Biokinetics and dosimetry of 111 In-DOTA-NOC-ATE compared with 111In-DTPA-Octreotide

Aim: Biokinetics and dosimetry of 111In-DOTA-NOC-ATE (NOCATE) and 111In-DTPA-octreotide (Octreoscan?, OCTREO) were comparatively studied in the same patients. Patients and Methods: Seventeen patients (10 males, 7 females), mean age 60 years referred for an Octreoscan? because of carcinoid (N=9), unspecified neurodendocrine tumors (N=6), thymoma (N=1) or medullary thyroid carcinoma (N=1) accepted a second study with NOCATE. Four patients had no detectable tumor at the time of scanning. Whole-body (WB) anterior-posterior scans were recorded 0.5 (100% reference scan), 4, 24 and 48 hrs (N=17) and 120 hrs (N=6) after injection. OCTREO (178±15 MBq) preceded NOCATE (108±14 MBq) imaging with 16±5 days in 16 patients while 1 patient had first NOCATE followed 14 days later by OCTREO. Blood samples were taken 5, 15, 30, 60, 240 and 1440 min after injection. Background corrected geometric mean counts of WB, lung, kidney, liver, spleen and blood counts expressed in % of the initial composite WB and blood counts, respectively were fitted to bi- or single exponential curves and dosimetry was performed for male and female patients using MIRDOSE3.1 and OLINDA/EXM. Results: Initially, WB, lung and kidney activity was similar but retention was significantly higher for NOCATE compared with OCTREO. Liver and spleen uptake of NOCATE was higher from beginning (p<0.001) and remained so over time. Activity in rest of body showed similar α and β half-lives, but the β half-life fraction of NOCATE was much higher than OCTREO (49% vs. 19%, respectively). Blood T1/2β was longer for NOCATE compared with OCTREO (19 vs. 6h). Residence times were similar in male and female patients while they were in both genders higher for NOCATE than OCTREO. Consequently, effective dose (ED) for NOCATE (ED 114 and 134 μSv/MBq for man and women, respectively) exceeded that of OCTREO (ED = 61 and 71 μSv/MBq), the latter results being close to the ICRP-published radiation dose of OCTREO (ED = 54 and 71 µSv/MBq, respectively). Differential activity measurement in blood cells and plasma showed that only a minor fraction of NOCATE and OCTREO (<5 % in the mean) was bound to globular blood components. Conclusions: NOCATE showed higher retention in normal organs and delivered roughly twice the radiation dose of OCTREO. The ED of OCTREO in these patients was similar to ICRP80 report when adopting a bladder voiding interval of 2 hours.

Genometrics as an essential tool for the assembly of whole genome sequences: the example of the chromosome of Bifidobacterium longum NCC2705.

BACKGROUND: Analysis of the first reported complete genome sequence of Bifidobacterium longum NCC2705, an actinobacterium colonizing the gastrointestinal tract, uncovered its proteomic relatedness to Streptomyces coelicolor and Mycobacterium tuberculosis. However, a rapid scrutiny by genometric methods revealed a genome organization totally different from all so far sequenced high-GC Gram-positive chromosomes. RESULTS: Generally, the cumulative GC- and ORF orientation skew curves of prokaryotic genomes consist of two linear segments of opposite slope: the minimum and the maximum of the curves correspond to the origin and the terminus of chromosome replication, respectively. However, analyses of the B. longum NCC2705 chromosome yielded six, instead of two, linear segments, while its dnaA locus, usually associated with the origin of replication, was not located at the minimum of the curves. Furthermore, the coorientation of gene transcription with replication was very low. Comparison with closely related actinobacteria strongly suggested that the chromosome of B. longum was misassembled, and the identification of two pairs of relatively long homologous DNA sequences offers the possibility for an alternative genome assembly proposed here below. By genometric criteria, this configuration displays all of the characters common to bacteria, in particular to related high-GC Gram-positives. In addition, it is compatible with the partially sequenced genome of DJO10A B. longum strain. Recently, a corrected sequence of B. longum NCC2705, with a configuration similar to the one proposed here below, has been deposited in GenBank, confirming our predictions. CONCLUSION: Genometric analyses, in conjunction with standard bioinformatic tools and knowledge of bacterial chromosome architecture, represent fast and straightforward methods for the evaluation of chromosome assembly.

Simultaneous determination of plasma levels of fluvoxamine and of the enantiomers of fluoxetine and norfluoxetine by gas chromatography-mass spectrometry.

A gas chromatographic-mass spectrometric method is presented which allows the simultaneous determination of the plasma concentrations of fluvoxamine and of the enantiomers of fluoxetine and norfluoxetine after derivatization with the chiral reagent, (S)-(-)-N-trifluoroacetylprolyl chloride. No interference was observed from endogenous compounds following the extraction of plasma samples from six different human subjects. The standard curves were linear over a working range of 10 to 750 ng/ml for racemic fluoxetine and norfluoxetine and of 50 to 500 ng/ml for fluvoxamine. Recoveries ranged from 50 to 66% for the three compounds. Intra- and inter-day coefficients of variation ranged from 4 to 10% for fluvoxamine and from 4 to 13% for fluoxetine and norfluoxetine. The limits of quantitation of the method were found to be 2 ng/ml for fluvoxamine and 1 ng/ml for the (R)- and (S)-enantiomers of fluoxetine and norfluoxetine, hence allowing its use for single dose pharmacokinetics. Finally, by using a steeper gradient of temperature, much shorter analysis times are obtained if one is interested in the concentrations of fluvoxamine alone.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Bioclimatic constraints to Andean cat distribution: a modelling application for rare species

AimTo identify the bioclimatic niche of the endangered Andean cat (Leopardus jacobita), one of the rarest and least known felids in the world, by developing a species distribution model.LocationSouth America, High Andes and Patagonian steppe. Peru, Bolivia, Chile, Argentina.MethodsWe used 108 Andean cat records to build the models, and 27 to test them, applying the Maxent algorithm to sets of uncorrelated bioclimatic variables from global databases, including elevation. We based our biogeographical interpretations on the examination of the predicted geographic range, the modelled response curves and latitudinal variations in climatic variables associated with the locality data.ResultsSimple bioclimatic models for Andean cats were highly predictive with only 3-4 explanatory variables. The climatic niche of the species was defined by extreme diurnal variations in temperature, cold minimum and moderate maximum temperatures, and aridity, characteristic not only of the Andean highlands but also of the Patagonian steppe. Argentina had the highest representation of suitable climates, and Chile the lowest. The most favourable conditions were centrally located and spanned across international boundaries. Discontinuities in suitable climatic conditions coincided with three biogeographical barriers associated with climatic or topographic transitions.Main conclusionsSimple bioclimatic models can produce useful predictions of suitable climatic conditions for rare species, including major biogeographical constraints. In our study case, these constraints are also known to affect the distribution of other Andean species and the genetic structure of Andean cat populations. We recommend surveys of areas with suitable climates and no Andean cat records, including the corridor connecting two core populations. The inclusion of landscape variables at finer scales, crucially the distribution of Andean cat prey, would contribute to refine our predictions for conservation applications.

A validated assay for measuring doxorubicin in biological fluids and tissues in an isolated lung perfusion model: matrix effect and heparin interference strongly influence doxorubicin measurements.

Doxorubicin is an antineoplasic agent active against sarcoma pulmonary metastasis, but its clinical use is hampered by its myelotoxicity and its cumulative cardiotoxicity, when administered systemically. This limitation may be circumvented using the isolated lung perfusion (ILP) approach, wherein a therapeutic agent is infused locoregionally after vascular isolation of the lung. The influence of the mode of infusion (anterograde (AG): through the pulmonary artery (PA); retrograde (RG): through the pulmonary vein (PV)) on doxorubicin pharmacokinetics and lung distribution was unknown. Therefore, a simple, rapid and sensitive high-performance liquid chromatography method has been developed to quantify doxorubicin in four different biological matrices (infusion effluent, serum, tissues with low or high levels of doxorubicin). The related compound daunorubicin was used as internal standard (I.S.). Following a single-step protein precipitation of 500 microl samples with 250 microl acetone and 50 microl zinc sulfate 70% aqueous solution, the obtained supernatant was evaporated to dryness at 60 degrees C for exactly 45 min under a stream of nitrogen and the solid residue was solubilized in 200 microl of purified water. A 100 microl-volume was subjected to HPLC analysis onto a Nucleosil 100-5 microm C18 AB column equipped with a guard column (Nucleosil 100-5 microm C(6)H(5) (phenyl) end-capped) using a gradient elution of acetonitrile and 1-heptanesulfonic acid 0.2% pH 4: 15/85 at 0 min-->50/50 at 20 min-->100/0 at 22 min-->15/85 at 24 min-->15/85 at 26 min, delivered at 1 ml/min. The analytes were detected by fluorescence detection with excitation and emission wavelength set at 480 and 550 nm, respectively. The calibration curves were linear over the range of 2-1000 ng/ml for effluent and plasma matrices, and 0.1 microg/g-750 microg/g for tissues matrices. The method is precise with inter-day and intra-day relative standard deviation within 0.5 and 6.7% and accurate with inter-day and intra-day deviations between -5.4 and +7.7%. The in vitro stability in all matrices and in processed samples has been studied at -80 degrees C for 1 month, and at 4 degrees C for 48 h, respectively. During initial studies, heparin used as anticoagulant was found to profoundly influence the measurements of doxorubicin in effluents collected from animals under ILP. Moreover, the strong matrix effect observed with tissues samples indicate that it is mandatory to prepare doxorubicin calibration standard samples in biological matrices which would reflect at best the composition of samples to be analyzed. This method was successfully applied in animal studies for the analysis of effluent, serum and tissue samples collected from pigs and rats undergoing ILP.

Präoperative Azidose und Entwicklung von Säuglingen nach Operation angeborener Herzfehler Preoperative acidosis and infant development following surgery for congenital heart disease.

OBJECTIVE: Prenatal diagnosis has been shown to decrease pre-operative acidosis and might prevent the occurrence of disturbed developmental outcome. The aim of this study is to evaluate parameters for acidosis and their predictive value on developmental outcome in newborns with congenital heart disease. METHODS: A total of 117 patients requiring surgery for structural heart disease in the first 31 days of life were included. Diagnosis was established either pre- or postnatally. Preoperative values of lactate, pH and base excess levels were compared to the occurrence of disturbed developmental outcome, i.e. an underperformance of more than 10% on the P90 of a standardized Dutch developmental scale. Patients were divided into groups according to blood levels of acidosis parameters, using receiver operating characteristics curves to determine cut-off values for pH, base excess and lactate. RESULTS: No significant difference in developmental outcome was found using values for pH or base excess as a cut-off level. Preoperative lactate values exceeding 6.1 mmol/l resulted in a significant increase in impaired development compared to infants with a pre-operative lactate lower than 6.1 mmol/l: 40.9% vs 15.1% in (p=0.03). CONCLUSIONS: Pre-operative lactate values might have a prognostic value on developmental outcome in newborns with congenital heart disease. The limited prognostic value of pH can be explained by the fact that pH can be easily corrected, while lactate better reflects the total oxygen debt experienced by these patients.

Developing a Simple and Rapid Test for Monitoring the Heat Evolution of Concrete Mixtures for Both Laboratory and Field Applications, January 2006

Various test methods exist for measuring heat of cement hydration; however, most current methods require expensive equipment, complex testing procedures, and/or extensive time, thus not being suitable for field application. The objectives of this research are to identify, develop, and evaluate a standard test procedure for characterization and quality control of pavement concrete mixtures using a calorimetry technique. This research project has three phases. Phase I was designed to identify the user needs, including performance requirements and precision and bias limits, and to synthesize existing test methods for monitoring the heat of hydration, including device types, configurations, test procedures, measurements, advantages, disadvantages, applications, and accuracy. Phase II was designed to conduct experimental work to evaluate the calorimetry equipment recommended from the Phase I study and to develop a standard test procedure for using the equipment and interpreting the test results. Phase II also includes the development of models and computer programs for prediction of concrete pavement performance based on the characteristics of heat evolution curves. Phase III was designed to study for further development of a much simpler, inexpensive calorimeter for field concrete. In this report, the results from the Phase I study are presented, the plan for the Phase II study is described, and the recommendations for Phase III study are outlined. Phase I has been completed through three major activities: (1) collecting input and advice from the members of the project Technical Working Group (TWG), (2) conducting a literature survey, and (3) performing trials at the CP Tech Center’s research lab. The research results indicate that in addition to predicting maturity/strength, concrete heat evolution test results can also be used for (1) forecasting concrete setting time, (2) specifying curing period, (3) estimating risk of thermal cracking, (4) assessing pavement sawing/finishing time, (5) characterizing cement features, (6) identifying incompatibility of cementitious materials, (7) verifying concrete mix proportions, and (8) selecting materials and/or mix designs for given environmental conditions. Besides concrete materials and mix proportions, the configuration of the calorimeter device, sample size, mixing procedure, and testing environment (temperature) also have significant influences on features of concrete heat evolution process. The research team has found that although various calorimeter tests have been conducted for assorted purposes and the potential uses of calorimeter tests are clear, there is no consensus on how to utilize the heat evolution curves to characterize concrete materials and how to effectively relate the characteristics of heat evolution curves to concrete pavement performance. The goal of the Phase II study is to close these gaps.

Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão

TEIXEIRA, José João Lopes. Departamento de Engenharia Agrícola, Centro de Ciências Agrárias da Universidade Federal do Ceará, Agosto de 2011. Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão, Cabo Verde. Orientador: José Carlos de Araújo. Examinadores: George Leite Mamede, Pedro Henrique Augusto Medeiros. O Arquipélago de Cabo Verde, situado na costa ocidental africana, sofre influência do deserto de Saara tornando o clima caraterizado por pluviometria muito baixa e distribuída irregularmente no espaço e no tempo. As chuvas são muito concentradas, gerando grandes escoamentos para o mar. O aumento da disponibilidade hídrica requer além da construção e manutenção de infraestrutura de captação e conservação de águas pluviais, uma gestão eficiente destes recursos. Atualmente, constitui um dos eixos estratégicos da política do estado de Cabo Verde, a captação, armazenamento e mobilização de águas superficiais através de construção de barragens. Estudos do comportamento hidrológico e sedimentológico do reservatório e da sua bacia de contribuição constituem premissas básicas para um ótimo dimensionamento, gestão e monitoramento da referida infraestrutura. É neste sentido que o presente estudo objetivou sistematizar informações hidrológicas e sedimentológicas da bacia hidrográfica da Barragem de Poilão (BP) e apresentar proposta operacional de longo prazo. A área de estudo ocupa 28 km² a montante da Bacia Hidrográfica da Ribeira Seca (BHRS) na Ilha de Santiago. A altitude da bacia varia de 99 m, situada na cota da barragem, até 1394 m. Para o estudo, foram utilizados e sistematizados, série pluviométrica de 1973 a 2010, registos de vazão instantânea do período 1984 a 2000 e registos agroclimáticos da área de estudo (1981 a 2004). Para o preenchimento das falhas tanto dos escoamentos como da descarga sólida em suspensão, foi utilizado o método de curva chave. Para estimativa de produção de sedimentos na bacia, aplicou-se a Equação Universal de Perda de Solo (USLE) e a razão de aporte de sedimentos (SDR). O índice de retenção de sedimentos no reservatório foi estimado pelo método de Brune e a distribuição de sedimento pelo método empírico de redução de área descrito por Borland e Miller e, revisado por Lara. Para gerar e simular curvas de vazão versus garantia foi utilizado código computacional VYELAS, desenvolvido por Araújo e baseado na abordagem de Campos. Também foi avaliada a redução da vazão de retirada do período 2006 a 2026, provocado pelo assoreamento do reservatório. Concluiu-se que em média a precipitação anual é de 323 mm, concentrando-se 73% nos meses de agosto e setembro; a bacia de contribuição apresenta como valor um número de curva (CN) de 76, com abstração inicial (Ia) de 26 mm, coeficiente de escoamento de 19% e uma vazão anual afluente de 1,7 hm³(cv= 0,73); a disponibilidade hídrica para uma garantia de 85% é avaliada em 0,548 hm³/ano e não 0,671 hm³/ano como indica o projeto original. Com uma descarga sólida estimada em 22.185 m³/ano conclui-se que até o ano de 2026, a capacidade do reservatório reduz a uma taxa de 1,8 % ao ano, devido ao assoreamento, provocando uma redução de 41% da disponibilidade hídrica inicial. Nessa altura, as perdas por evaporação e sangria serão da ordem de 81% da vazão afluente de entrada no reservatório. Na base desses resultados se apresentou proposta de operação da BP.

Secondary Accident Data Fusion for Assessing Long-Term Performance of Transportation Systems, 2007

Secondary accident statistics can be useful for studying the impact of traffic incident management strategies. An easy-to-implement methodology is presented for classifying secondary accidents using data fusion of a police accident database with intranet incident reports. A current method for classifying secondary accidents uses a static threshold that represents the spatial and temporal region of influence of the primary accident, such as two miles and one hour. An accident is considered secondary if it occurs upstream from the primary accident and is within the duration and queue of the primary accident. However, using the static threshold may result in both false positives and negatives because accident queues are constantly varying. The methodology presented in this report seeks to improve upon this existing method by making the threshold dynamic. An incident progression curve is used to mark the end of the queue throughout the entire incident. Four steps in the development of incident progression curves are described. Step one is the processing of intranet incident reports. Step two is the filling in of incomplete incident reports. Step three is the nonlinear regression of incident progression curves. Step four is the merging of individual incident progression curves into one master curve. To illustrate this methodology, 5,514 accidents from Missouri freeways were analyzed. The results show that secondary accidents identified by dynamic versus static thresholds can differ by more than 30%.

Impact of High Crop Prices on Environmental Quality: A Case of Iowa and the Conservation Reserve Program, 2007

Growing demand for corn due to the expansion of ethanol has increased concerns that environmentally sensitive lands retired from agricultural production into the Conservation Reserve Program (CRP) will be cropped again. Iowa produces more ethanol than any other state in the United States, and it also produces the most corn. Thus, an examination of the impacts of higher crop prices on CRP land in Iowa can give insight into what we might expect nationally in the years ahead if crop prices remain high. We construct CRP land supply curves for various corn prices and then estimate the environmental impacts of cropping CRP land through the Environmental Policy Integrated Climate (EPIC) model. EPIC provides edge-of-field estimates of soil erosion, nutrient loss, and carbon sequestration. We find that incremental impacts increase dramatically as higher corn prices bring into production more and more environmentally fragile land. Maintaining current levels of environmental quality will require substantially higher spending levels. Even allowing for the cost savings that would accrue as CRP land leaves the program, a change in targeting strategies will likely be required to ensure that the most sensitive land does not leave the program.

Growth arrest-specific gene 6 » (Gas6) as an intra-hospital mortality predictor for patients in septic shock

Aim: Gas6 is known to be elevated in sepsis, correlating with the severity of infection and¦organ failure. We aimed to investigate the performance of Gas6 plasma levels at¦admission to predict the risk of mortality in a cohort of septic patients.¦Methods: We used prospectively collected data and plasma samples from the "Sepsis¦Cohorte Romande". Gas6 level was measured by ELISA at admission and expressed in¦percentage relative to its level in a pool of normal plasma.¦Results: Non-survivors (n=21) presented higher Gas6 levels than survivors (n=73) (median¦258% vs 164%, IQR 194 and 117 respectively) (p=0.0027). Gas6 correlated positively with¦different cytokines and was the best mortality predictor, as shown by the ROC curves area.¦In patients with septic shock (n=66), using 249% as a cut-off value, Gas6 measurement¦had a specificity of 67% and a sensitivity of 81% for predicting mortality. ROC curve area¦was 0.75. Positive and negative predictive values were 57% and 87%, respectively.¦Conclusion: Thus, Gas6 plasma level at admission might be a useful tool to predict¦mortality in patients with septic shock. Although Gas6 hold promise as an early sepsis¦marker, its precise implication in sepsis remains to be elucidated. Our observation should¦be further investigated in larger prospective clinical trials.

BIOMOD - a platform for ensemble forecasting of species distributions

BIOMOD is a computer platform for ensemble forecasting of species distributions, enabling the treatment of a range of methodological uncertainties in models and the examination of species-environment relationships. BIOMOD includes the ability to model species distributions with several techniques, test models with a wide range of approaches, project species distributions into different environmental conditions (e.g. climate or land use change scenarios) and dispersal functions. It allows assessing species temporal turnover, plot species response curves, and test the strength of species interactions with predictor variables. BIOMOD is implemented in R and is a freeware, open source, package

Insulin-like growth factor I (IGF I) stimulates DNA synthesis in fetal rat brain cell cultures.

Addition of insulin, IGF I or IGF II to serum-free cultures of fetal rat brain cells (gestation day 15/16) significantly stimulates DNA synthesis. The dose-response curves show that IGF I is more potent than insulin; half maximal stimulation of [3H]thymidine incorporation is obtained at about 0.4 nM IGF I and 14 nM insulin, respectively. Cultures initiated 2 days later (gestation day 17/18) showed a decreased responsiveness to both peptides. No additive effect was observed after combined addition of both peptides at near-maximal doses. Both peptides show a latency of action of about 12-18 h. In the presence of either IGF or insulin, neuronal as well as glial enzymes are increased, suggesting that neuronal and glial precursor cell division is influenced. IGF I and IGF II interact with a specific binding site for which insulin competes very weakly; however IGF I and IGF II bind with relatively high affinity to the insulin specific binding site. The present results support the hypothesis that both insulin and IGF stimulate mitotic activity by interacting with specific somatomedin receptors and suggest a physiological role of IGF in the developing brain.

Improving generalized regression analysis for the spatial prediction of forest communities

Aim This study used data from temperate forest communities to assess: (1) five different stepwise selection methods with generalized additive models, (2) the effect of weighting absences to ensure a prevalence of 0.5, (3) the effect of limiting absences beyond the environmental envelope defined by presences, (4) four different methods for incorporating spatial autocorrelation, and (5) the effect of integrating an interaction factor defined by a regression tree on the residuals of an initial environmental model. Location State of Vaud, western Switzerland. Methods Generalized additive models (GAMs) were fitted using the grasp package (generalized regression analysis and spatial predictions, http://www.cscf.ch/grasp). Results Model selection based on cross-validation appeared to be the best compromise between model stability and performance (parsimony) among the five methods tested. Weighting absences returned models that perform better than models fitted with the original sample prevalence. This appeared to be mainly due to the impact of very low prevalence values on evaluation statistics. Removing zeroes beyond the range of presences on main environmental gradients changed the set of selected predictors, and potentially their response curve shape. Moreover, removing zeroes slightly improved model performance and stability when compared with the baseline model on the same data set. Incorporating a spatial trend predictor improved model performance and stability significantly. Even better models were obtained when including local spatial autocorrelation. A novel approach to include interactions proved to be an efficient way to account for interactions between all predictors at once. Main conclusions Models and spatial predictions of 18 forest communities were significantly improved by using either: (1) cross-validation as a model selection method, (2) weighted absences, (3) limited absences, (4) predictors accounting for spatial autocorrelation, or (5) a factor variable accounting for interactions between all predictors. The final choice of model strategy should depend on the nature of the available data and the specific study aims. Statistical evaluation is useful in searching for the best modelling practice. However, one should not neglect to consider the shapes and interpretability of response curves, as well as the resulting spatial predictions in the final assessment.