Out-of-plane behavior of masonry infill walls

In order to investigate the out-of-plane behaviour of masonry infill walls, quasi-static testing was performed on a masonry infill walls built inside a reinforced concrete frame by means of an airbag system to apply the uniform out-of-plane load to each component of the infill. The main advantage of this testing setup is that the out-of-plane loading can be applied more uniformly in the walls, contrarily to point load configuration. The test was performed under displacement control by selecting the mid-point of the infill as control point. Input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. The effect of the distance between the reaction frame of the airbag and the masonry infill on the effective contact area was previously analysed. Four load cells were attached to the reaction frame to measure the out-of-plane force. The effective contact area of the airbag was calculated by dividing the load measured in load cells by the pressure inside the airbag. When the distance between the reaction walls and the masonry infill wall is smaller, the effective area is closer to the nominal area of the airbag. Deformation and crack patterns of the infill confirm the formation of arching mechanism and two-way bending of the masonry infill. Until collapse of the horizontal interface between infill and upper beam in RC frame, the infill bends in two directions but the failure of that interface which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam results in the crack opening trough a well-defined path and the consequent collapse of the infill.

Emergência de plântulas de tucumã (Astrocaryum aculeatum) em função da posição de semeadura

O trabalho avaliou a influência da posição da semente no substrato sobre a emergência de plântulas de tucumã (Astrocaryum aculeatum). Após extração e embebição, as sementes foram semeadas obedecendo as seguintes posições: a) 0º - poro germinativo voltado para cima, formando um ângulo de 0º em relação a um eixo imaginário perpendicular ao nível do substrato; b) 45º - poro germinativo inclinado, formando um ângulo de 45º em relação ao eixo imaginário; c) 90º - poro germinativo voltado para o lado, formando um ângulo de 90º em relação ao eixo imaginário. As sementes da posição de 90º apresentaram superioridade na emergência, com 45% de plântulas no estádio "emissão da segunda bainha" e apenas 35% de sementes dormentes, após 270 dias de observação. A emergência é influenciada pela posição de semeadura, sendo que o aumento da profundidade do poro germinativo no substrato proporcionou o aumento da emergência e a diminuição da porcentagem de sementes que permaneceram dormentes.

Avaliação da gramatura de cola na propriedade de flexão estática em painéis compensados de Copaifera duckei Dwayer e Eperua oleifera Ducke

A presente pesquisa teve como objetivo analisar as seguintes gramaturas de cola: 270; 330; 364 e 390 g.m-² a partir da produção de compensados fenólicos utilizando duas espécies florestais; Copaifera duckei e Eperua oleifera e avaliar a flexão estática dos painéis. A madeira foi proveniente da área de manejo florestal sustentado da Indústria de Madeira Compensada localizada em Manicoré, município do Amazonas. As lâminas foram produzidas na Gethal Amazonas S.A - Indústria de Madeira Compensada em Itacoatiara - AM com espessura de 2,2 mm. Foram produzidas a nível industrial 40 painéis, 20 por espécie no total de 8 tratamentos. O experimento foi completamente casualizado com arranjo fatorial. Foi utilizado a norma Européia EN 310: 1993. Os valores de densidade básica da espécie Copaifera duckei foi de 0,60 (g.cm-²) e 0,62 (g.cm-²) para Eperua oleifera. No ensaio de flexão estática, sentido paralelo à grã, somente a espécie Copaifera duckei apresentou diferença significativa a 5% pelo Teste de Dunnette para as propriedades de MOE e MOR. No sentido perpendicular a grã, as espécies Copaifera duckei e Eperua oleifera tanto o MOE quanto o MOR apresentaram diferenças significativas a 5% de probabilidade.

Induced magnetoelectric effect driven by magnetization in BaFe12O19 -/P(VDF-TrFE) composites

Films of BaFe12O19/P(VDF-TrFE) composites with 5, 10 and 20 %wt Barium ferrite content have been fabricated. BaFe12O19 microparticles have the shape of thin hexagonal platelets, the easy direction of magnetization remaining along the c axis, which is perpendicular to the plates. This fact allows for ferrite particles orientation in-plane and out-of-plane within the composite films, as confirmed by measured hysteresis loops. While the in-plane induced magnetoelectric effect (ME) is practically zero, these composite films show a good out-of-plane magnetoelectric effect. with maximum ME coupling coefficient changes of 3, 17 and 2 mV/cm.Oe for the 5, 10 and 20%wt Barium ferrite content films, respectively. We infer that this ME behavior appears as driven by the magnetization process arising when we applied the external magnetic field. We have also measured linear and reversible magnetoelectric effect for low applied bias field, when magnetization process is still reversible.

Seismic retrofit of masonry-to-timber connections in historical constructions

Tese de Doutoramento em Engenharia Civil.

Development of ductile cementitiuos composites using carbon nanotubes

Concrete is the primary construction material for civil infrastructures and generally consists of cement, coarse aggregates, sand, admixtures and water. Cementitious materials are characterized by quasi-brittle behaviour and susceptible to cracking [1]. The cracking process within concrete begins with isolated nano-cracks, which then conjoin to form micro-cracks and in turn macro-cracks. Formation and growth of cracks lead to loss of mechanical performance with time and also make concrete accessible to water and other degrading agents such as CO2, chlorides, sulfates, etc. leading to strength loss and corrosion of steel rebars. To improve brittleness of concrete, reinforcements such as polymeric as well as glass and carbon fibers have been used and microfibers improved the mechanical properties significantly by delaying (but could not stop) the transformation of micro-cracks into macro forms [2]. This fact encouraged the use of nano-sized fillers in concrete to prevent the growth of nano-cracks transforming in to micro and macro forms. Nanoparticles like SiO2, Fe2O3, and TiO2 led to considerable improvement in mechanical performance and moreover, nano-TiO2 helped to remove organic pollutants from concrete surfaces [3].

Terahertz response of patterned epitaxial graphene

We study the interaction between polarized terahertz (THz) radiation and micro-structured large-area graphene in transmission geometry. In order to efficiently couple the radiation into the two-dimensional material, a lateral periodic patterning of a closed graphene sheet by intercalation doping into stripes is chosen. We observe unequal transmittance of the radiation polarized parallel and perpendicular to the stripes. The relative contrast, partly enhanced by Fabry-Perot oscillations reaches 20 %. The effect even increases up to 50 % when removing graphene stripes in analogy to a wire grid polarizer. The polarization dependence is analyzed in a large frequency range from < 80 GHz to 3 THz, including the plasmon-polariton resonance. The results are in excellent agreement with theoretical calculations based on the electronic energy spectrum of graphene and the electrodynamics of the patterned structure

Predictors of dropout in a controlled clinical trial of psychotherapy for moderate depression

A significant number of psychotherapy clients remain untreated, and dropping out is one of the main reasons. Still, the literature around this subject is incoherent. The present study explores potential pre-treatment predictors of dropout in a sample of clients who took part in a clinical trial designed to test the efficacy of narrative therapy for major depressive disorder compared to cognitive-behavioral therapy. Logistic regression analysis showed that: (1) treatment assignment did not predict dropout, (2) clients taking psychiatric medication at intake were 80% less likely to drop out from therapy, compared to clients who were not taking medication, and (3) clients presenting anxious comorbidity at intake were 82% less likely to dropout compared to those clients not presenting anxious comorbidity. Results suggest that clinicians should pay attention to depressed clients who are not taking psychiatric medication or have no comorbid anxiety. More research is needed in order to understand this relationship.

Artificial nest predation rates vary depending on visibility in the eastern Brazilian Amazon

Observational and experimental studies have shown that increased concealment of bird nests reduces nest predation rates. The objective of the present study was to evaluate differences in predation rates between two experimental manipulations of artificial ground nests (i.e., clearing an area around the artificial nest or leaving it as natural as possible), and test whether environmental variables also affected nest predation in an undisturbed area of Amazonian forest in eastern Brazil. A generalized linear model was used to examine the influence of five variables (manipulation type, perpendicular distance from the main trail, total basal area of trees surrounding the nest site, understorey density, and liana quantity) on nest predation rates. Model results, showed that manipulation type was the only variable that significantly affected nest predation rates. Thus, to avoid systematic biases, the influence of nest site manipulation must be taken into consideration when conducting experiments with artificial nests.

Reforço de ligações tradicionais de madeira

Dissertação de mestrado integrado em Engenharia Civil

Basic constraints between two vectors

This chapter deals with the characterization of the basic constraints between two vectors. This issue plays a crucial role in the formulation of constraint equations for mechanical joints. In particular, relations between two parallel and two perpendicular vectors are derived. Moreover, formulation for a vector that connects two generic points is presented. The material described here is developed under the framework of multibody systems formulation for spatial systems.

Synthesis and biological evaluation of mono and bis-naphthalimide derivatives against SH-SY5Y, human brain cancer cells

Dissertação de mestrado em Medicinal Chemistry

Fathers’ emotional involvement with the neonate: impact of the umbilical cord cutting experience

Aims. This paper is a report on a study analysing the effect of the umbilical cord cutting experience on fathers’ emotional involvement with their infants. Background. Participation in childbirth offers an opportunity for father and mother to share the childbirth experience, so it is vital that midwives improve the fathers’ participation in this event. Design. A quasi-experimental study with a quantitative methodology was implemented. Methods. One hundred and five fathers were recruited as part of a convenience sample in a Maternity Public Hospital in a Metropolitan City in Portugal, between January and May of 2008. The Bonding Scale, the Portuguese version of the ‘Mother-to-Infant Bonding Scale’ was used to evaluate the fathers’ emotional involvement with the neonate at different moments: before childbirth, first day after childbirth and first month after childbirth. After childbirth, the fathers were divided into three separate groups depending on their umbilical cord cutting experience. Results. The results demonstrate that the emotional involvement between father and child tends to increase during the first days after childbirth and to decrease when evaluated 1 month after birth, for fathers who did not cut the umbilical cord. However, fathers who cut the umbilical cord demonstrate an improvement in emotional involvement 1 month later. Conclusion. Results suggest that the umbilical cord cutting experience benefits the father’s emotional involvement with the neonate, supporting the benefits of his participation and empowerment in childbirth.

Initial Energy for External Electrical Cardioversion of Atrial Fibrillation

OBJECTIVE - To investigate the initial energy level required for electrical cardioversion of atrial fibrillation (AF). METHODS - We studied patients undergoing electrical cardioversion in the 1st Multicenter Trial of SOCESP. Patients were divided into 2 groups according to the initial energy level of electrical cardioversion: 100J and > or = 150J. We compared the efficacy of the initial and final shock of the procedure, the number of shocks administered, and the cumulative energy levels. RESULTS - Eight-six patients underwent electrical cardioversion. In 53 patients (62%), cardioversion was started with 100J, and in 33 patients (38%), cardioversion was started with > or = 150J. Groups did not differ regarding clinical features and therapeutical interventions. A tendency existed towards greater efficacy of the initial shock in patients who received > or = 150J (61% vs. 42% in the 100J group, p=0.08). The number of shocks was smaller in the > or = 150J group (1.5±0.7 vs. 2.1±1.3, p=0.04). No difference existed regarding the final efficacy of electrical cardioversion and total cumulative energy levels in both groups. In the subgroup of patients with recent-onset AF (<=48h), the cumulative energy level was lower in the 100J group (240±227J vs. 324±225J, p=0.03). CONCLUSION - Patients who were given initial energy of > or = 150J received fewer counter shocks with a tendency toward greater success than those patients who were given 100J; however, in patients with recent-onset AF, the average cumulative energy level was lower in the 100J group. These data suggest that electrical cardioversion should be initiated with energy levels > or = 150J in patients with chronic AF.

Isolamento das veias pulmonares em pacientes com fibrilação atrial permanente secundária a valvopatia mitral

OBJETIVO: Analisar a eficácia do isolamento cirúrgico das veias pulmonares para restabelecer ritmo sinusal em pacientes com fibrilação atrial secundária à doença mitral. MÉTODOS: 33 pacientes com indicação de correção cirúrgica da valva mitral e com fibrilação atrial permanente, foram submetidos ao isolamento cirúrgico das veias pulmonares, sendo 67% mulheres. Média de idade de 56,3±10 anos, classe funcional NYHA pré-operatória de 3,2±0,6, tamanho de átrio esquerdo de 5,5± 0,9 cm, fração de ejeção de 61,3±13%. A técnica cirúrgica consistiu de incisão circunferencial ao redor das 4 veias pulmonares, excisão do apêndice atrial esquerdo e de incisão perpendicular desde a borda inferior da incisão, isolando as veias pulmonares, até o ânulo da valva mitral. Arritmias precoces foram tratadas, agressivamente, com cardioversão. RESULTADOS: O seguimento médio foi de 23,9±17 meses e ocorreram 3 óbitos no pós-operatório. Dez pacientes necessitaram de cardioversão elétrica no pós-operatório; 87% apresentavam ritmo sinusal na última consulta e 33% estavam em uso de amiodarona. CONCLUSÃO: Isolamento das veias pulmonares associado à cirurgia da valva mitral é uma técnica efetiva e segura na manutenção de ritmo sinusal em pacientes com fribilação atrial permanente.