oppivat elämään yksin. Toisaalta tutkimustulokset saattavat viitata myös siihen, että kaikkein huonokuntoisimmat lesket, jotka eivät pärjää yksin asuessaan, siirtyvät laitoshoitoon hyvin nopeasti puolison kuoltua. Tutkimuksessa oli mukana yhteensä yli 280 000 yli 65-vuotiasta henkilöä, joiden pitkäaikaiseen laitoshoitoon siirtymistä seurattiin tammikuusta 1998 syyskuuhun 2003. Laitoshoidoksi määriteltiin terveyskeskuksissa, sairaaloissa ja vanhainkodeissa tai vastaavissa yksiköissä tapahtuva pitkäaikainen hoito, joka kesti yli 90 vuorokautta tai oli vahvistettu pitkäaikaishoidon päätöksellä. Tutkimuksessa käytetty aineisto koottiin väestörekistereistä, sosiaali- ja terveydenhuollon rekistereistä ja lääkerekistereistä.

Survival in the Rainforest : Change and Resilience among the Punan Vuhang of Eastern Sarawak, Malaysia

This dissertation concerns the Punan Vuhang, former hunter-gatherers who are now part-time farmers living in an area of remote rainforest in the Malaysian state of Sarawak. It covers two themes: first, examining their methods of securing a livelihood in the rainforest, and second looking at their adaptation to a settled life and agriculture, and their response to rapid and large-scale commercial logging. This study engages the long-running debates among anthropologists and ecologists on whether recent hunting-gathering societies were able to survive in the tropical rainforest without dependence on farming societies for food resources. In the search for evidence, the study poses three questions: What food resources were available to rainforest hunter-gatherers? How did they hunt and gather these foods? How did they cope with periodic food shortages? In fashioning a life in the rainforest, the Punan Vuhang survived resource scarcity by developing adaptive strategies through intensive use of their knowledge of the forest and its resources. They also adopted social practices such as sharing and reciprocity, and resource tenure to sustain themselves without recourse to external sources of food. In the 1960s, the Punan Vuhang settled down in response to external influences arising in part from the Indonesian-Malaysian Confrontation. This, in turn, initiated a series of processes with political, economic and religious implications. However, elements of the traditional economy have remained resilient as the people continue to hunt, fish and gather, and are able to farm on an individual basis, unlike neighboring shifting cultivators who need to cooperate with each other. At the beginning of the 21st century, the Punan Vuhang face a new challenge arising from the issue of rights in the context of the state and national law and large-scale commercial logging in their forest habitat. The future seems bleak as they face the social problems of alcoholism, declining leadership, and dependence on cash income and commodities from the market.

Homeowners' Associations in Russia after the 2005 Housing Reform

The thesis examines homeowners associations as a part of the large-scale housing reform, implemented in Russia since 2005. The reform transferred housing management from the public sector to the private sector and to the citizens responsibility. The reform is a continuation to the privatisation of the housing stock that was started in Russia in the beginning of the 1990s, aiming to build a market-oriented housing sector in the country. The reform makes a fundamental change to the Soviet system, in which ownership along with management and maintenance of housing were monopolised by the state. Homeowners are now responsible for the management of the common areas in privatised houses, which is often realised by establishing a homeowners association. Homeowners associations are examined by using the so-called common-pool resource regime approach, with the main question being the ways in which taking care of common property collectively succeeds in practice. The study is based on interview data of St. Petersburg s homeowners associations. Using the common-pool resource theory the study demonstrates why implementation of the housing reform has not succeeded as expected. Certain elements that characterise a successful common-pool resource regime do not fulfill sufficiently in St. Petersburg s homeowners associations. Firstly, free-riding, that is, withdrawal from the association s joint decision-making and not making the housing payments is common, as effective sanctions to prevent it are missing in the legislation. That is, eviction or expelling a non-paying member from the association is not possible. Secondly, ownership of the land plot and common areas of the house, such as basements and attics, are often disputed between the associations and authorities. In the Soviet era, these common areas were public property along with the apartments, but in privatised houses they should, according to the legislation, belong to the associations property. Thirdly, solution of disputes between the associations and authorities and within the associations is difficult, as the court system tends to be bureaucratic and inefficient. In addition to the common-pool resource approach, the study also examines how social capital contributes to the associations effectiveness and democratic governance. The study finds that although homeowners associations have increased cooperation and tightened social relations between neighbours, social capital has not been able to prevent free-riding. The study shows that unlike it is often claimed, the so-called Soviet mentality , that is, residents passiveness and unwillingness to participate, is not the most important obstacle to the reform. Instead, the reform is impeded most of all by imperfect institutional arrangements and local authorities that prevent the associations from working as independent, self-governing associations.

Enhancing Physics Education in the National Defence University : A design based research approach in the production of learning material

This research is connected with an education development project for the four-year-long officer education program at the National Defence University. In this curriculum physics was studied in two alternative course plans namely scientific and general. Observations connected to the later one e.g. student feedback and learning outcome gave indications that action was needed to support the course. The reform work was focused on the production of aligned course related instructional material. The learning material project produced a customized textbook set for the students of the general basic physics course. The research adapts phases that are typical in Design Based Research (DBR). The research analyses the feature requirements for physics textbook aimed at a specific sector and frames supporting instructional material development, and summarizes the experiences gained in the learning material project when the selected frames have been applied. The quality of instructional material is an essential part of qualified teaching. The goal of instructional material customization is to increase the product's customer centric nature and to enhance its function as a support media for the learning process. Textbooks are still one of the core elements in physics teaching. The idea of a textbook will remain but the form and appearance may change according to the prevailing technology. The work deals with substance connected frames (demands of a physics textbook according to the PER-viewpoint, quality thinking in educational material development), frames of university pedagogy and instructional material production processes. A wide knowledge and understanding of different frames are useful in development work, if they are to be utilized to aid inspiration without limiting new reasoning and new kinds of models. Applying customization even in the frame utilization supports creative and situation aware design and diminishes the gap between theory and practice. Generally, physics teachers produce their own supplementary instructional material. Even though customization thinking is not unknown the threshold to produce an entire textbook might be high. Even though the observations here are from the general physics course at the NDU, the research gives tools also for development in other discipline related educational contexts. This research is an example of an instructional material development work together the questions it uncovers, and presents thoughts when textbook customization is rewarding. At the same time, the research aims to further creative customization thinking in instruction and development. Key words: Physics textbook, PER (Physics Education Research), Instructional quality, Customization, Creativity