Surface Characteristics of Reciprocating Instruments Before and After Use - A SEM Analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Microbial, physical, chemical and sensory properties of Minas Frescal Cheese with inulin and acacia gum

Minas frescal cheese is a semi-skimmed product with high moisture and simple preparation and one of the most consumed in Brazil. Thus, the aim of this study was to combine the characteristics of inulin and gum acacia (by having fibers and being prebiotic) to produce a minas frescal cheese. Were evaluate the characteristics physical and chemical, microbial and sensory acceptance (hedonic scale) of each cheese. Three cheeses were prepared; one as a standard (QP) without inulin, and others with 0.49% (QI25) and 0.98% (QI50) inulin, the amount of gum acacia was maintained. The yield of the formulations with gum acacia and inulin were 9.76% for (QI25) and to 20.03% (QI50) higher than the standard sample. In relation to moisture content, samples containing inulin and gum acacia showed values greater than the standard sample. The sensory analysis indicated no differences between scores for color, aroma and texture, but significant differences were detected for flavor, in which (QI25) received the highest acceptance. Regarding the energy value, it was obtained 276 kcal (QP), 215 kcal (QI25) and 190 kcal (QI50). Therefore, the developed product presents satisfactory results for sensory, microbiological and physical- chemical analyses.

Effect of the addition of wheat fiber and partial pork back fat on the chemical composition, texture and sensory property of low-fat bologna sausage containing inulin and oat fiber

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis of the effect of wash water reduction on bleached pulp characteristics

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fabrication and structural characterization of bismuth niobate thin films grown by chemical solution deposition

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Myoglobin from the burrowing reptile Amphisbaena alba: concentrations and functional characteristics

1. 1. Myoglobin from the subterranean reptile Amphisbaena alba was isolated for measurement of concentrations and physico-chemical properties. 2. 2. The concentrations (averaging 12.1 mg.g-1 wet weight in the temporal muscles and 5.8-6.0 in the muscles that motivate the wedge-shaped head which forms the burrowing tool) far exceed those earlier reported for reptiles and other terrestrial vertebrates. 3. 3. The myoglobin has a low O2 affinity compared to mammals (P50 = 2mmHg at 25°C). In the presence of the same myoglobin O2 tension as in mammals this appears to favour similar in vivo O2 saturations at the lower reptilian body temperature. 4. 4. The temperature sensitivity of P50 reflect a heat of oxygenation, ΔH near -13 kcal· mol-1. The myoglobin is monomeric and thus lacks cooperativity in O2 binding and there is no Bohr effect. 5. 5. The pattern of microheterogeneity is similar to that of myoglobin of terrestrial vertebrates but different to aquatic mammals and reptiles. The major and two minor components exhibit very similar O2 affinities. 6. 6. The concentrations and oxygen-binding characteristics of Amphisbaena myoglobin are discussed with regard to the flow of O2 to the mitochondria during digging activity in hypoxic burrow environments. © 1981.

Physico-chemical properties of starches isolated from potato cultivars grown in soils with different phosphorus availability

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Study of physical-chemical stability in contaminated conditioners by bacteria

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A comparative study of Odonata (Insecta) in aquatic ecosystems with distinct characteristics

The objective of this study was to compare the richness and density of Odonata larvae in four distinct environments: lotic with large pollutant loads, lotic with small pollutant loads, lentic disconnected from a river and lentic connected to a river, as well as to record the physical and chemical parameters of the water in the four environments. We identified a total of 1,302 Odonata larvae in the four habitats. The environmental variables measured were: dissolved oxygen, pH, conductivity, suspended matter, air and water temperature, precipitation, depth, and the biomass of the macrophytes. The lentic habitats exhibited a greater Odonata larvae density in relation to the lotic habitats, except during April and December of 2006. The Guareí River, however, presented an elevated conductivity, possibly because of a greater quantity of pollutants it received during the period between June and September of 2006, and it showed a higher density of Odonata larvae in comparison to the Paranapanema River. The temperature and the dissolved oxygen on the water surface were, respectively, greater and smaller in the lakes in comparison to the rivers. In spite of the Odonata density being higher in the lentic ecosystems in comparison to the lotic, the richness was not altered during the period studied. Nevertheless, the genera composition was distinct, showing that some taxa show a certain preference for certain types of ecosystems like Calopterygidae and Neogomphus, which were shown exclusively in the Paranapanema River.

NF93-136 Chemical Spots, Stains and Discoloration of Home Furnishings

We live in a world of chemicals. Unfortunately, some of the characteristics that make household chemical products the most useful are the same qualities that lead to trouble when these products are carelessly handled. A chemical stain or spot is a serious kind of stain that is appearing with increasing frequency and is different from ordinary stains. This type of discoloration or color is caused by a variety of chemical ingredients contains in dozens of common household products. This NebFact discusses the different chemical spots, stains and discolorations that are found in your home furnishings.

Physico-chemical properties of Brazilian cocoa butter and industrial blends. Part I - Chemical composition, solid fat content and consistency

A comparative study of the primary properties of six cocoa butter samples, representative of industrial blends and cocoa butter extracted from fruits cultivated in different geographical areas in Brazil is presented. The samples were evaluated according to fatty acid composition, triacylglycerol composition, regiospecific distribution, melting point, solid fat content and consistency. The results allowed for differentiating the samples according to their chemical compositions, thermal resistance properties, hardness characteristics, as well as technological adequacies and potential use in regions with tropical climates.

Quantitative Chemical Profile and Multivariate Statistical Analysis of Alembic Distilled Sugarcane Spirit Fractions

Concentrations of 39 organic compounds were determined in three fractions (head, heart and tail) obtained from the pot still distillation of fermented sugarcane juice. The results were evaluated using analysis of variance (ANOVA), Tukey's test, principal component analysis (PCA), hierarchical cluster analysis (HCA) and linear discriminant analysis (LDA). According to PCA and HCA, the experimental data lead to the formation of three clusters. The head fractions give rise to a more defined group. The heart and tail fractions showed some overlap consistent with its acid composition. The predictive ability of calibration and validation of the model generated by LDA for the three fractions classification were 90.5 and 100%, respectively. This model recognized as the heart twelve of the thirteen commercial cachacas (92.3%) with good sensory characteristics, thus showing potential for guiding the process of cuts.

Chemical mechanism of controlled nitric oxide release from trans-[RuCl([15]aneN(4))NO](PF6)(2) as a vasorelaxant agent

The nitrosyl ruthenium complex, trans-[RuCl([15]aneN(4))NO](PF6)(2), ([15]aneN(4) = 1,4,8,12-tetraazacyclopentadecane), exhibits vasorelaxation characteristics attributed to its nitric oxide release properties. The observed in vitro and in vivo vasodilation is dependent on noradrenaline concentration. We report here the chemical mechanism of the reaction between noradrenaline and trans-[RuCl([15]aneN(4))NO](PF6)(2) in aqueous phosphate buffer solution at pH 7.40. NO measurement by NO-sensor electrode, cyclic voltammetry, (PNMR)-P-31 and HPLC analysis were used to investigate the reduction process as the fundamental step for NO release characteristic of trans-[RuCl([15]aneN(4))NO](PF6)(2). A supramolecular species containing HPO4 (2-) as a bridging group between noradrenaline and trans-[RuCl([15]aneN(4))NO](PF6)(2) is suggested as an intermediate prior to the reduction of the nitrosyl ruthenium complex.

The effect of curing light and chemical catalyst on the degree of conversion of two dual cured resin luting cements

The aim of this study was to evaluate the influence of different curing lights and chemical catalysts on the degree of conversion of resin luting cements. A total of 60 disk-shaped specimens of RelyX ARC or Panavia F of diameter 5 mm and thickness 0.5 mm were prepared and the respective chemical catalyst (Scotchbond Multi-Purpose Plus or ED Primer) was added. The specimens were light-cured using different curing units (an argon ion laser, an LED or a quartz-tungsten-halogen light) through shade A2 composite disks of diameter 10 mm and thickness 2 mm. After 24 h of dry storage at 37A degrees C, the degree of conversion of the resin luting cements was measured by Fourier-transformed infrared spectroscopy. For statistical analysis, ANOVA and the Tukey test were used, with p a parts per thousand currency signaEuro parts per thousand 0.05. Panavia F when used without catalyst and cured using the LED or the argon ion laser showed degree of conversion values significantly lower than RelyX ARC, with and without catalyst, and cured with any of the light sources. Therefore, the degree of conversion of Panavia F with ED Primer cured with the quartz-tungsten-halogen light was significantly different from that of RelyX ARC regardless of the use of the chemical catalyst and light curing source. In conclusion, RelyX ARC can be cured satisfactorily with the argon ion laser, LED or quartz-tungsten-halogen light with or without a chemical catalyst. To obtain a satisfactory degree of conversion, Panavia F luting cement should be used with ED Primer and cured with halogen light.