985 resultados para Religious Party. Communicational Processes. Symbolic Languages
Resumo:
As primary objective, this thesis examines Finnair Technical Procurement’s service quality with its underlying process. As an internal unit, Technical Procurement serves as a link between external suppliers and internal customers. It is argued that external service quality requires a certain quality level within an organization. At the same time, aircraft maintenance business is subject to economic restraints. Therefore, a methodology was developed with a modified House of Quality that assists management in analyzing and evaluating Technical Procurement’s service level and connected process steps. It could be shown that qualitative and quantitative objectives do not exclude each other per se.
Resumo:
Specific combustion programs (Gaseq, Chemical equilibria in perfect gases, Chris Morley) are used to model dioxin and formation in the incineration processes of urban solid wastes. Thanks to these programs, it is possible to establish correlations with the formation mechanisms postulated in literature on the subject. It was found that minimum oxygen quantities are required to obtain a significant formation of these compounds and that more furans than dioxins are formed. Likewise, dioxin and furan formation is related to the presence of carbon monoxide, and dioxin and furan distribution among its different compounds depends on the chlorine and hydrogen relative composition. This is due to the fact that an increased chlorine availability leads to the formation of compounds bearing a higher chlorine concentration (penta-, hexa-, hepta-, and octachlorides), whereas an increased hydrogen availability leads to the formation of compounds bearing a lower chlorine number (mono, di-, tri-, and tetrachlorides).
Resumo:
Adpositions with the stems ala, ylä and pää in the language of Mikael Agricola’s writings The language of Mikael Agricola’s (c 1510–1557) writings represents an interesting phase in the development of the Finnish system for adpositions. In the Finnish language, the older Uralic system of postpositions has undergone expansion and a new system of prepositions has been adopted. On the other hand, the adposition system found in Agricola’s writings has also been strongly affected by foreign models, because Agricola’s texts are mainly translations of religious texts, which by and large use a word-for-word translation strategy. In the thesis, I explore Agricola’s use of adpositions; more specifically, which adpositions carry the meaning of ‘being under’ or ‘being over’ something, and in what other functions these adpositions are used. My main focus is on the semantics of the adpositions. I also study the syntactic features of adpositions and adposition structures; these are intertwined with semantics, since the meaning of adpositions is established in the adposition clause. Finally, I compare Agricola’s use of adpositions to the corresponding adpositions of present-day Finnish. Adpositions with stems ala, ylä and pää form an interesting subject for research. Their frequency in the data, however, is highly uneven. The overwhelming majority of the adpositions studied in the thesis are päälle; there are only two occurrences of adpositions with the stem ylä. Adpositions typically denote a location ‘under’ or ‘above’ something. Almost half of the adpositions, however, can be classified as semantically unmotivated and as representing a foreign model in terms of the Finnish language; they do not occur in present-day Finnish. In Agricola’s texts they act in more grammatical roles than the corresponding adpositions of present-day Finnish. In the thesis, the corresponding adpositions in the source languages are carefully analysed. All other uses of the adpositions are marginal in relation to spatial ones and those based on foreign models. The original meanings of the adpositions have not changed much since Agricola, but adpositions considered to originate from foreign models have been intentionally eliminated in presentday standard Finnish. It is also noteworthy that the system of adpositions with the stems ala, ylä and pää has changed since Agricola. His texts include the adposition ala, which corresponds to the modern adposition alle. Likewise the adposition yllä is absent in Agricola, as are the internal locative cases of the adposition pää.
Resumo:
Den rikt utformade och komplexa hinduiska traditionen har hittills huvudsakligen tecknats av manliga forskare och det är främst manliga religiösa strävanden som har dokumenterats. Detta förhållande och de patriarkala synsätt som styr många auktoritativa heliga texter har bidragit till att skapa intrycket att hinduiska kvinnors religiösa erfarenheter antingen saknas eller är avsevärt begränsade. Denna studie lyfter fram det faktum att ett ökande antal indiska kvinnor inom dagens hinduism axlar publika roller som religiösa ledare. Med sitt framträdande utmanar många av dessa rådande sociala uppfattningar om kvinnors underordnade ställning och främjar därmed en förnyad medvetenhet av urgamla föreställningar om Gud som kvinna. Avhandlingen utforskar fenomenet kvinnliga guruer genom att belysa sjuttio guruers andliga karriär, med särskild fokus på fyra av dem. Några av de frågor som behandlas är följande: På vilket sätt är kvinnliga guruer del av den hinduiska traditionen? Vilka förväntningar ställs på dem? Hur legitimeras deras auktoritet som guruer? Hur handskas guruerna med sina dubbla roller som kvinnor och andliga ledare? Hur återspeglas gudinnans ställning, som i indisk religiositet ofta är central, i kvinnors faktiska verklighet? Bidrar kvinnliga guruer med sitt religiösa engagemang till att nyskapa och förändra den indiska religiösa diskursen och utövningen av religion?
Resumo:
Populärkulturen har i dagens läge kommit att utgöra en allt mer viktig och central inspirationskälla för allt fler människors konstruktion av den egna religiösa identiteten även inom traditionella och institutionella kristna sammanhang. Denna avhandling belyser denna utveckling i ljuset av den finländska kristna metallmusik-kulturen - en sällsynt stark sammanblanding av protestantisk kristendom och en utpräglad och kontroversiell populärmusikform och dess kultur. Fokus riktas framför allt på hur den kristna metallmusik-kulturen blir meningsfull för sina medlemmar genom de sätt på vilka den konstrueras diskursivt, dvs. genom de sätt på vilka den representeras och talas om bland sina egna anhängare. Den diskursiva konstruktionen av den kristna metallmusik-kulturen utforskas på ett såväl bredare transnationellt som ett finländskt nationellt plan. Studien redogör även för den kristna metalmusikens och -kulturens huvudsakliga verbala, visuella och estetiska kännetecken. Uppbyggnaden och spridningen av dagens transnationella kristna metallmusik-kultur undersöks även i ljuset av det teoretiska konceptet scene. Avhandlingens centrala argument är att den kristna metallmusikscenen erbjuder sina medlemmar en mängd resurser för skapandet av ett alternativt och komplementärt religiöst uttrycksätt, religiös praxis och en alternativ kristen identitet.
Resumo:
Aktörer inom telekommunikationsbranschen i Finland har genomgått en intensiv förändring under de senaste 25 åren, från 1980-talets självständiga företag till företag beroende av varandra, och även av aktörer inom närliggande branscher. I dag skapas telekommunikationsmarknaden inte endast av operatörerna, utan också av mediebolag (t.ex. MTV Media) och IT-företag (t.ex. TietoEnator). Gränserna mellan olika industrier håller därmed på att suddas ut - ett fenomen som allmänt benämns som teknologisk konvergens. Konvergens innebär att någonting integreras; det kan handla om t.ex. teknologier (telefoni och Internet), företag (AOL och Time Warner), industrier (telekom, media och IT-branscherna), tjänster (mobilt TV), produkter (PDA) osv. Detta innebär att ytterst få telekomaktörer ensamma kan vidareutveckla marknaden och tekniska lösningar. Samarbete mellan aktörer krävs; mobiltelefontillverkare, innehållsproducenter, operatörer osv. bör intesifiera sitt samarbete för att kunna erbjuda attraktiva tjänster och produkter till kunder och slutanvändare. Avhandlingen fokuserar speciellt på affärsnätverk och samarbetsmönster mellan nätverksaktörer som medel för att få tillgång till resurser som krävs i en konvergenskarakteriserad affärsomgivning. Avhandlingen lyfter fram vad den teknologiska konvergensen har inneburit för telekomaktörer, dvs. att företag tvingats förändra sina strategier och verksamhetsmodeller. För många företag i branschen har anpassningen till konvergenstänkande varit utmanande, och i vissa fall kan man till och med tala om att företagen upplevt en identitetskris. Den utförda forskningen visar att konvergens uppfattas på marknaden som en pågående förändringsprocess, där varje telekomaktör är tvungen att utvärdera sin roll och position i relation till andra aktörer inom branschen. Konvergensprocesser forsätter i framtiden med ökad intensitet. Aktörerna skapar medvetet sin omgivning genom att agera i olika roller, som kan sträcka sig över industrigränser. Avhandlingen påvisar även att externa händelser och industrikontexten påverkar dynamiken i ett affärsnätverk.
Resumo:
Military conscription and peacetime military service were the subjects of heated political, social and cultural controversies during the early years of national independence in Finland. Both the critics and the supporters of the existing military system described it as strongly formative of young men’s physical and moral development into adult men and male citizens. The conflicts over conscription prompted the contemporaries to express their notions about what Finnish men were like, at their best and at their worst, and what should and could be done about it. This thesis studies military conscription as an arena for the “making of manhood” in peacetime Finnish society, 1918–1939. It examines a range of public images of conscripted soldiering, asking how soldiering was depicted and given gendered meanings in parliamentary debates, war hero myths, texts concerned with the military and civic education of conscripts, as well as in works of fiction and reminiscences about military training as a personal experience. Studying conscription with a focus on masculinity, the thesis explores the different cultural images of manliness, soldiering and male citizenship on offer in Finnish society. It investigates how political parties, officers, educators, journalists, writers and “ordinary” conscripts used and developed, embraced or rejected these notions, according to their political purposes or personal needs. The period between the two world wars can be described as a fast-forward into military modernity in Finland. In the process, European middle class gender ideologies clashed with Finnish agrarian masculinities. Nationalistic agendas for the militarisation of Finnish manhood stumbled against intense class conflicts and ideological resistance. Military propaganda used images of military heroism, civic virtue and individual success to persuade the conscripts into ways of thinking and acting that were shaped by bourgeois mentality, nationalistic ideology and religious morality. These images are further analysed as expressive of the personal experiences and emotions of their middle-aged, male authors. The efforts of these military educators were, however, actively resisted on many fronts, ranging from rural working class masculinities among the conscripted young men to ideological critiques of the standing army system in parliament. In narratives about military training, masculinity was depicted as both strengthened and contradicted by the harsh and even brutal practices of interwar Finnish military training. The study represents a combination of new military history and the historical study of men and masculinities. It approaches masculinity as a contested and highly political form of social and cultural knowledge that is actively and selectively used by historic actors. Instead of trying to identify a dominant or “hegemonic” form of masculinity within a pre-determined theoretical structure, this study examines how the meanings ascribed to manhood varied according to class, age, political ideology and social situation. The interwar period in Finland can be understood as a period of contest between different notions of militarised masculinity, yet to judge by the materials studied, there was no clear winning party in that contest. A gradual movement from an atmosphere of conflict surrounding conscription towards political and cultural compromises can be discerned, yet this convergence was incomplete and many division lines remained.
Resumo:
Metal industries producing thick sections have shown increasing interest in the laser–arc hybrid welding process because of its clear advantages compared with the individual processes of autogenous laser welding and arc welding. One major benefit of laser–arc hybrid welding is that joints with larger gaps can be welded with acceptable quality compared to autogenous laser welding. The laser-arc hybrid welding process has good potential to extend the field of applications of laser technology, and provide significant improvements in weld quality and process efficiency in manufacturing applications. The objective of this research is to present a parameter set-up for laser–arc hybrid welding processes, introduce a methodical comparison of the chosen parameters, and discuss how this technology may be adopted in industrial applications. The research describes the principles, means and applications of different types of laser–arc hybrid welding processes. Conducted experiment processing variables are presented and compared using an analytical model which can also be used for predictive simulations. The main argument in this thesis is that profound understanding of the advanced technology of laser-arc hybrid welding will help improve the productivity of welding in industrial applications. Based on a review of the current knowledge base, important areas for further research are also identified. This thesis consists of two parts. The first part introduces the research topic and discusses laser–arc hybrid welding by characterizing its mechanism and most important variables. The second part comprises four research papers elaborating on the performance of laser– arc hybrid welding in the joining of metals. The study uses quantitative and qualitative research methods which include in-depth, interpretive analyses of results from a number of research groups. In the interpretive analysis, the emphasis is placed on the relevance and usefulness of the investigative results drawn from other research publications. The results of this study contribute to research on laser–arc hybrid welding by increasing understanding of how old and new perspectives on laser–arc hybrid welding are evidenced in industry. The research methodology applied permits continued exploration of how laser–arc hybrid welding and various process factors influence the overall quality of the weld. Thestudy provides a good foundation for future research, creates improved awareness of the laser–arc hybrid welding process, and assists the metal industry to maximize welding productivity.
Resumo:
Cultural heritage has become something of an in-word in recent times. Intangible cultural heritage, however, is a category that has received relatively little attention. This folkloristic study focuses on intangible cultural heritage as concept and as process. Folkloristics as a scholarly branch emphasizes non-material culture. Consequently, there is a big potential in bringing existing knowledge of folklore together with current scholarly theories concerning cultural heritage in order to expand the understanding of intangible cultural heritage. In this thesis cultural heritage is regarded as a symbolic construct, which is spoken of and discussed in specific ways. The study of intangible cultural heritage (Swe. kulturarv) as concept focuses on this area. For a cultural component to be experienced as intangible cultural heritage it is, however, not enough to discuss it in those terms. Instead, cultural heritage status needs to be acted out during lengthy processes. This is demonstrated by the study of intangible cultural heritage as process. As a consequence performativity appears crucial to an understanding of cultural heritage – when a sufficient number of people speak and act as if a cultural component has a special status, it will also be perceived as cultural heritage. In this dissertation intangible cultural heritage is studied through cultural analysis, more specifically through discourse analysis. The usage of the concept intangible cultural heritage within cultural organizations, in scholarly use and in the Swedish-speaking press in Finland is examined. Traditional music in the Swedish-speaking districts of Finland is used as a case study of intangible cultural heritage as process. The examination concerns how traditional music, an intangible cultural component, has been discussed, transformed, standardized and objectified in a cultural heritage process. Cultural heritage is generally used as a token of value so that certain cultural components, both intangible and tangible, which are discussed in terms of cultural heritage are perceived to be valuable and should therefore be safeguarded. Intangible cultural heritage depends on performance, that is practitioners use their bodies to act out their traditional knowledge through song, handicraft, storytelling and so on. Intangible cultural components can be transmitted to other individuals in a performance situation, and they can also be documented. In Finland documentation and subsequent filing in archives have been associated with safeguarding of intangible cultural heritage. If the aim of safeguarding is to uphold traditional practices, which is the case for among others UNESCO’s programs aimed at intangible cultural heritage, other efforts are called for: forms of safeguarding that support performance and transmission.
Resumo:
Tämä Diplomityö keskittyy tutkimaan pilvisovelluskehitystä Google App Engine – pilvisovellusalustalle perustuen kuusi –vaiheiseen vesiputousmalliin sekä tutkimaan Google App Engine -pilvisovellusalustan tarjoamia mahdollisuuksia ja rajoituksia sovelluskehityksen muodossa. Tutkimuksen perusteella kuusi –vaiheinen vesiputousmalli soveltuu pilvisovelluskehitykseen,mikäli vaatimusmäärittely on tarkka jo sovelluskehityksen alkuvaiheessa. Tutkimuksen tuloksena syntyi vaatimusmäärittely MikkoMail –pilvisovellukselle. Vaatimusmäärittelyn pohjalta luotiin MikkoMail –pilvisovellus Google App Engine –pilvisovellusalustalle. Google App Engine –pilvisovellusalusta tukee vain Python- ja Java –ohjelmointikieliä eikä sisällä lainkaan ulkoista tietokantapalveluiden tukea. Tästä syystä Google App Engine -pilvisovellusalusta soveltuu pieniin, keskisuuriin ja pilottiprojektinomaisiin sovelluskehitysprojekteihin.
Resumo:
The use of domain-specific languages (DSLs) has been proposed as an approach to cost-e ectively develop families of software systems in a restricted application domain. Domain-specific languages in combination with the accumulated knowledge and experience of previous implementations, can in turn be used to generate new applications with unique sets of requirements. For this reason, DSLs are considered to be an important approach for software reuse. However, the toolset supporting a particular domain-specific language is also domain-specific and is per definition not reusable. Therefore, creating and maintaining a DSL requires additional resources that could be even larger than the savings associated with using them. As a solution, di erent tool frameworks have been proposed to simplify and reduce the cost of developments of DSLs. Developers of tool support for DSLs need to instantiate, customize or configure the framework for a particular DSL. There are di erent approaches for this. An approach is to use an application programming interface (API) and to extend the basic framework using an imperative programming language. An example of a tools which is based on this approach is Eclipse GEF. Another approach is to configure the framework using declarative languages that are independent of the underlying framework implementation. We believe this second approach can bring important benefits as this brings focus to specifying what should the tool be like instead of writing a program specifying how the tool achieves this functionality. In this thesis we explore this second approach. We use graph transformation as the basic approach to customize a domain-specific modeling (DSM) tool framework. The contributions of this thesis includes a comparison of di erent approaches for defining, representing and interchanging software modeling languages and models and a tool architecture for an open domain-specific modeling framework that e ciently integrates several model transformation components and visual editors. We also present several specific algorithms and tool components for DSM framework. These include an approach for graph query based on region operators and the star operator and an approach for reconciling models and diagrams after executing model transformation programs. We exemplify our approach with two case studies MICAS and EFCO. In these studies we show how our experimental modeling tool framework has been used to define tool environments for domain-specific languages.
Resumo:
The aim of this study was to create a Balanced Scorecard to the DigiCup solution. The first goal was to create process descriptions to the few critical processes. The second goal was to define appropriate measurements, according to customer survey as well as following the Balanced Scorecard process description, to manage the critical success factors. The overall goal of this study was to create a performance measurement system for the solution which guides the operation towards continuous improvement. This study was conducted by using both qualitative and quantitative methods, and the analysis was done by using a case study method. The material was gathered from the current customers, the management and the employees using structured, semi-structured and open group and individual interviews. The current customers were divided into retailers and direct customers of the DigiCup solution. The questions which the customers were asked were related to the information about interviewee, company, business strategy, market, satisfaction survey and future requirements. The management defined the strategy and took part in specifying the perspectives, objectives and measurements to the Balanced Scorecard of the DigiCup solution. The employees participated into the choosing of the metrics. The material consisted from altogether sixteen interviews. At the beginning of the study the product development, the order-delivery as well as the printing processes was chosen to be the critical processes of the DigiCup solution. These processes were concentrated on already in the literature review while trying to find the characteristics of these processes as well as the critical success factors and the appropriate measurements, which could be utilized when creating the Balanced Scorecard to the DigiCup solution according to the customer survey. The appropriate perspectives, objectives and measurements were found to the DigiCup solution. The chosen measures works as a basis for the development of IT-reporting tool. As a conclusion it can be stated that when discussing a new business, where the objectives are changing according to which development’s phases the company is in, the measurement should be updated often enough.
Resumo:
Kirjallisuusarvostelu
Resumo:
The potential for enhancing the energy efficiency of industrial pumping processes is estimated to be in some cases up to 50 %. One way to define further this potential is to implement techniques in accordance to definition of best available techniques in pumping applications. These techniques are divided into three main categories: Design, control method & maintenance and distribution system. In the theory part of this thesis first the definition of best available techniques (BAT) and its applicability on pumping processes is issued. Next, the theory around pumping with different pump types is handled, the main stress being in centrifugal pumps. Other components needed in a pumping process are dealt by presenting different control methods, use of an electric motor, variable speed drive and the distribution system. Last part of the theory is about industrial pumping processes from water distribution, sewage water and power plant applications, some of which are used further on in the empirical part as example cases. For the empirical part of this study four case studies on typical pumping processes from older Master’s these were selected. Firstly the original results were analyzed by studying the distribution of energy consumption between different system components and using the definition of BAT in pumping, possible ways to improve energy efficiency were evaluated. The goal in this study was that by the achieved results it would be possible to identify the characteristic energy consumption of these and similar pumping processes. Through this data it would then be easier to focus energy efficiency actions where they might be the most applicable, both technically and economically.
Resumo:
The consumption of manganese is increasing, but huge amounts of manganese still end up in waste in hydrometallurgical processes. The recovery of manganese from multi-metal solutions at low concentrations may not be economical. In addition, poor iron control typically prevents the production of high purity manganese. Separation of iron from manganese can be done with chemical precipitation or solvent extraction methods. Combined carbonate precipitation with air oxidation is a feasible method to separate iron and manganese due to the fast kinetics, good controllability and economical reagents. In addition the leaching of manganese carbonate is easier and less acid consuming than that of hydroxide or sulfide precipitates. Selective iron removal with great efficiency from MnSO4 solution is achieved by combined oxygen or air oxidation and CaCO3 precipitation at pH > 5.8 and at a redox potential of > 200 mV. In order to avoid gypsum formation, soda ash should be used instead of limestone. In such case, however, extra attention needs to be paid on the reagents mole ratios in order to avoid manganese coprecipitation. After iron removal, pure MnSO4 solution was obtained by solvent extraction using organophosphorus reagents, di-(2-ethylhexyl)phosphoric acid (D2EHPA) and bis(2,4,4- trimethylpentyl)phosphinic acid (CYANEX 272). The Mn/Ca and Mn/Mg selectivities can be increased by decreasing the temperature from the commonly used temperatures (40 –60oC) to 5oC. The extraction order of D2EHPA (Ca before Mn) at low temperature remains unchanged but the lowering of temperature causes an increase in viscosity and slower phase separation. Of these regents, CYANEX 272 is selective for Mn over Ca and, therefore, it would be the better choice if there is Ca present in solution. A three-stage Mn extraction followed by a two-stage scrubbing and two-stage sulfuric acid stripping is an effective method of producing a very pure MnSO4 intermediate solution for further processing. From the intermediate MnSO4 some special Mn- products for ion exchange applications were synthesized and studied. Three types of octahedrally coordinated manganese oxide materials as an alternative final product for manganese were chosen for synthesis: layer structured Nabirnessite, tunnel structured Mg-todorokite and K-kryptomelane. As an alternative source of pure MnSO4 intermediate, kryptomelane was synthesized by using a synthetic hydrometallurgical tailings. The results show that the studied OMS materials adsorb selectively Cu, Ni, Cd and K in the presence of Ca and Mg. It was also found that the exchange rates were reasonably high due to the small particle dimensions. Materials are stable in the studied conditions and their maximum Cu uptake capacity was 1.3 mmol/g. Competitive uptake of metals and acid was studied using equilibrium, batch kinetic and fixed-bed measurements. The experimental data was correlated with a dynamic model, which also accounts for the dissolution of the framework manganese. Manganese oxide micro-crystals were also bound onto silica to prepare a composite material having a particle size large enough to be used in column separation experiments. The MnOx/SiO2 ratio was found to affect significantly the properties of the composite. The higher the ratio, the lower is the specific surface area, the pore volume and the pore size. On the other hand, higher amount of silica binder gives composites better mechanical properties. Birnesite and todorokite can be aggregated successfully with colloidal silica at pH 4 and with MnO2/SiO2 weight ratio of 0.7. The best gelation and drying temperature was 110oC and sufficiently strong composites were obtained by additional heat-treatment at 250oC for 2 h. The results show that silica–supported MnO2 materials can be utilized to separate copper from nickel and cadmium. The behavior of the composites can be explained reasonably well with the presented model and the parameters estimated from the data of the unsupported oxides. The metal uptake capacities of the prepared materials were quite small. For example, the final copper loading was 0.14 mmol/gMnO2. According to the results the special MnO2 materials are potential for a specific environmental application to uptake harmful metal ions.