Applicazione di una metodologia LCA all'impiego di biomasse legnose a fini energetici: un confronto tra la produzione di energia termica da cippato e da pellet

Con questo studio si è volto effettuare un confronto tra la generazione di energia termica a partire da cippato e da pellet, con particolare riferimento agli aspetti di carattere ambientale ed economico conseguenti la produzione delle due differenti tipologie di combustibile. In particolare, si sono ipotizzate due filire, una di produzione del cippato, una del pellet, e per ciascuna di esse si è condotta un'Analisi del Ciclo di Vita, allo scopo di mettere in luce, da un lato le fasi del processo maggiormente critiche, dall'altro gli impatti sulla salute umana, sugli ecosistemi, sul consumo di energia e risorse. Quest'analisi si è tradotta in un confronto degli impatti generati dalle due filiere al fine di valutare a quale delle due corrisponda il minore. E' stato infine effettuato un breve accenno di valutazione economica per stimare quale tipologia di impianto, a cippato o a pellet, a parità di energia prodotta, risulti più conveniente.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

Models and methods for power monolithic microwave integrated circuits

Computer aided design of Monolithic Microwave Integrated Circuits (MMICs) depends critically on active device models that are accurate, computationally efficient, and easily extracted from measurements or device simulators. Empirical models of active electron devices, which are based on actual device measurements, do not provide a detailed description of the electron device physics. However they are numerically efficient and quite accurate. These characteristics make them very suitable for MMIC design in the framework of commercially available CAD tools. In the empirical model formulation it is very important to separate linear memory effects (parasitic effects) from the nonlinear effects (intrinsic effects). Thus an empirical active device model is generally described by an extrinsic linear part which accounts for the parasitic passive structures connecting the nonlinear intrinsic electron device to the external world. An important task circuit designers deal with is evaluating the ultimate potential of a device for specific applications. In fact once the technology has been selected, the designer would choose the best device for the particular application and the best device for the different blocks composing the overall MMIC. Thus in order to accurately reproducing the behaviour of different-in-size devices, good scalability properties of the model are necessarily required. Another important aspect of empirical modelling of electron devices is the mathematical (or equivalent circuit) description of the nonlinearities inherently associated with the intrinsic device. Once the model has been defined, the proper measurements for the characterization of the device are performed in order to identify the model. Hence, the correct measurement of the device nonlinear characteristics (in the device characterization phase) and their reconstruction (in the identification or even simulation phase) are two of the more important aspects of empirical modelling. This thesis presents an original contribution to nonlinear electron device empirical modelling treating the issues of model scalability and reconstruction of the device nonlinear characteristics. The scalability of an empirical model strictly depends on the scalability of the linear extrinsic parasitic network, which should possibly maintain the link between technological process parameters and the corresponding device electrical response. Since lumped parasitic networks, together with simple linear scaling rules, cannot provide accurate scalable models, either complicate technology-dependent scaling rules or computationally inefficient distributed models are available in literature. This thesis shows how the above mentioned problems can be avoided through the use of commercially available electromagnetic (EM) simulators. They enable the actual device geometry and material stratification, as well as losses in the dielectrics and electrodes, to be taken into account for any given device structure and size, providing an accurate description of the parasitic effects which occur in the device passive structure. It is shown how the electron device behaviour can be described as an equivalent two-port intrinsic nonlinear block connected to a linear distributed four-port passive parasitic network, which is identified by means of the EM simulation of the device layout, allowing for better frequency extrapolation and scalability properties than conventional empirical models. Concerning the issue of the reconstruction of the nonlinear electron device characteristics, a data approximation algorithm has been developed for the exploitation in the framework of empirical table look-up nonlinear models. Such an approach is based on the strong analogy between timedomain signal reconstruction from a set of samples and the continuous approximation of device nonlinear characteristics on the basis of a finite grid of measurements. According to this criterion, nonlinear empirical device modelling can be carried out by using, in the sampled voltage domain, typical methods of the time-domain sampling theory.

PTA e stenting carotideo: valutazione morfologica ed evolutiva, a breve e medio termine

In un periodo di tre anni è stato svolto un lavoro mirato alla valutazione delle complicanze correlate all’utilizzo dello stenting carotideo. Dopo la preparazione di un protocollo con definizione di tutti i fattori di rischio sono stati individuati i criteri di inclusione ed esclusione attraverso i quali arruolare i pazienti. Da Luglio 2004 a Marzo 2007 sono stati inclusi 298 pazienti e sono state valutate le caratteristiche della placca carotidea, con particolare riferimento alla presenza di ulcerazione e/o di stenosi serrata, la tortuosità dei vasi e il tipo di arco aortico oltre a tutti i fattori di rischio demografici e metabolici. E’ stato valutato quanto e se questi fattori di rischio incrementino la percentuale di complicanze della procedura di stenting carotideo. I pazienti arruolati sono stati suddivisi in due gruppi a seconda della morfologia della placca: placca complicata (placca con ulcera del diametro > di 2 mm e placca con stenosi sub occlusiva 99%) e placca non complicata. I due gruppi sono stati comparati in termini di epidemiologia, sintomatologia neurologica preoperatoria, tipo di arco, presenza di stenosi o ostruzione della carotide controlaterale, tipo di stent e di protezione cerebrale utilizzati, evoluzione clinica e risultati tecnici. I dati sono stati valutati mediante analisi statistica di regressione logistica multipla per evidenziare le variabili correlate con l’insuccesso. Dei 298 pazienti consecutivi sottoposti a stenting, 77 hanno mostrato una placca complicata (25,8%) e 221 una placca non complicata (74,2%). I due gruppi non hanno avuto sostanziali differenze epidemiologiche o di sintomatologia preoperatoria. Il successo tecnico si è avuto in 272 casi (91,2%) e sintomi neurologici post-operatosi si sono verificati in 23 casi (23.3%). Tutti i sintomi sono stati temporanei. Non si sono avute differenze statisticamente significative tra i due gruppi in relazione alle complicanze neurologiche e ai fallimenti tecnici. L’età avanzata è correlata ad un incremento dei fallimenti tecnici. I risultati dello studio portano alla conclusione che la morfologia della placca non porta ad un incremento significativo dei rischi correlati alla procedura di stenting carotideo e che l’indicazione alla CAS può essere posta indipendentemente dalla caratteristica della placca.