Theory and Application of the Transient Injection Well Test

Based on the theory of the pumping well test, the transient injection well test was suggested in this paper. The design method and the scope of application are discussed in detail. The mathematical models are developed for the short-time and long-time transient injection test respectively. A double logarithm type curve matching method was introduced for analyzing the field transient injection test data. A set of methods for the transient injection test design, experiment performance and data analysis were established. Some field tests were analyzed, and the results show that the test model and method are suitable for the transient injection test and can be used to deal with the real engineering problems.

Diagnóstico comparativo de mastitis en leche bovina, por tres pruebas de campo: california mastitis test (CMT), acidez (NaOH), y reductasa, en los municipios de la Concordia, San Rafael del Norte y San Sebastián de Yali, Jinotega

Con el propósito de evaluar tres técnicas para la determinación de Mastitis, (California Mastitis Test (CMT), Hidróxido de Sodio (NaHO) y Azul de Metíleno (AM)), en vacas de doble propósito, en 2000 se efectuó un estudio en los municipios de La Concordia, San Rafael de Norte y San Sebastián de Yalí, del Departamento de Jinotega. Se utilizaron Fincas de Referencia atendidas por el entonces Ministerio de Agricultura y Ganadería (MAG), de las cuales se seleccionaron catorce (14) fincas privadas y dos Cooperativas, para un total de 16 fincas que representaron el 53.3 % del total de fincas. De éstas se muestrearon 398 vacas en producción de diversas razas (Pardo suizo, Brahman y cruces entre Pardo suizo, Criollo y Holstein con Cebú y otros) de diversas lactaciones (número parto}. Las muestras de cada cuarto de la vaca, se tomaron a la hora del ordeño, entre 5:00 y 7:00a.m. Los resultados de CMT e NaHO, (+ ó -), se anotaron en campo al momento de prueba. En la prueba de AM, se hicieron 4 lecturas: 1) al momento de prueba, 2) a los 15 minutos, 3) a una hora y, 4) a tres horas después de la prueba. Se obtuvo un total de 396 datos de 4 cuartos en cada técnica, para un total de 4,752 observaciones. La información se analizó mediante una prueba de Chí Cuadrado, con el Procedimiento CATMOD, del Statistical Análisis System (SAS), Versión para PC 6.03, NC. Las variables de clasificación en el análisis fueron Razas (1-3), Números de Parto (1-6) y Meses de lactación (1-9). De las técnicas, se obtuvo el 46.2, 4.6 y 15.3 % de pruebas positivas con CMT, NaOH y AM, respectivamente; la CMT resultó más efectiva en la determinación de mastitis. De las Razas estudiadas, el Brahmán presentó un 45.2% de afectación por mastitis, mayor que Pardo suizo y cruces indefinidos, con 30.6 y 24.2 %, respectivamente. A partir del tercer parto, se incrementa el nivel de infestación de esta enfermedad, y durante la lactación, en los meses 4, 5,8 y 9.

Nonuniformity Effect of Surface-Nanocrystalline Materials in Nanoindentation Test

In the present research, microstructures of the surface-nanocrystalline Al alloy material are observed and measured based on the transmission electron microscopy (TEM) technique, and the corresponding mechanical behaviors are investigated experimentally and theoretically. In the experimental research, the nanoindentation test method is used, and the load and microhardness curves are measured, which strongly depend on the grain size and grain size nonuniformity. Two kinds of the nanoindentation test methods are adopted: the randomly selected loading point method and the continuous stiffness method. In the theoretical modeling, based on the microstructure characteristics of the surface-nanocrystalline Al alloy material, a dislocation pile-up model considering the grain size effect and based on the Mott theory is presented and used. The hardness-indent depth curves are predicted and modeled.

Assessment of Microscale Test Methods of Peeling and Splitting along Surface of Thin-Film/Substrates

Peel test methods are assessed through being applied to a peeling analysis of the ductile film/ceramic substrate system. Through computing the fracture work of the system using the either beam bend model (BB model) or the general plane analysis model (GPA model), surprisingly, a big difference between both model results is found. Although the BB model can capture the plastic dissipation phenomenon for the ductile film case as the GPA model can, it is much sensitive to the choice of the peeling criterion parameters, and it overestimates the plastic bending effect unable to capture crack tip constraint plasticity. In view of the difficulty of measuring interfacial toughness using peel test method when film is the ductile material, a new test method, split test, is recommended and analyzed using the GPA model. The prediction is applied to a wedge-loaded experiment for Al-alloy double-cantilever beam in literature.

Impossibilità di pensare Dio non esistente : il Proslogion di Anselmo d'Aosta come applicazione implicita dei moderni procedimenti di logica aletica

Resumen: La vera intenzione teologica di Anselmo d’Aosta nello scrivere il Proslogion e il vero significato del suo celebre unum argumentum vanno visti nella funzione che la ragione svolge necessariamente all’interno della vita di fede del cristiano. Anselmo, come Tommaso d’Aquino, non sostiene che l’esistenza di Dio sia un “articulus fidei” ma piuttosto uno dei “praeambula fidei”. La ragione naturale ha la certezza che Dio esiste, ancora prima della dimostrazione metafisica, e questo non fa che confermare l’assurdità di pensare che non esista il fondamento reale di tutte le cose esistenti.

Deformation and Failure of Polymer Bonded Explosives under Diametric Compression Test

The tensile deformation and failure of polymer bonded explosives (PBXs), a particulate composite, is studied in this paper. Two HMX-based PBXs with different binder were selected for study. A diametric compression test, in which a disc-shaped specimen is loaded diametrically, was chosen to generate tensile failure in the materials. The quasi-static tensile properties and the tensile creep properties were studied by using conventional displacement transducers to measure the lateral strain along the horizontal diameter. The whole-field in-plane creep deformation was measured by using the technique of high resolution moire´ interferometry. Real time microscopic examination was conducted to monitor the process of deformation and failure of PBXs by using a scanning electron microscope equipped with a loading stage. A manifold method (MM) was used to simulate the deformation and failure of PBX samples under the diametric compression test, including the crack initiation, crack propagation and final cleavage fracture. The mechanisms of deformation and failure of PBXs under diametric compression were analyzed. The diametric compression test and the techniques developed in this research have proven to be applicable to the study of tensile properties of PBXs.

Size Effect and Geometrical Effect of Solids in Micro-Indentation Test

Micro-indentation tests at scales of the order of sub-micron show that the measured hardness increases strongly with decreasing indent depth or indent size, which is frequently referred to as the size effect. At the same time, at micron or sub-micron scale, another effect, which is referred to as the geometrical size effects such as crystal grain size effect, thin film thickness effect, etc., also influences the measured material hardness. However, the trends are at odds with the size-independence implied by the conventional elastic-plastic theory. In the present research, the strain gradient plasticity theory (Fleck and Hutchinson) is used to model the composition effects (size effect and geometrical effect) for polycrystal material and metal thin film/ceramic substrate systems when materials undergo micro-indenting. The phenomena of the "pile-up" and "sink-in" appeared in the indentation test for the polycrystal materials are also discussed. Meanwhile, the micro-indentation experiments for the polycrystal Al and for the Ti/Si_3N_4 thin film/substrate system are carried out. By comparing the theoretical predictions with experimental measurements, the values and the variation trends of the micro-scale parameter included in the strain gradient plasticity theory are predicted.

La distruzione delle statue di Pausania nella Sparta tardoantica (Lib. Ep. 1518)

Abstract: The late antique destruction of two bronze statues of Pausanias - the Spartan general responsible for the Greek victory at the Battle of Plataea (479 BC) - housed in the temple of Athena Chalkioikos in Sparta (Lib. Ep. 1518), has been interpreted as one of the few cases of a violent conflict between pagan and Christian population in Greece. Nevertheless the sources suggest that late antique Sparta was a bastion of Hellenic paganism and give a picture of a small and quiet town ruled by a pagan educated élite, where pagans like Libanius wanted to live. Since there is no evidence of a violent conflict between pagans and Christians in Sparta, and Libanius confirms that in 365 AD all the temples and cult statues were still in place, this paper addresses the issue from a different point of view and offers a new contribution to the history of Sparta in Late Antiquity. By using literary, archaeological and epigraphic evidence the paper explores: 1) the relationship between Roman administration and Spartan élite in the IVth century AD; 2) the historical memory of Pausanias in Late Antiquity. It will be emphasized that the obscure burning of the two statues helped to remove from Sparta the memory of Pausanias - a controversial figure, misrepresented in Late Antiquity and connected to the ancient staseis in Laconia - in order to promote a positive image of Sparta as a city without conflicts and ruled by the political system of Lycurgus (eunomia). As documented by local inscriptions in praise of late Roman governors, the mythical lawgiver Lycurgus was the paradigm of the imperial governors who rebuilded the town in the IVth cent. AD. It can be assumed that while Rome, Constantinople, Antioch and Athens were troubled by political and religious violence or by seditions between different factions, Sparta aimed to revive its traditional model of civic order in the new historical context of Late Antiquity.

Determination Ofinterfacial Mechanical Parameters For An Al/Epoxy/Al2O3 System Byusing Peel Test Simulations

Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained. Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.

Evaluación de la comprensión de emociones en niños mediante el Test de Rorschach

El presente estudio plantea como objetivo evaluar la comprensión de emociones en niños, aspecto central del funcionamiento reflexivo, a través del Test de Rorschach. Para lograrlo se seleccionó una muestra de 30 niños a quienes se administró el “Test of Emotion Comprehension” y el Test de Rorschach. Se presentan los resultados obtenidos a partir de la correlación entre los datos arrojados por ambas técnicas, lo cual permitió identificar determinados indicadores Rorschach (determinantes/ contenidos/ localizaciones/ cómputos) que se modifican de acuerdo al nivel de comprensión de emociones del niño y que, por ende, podrían resultar útiles para evaluarlo. Además, dichos resultados muestran que los niños con alto nivel de comprensión de emociones presentan un protocolo Rorschach mucho más rico, de lo cual se deduce la presencia de mayor cantidad de recursos emocionales en este grupo en comparación con los niños de bajo nivel de comprensión de emociones.

Determination of interface properties between micron-thick metal film and ceramic substrate using peel test

Peel test measurements have been performed to estimate both the interface toughness and the separation strength between copper thin film and Al2O3 substrate with film thicknesses ranging between 1 and 15 mu m. An inverse analysis based on the artificial neural network method is adopted to determine the interface parameters. The interface parameters are characterized by the cohesive zone (CZ) model. The results of finite element simulations based on the strain gradient plasticity theory are used to train the artificial neural network. Using both the trained neural network and the experimental measurements for one test result, both the interface toughness and the separation strength are determined. Finally, the finite element predictions adopting the determined interface parameters are performed for the other film thickness cases, and are in agreement with the experimental results.

Evaluación de la eficacia de la técnica de floating system para la producción de radicchio rosso var. di Verona en condiciones controladas

La técnica de producción en Floating system constituye una alternativa económica y veloz de producción en hidroponia. Este sistema permite obtener hojas de vegetales de pequeño tamaño “Baby leaf” listas para consumir (IV Gama), cuyo consumo a nivel mundial muestra una tendencia creciente. Dicha técnica no se encuentra aún muy difundida para la producción de radicchio rosso. El objetivo de este trabajo fue evaluar el efecto del tamaño de celda, del substrato y de la técnica de floating system sobre la producción de radicchio. Los ensayos se realizaron en cámara a 25 ºC con un fotoperíodo de 16 hs de luz y 8 de oscuridad y con una intensidad de luz de 10 000 Lux. Se utilizó un diseño experimental factorial totalmente aleatorizado, con 5 repeticiones y 3 factores, cuyos niveles fueron: 1) Tamaño de celda, (T), con 3 niveles: grande, mediano y pequeño, 2) Técnica de producción, (F), con 2 niveles: floating system y sistema convencional, 3) Sustrato, (S), con 2 niveles: vermiculita y mezcla. Se analizaron las siguientes variables: 1) peso fresco, 2) peso seco, 3) largo de planta, 4) número de hojas y 5) área foliar. Los resultados obtenidos resultan alentadores respecto del empleo de la técnica de floating system. Para la obtención de plántulas con calidad de IV Gama resulta más conveniente el empleo de celdas de 80 cm3 y sustrato mezcla.