Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Tuberous sclerosis complex with oral manifestations: A case report and literature review

Introduction: Tuberous sclerosis complex (TSC) is a neurocutaneous syndrome produced by a number of genetic mutations. The disease is characterized by the development of benign tumors affecting different body systems. The most common oral manifestations of TSC are fibromas, gingival hyperplasia and enamel hypoplasia. Clinical Case: A 35-year-old woman diagnosed with TSC presented with a reactive fibroma of considerable size and rapid growth in the region of the right lower third molar. Discussion: In the present case the association of TSC with dental malpositioning gave rise to a rapidly evolving reactive fibroma of considerable diameter. Few similar cases can be found in the literature. Patients with TSC present mutations of the TSC1 and TSC2 genes, which intervene in cell cycle regulation and are important for avoiding neoplastic processes. No studies have been found associating TSC with an increased risk of oral cancer, though it has been shown that the over-expression of TSC2 could exert an antitumor effect. Careful oral and dental hygiene, together with regular visits to the dentist, are needed for the prevention and early detection of any type of oral lesion. The renal, pulmonary and cardiac alterations often seen in TSC must be taken into account for the correct management of these patients.

Development of a Filter Aid Proportioning, Mixing, and Feeding System for a Polishing Filter

The purpose of this work was to study the characteristics of the most commonly used filter aid materials and their influences on the design of proportioning, mixing, and feeding system for polishing filter family. Based on the literature survey and hands-on experience a system was designed with defined equipment and capital and operating costs. The system was designed to serve precoating and bodyfeeding applications and is easily extended to be used in multiple filter processes. Also a test procedure was carried out where influences of flux and filter cloths to accumulated cake were studied. Filter aid is needed in challenging conditions to improve filtration efficiency and cleaning, and thus extend the operating life of the filter media. Filter aid preparation and feeding system was designed for the use of two different filter aids; precoat and bodyfeed. Precoating is used before the filtration step initiates. If the solids in the filterable solution have a tendency to clog the filter bag easily, precoat is used on the filter bag to obtain better filtration efficiency and quality. Diatomite or perlite is usually used as a precoating substance. The intention is to create a uniform cake to the overall surface of the filter cloth, with predetermined thickness, 2 – 5 mm. This ensures that the clogging of the filter cloth is reduced and the filtration efficiency is increased. Bodyfeed is used if the solids in the filterable solution have a tendency to form a sticky impermeable filter cake. The cake properties are enhanced by maintaining the permeability of the accumulating cake by using the filter aid substance as bodyfeed during the filtration process.

Maxillary dentigerous cyst and supernumerary tooth. Is it a frequent association?

Dentigerous cysts, also known as follicular cysts, are a relatively common pathology in our field. They are associated with unerupted or semi-erupted teeth and are usually not related to supernumerary teeth. OBJECTIVE: To describe a dentigerous cyst case associated to a supernumerary tooth. CASE-REPORT: A large-sized dentigerous cyst is described, associated with a supernumerary tooth, affecting the whole maxillary anterior area. Appropriate treatment consists of performing root canals and a Partsch II procedure with a cystectomy, extracting the unerupted teeth, carrying out an apicoectomy and retro-filling the affected teeth. The defect is filled with a bone xenograft. Possible therapeutic alternatives and the connection between the dentigerous cysts and supernumerary teeth are considered in the discussion.

Teaching mathematics and programming : new approaches with empirical evaluation

Programming and mathematics are core areas of computer science (CS) and consequently also important parts of CS education. Introductory instruction in these two topics is, however, not without problems. Studies show that CS students find programming difficult to learn and that teaching mathematical topics to CS novices is challenging. One reason for the latter is the disconnection between mathematics and programming found in many CS curricula, which results in students not seeing the relevance of the subject for their studies. In addition, reports indicate that students' mathematical capability and maturity levels are dropping. The challenges faced when teaching mathematics and programming at CS departments can also be traced back to gaps in students' prior education. In Finland the high school curriculum does not include CS as a subject; instead, focus is on learning to use the computer and its applications as tools. Similarly, many of the mathematics courses emphasize application of formulas, while logic, formalisms and proofs, which are important in CS, are avoided. Consequently, high school graduates are not well prepared for studies in CS. Motivated by these challenges, the goal of the present work is to describe new approaches to teaching mathematics and programming aimed at addressing these issues: Structured derivations is a logic-based approach to teaching mathematics, where formalisms and justifications are made explicit. The aim is to help students become better at communicating their reasoning using mathematical language and logical notation at the same time as they become more confident with formalisms. The Python programming language was originally designed with education in mind, and has a simple syntax compared to many other popular languages. The aim of using it in instruction is to address algorithms and their implementation in a way that allows focus to be put on learning algorithmic thinking and programming instead of on learning a complex syntax. Invariant based programming is a diagrammatic approach to developing programs that are correct by construction. The approach is based on elementary propositional and predicate logic, and makes explicit the underlying mathematical foundations of programming. The aim is also to show how mathematics in general, and logic in particular, can be used to create better programs.

Experiences in using a structured method in finding and defining new innovations: the strategic options approach

Investment decision-making on far-reaching innovation ideas is one of the key challenges practitioners and academics face in the field of innovation management. However, the management practices and theories strongly rely on evaluation systems that do not fit in well with this setting. These systems and practices normally cannot capture the value of future opportunities under high uncertainty because they ignore the firm’s potential for growth and flexibility. Real options theory and options-based methods have been offered as a solution to facilitate decision-making on highly uncertain investment objects. Much of the uncertainty inherent in these investment objects is attributable to unknown future events. In this setting, real options theory and methods have faced some challenges. First, the theory and its applications have largely been limited to market-priced real assets. Second, the options perspective has not proved as useful as anticipated because the tools it offers are perceived to be too complicated for managerial use. Third, there are challenges related to the type of uncertainty existing real options methods can handle: they are primarily limited to parametric uncertainty. Nevertheless, the theory is considered promising in the context of far-reaching and strategically important innovation ideas. The objective of this dissertation is to clarify the potential of options-based methodology in the identification of innovation opportunities. The constructive research approach gives new insights into the development potential of real options theory under non-parametric and closeto- radical uncertainty. The distinction between real options and strategic options is presented as an explanans for the discovered limitations of the theory. The findings offer managers a new means of assessing future innovation ideas based on the frameworks constructed during the course of the study.

Application of social media and ICT-tools in new and small business ventures.

The current research emphasizes on various questions raised and deliberated upon by different entrepreneurs. It provides a valuable contribution to comprehend the importance of social media and ICT-applications. Furthermore, it demonstrates how to support and implement the management consulting and business coaching start-ups with the help of social media and ICT-tools. The thesis presents a literary review from different information systems science, SME and e-business journals, web articles, as well as, survey analysis reports on social media applications. The methodology incorporated into a qualitative research method in which social anthropological approaches were used to oversee the case study activities in order to collect data. The collaborative social research approach was used to shelter the action research method. The research discovered that new business start-ups, as well as small businesses do not use social media and ICT-tools, unlike most of the large corporations use. At present, the current open-source ICT-technologies and social media applications are equally available for new and small businesses as they are available for larger companies. Successful implementation of social media and ICT-applications can easily enhance start-up performance and overcome business hassles. The thesis sheds some light on effective and innovative implementation of social media and ICT-applications for new business risk takers and small business birds. Key words

Electrocoagulation in the treatment of industrial waters and wastewaters

Chemical coagulation is commonly used in raw water and wastewater treatment plants for the destabilisation of pollutants so that they can be removed in the subsequent separation processes. The most commonly used coagulation chemicals are aluminium and iron metal salts. Electrocoagulation technology has also been proposed for the treatment of raw waters and wastewaters. With this technology, metal cations are produced on the electrodes via electrolysis and these cations form various hydroxides in the water depending on the water pH. In addition to this main reaction, several side reactions, such as hydrogen bubble formation and the reduction of metals on cathodes, also take place in the cell. In this research, the applications of electrocoagulation were investigated in raw water treatment and wastewater applications. The surface water used in this research contained high concentrations of natural organic matter (NOM). The effect of the main parameters – current density, initial pH, electric charge per volume, temperature and electrolysis cell construction – on NOM removal were investigated. In the wastewater treatment studies, the removal of malodorous sulphides and toxic compounds from the wastewaters and debarking effluents were studied. Also, the main parameters of the treatment, such as initial pH and current density, were investigated. Aluminium electrodes were selected for the raw water treatment, whereas wastewaters and debarking effluent were treated with iron electrodes. According to results of this study, aluminium is more suitable electrode material for electrocoagulation applications because it produces Al(III) species. Metal ions and hydroxides produced by iron electrodes are less effective in the destabilisation of pollutants because iron electrodes produce more soluble and less charged Fe(II) species. However, Fe(II) can be effective in some special applications, such as sulphide removal. The resulting metal concentration is the main parameter affecting destabilisation of pollutants. Current density, treatment time, temperature and electrolysis cell construction affect the dissolution of electrodes and hence also the removal of pollutants. However, it seems that these parameters have minimal significance in the destabilization of the pollutants besides this effect (in the studied range of parameters). Initial pH and final pH have an effect on the dissolution of electrodes, but they also define what aluminium or iron species are formed in the solution and have an effect on the ζ-potential of all charged species in the solution. According to the results of this study, destabilisation mechanisms of pollutants by electrocoagulation and chemical coagulation are similar. Optimum DOC removal and low residual aluminium can be obtained simultaneously with electrocoagulation, which may be a significant benefit of electrocoagulation in surface water treatment compared to chemical coagulation. Surface water treatment with electrocoagulation can produce high quality water, which could be used as potable water or fresh water for industrial applications. In wastewater treatment applications, electrocoagulation can be used to precipitate malodorous sulphides to prevent their release into air. Technology seems to be able to remove some toxic pollutants from wastewater and could be used as pretreatment prior to treatment at a biological wastewater treatment plant. However, a thorough economic and ecological comparison of chemical coagulation and electrocoagulation is recommended, because these methods seem to be similar in pollutant destabilisation mechanisms, metal consumption and removal efficiency in most applications.

The Finnish it industries in transition. Defining and Measuring the Finnish Software Product and IT Services Industries by Applying Theoretical Frameworks

The starting point of this study is that the prevailing way to consider the Finnish IT industries and industry information often results in a limited and even skewed picture of the sector. The purpose of the study is to contribute and increase knowledge and understanding of the status, structure and evolution of the Finnish IT industries as well as the Finnish IT vendor field and competition. The focus is on software product and IT services industries which form a crucial part of all ICT industries. This study examines the Finnish IT sector from production (supply) as well as market (demand) perspective. The study is based on empirical information from multiple sources. Three research questions were formulated for the study. The first concerns the status of the Finnish IT industries considered by applying theoretical frameworks. The second research question targets at the basis for the future evolution of the Finnish IT industries and, finally, the third at the ability of the available definitions and indicators to describe the Finnish IT industries and IT markets. Major structural changes like technological changes and related innovations, globalization and new business models are drivers of the evolution of the IT industries. The findings of this study emphasize the significant role of IT services in the Finnish IT sector and in connection to that the ability to combine IT service skills, competences and practices with high level software skills also in the future. According to the study the Finnish IT enterprises and their customers have become increasingly dependent on global ecosystems and platforms, applications and IT services provided by global vendors. As a result, more IT decisions are made outside Finland. In addition, IT companies are facing new competition from other than IT industries bringing into market new substitutes. To respond to the new competition, IT firms seek growth by expanding beyond their traditional markets.. The changing global division of labor accentuates the need for accurate information of the IT sector but, at the same time, also makes it increasingly challenging to acquire the information needed. One of the main contributions of this study is to provide frameworks for describing the Finnish IT sector and its evolution. These frameworks help combine empirical information from various sources and make it easier to concretize the structures, volumes, relationships and interaction of both, the production and market side of the Finnish IT industry. Some frameworks provide tools to analyze the vendor field, competition and the basis for the future evolution of the IT industries. The observations of the study support the argument that static industry definitions and related classifications do not serve the information needs in dynamic industries, such as the IT industries. One of the main messages of this study is to emphasize the importance of understanding the definitions and starting points of different information sources. Simultaneously, in the structure and evolution of Finnish IT industries the number of employees has become a more valid and reliable measure than the revenue based indicators.

Towards combining interactive mobile TV and smart spaces : architectures, tools and application development

Technological developments in microprocessors and ICT landscape have made a shift to a new era where computing power is embedded in numerous small distributed objects and devices in our everyday lives. These small computing devices are ne-tuned to perform a particular task and are increasingly reaching our society at every level. For example, home appliances such as programmable washing machines, microwave ovens etc., employ several sensors to improve performance and convenience. Similarly, cars have on-board computers that use information from many di erent sensors to control things such as fuel injectors, spark plug etc., to perform their tasks e ciently. These individual devices make life easy by helping in taking decisions and removing the burden from their users. All these objects and devices obtain some piece of information about the physical environment. Each of these devices is an island with no proper connectivity and information sharing between each other. Sharing of information between these heterogeneous devices could enable a whole new universe of innovative and intelligent applications. The information sharing between the devices is a diffcult task due to the heterogeneity and interoperability of devices. Smart Space vision is to overcome these issues of heterogeneity and interoperability so that the devices can understand each other and utilize services of each other by information sharing. This enables innovative local mashup applications based on shared data between heterogeneous devices. Smart homes are one such example of Smart Spaces which facilitate to bring the health care system to the patient, by intelligent interconnection of resources and their collective behavior, as opposed to bringing the patient into the health system. In addition, the use of mobile handheld devices has risen at a tremendous rate during the last few years and they have become an essential part of everyday life. Mobile phones o er a wide range of different services to their users including text and multimedia messages, Internet, audio, video, email applications and most recently TV services. The interactive TV provides a variety of applications for the viewers. The combination of interactive TV and the Smart Spaces could give innovative applications that are personalized, context-aware, ubiquitous and intelligent by enabling heterogeneous systems to collaborate each other by sharing information between them. There are many challenges in designing the frameworks and application development tools for rapid and easy development of these applications. The research work presented in this thesis addresses these issues. The original publications presented in the second part of this thesis propose architectures and methodologies for interactive and context-aware applications, and tools for the development of these applications. We demonstrated the suitability of our ontology-driven application development tools and rule basedapproach for the development of dynamic, context-aware ubiquitous iTV applications.

Paper for printed electronics and functionality

Mass-produced paper electronics (large area organic printed electronics on paper-based substrates, “throw-away electronics”) has the potential to introduce the use of flexible electronic applications in everyday life. While paper manufacturing and printing have a long history, they were not developed with electronic applications in mind. Modifications to paper substrates and printing processes are required in order to obtain working electronic devices. This should be done while maintaining the high throughput of conventional printing techniques and the low cost and recyclability of paper. An understanding of the interactions between the functional materials, the printing process and the substrate are required for successful manufacturing of advanced devices on paper. Based on the understanding, a recyclable, multilayer-coated paper-based substrate that combines adequate barrier and printability properties for printed electronics and sensor applications was developed in this work. In this multilayer structure, a thin top-coating consisting of mineral pigments is coated on top of a dispersion-coated barrier layer. The top-coating provides well-controlled sorption properties through controlled thickness and porosity, thus enabling optimizing the printability of functional materials. The penetration of ink solvents and functional materials stops at the barrier layer, which not only improves the performance of the functional material but also eliminates potential fiber swelling and de-bonding that can occur when the solvents are allowed to penetrate into the base paper. The multi-layer coated paper under consideration in the current work consists of a pre-coating and a smoothing layer on which the barrier layer is deposited. Coated fine paper may also be used directly as basepaper, ensuring a smooth base for the barrier layer. The top layer is thin and smooth consisting of mineral pigments such as kaolin, precipitated calcium carbonate, silica or blends of these. All the materials in the coating structure have been chosen in order to maintain the recyclability and sustainability of the substrate. The substrate can be coated in steps, sequentially layer by layer, which requires detailed understanding and tuning of the wetting properties and topography of the barrier layer versus the surface tension of the top-coating. A cost competitive method for industrial scale production is the curtain coating technique allowing extremely thin top-coatings to be applied simultaneously with a closed and sealed barrier layer. The understanding of the interactions between functional materials formulated and applied on paper as inks, makes it possible to create a paper-based substrate that can be used to manufacture printed electronics-based devices and sensors on paper. The multitude of functional materials and their complex interactions make it challenging to draw general conclusions in this topic area. Inevitably, the results become partially specific to the device chosen and the materials needed in its manufacturing. Based on the results, it is clear that for inks based on dissolved or small size functional materials, a barrier layer is beneficial and ensures the functionality of the printed material in a device. The required active barrier life time depends on the solvents or analytes used and their volatility. High aspect ratio mineral pigments, which create tortuous pathways and physical barriers within the barrier layer limit the penetration of solvents used in functional inks. The surface pore volume and pore size can be optimized for a given printing process and ink through a choice of pigment type and coating layer thickness. However, when manufacturing multilayer functional devices, such as transistors, which consist of several printed layers, compromises have to be made. E.g., while a thick and porous top-coating is preferable for printing of source and drain electrodes with a silver particle ink, a thinner and less absorbing surface is required to form a functional semiconducting layer. With the multilayer coating structure concept developed in this work, it was possible to make the paper substrate suitable for printed functionality. The possibility of printing functional devices, such as transistors, sensors and pixels in a roll-to-roll process on paper is demonstrated which may enable introducing paper for use in disposable “onetime use” or “throwaway” electronics and sensors, such as lab-on-strip devices for various analyses, consumer packages equipped with product quality sensors or remote tracking devices.

Implementing an open data system and showing its benefits

Open data refers to publishing data on the web in machine-readable formats for public access. Using open data, innovative applications can be developed to facilitate people‟s lives. In this thesis, based on the open data cases (discussed in the literature review), Open Data Lappeenranta is suggested, which publishes open data related to opening hours of shops and stores in Lappeenranta City. To prove the possibility of creating Open Data Lappeenranta, the implementation of an open data system is presented in this thesis, which publishes specific data related to shops and stores (including their opening hours) on the web in standard format (JSON). The published open data is used to develop web and mobile applications to demonstrate the benefits of open data in practice. Also, the open data system provides manual and automatic interfaces which make it possible for shops and stores to maintain their own data in the system. Finally in this thesis, the completed version of Open Data Lappeenranta is proposed, which publishes open data related to other fields and businesses in Lappeenranta beyond only stores‟ data.

Unidirectional fiber-reinforced composite as an oral implant abutment material: Experimental studies of E-glass fiber/BisGMA-TEGDMA polymer in vitro

Fiber-reinforced composites (FRCs) are a new group of non-metallic biomaterials showing a growing popularity in many dental and medical applications. As an oral implant material, FRC is biocompatible in bone tissue environment. Soft tissue integration to FRC polymer material is unclear. This series of in vitro studies aimed at evaluating unidirectional E-glass FRC polymer in terms of mechanical, chemical, and biological properties in an attempt to develop a new non-metallic oral implant abutment alternative. Two different types of substrates were investigated: (a) Plain polymer (BisGMA 50%–TEGDMA 50%) and (b) Unidirectional FRC. The mechanical behavior of high fiber-density FRCs was assessed using a three-point bending test. Surface characterization was performed using scanning electron and spinning disk confocal microscopes. The surface wettability/energy was determined using sessile drop method. The blood response, including blood-clotting ability and platelet morphology was evaluated. Human gingival fibroblast cell responses - adhesion kinetics, adhesion strength, and proliferation activity - were studied in cell culture environment using routine test conditions. A novel tissue culture method was developed and used to evaluate porcine gingival tissue graft attachment and growth on the experimental composite implants. The analysis of the mechanical properties showed that there is a direct proportionality in the relationship between E-glass fiber volume fraction and toughness, modulus of elasticity, and load bearing capacity; however, flexural strength did not show significant improvement when high fiber-density FRC is used. FRCs showed moderate hydrophilic properties owing to the presence of exposed glass fibers on the polymer surface. Blood-clotting time was shorter on FRC substrates than on plain polymer. The FRC substrates also showed higher platelet activation state than plain polymer substrates. Fibroblast cell adhesion strength and proliferation rate were highly pronounced on FRCs. A tissue culture study revealed that gingival epithelium and connective tissue established an immediate close contact with both plain polymer and FRC implants. However, FRC seemed to guide epithelial migration outwards from the tissue/implant interface. Due to the anisotropic and hydrophilic nature of FRC, it can be concluded that this material enhances biological events related with soft tissue integration on oral implant surface.

EFFECT OF TRINEXAPAC-ETHYL ON GROWTH AND YIELD OF SUGARCANE

ABSTRACT Growth regulators can be used to further retard or inhibit vegetative growth. In this sense, the objective of this study was to determine the effects of age and number of trinexapac-ethyl applications on the growth and yield of sugarcane. The experiment was in a randomized complete block design with four replications. The treatments were in a 3 x 2 + 2 factorial arrangement, where factor A corresponded to the application times of the plant growth regulator (120, 200 and 240 days after bud burst (DAB) of sugarcane) and factor B to the number of applications (one or two applications). In addition, two controls (one with three applications and another application without the regulator) were added. The application of trinexapac-ethyl decreased the number and the distance between buds, height, root volume and sugarcane yield. The sequential application (2 or 3 times) induced an increase in stem diameter and three applications of the product increased the number of plant tillers. The use of growth regulators applied at 240 DAB has reduced plant height, however without changing the number of buds. It can be concluded that trinexapac-ethyl changes sugarcane growth and yield, regardless of season and number of applications.

Employees’ continuous learning and job satisfaction - effects on productivity

In today’s knowledge intense economy the human capital is a source for competitive advantage for organizations. Continuous learning and sharing the knowledge within the organization are important to enhance and utilize this human capital in order to maximize the productivity. The new generation with different views and expectations of work is coming to work life giving its own characteristics on learning and sharing. Work should offer satisfaction so that the new generation employees would commit to organizations. At the same time organizations have to be able to focus on productivity to survive in the competitive market. The objective of this thesis is to construct a theory based framework of productivity, continuous learning and job satisfaction and further examine this framework and its applications in a global organization operating in process industry. Suggestions for future actions are presented for this case organization. The research is a qualitative case study and the empiric material was gathered by personal interviews concluding 15 employee and one supervisor interview. Results showed that more face to face interaction is needed between employees for learning because much of the knowledge of the process is tacit and so difficult to share in other ways. Offering these sharing possibilities can also impact positively to job satisfaction because they will increase the sense of community among employees which was found to be lacking. New employees demand more feedback to improve their learning and confidence. According to the literature continuous learning and job satisfaction have a relative strong relationship on productivity. The employee’s job description in the case organization has moved towards knowledge work due to continuous automation and expansion of the production process. This emphasizes the importance of continuous learning and means that productivity can be seen also from quality perspective. The normal productivity output in the case organization is stable and by focusing on the quality of work by improving continuous learning and job satisfaction the upsets in production can be handled and prevented more effectively. Continuous learning increases also the free human capital input and utilization of it and this can breed output increasing innovations that can increase productivity in long term. Also job satisfaction can increase productivity output in the end because employees will work more efficiently, not doing only the minimum tasks required. Satisfied employees are also found participating more in learning activities.