Alternative liquid biofuels for lime kilns

Causticizing plant is an important part of kraft pulp mill. It uses green liquor from recovery boiler as a raw material and consumes lime to produce white liquor, which is an important chemical used in pulping. Lime kiln is a part of the causticizing process. It is used to convert lime mud, a by-product obtained from the causticizing back to lime in high temperatures. This conversion requires a lot of energy. The most common fuels used as energy source for lime kiln are heavy fuel oil and natural gas. In a modern pulp mill lime kiln is the only user of significant amount of fossil fuels. Replacing fossil fuels with biofuels can have prominent economical and environmental benefits. Interest in using biofuels as energy source of lime kiln has become a worldwide issue in the recent years. However fuels used for lime kiln have a lot of certain requirements. The purpose of this work is to study the required characteristics from liquid fuels used in pulp mill lime kiln and to map suitable liquid biofuels already available in the markets. Also taxation of liquid biofuels compared to heavy fuel oil in Finland, Sweden and Germany is shortly introduced.

Ion selective electrodes for determination of low and ultra low concentrations of lead (II) in natural waters

Att övervaka förekomsten av giftiga komponenter i naturliga vattendrag är nödvändigt för människans välmående. Eftersom halten av föroreningar i naturens ekosystem bör hållas möjligast låg, pågår en ständig jakt efter kemiska analysmetoder med allt lägre detektionsgränser. I dagens läge görs miljöanalyser med dyr och sofistikerad instrumentering som kräver mycket underhåll. Jonselektiva elektroder har flera goda egenskaper som t.ex. bärbarhet, låg energiförbrukning, och dessutom är de relativt kostnadseffektiva. Att använda jonselektiva elektroder vid miljöanalyser är möjligt om deras känslighetsområde kan utvidgas genom att sänka deras detektionsgränser. För att sänka detektionsgränsen för Pb(II)-selektiva elektroder undersöktes olika typer av jonselektiva membran som baserades på polyakrylat-kopolymerer, PVC och PbS/Ag2S. Fast-fas elektroder med membran av PbS/Ag2S är i allmänhet enklare och mer robusta än konventionella elektroder vid spårämnesanalys av joniska föroreningar. Fast-fas elektrodernas detektionsgräns sänktes i detta arbete med en nyutvecklad galvanostatisk polariseringsmetod och de kunde sedan framgångsrikt användas för kvantitativa bestämningar av bly(II)-halter i miljöprov som hade samlats in i den finska skärgården nära tidigare industriområden. Analysresultaten som erhölls med jonselektiva elektroder bekräftades med andra analytiska metoder. Att sänka detektionsgränsen m.hj.a. den nyutvecklade polariseringsmetoden möjliggör bestämning av låga och ultra-låga blyhalter som inte kunde nås med klassisk potentiometri. Den verkliga fördelen med att använda dessa blyselektiva elektroder är möjligheten att utföra mätningar i obehandlade miljöprov trots närvaron av fasta partiklar vilket inte är möjligt att göra med andra analysmetoder. Jag väntar mig att den nyutvecklade polariseringsmetoden kommer att sätta en trend i spårämnesanalys med jonselektiva elektroder.

Generation and Characterization of Knockout Mice and Analysis of Patient Material Demonstrates a Role for Tissue Inhibitor of Metalloproteinases 4 (Timp4) in the Cardiovascular System and Tumor Metastasis

This thesis focuses on tissue inhibitor of metalloproteinases 4 (TIMP4) which is the newest member of a small gene and protein family of four closely related endogenous inhibitors of extracellular matrix (ECM) degrading enzymes. Existing data on TIMP4 suggested that it exhibits a more restricted expression pattern than the other TIMPs with high expression levels in heart, brain, ovary and skeletal muscle. These observations and the fact that the ECM is of special importance to provide the cardiovascular system with structural strength combined with elasticity and distensibility, prompted the present molecular biologic investigation on TIMP4. In the first part of the study the murine Timp4 gene was cloned and characterized in detail. The structure of murine Timp4 genomic locus resembles that in other species and of the other Timps. The highest Timp4 expression was detected in heart, ovary and brain. As the expression pattern of Timp4 gives only limited information about its role in physiology and pathology, Timp4 knockout mice were generated next. The analysis of Timp4 knockout mice revealed that Timp4 deficiency has no obvious effect on the development, growth or fertility of mice. Therefore, Timp4 deficient mice were challenged using available cardiovascular models, i.e. experimental cardiac pressure overload and myocardial infarction. In the former model, Timp4 deficiency was found to be compensated by Timp2 overexpression, whereas in the myocardial infarct model, Timp4 deficiency resulted in increased mortality due to increased susceptibility for cardiac rupture. In the wound healing model, Timp4 deficiency was shown to result in transient retardation of re-epithelialization of cutaneous wounds. Melanoma tumor growth was similar in Timp4 deficient and control mice. Despite of this, lung metastasis of melanoma cells was significantly increased in Timp4 null mice. In an attempt to translate the current findings to patient material, TIMP4 expression was studied in human specimens representing different inflammatory cardiovascular pathologies, i.e. giant cell arteritis, atherosclerotic coronary arteries and heart allografts exhibiting signs of chronic rejection. The results showed that cardiovascular expression of TIMP4 is elevated particularly in areas exhibiting inflammation. The results of the present studies suggest that TIMP4 has a special role in the regulation of tissue repair processes in the heart, and also in healing wounds and metastases. Furthermore, evidence is provided suggesting the usefulness of TIMP4 as a novel systemic marker for vascular inflammation.

Testate amoebae (thecamoebians) as indicators of aquatic mine impact

The environmental impacts of a single mine often remain local, but acidic and metal-rich acid mine drainage (AMD) from the waste materials may pose a serious threat to adjacent surface waters and their ecosystems. Testate amoebae (thecamoebian) analysis was used together with lake sediment geochemistry to study and evaluate the ecological effects of sulphidic metal mines on aquatic environments. Three different mines were included in the study: Luikonlahti Cu-mine in Kaavi, eastern Finland, Haveri Cu-Au mine in Ylöjärvi, southern Finland and Pyhäsalmi Zn-Cu-S mine in Pyhäjärvi, central Finland. Luikonlahti and Haveri are closed mines, but Pyhäsalmi is still operating. The sampling strategy was case specific, and planned to provide a representative sediment sample series to define natural background conditions, to detect spatial and temporal variations in mine impacts, to evaluate the possible recovery after the peak contamination, and to distinguish the effects of other environmental factors from the mining impacts. In the Haveri case, diatom analyses were performed alongside thecamoebian analysis to evaluate the similarities and differences between the two proxies. The results of the analyses were investigated with multivariate methods (direct and indirect ordinations, diversity and distance measure indices). Finally, the results of each case study were harmonized, pooled, and jointly analyzed to summarize the results for this dissertation. Geochemical results showed broadly similar temporal patterns in each case. Concentrations of ions in the pre-disturbance samples defined the natural baseline against which other results were compared. The beginning of the mining activities had only minor impacts on sediment geochemistry, mainly appearing as an increased clastic input into the lakes at Haveri and Pyhäsalmi. The active mining phase was followed by the metallic contamination and, subsequently, by the most recent change towards decreased but still elevated metal concentrations in the sediments. Because of the delay in the oxidation of waste material and formation of AMD, the most intense, but transient metal contamination phase occurred in the post-mining period at Luikonlahti and Haveri. At Pyhäsalmi, the highest metal contamination preceded effluent mitigation actions. Spatial gradients were observed besides the temporal evolution in both the pre-disturbance and mine-impacted samples from Luikonlahti and Pyhäsalmi. The geochemical gradients varied with distance from the main source of contaminants (dispersion and dilution) and with water depth (redox and pH). The spatial extent of the highest metal contamination associated with these mines remained rather limited. At Haveri, the metallic impact was widespread, with the upstream site in another lake basin found to be contaminated. Changes in thecamoebian assemblages corresponded well with the geochemical results. Despite some differences, the general features and ecological responses of the faunal assemblages were rather similar in each lake. Constantly abundant strains of Difflugia oblonga, Difflugia protaeiformis and centropyxids formed the core of these assemblages. Increasing proportions of Cucurbitella tricuspis towards the surface samples were found in all of the cases. The results affirmed the indicator value of some already known indicator forms, but such as C. tricuspis and higher nutrient levels, but also elicited possible new ones such as D. oblonga ‘spinosa’ and clayey substrate, high conductivity and/or alkalinity, D. protaeiformis ‘multicornis’ and pH, water hardness and the amount of clastic material and Centropyxis constricta ‘aerophila’ and high metal and S concentrations. In each case, eutrophication appeared to be the most important environmental factor, masking the effects of other variables. Faunal responses to high metal inputs in sediments remained minor, but were nevertheless detectable. Besides the trophic state of the lake, numerical methods suggested overall geochemical conditions (pH, redox) to be the most important factor at Luikonlahti, whereas the Haveri results showed the clearest connection between metals and amoebae. At Pyhäsalmi, the strongest relationships were found between Ca- and S-rich present loading, redox conditions and substrate composition. Sediment geochemistry and testate amoeba analysis proved to be a suitable combination of methods to detect and describe the aquatic mine impacts in each specific case, to evaluate recovery and to differentiate between the effects of different anthropogenic and natural environmental factors. It was also suggested that aquatic mine impacts can be significantly mitigated by careful design and after-care of the waste facilities, especially by reducing and preventing AMD. The case-specific approach is nevertheless necessary because of the unique characteristics of each mine and variations in the environmental background conditions.

Perfil epidemiológico de acidentes com material biológico entre estudantes de medicina em um pronto-socorro cirúrgico

OBJETIVO: avaliar os acidentes com material biológico entre estudantes de medicina estagiando em um pronto-socorro de trauma e identificar as principais situações relacionadas, causas atribuídas e prevenção. MÉTODOS: estudo com abordagem quantitativa. Os dados foram coletados através de um questionário, aplicado via internet, contendo perguntas fechadas de escolha múltipla, referentes a acidentes com material biológico. A amostra obtida foi 100 estudantes. RESULTADOS: trinta e dois se acidentaram com materiais biológicos. As atividades de maior risco foram anestesia local (39,47%), sutura (18,42%) e recapeamento de agulha (15,79%). As principais vias de exposição ao material biológico foram contato com olho ou mucosa, com 34%, através de seringa com agulha com 45%. Após a contaminação, apenas 52% notificaram o acidente ao setor responsável. CONCLUSÃO: as principais causas de acidente encontradas e vias de exposição podem ser atribuídas a diversos fatores, como falta de treinamento e ao não uso de equipamentos de proteção individual. Ações preventivas e educativas são de extrema importância para diminuir a incidência dos acidentes com materiais biológicos e melhorar a conduta pós-exposição. É preciso entender as principais causas atribuídas e situações relacionadas a fim de implantar medidas gerais e eficazes.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

Fatores Associados ao Material Insuficiente em Punção Aspirativa por Agulha Fina nos Nódulos Sólidos da Mama

Objetivo: analisar alguns fatores que possam estar associados à ocorrência de material insuficiente nos aspirados da punção aspirativa por agulha fina (PAAF). Pacientes e Métodos: foram estudadas 351 citologias de pacientes com nódulos sólidos da mama, submetidas a PAAF, como parte de sua investigação diagnóstica. As lâminas foram analisadas por um único citologista, que classificou os esfregaços como malignos, suspeitos, benignos ou material insuficiente para diagnóstico. Foram avaliados a idade da paciente, o tamanho do tumor, o estádio clínico, o Serviço, o dispositivo utilizado na punção e o tipo de lesão puncionada, de acordo com a histologia. A significância de cada variável em relação ao material insuficiente foi testada pelo c². Resultados: houve 67 esfregaços classificados como material insuficiente (19%). O tipo de dispositivo utilizado, o tamanho do tumor, o Serviço e o estádio clínico das lesões não se relacionaram à quantidade de material suficiente ou insuficiente. A idade da paciente e o tipo histológico influenciaram a taxa de material insuficiente, sendo que as pacientes abaixo de 50 anos tiveram uma taxa de 12%, comparada a 30% daquelas acima de 50 anos (p<0,03). Quanto à histologia, nas pacientes com alterações funcionais benignas da mama, a taxa de material insuficiente foi de 30%, seguida daquelas com carcinoma ductal infiltrante, 20%, e, no fibroadenoma, 12% (p<0,02). Conclusão: esse estudo mostrou uma taxa de material insuficiente relativamente alta (19%), a qual foi influenciada pela idade da paciente e pelo tipo histológico da lesão.

Abordagem citogenética e molecular em material de abortos espontâneos

OBJETIVOS: avaliar o desempenho da citogenética e das técnicas de hibridização in situ fluorescente (FISH) e reação em cadeia da polimerase (PCR) no estudo das aneuploidias cromossômicas numéricas e na determinação do sexo fetal em amostras de abortos espontâneos. MÉTODOS: duzentos e dezenove amostras de produtos de abortos espontâneos foram submetidas a estudo citogenético. Deste total, 40 amostras foram também submetidas à técnica de PCR-nested para a determinação do sexo fetal: 32 foram selecionadas devido à falha de crescimento no estudo citogenético e oito foram escolhidas ao acaso. Vinte amostras foram selecionadas para detecção de aneuploidias cromossômicas pela técnica de FISH, utilizando-se sondas para os cromossomos 13, 18, 21, X e Y: 13 casos foram submetidos a FISH devido à falha de crescimento no estudo citogenético e sete foram escolhidos ao acaso. Foi calculada a taxa de sucesso (obtenção de cariótipo) de cada técnica. Para comparação das taxas de sucesso foi utilizado o teste de chi2, sendo considerados significantes resultados com p<0,05. Foi avaliado o índice de acerto entre os resultados das amostras submetidas a mais de um exame, tomando-se como padrão-ouro o resultado do estudo citogenético. RESULTADOS: houve crescimento celular em 84,9% das amostras submetidas a análise citogenética. Em 51,1% dos casos foram encontradas alterações cromossômicas: 65,2% trissomias, 17,9% triploidias, 9,4% tetraploidias, 4,2% monossomia do cromossomo X e 1,1% trissomia dupla, tetrassomia e alteração estrutural. A trissomia mais freqüente foi a do cromossomo 16 (39%). FISH e PCR tiveram taxa de sucesso de 90%, não diferindo significativamente do exame citogenético. Em todos os casos submetidos a mais de um exame os resultados foram concordantes. Nas amostras com falha de crescimento celular no exame citogenético e submetidas a outra técnica, a PCR obteve sucesso em 87,5% e a FISH em 84,6%. CONCLUSÃO: o estudo citogenético de restos ovulares de abortamentos espontâneos teve elevada taxa de sucesso e evidenciou anomalias cromossômicas em mais da metade dos casos. As técnicas de biologia molecular (PCR-nested e FISH) complementaram o estudo citogenético e permitiram a obtenção de resultados seguros na detecção de alterações cromossômicas numéricas e na determinação do sexo fetal.

Infeccoes de transmissao vertical em material abortivo e sangue com enfase em Toxoplasmose gondii

OBJETIVO: Analisar os resultados sorológicos, anatomopatológicos e parasitológicos de material abortivo para infecções com risco de transmissão vertical, com ênfase na toxoplasmose. MÉTODOS: Foi realizado um estudo coorte-transversal tratando da prevalência das doenças infectoparasitárias. Participaram da pesquisa 105 mulheres que sofreram aborto espontâneo completo e/ou incompleto; elas foram entrevistadas por meio de um questionário, e foram coletadas amostras de sangue e material abortivo. Foram realizados testes imunológicos para toxoplasmose, doença de Chagas, rubéola, citomegalovírus e sífilis e análise anatomopatológica nos restos ovulares. RESULTADOS: 55% das mulheres tinham entre 20 e 30 anos de idade. A maioria (68%) apresentou idade gestacional entre a 7ª e a 14ª semanas. 54,3% das mulheres tinham o ensino médio completo ou incompleto. Pela análise da sorologia, a infecção com risco de transmissão vertical mais frequente foi o citomegalovírus (CMV) com 97,1% de positividade, e em seguida a rubéola, com 95,2%. A toxoplasmose teve um percentual de 54,3%, a doença de Chagas, de 1,9% e a sífilis, de 0,95%. A análise dos laudos de biópsia demonstrou que 63,1% apresentaram inflamação e 34%, ausência de inflamação. Das análises sorológica, anatomopatológica e parasitológica das 105 mulheres, 57 foram soropositivas para T. gondii, e nenhuma teve resultado positivo para a Reação em Cadeia da Polimerase (PCR) e para inoculação em camundongos. CONCLUSÕES: A prevalência de doenças com risco de transmissão congênita nas mulheres com abortamento espontâneo é importante, sendo necessárias pesquisas visando esclarecer a etiologia do aborto.

Ultrastructural observation of the airways of recovered and susceptible pigs after inoculation with Mycoplasma hyopneumoniae

To determine the morphological differences in the epithelium of the airways of recovered and susceptible pigs after Mycoplasma hyopneumoniae challenge, twenty-four 4-week-old M. hyopneumoniae-free pigs were intratracheally inoculated with 107ccu/ml of a pure low-passaged culture of the P5722-3 strain of M. hyopneumoniae challenge material. Eight pigs (group I) were challenged at the beginning of the experiment and rechallenged 3 months later. Group II pigs were also challenged at the beginning of the experiment and necropsied 3 months later. Group III pigs were challenged at the same time as the rechallenge of group I pigs. Eight nonchallenged pigs served as controls (group IV). Three days after the second challenge of group I and the first challenge of group III, and every 3 and 4 days thereafter, two pigs from each group were euthanatized by electrocution and necropsied. Samples of bronchi and lung tissue were examined using light and electron microscopy (SEM and TEM). Macroscopic lesions were observed in the lungs of all group III pigs (average = 4.74%) and were characterized by purple-red areas of discoloration and increased firmness affecting the cranioventral aspect of the lungs. Macroscopic lesions of pneumonia in groups I and II were minimal (less than 1%). There were no gross lesions of pneumonia in control (group IV) pigs. Microscopic lesions were characterized by hyperplasia of the peribronchial lymphoid tissue and mild neutrophilic infiltrates in alveoli. Electron microscopy showed patchy areas with loss of cilia and presence of leukocytes and mycoplasmas in bronchi of susceptible pigs (group III). The bronchial epithelium of rechallenged (group I), recovered (group II), and control (group IV) pigs was ultrastructurally similar indicating recovery of the former two groups. Although mycoplasmas were seen among cilia, a second challenge on pigs of group I did not produce another episode of the disease nor did it enhance morphological changes, suggesting that those pigs could become carriers of M. hyopneumoniae.

Pretreatment processes in gold recovery by thiosulphate leaching

This thesis describes several different pretreatment processes for gold concentrates and ores. The thesis is divided to theoretical part and experimental part. The theoretical part presents the operating principle of the main pretreatment methods and their suitability for thiosulphate leaching. In the theoretical part also the whole recovery process for gold from ore to elemental gold is presented. In the experimental part the study is focused on pretreatment of sulphidic refractory concentrates with mechanical activation and chemical oxidation under alkaline environment; and their effect on leachability in the thiosulphate leaching. In the experimental part a combined 2-step process, where chemical oxidation under ammoniacal environment is cascaded with thiosulphate leaching in the same conditions, is also tested. The main sulphuric mineral components in the studied refractory concentrate are pyrite (49.4 %) and arsenopyrite (27.7 %). The gold content in the concentrate is 11.3 ppm and silver content is 90 ppm. Without pretreatment the gold conversion in thiosulphate leaching was 30 %, which was analyzed at the time point of 9 hours. At that time the silver conversion was 17 %. By using mechanical activation the gold conversion reached was 59 % and silver conversion 26 %. With chemical oxidation under alkaline environment, where the used chemical was sodium hydroxide, the reached conversion of gold was 72 % and 31 % for silver. In the combined oxidation and leaching experiment the conversion of gold remained at 49 % and 18 % for silver.

Recovery of carboxylic acids from aqueous streams by extraction and back extraction

Separation of carboxylic acids from aqueous streams is an important part of their manufacturing process. The aqueous solutions are usually dilute containing less than 10 % acids. Separation by distillation is difficult as the boiling points of acids are only marginally higher than that of water. Because of this distillation is not only difficult but also expensive due to the evaporation of large amounts of water. Carboxylic acids have traditionally been precipitated as calcium salts. The yields of these processes are usually relatively low and the chemical costs high. Especially the decomposition of calcium salts with sulfuric acid produces large amounts of calcium sulfate sludge. Solvent extraction has been studied as an alternative method for recovery of carboxylic acids. Solvent extraction is based on mixing of two immiscible liquids and the transfer of the wanted components form one liquid to another due to equilibrium difference. In the case of carboxylic acids, the acids are transferred from aqueous phase to organic solvent due to physical and chemical interactions. The acids and the extractant form complexes which are soluble in the organic phase. The extraction efficiency is affected by many factors, for instance initial acid concentration, type and concentration of the extractant, pH, temperature and extraction time. In this paper, the effects of initial acid concentration, type of extractant and temperature on extraction efficiency were studied. As carboxylic acids are usually the products of the processes, they are wanted to be recovered. Hence the acids have to be removed from the organic phase after the extraction. The removal of acids from the organic phase also regenerates the extractant which can be then recycled in the process. The regeneration of the extractant was studied by back-extracting i.e. stripping the acids form the organic solution into diluent sodium hydroxide solution. In the solvent regeneration, the regenerability of different extractants and the effect of initial acid concentration and temperature were studied.

Summaries of lecture recordings used as learning material in blended learning

Julkaisumaa: 530 AN ANT Alankomaiden Antillit