Measuring conduct and cost parameters in the Spanish air transport market

This paper estimates a model of airline competition for the Spanish air transport market. I test the explanatory power of alternative oligopoly models with capacity constraints. In addition, I analyse the degree of density economies. Results show that Spanish airlines conduct follows a price-leadership scheme so that it is less competitive than the Cournot solution. I also find evidence that thin routes can be considered as natural monopolies

A first-principles analysis of the magnetism of CuII polynuclear coordination complexes: the case of [Cu4(bpy)4(aspartate)2(H2O)3](ClO4)4·2.5H2O

The magnetic structure of the [Cu4(bpy)4(aspartate)2(H2O)3](ClO4)4·2.5 H2Ocrystal - using fractional coordinates determined at room-temperature ¿ has beenanalysed in detail. This analysis has been carried out by extending our first principlesbottom-up theoretical approach, which was initially designed to study through-spacemagnetic interactions, to handle through-bond magnetic interactions. The only input datarequired by this approach are the values of the computed JAB exchange parameters for allthe unique pairs of spin-containing centres. The results allow the magnetic structure ofthe crystal, which presents two types of isolated tetranuclear CuII clusters, to be definedin quantitative terms. Each of these clusters presents ferro and antiferromagneticinteractions, the former being stronger, although outnumbered by the latter. Thecomputed magnetic susceptibility curve shows the same qualitative features as theexperimental data. However, there are small differences that are presumed to beassociated with the use of room-temperature crystal coordinates.

Digital holographic microscopy: a noninvasive contrast imaging technique allowing quantitative visualization of living cells with subwavelength axial accuracy.

We have developed a digital holographic microscope (DHM), in a transmission mode, especially dedicated to the quantitative visualization of phase objects such as living cells. The method is based on an original numerical algorithm presented in detail elsewhere [Cuche et al., Appl. Opt. 38, 6994 (1999)]. DHM images of living cells in culture are shown for what is to our knowledge the first time. They represent the distribution of the optical path length over the cell, which has been measured with subwavelength accuracy. These DHM images are compared with those obtained by use of the widely used phase contrast and Nomarski differential interference contrast techniques.

Ab Initio study of magnetic interactions in the KCuF3 and K2CuF4 low-dimensional Systems

The ab initio cluster model approach has been used to study the electronic structure and magnetic coupling of KCuF3 and K2CuF4 in their various ordered polytype crystal forms. Due to a cooperative Jahn-Teller distortion these systems exhibit strong anisotropies. In particular, the magnetic properties strongly differ from those of isomorphic compounds. Hence, KCuF3 is a quasi-one-dimensional (1D) nearest neighbor Heisenberg antiferromagnet whereas K2CuF4 is the only ferromagnet among the K2MF4 series of compounds (M=Mn, Fe, Co, Ni, and Cu) behaving all as quasi-2D nearest neighbor Heisenberg systems. Different ab initio techniques are used to explore the magnetic coupling in these systems. All methods, including unrestricted Hartree-Fock, are able to explain the magnetic ordering. However, quantitative agreement with experiment is reached only when using a state-of-the-art configuration interaction approach. Finally, an analysis of the dependence of the magnetic coupling constant with respect to distortion parameters is presented.

The role of dynamical polarization of the ligand-to-metal charge transfer excitations in the ab initio determination of effective exchange parameters

The role of the bridging ligand on the effective Heisenberg coupling parameters is analyzed in detail. This analysis strongly suggests that the ligand-to-metal charge transfer excitations are responsible for a large part of the final value of the magnetic coupling constant. This permits us to suggest a variant of the difference dedicated configuration interaction (DDCI) method, presently one of the most accurate and reliable for the evaluation of magnetic effective interactions. This method treats the bridging ligand orbitals mediating the interaction at the same level than the magnetic orbitals and preserves the high quality of the DDCI results while being much less computationally demanding. The numerical accuracy of the new approach is illustrated on various systems with one or two magnetic electrons per magnetic center. The fact that accurate results can be obtained using a rather reduced configuration interaction space opens the possibility to study more complex systems with many magnetic centers and/or many electrons per center.

A first-principles analysis of the magnetism of CuII polynuclear coordination complexes: the case of [Cu4(bpy)4(aspartate)2(H2O)3](ClO4)4·2.5H2O

The magnetic structure of the [Cu4(bpy)4(aspartate)2(H2O)3](ClO4)4·2.5 H2Ocrystal - using fractional coordinates determined at room-temperature ¿ has beenanalysed in detail. This analysis has been carried out by extending our first principlesbottom-up theoretical approach, which was initially designed to study through-spacemagnetic interactions, to handle through-bond magnetic interactions. The only input datarequired by this approach are the values of the computed JAB exchange parameters for allthe unique pairs of spin-containing centres. The results allow the magnetic structure ofthe crystal, which presents two types of isolated tetranuclear CuII clusters, to be definedin quantitative terms. Each of these clusters presents ferro and antiferromagneticinteractions, the former being stronger, although outnumbered by the latter. Thecomputed magnetic susceptibility curve shows the same qualitative features as theexperimental data. However, there are small differences that are presumed to beassociated with the use of room-temperature crystal coordinates.

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0>10-3 for O3 probe) and slow acid-base reactions (?0<10-4 for N(CH3)3 probe) on the particle surface. [Authors]

Cell morphology and intracellular ionic homeostasis explored with a multimodal approach combining epifluorescence and digital holographic microscopy.

The authors have developed a live-cell multimodality microscope combining epifluorescence with digital holographic microscopy; it has been implemented with a decoupling procedure allowing to separately measure from the quantitative phase important cell parameters including absolute volume, shape and integral intracellular refractive index. In combination with the numerous different specific fluorescent cellular probes, this multimodality microscopy can address important issues in cell biology. This is demonstrated by the study of intracellular calcium homeostasis associated with the change in cell volume, which play a critical role in the excitotoxicity-induced neuronal death.

Qualitative and quantitative analysis of thalamo-cortical axons in the somatosensory cortex of normal and barrelless mice

Résumé Les rongeurs utilisent leurs moustaches (vibrisses) pour explorer le milieu environnant. Chaque moustache est mue par un système des muscles. Les récepteurs situés à sa base transmettent les informations au système nerveux central. La transmission vers l'écorce se fait via trois neurones de relais qui se trouvent au niveau du ganglion trigéminé, du tronc cérébral et du thalamus. La représentation corticale d'une vibrisse est une concentration des axones thalamo-corticaux (ATC) autour desquelles s'organisent leurs cibles, les cellules de la couche IV. La structure peut être identifiée histologiquement en coupes tangentielles et porte le nom de « barrel » (« tonneau »). Cette correspondance vibrisse - barrel fait de ce système un model idéal pour étudier l'influence de l'activité périphérique sur l'établissement et le maintien des cartes somatotopiques. Notre laboratoire dispose d'une souche de souris qui a subi une mutation spontanée pour le gène codant l'adenylyl cyclase I (ACI). Cette enzyme membranaire catalyse la formation de l'AMPc et joue un rôle important dans le guidage axonal, la libération des neurotransmetteurs et l'intégration des signaux postsynaptiques. Nous avons démontré dans un premier temps que cette souris adulte ne développe pas de barrels. Cela est dû à un manque d'organisation des ATC et aussi des cellules de la couche IV. De plus, les résultats électrophysiologiques montrent que les informations venant des vibrisses adjacentes ne sont pas intégrées d'une manière normale. Dans ce travail de thèse, j'ai analysé la morphologie des ATC révélés individuellement avec de la biocytine. L'analyse quantitative des ATC a mis en évidence les points suivants: 1. Les axones de la souris normale (NOR) quittent le thalamus, traversent la capsule interne et la substance blanche sous-corticale et pénètrent dans le cortex somato-sensoriel primaire. A l'intérieur de l'écorce ils traversent au maximum 3 colonnes corticales adjacentes dont une contient le barrel cible. En passant à travers les couches VI et V, ces axones arborisent et convergent progressivement vers le barrel dans lequel ils forment une riche arborisation. Un petit nombre des branches « errantes », pleines de boutons synaptiques, pénètrent dans les barrels voisins. Deux axones NOR provenant de corps cellulaires très proches dans le thalamus peuvent avoir un cheminement très divergent lors de la traversée de la capsule interne et de la substance blanche sous-corticale mais, à leur entrée dans le cortex, ils sont distants d'au maximum 2 colonnes corticales de la colonne qui contient le barrel cible et ils convergent progressivement vers ce barrel. 2. Les axones de la souris mutante (BRL) ont le même trajet sous-cortical que les axones NOR, mais leur entrée dans le cortex somato-sensoriel primaire est aléatoire. A l'interface entre la substance blanche sous-corticale et le cortex, l'axone principal se divise rapidement en troncs axonaux qui traversent les couches VI et V d'une manière divergente pour arriver dans la couche IV. Cela contraste beaucoup avec la trajectoire des NOR qui convergent graduellement vers leur barrel cible. Le nombre de branches radiales que les axones BRL utilisent pour entrer dans le cortex et dans la couche IV est double par rapport aux axones NOR. Parmi ces branches, seules quelques-unes donnent des arborisations, les autres ne sont pas développées et leur morphologie est semblable à celle des branches formées par les axones de la souris normale lors du développement. Deux axones BRL issus de corps cellulaires proches dans le thalamus peuvent avoir une trajectoire très divergente jusqu'à leur entrée dans la couche IV, mais à ce niveau ils sont réorientés pour se retrouver et faire un nombre maximal de branches et boutons synaptiques dans la même région corticale. Dans un cas extrême, un des axones observés est entré dans le cortex à la limite entre l'aire somatosensorielle primaire et secondaire et a parcouru une distance de 2 mm pour retrouver son partenaire thalamique et donner avec celui-ci un nombre maximal de branches dans la même région de la couche IV. 3. Les mesures quantitatives ont montré que les arborisations corticales des axones NOR ont une longueur moyenne de 18mm et sont formées par 200 segments qui portent 1200 boutons synaptiques. Par rapport à la souris NOR, les axones BRL ont en moyenne la même longueur, le même nombre de segments et boutons synaptiques, mais donnent deux fois plus de branches radiales. La surface tangentielle occupée par les arborisations BRL dans la couche IV est 2 fois plus grande que celle des NOR. Cela signifie que les 1000 boutons synaptiques qui caractérisent les arborisations NOR et BRL dans la couche IV sont disséminés sur une surface tangentielle double chez les derniers, et donc que la densité des boutons par unité de surface corticale est en moyenne plus faible. En effet, l'augmentation de la surface corticale tangentielle des BRL est due aux surfaces de faible et moyenne densité synaptique (0 - 8 boutons / 400pn2) qui augmentent 2 fois tandis que les surfaces de haute densité synaptiques (8 - 64 boutons / 4001.tm2) sont les mêmes. Nous émettons l'hypothèse selon laquelle, durant le développement, les ATC de la souris BRL divergent et forment un nombre exubérant de branches. Grâce à cette divergence et aux branches supranuméraires, ils trouvent l'endroit de l'écorce où se trouvent leurs voisins thalamiques et arborisent abondamment dans cette région. Cependant, le déficit en AGI ne leurs permet pas par la suite, sous influence de l'activité périphérique, de retirer les branches qui se trouvent dans les endroits inappropriés de l'écorce, avec de possibles conséquences sur la discrimination tactile.

Temperature-dependent turnovers in sex-determination mechanisms: a quantitative model.

Sex determination is often seen as a dichotomous process: individual sex is assumed to be determined either by genetic (genotypic sex determination, GSD) or by environmental factors (environmental sex determination, ESD), most often temperature (temperature sex determination, TSD). We endorse an alternative view, which sees GSD and TSD as the ends of a continuum. Both effects interact a priori, because temperature can affect gene expression at any step along the sex-determination cascade. We propose to define sex-determination systems at the population- (rather than individual) level, via the proportion of variance in phenotypic sex stemming from genetic versus environmental factors, and we formalize this concept in a quantitative-genetics framework. Sex is seen as a threshold trait underlain by a liability factor, and reaction norms allow modeling interactions between genotypic and temperature effects (seen as the necessary consequences of thermodynamic constraints on the underlying physiological processes). As this formalization shows, temperature changes (due to e.g., climatic changes or range expansions) are expected to provoke turnovers in sex-determination mechanisms, by inducing large-scale sex reversal and thereby sex-ratio selection for alternative sex-determining genes. The frequency of turnovers and prevalence of homomorphic sex chromosomes in cold-blooded vertebrates might thus directly relate to the temperature dependence in sex-determination mechanisms.

Expression quantitative trait locus mapping across water availability environments reveals contrasting associations with genomic features in Arabidopsis.

The regulation of gene expression is crucial for an organism's development and response to stress, and an understanding of the evolution of gene expression is of fundamental importance to basic and applied biology. To improve this understanding, we conducted expression quantitative trait locus (eQTL) mapping in the Tsu-1 (Tsushima, Japan) × Kas-1 (Kashmir, India) recombinant inbred line population of Arabidopsis thaliana across soil drying treatments. We then used genome resequencing data to evaluate whether genomic features (promoter polymorphism, recombination rate, gene length, and gene density) are associated with genes responding to the environment (E) or with genes with genetic variation (G) in gene expression in the form of eQTLs. We identified thousands of genes that responded to soil drying and hundreds of main-effect eQTLs. However, we identified very few statistically significant eQTLs that interacted with the soil drying treatment (GxE eQTL). Analysis of genome resequencing data revealed associations of several genomic features with G and E genes. In general, E genes had lower promoter diversity and local recombination rates. By contrast, genes with eQTLs (G) had significantly greater promoter diversity and were located in genomic regions with higher recombination. These results suggest that genomic architecture may play an important a role in the evolution of gene expression.

Low-dose valganciclovir is efficacious and safe for prophylaxis of cytomegalovirus infection in kidney transplantation

Background: Optimal valganciclovir (VGC) dosage and duration for cytomegalovirus (CMV) prophylaxis in kidney transplant recipients remains controversial. This study aimed to determine GCV blood levels and efficacy/safety observed under low-dose oral VGC in kidney transplant recipients. Secondly, to quantify the variability of GCV blood levels, and its potential clinical impact. Methods: In this prospective study, each patient at risk for CMV undergoing kidney transplantation received low-dose VGC (450 mg qd) prophylaxis for 3 months, unless GFR was below 40 mL/min, in which case the dose was adapted to 450 mg every other day. GCV levels, at trough (Ctrough) and at peak (C3h) were measured monthly and CMV viremia was assessed during and after prophylaxis using real time quantitative Polymerase Chain Reaction. Adverse effects were recorded on each GCV sampling. Patients were followed up to one year after transplantation. Results: 38 kidney recipients (19 D+/R+, 11 D+/R-, 8 D-/R+) received 3-month VGC prophylaxis. Most patients (mean GFR of 59 mL/min) received 450 mg qd but the dose was reduced to 450 mg every other day in 6 patients with mean GFR of 22 mL/min. Average GCV C3h and Ctrough (regressed at 24h or 48h) were 3.9 mg/L (CV 33%, range: 1.3-8.2) and 0.4 mg/L (CV 111%, range 0.1-3.3). Population pharmacokinetic analysis showed a fair dispersion of the parameters mainly influenced by renal function. Despite this variability, patients remained aviremic during VGC prophylaxis. Neutropenia and thrombocytopenia (grade 2-4) were reported in 4% and 3% of patients respectively. During follow-up, asymptomatic CMV viremia was reported in 25% patients. One year after transplantation, 12% patients (all D+/R-) had developed a CMV disease, which was treated with a therapeutic 6-week course of oral VGC. Conclusion: Average GCV blood levels after oral administration of low-dose VGC in kidney transplant recipients were comparable to those previously reported with oral GCV prophylaxis, efficacious and well tolerated. Thus, a 3-month course of low-dose VGC is appropriate for the renal function of most kidney transplant recipients.

Using spatially distributed parameters and multi-response objective functions to solve parameterization of complex applications of semi-distributed hydrological models

Application of semi-distributed hydrological models to large, heterogeneous watersheds deals with several problems. On one hand, the spatial and temporal variability in catchment features should be adequately represented in the model parameterization, while maintaining the model complexity in an acceptable level to take advantage of state-of-the-art calibration techniques. On the other hand, model complexity enhances uncertainty in adjusted model parameter values, therefore increasing uncertainty in the water routing across the watershed. This is critical for water quality applications, where not only streamflow, but also a reliable estimation of the surface versus subsurface contributions to the runoff is needed. In this study, we show how a regularized inversion procedure combined with a multiobjective function calibration strategy successfully solves the parameterization of a complex application of a water quality-oriented hydrological model. The final value of several optimized parameters showed significant and consistentdifferences across geological and landscape features. Although the number of optimized parameters was significantly increased by the spatial and temporal discretization of adjustable parameters, the uncertainty in water routing results remained at reasonable values. In addition, a stepwise numerical analysis showed that the effects on calibration performance due to inclusion of different data types in the objective function could be inextricably linked. Thus caution should be taken when adding or removing data from an aggregated objective function.