Reaction of beta-haloenones with tetrathiomolybdate: Synthesis of vinyl disulfides

beta -Haloenones react readily with benzyltriethylammonium tetrathiomolybdate to form the corresponding vinyl disulfides in good yields.

A formal synthesis of the perhydrogephyrotoxin

A short but uneventful formal synthesis of perhydrogephyrotoxin 3 from readily available tricyclo[5.2.1.0(2,6)]decane derivative 8 via the intermediacy of the cis-hydroindanone 13 is reported. This work constitutes further demonstration of the carbocycle-heterocycle equivalency theme in the synthesis of alkaloids.

An enantiospecific approach to pinguisanes from (R)-carvone. Total synthesis of (+)-pinguisenol

Enantiospecific total synthesis of (+)-pinguisenol 1, a sesquiterpene containing a cis-1,2,6,7-tetramethylbicyclo[4.3.0]nonane carbon framework incorporating two vicinal quaternary carbon atoms and four cis-oriented methyl groups on four contiguous carbon atoms, isolated from a liverwort, is described. The orthoester Claisen rearrangement of the allyl alcohol 9, obtained from (R)-carvone, generates the ester 12. Intramolecular cyclopropanation of the diazo ketone 13, derived from the ester 12, furnishes the tricyclic ketone 7. Degradation of the isopropenyl group followed by regioselective reductive cyclopropane ring cleavage transforms compound 7 into the hydroxy ketone 21. Wolff–Kishner reduction of the hydroxy ketone 21 followed by oxidation and Grignard reaction furnishes pinguisenol (+)- 1.

Synthesis,characterization and photoluminescence properties of CaSiO3 :Dy3+ nanophosphors

CaSiO3 : Dy3+ (1-5 mol. %) nanophosphors were synthesized by a simple low-temperature solution combustion method. Powder X-ray diffraction patterns revealed that the phosphors are crystalline and can be indexed to a monoclinic phase. Scanning electron micrographs exhibited faceted plates and angular crystals of different sizes with a porous nature. Photoluminescence properties of the Dy3+-doped CaSiO3 phosphors were observed and analyzed. Emission peaks at 483, 573 and 610 nm corresponding to Dy3+ were assigned as F-4(9/2)-> H-6(15/2), F-4(9/2) -> H-6(13/2) and F-4(9/2) -> H-6(11/2) transitions, respectively, and dominated by the Dy3+ F-4(9/2) -> H-6(13/2) hyperfine transition. Experimental results revealed that the luminescence intensity was affected by both heat treatment and the concentration of Dy3+ (1-5 mol. %) in the CaSiO3 host. Optimal luminescence conditions were achieved when the concentration of Dy3+ was 2 mol. %. UV-visible absorption features an intense band at 240 nm, which corresponds to an O-Si ligand-to-metal charge transfer band in the SiO32- group. The optical energy band gap for the undoped sample was found to be 5.45 eV, whereas in Dy3+-doped phosphors it varies in the range 5.49-5.65 eV. The optical energy gap widens with increase of Dy3+ ion dopant.

Enantiospecific total synthesis of (+)-lentiginosine

A facile synthesis of (+)-lentiginosine is accomplished from L-(+)-tartaric acid. Key transformations in the synthesis include the elaboration of gamma-oxo amide derived from tartaric acid.

Amido binding to ReO3+ core: Synthesis, structure and intermolecular interactions

The light green coloured complexes of general formula [(ReO)-O-V(L)CI(OH2)]Cl have been synthesised in good yields by reacting [RcvOCl(3)(AsPh3)21 with HL in dichloromethane in dinitrogen atmosphere. Here, L- is the deprotonated form of N',N'-bis(2-pyridylmethyl)amine (HL1); N-(2-pyridylmethyl)-N',N'-dimethylethylenediamine (HL2) and N-(2-pyridylmethyl)-N',N-diethylethylenediamine (HL3). Single crystal X-ray structure determination of [(ReO)-O-V(L-1)Cl(OH2)Cl confirms the amido binding of ReO3+ species. In the solid state of [(ReO)-O-V(L-1)Cl(OH2)]Cl, the coordinated and counter chloride ions are engaged in Re-Cl... H-C(ring), Cl...H-C(ring) and Re(OH2)...Cl hydrogen bonding and forming of a supramolecular network in the solid state. The subunit of the supramolecular network consists of one eight-membered and two nine-membered hydrogen bonded rings. The average diameters of eight-membered and nine-membered rings are similar to 3.70 and similar to 5.26 angstrom, respectively.

Crystal structure of 2-thiophene-2-yl-3(thiophene-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one and the synthesis, spectral and thermal studies of its transition metal(II) complexes

The synthesis of manganese(II), cobalt(II), nickel(II), copper(II), zinc(II) and cadmium(II) complexes of a new ligand 2-thiophene-2-yl-3(thiophene-2-carboxylidene-amino)-1,2-dihydroquinazolin-4(3H)-one (TTCADQ) is described. The ligand and metal complexes were characterized by elemental analysis, conductivity measurements, spectral (u.v.-vis., i.r., 1D n.m.r., 2D hetcor and e.p.r.) and thermal studies. The formation of 1,2-dihydroquinazolin-4(3H)-one rather than hydrazone, in the reaction of aromatic aldehyde and o-aminobenzoylhydrazide is proved by single crystal X-ray diffraction and 2D hetcor n.m.r. studies. On the basis of elemental analysis, u.v.-vis.spectroscopy and magnetic moment studies, six coordinate geometry for all the complexes was proposed. The i.r. spectral studies reveal the bidentate behaviour of the ligand.

Towards a green synthesis of LAB's: Effect of rare earth metal ions on the benzene alkylation with 1-dodecene over NaFAU-Y zeolites

Chemically modified microporous materials can be prepared as robust catalysts suitable for application in vapor phase processes such as Friedel-Crafts alkylation. In the present paper we have investigated the use of rare earth metal (Ce3+, La3+, RE3+, and Sm3+) exchanged Na-Y zeolites as catalysts for the alkylation of benzene with long chain linear 1-olefin; 1-dodecene. Thermodesorption studies of 2,6-dimethylpyridine adsorbed catalysts (in the temperature range 573 to 873 K) show that the rare earth zeolites are highly Bronsted acidic in nature. A perfect correlation between catalyst selectivity towards the desired product (2-phenyldodecane) and Bronsted acid sites amount has been observed. (c) 2006 Springer Science + Business Media, Inc.

Total synthesis of (+/-)-herbertenediol

A formal total synthesis of the sesquiterpene (+/-)-herbertenediol and its dimers mastigophorenes A-D has been accomplished, starting from vanillin via 2,3-dimethoxy-5-methylbenzaldehyde. A combination of Claisen rearrangement and ring-closing metathesis reactions were employed for the generation of the two vicinal quaternary carbons on a cyclopentane ring.

A simple synthesis and characterization of CuS nanocrystals

Water-soluble CuS nanocrystals and nanorods were prepared by reacting copper acetate with thioacetamide in the presence of different surfactants and capping agents. The size of the nanocrystals varied from 3-20 nm depending on the reaction parameters such as concentration, temperature, solvent and the capping agents. The formation of nanocrystals was studied by using UV-visible absorption spectroscopy.

The first total synthesis of (+/-)-lagopodin A

The first total synthesis of (±)-lagopodin A and a formal total synthesis of enokipodins A and B is described. The requisite precursors containing two vicinal quaternary carbon atoms were assembled employing Claisen rearrangement and an RCM reaction as key steps starting from 2,5-dimethoxy-4-methylacetophenone.

Improved synthesis of carbon nanotubes with junctions and of single-walled carbon nanotubes

Pyrolysis of thiophene over nickel nanoparticles dispersed on silica is shown to yield Y-junction carbon nanotubes with smaller diameters than those obtained by the pyrolysis of organometallic-thiophene mixtures. In the presence of water vapour, the pyrolysis of organometallic-hydrocarbon mixtures yields single-walled nanotubes, as well as relatively narrow-diameter carbon nanotubes with Y-junctions. Pyrolysis-of organometallic-hydrocarbon mixtures, in the absence of water vapour, only gives nanotubes with T- and Y-junctions.

Synthesis and characterisation of co-evaporated tin sulphide thin films

Tin sulphide films were grown at different substrate temperatures by a thermal co-evaporation technique. The crystallinity of the films was evaluated from X-ray diffraction studies. Single-phase SnS films showed a strong (040) orientation with an orthorhombic crystal structure and a grain size of 0.12 mu m. The films showed an electrical resistivity of 6.1 Omega cm with an activation energy of 0.26 eV. These films exhibited an optical band gap of 1.37 eV and had a high optical absorption coefficient (> 10(4) cm(-1)) above the band-gap energy. The results obtained were analysed to evaluate the potentiality of the co-evaporated SnS films as an absorber layer in solar photovoltaic devices.

Low-temperature polymer precursor-based synthesis of nanocrystalline particles of lanthanum calcium manganese oxide (La0.67Ca0.33MnO3) with enhanced ferromagnetic transition temperature

We report a simple modified polymeric precursor route for the synthesis of highly crystalline and homogenous nanoparticles of lanthanum calcium manganese oxide (LCMO). The LCMO phase formation was studied by thermal analysis, x-ray powder diffraction, and infrared spectroscopy at different stages of heating. These nanocrystallites (average particle size of 30 nm) possess ferromagnetic-paramagnetic transition temperature (T-c) of 300 K, nearly 50 K higher than that of a single crystal. The Rietveld analysis of the powder x-ray diffraction data of the nanopowders reveals significant lattice contraction and reduction in unit cell anisotropy-these structural changes are correlated to the enhancement in T-c.