Automated static image analysis as a novel tool in describing the physical properties of dietary fiber

Abstract The growing interest in the usage of dietary fiber in food has caused the need to provide precise tools for describing its physical properties. This research examined two dietary fibers from oats and beets, respectively, in variable particle sizes. The application of automated static image analysis for describing the hydration properties and particle size distribution of dietary fiber was analyzed. Conventional tests for water holding capacity (WHC) were conducted. The particles were measured at two points: dry and after water soaking. The most significant water holding capacity (7.00 g water/g solid) was achieved by the smaller sized oat fiber. Conversely, the water holding capacity was highest (4.20 g water/g solid) in larger sized beet fiber. There was evidence for water absorption increasing with a decrease in particle size in regards to the same fiber source. Very strong correlations were drawn between particle shape parameters, such as fiber length, straightness, width and hydration properties measured conventionally. The regression analysis provided the opportunity to estimate whether the automated static image analysis method could be an efficient tool in describing the hydration properties of dietary fiber. The application of the method was validated using mathematical model which was verified in comparison to conventional WHC measurement results.

Construction of a supercritical fluid extraction (SFE) equipment: validation using annatto and fennel and extract analysis by thin layer chromatography coupled to image

Abstract The present work describes setting up a laboratory unit for supercritical fluid extraction. In addition to its construction, a survey of cost was done to compare the cost of the homemade unit with that of commercial units. The equipment was validated using an extraction of annatto seeds’ oil, and the extraction and fractionation of fennel oil were used to validate the two separators; for both systems, the solvent was carbon dioxide. The chemical profiles of annatto and fennel extracts were assessed using thin layer chromatography; the images of the chromatographic plates were processed using the free ImageJ software. The cost survey showed that the homemade equipment has a very low cost (~US$ 16,000) compared to commercial equipment. The extraction curves of annatto were similar to those obtained in the literature (yield of 3.8% oil). The separators were validated, producing both a 2.5% fraction of fennel seed extract rich in essential oils and another extract fraction composed mainly of oleoresins. The ImageJ software proved to be a low-cost tool for obtaining an initial evaluation of the chemical profile of the extracts.

Logistics Cost Optimization of Road Freight Shipments in a Consumer Goods Company

In the industry of the case company, transportation and warehousing costs account for more than 10% of the total cost which is more than on average. A Finnish company has an understanding that by sending larger shipments in parcels, they could save tens of thousands of euros annually in freight costs in Finland’s domestic shipments. To achieve these savings and optimize total logistics cost, company’s interest is to find out which is the cost efficient way of shipping road shipments of certain volumes; in parcel boxes or on pallets, and what should be the split volume determining the shipment type. Distribution center (DC) costs affect this decision and therefore they need to be also evaluated to determine the total logistics cost savings. Main results were achieved by executing activity-based costing-calculations including DC and road freight costs to determine the ideal split volume with which the total logistics cost is optimal. Calculations were done for Finland’s DC, separately for two main road freight destinations, Finland and Sweden, which cover 50% of road shipment spend. Data for calculations was collected both manually and automatically from various internal and external sources, such as the company ERP system and logistics service providers’ (LSP) reporting. DC processes were studied in practice and compared to model processes. Currently used freight rates were compared to existing pricing models and freight service tendering process was evaluated by participating in the process and comparing it to the models based on literature. The results show that the potential savings are not as significant as the company hoped for, mainly because of packing work increasing DC labor cost. Annual savings by setting ideal split volume per country would account for 0,4 % of the warehousing and transportation costs of shipments in scope of this thesis. Split volume should be set separately for each route, mainly because the pricing model for road freight is different in each country. For some routes bigger parcels should be sent but for some routes pallets should be used more. Next step is to do these calculations for remaining routes to determine total savings potential. Other findings show that the processes in the DC are designed well and the company could achieve savings by executing tenders more efficiently. Company should also pay more attention to parcel pricing and packing the shipments accordingly.

Automated system of seedling image analysis (SVIS) and electrical conductivity to assess sun hemp seed vigor

The development of new procedures for quickly obtaining accurate information on the physiological potential of seed lots is essential for developing quality control programs for the seed industry. In this study, the effectiveness of an automated system of seedling image analysis (Seed Vigor Imaging System - SVIS) in determining the physiological potential of sun hemp seeds and its relationship with electrical conductivity tests, were evaluated. SVIS evaluations were performed three and four days after sowing and data on the vigor index and the length and uniformity of seedling growth were collected. The electrical conductivity test was made on 50 seed replicates placed in containers with 75 mL of deionised water at 25 ºC and readings were taken after 1, 2, 4, 8 and 16 hours of imbibition. Electrical conductivity measurements at 4 or 8 hours and the use of the SVIS on 3-day old seedlings can effectively detect differences in vigor between different sun hemp seed lots.

Le Livre et l'image : revue documentaire illustrée mensuelle / directeur littéraire J. Grand-Carteret ; directeur-gérant Émile Rondeau

1894/01/10 (A2,T3,N11)-1894/06/10 (A2,T3,N16).

Le Livre et l'image : revue documentaire illustrée mensuelle / directeur littéraire J. Grand-Carteret ; directeur-gérant Émile Rondeau

1893/08 (T2)-1893/12.

Le Livre et l'image : revue documentaire illustrée mensuelle / directeur littéraire J. Grand-Carteret ; directeur-gérant Émile Rondeau

Variante(s) de titre : Le Livre & l'image

Le Livre et l'image : revue documentaire illustrée mensuelle / directeur littéraire J. Grand-Carteret ; directeur-gérant Émile Rondeau

1910/04 (N2)-1910/07.

Le Livre et l'image : revue documentaire illustrée mensuelle / directeur littéraire J. Grand-Carteret ; directeur-gérant Émile Rondeau

1893/03 (T1)-1893/07.

Boulevard to broken dreams, Part 1: the Polonoroeste road project in the Brazilian Amazon, and the World Bank's environmental and indigenous peoples' norms

ABSTRACT Before the mid 1980s the World Bank conceived "nature" as something to be "conquered" and "environment" as a source of resources for "development". By the late 1980s the Bank incorporated norms of environmental sustainability and indigenous peoples' protection into its mandate, and other development-oriented IOs followed. This two-part paper describes how a fight over the Polonoroeste road project in the Brazilian Amazon - inside the Bank, between the Bank and NGOs supported by the US Congress, and between the Bank and the government of Brazil -helped to generate the far-reaching change of policy norms. The first part describes how the project was designed as an innovation in sustainable development in rainforests; and how it provoked a firestorm inside the Bank as it moved towards project approval.

Formation of the Employer Brand Image

The purpose of this study was to explore the employer brand image and its formation of a Finnish (yet international) service company in B2B sector. In the research qualitative case study method was used to explore the most preferred attributes in employer attraction, the employer brand perceptions towards the case company, and the effectors behind these brand perceptions among the prospective group of employees. The research was conducted through in-depth semistructured interviews among 23-30 undergraduate or graduate business students in Finnish universities close to their graduation. After deriving the attributes of an attractive employer, and exploring their relation to the case company, the employer brand image of the case company was determined and its attractiveness level evaluated. Moreover, the formation of the employer brand image was investigated and its sources detected. The most important factors for the target group in employer attractiveness were found to be company reputation and company culture/work atmosphere. Also career opportunities and international opportunities were seen important. The case company was found to hold a positive, attractive image on company culture and international opportunities, but failing to hold a good reputation as a fair employer. The main and most impactful source of employer brand image was former and current employees - directly or indirectly. Company’s own actions played only small part in employer brand formation as credibility is a critical factor in brand image formation and corporate communication found not to be perceived genuine. Based on the findings, suggestions for further employer branding were made.