Yielding Behaviour of Electron Beam Lithography and Focused Ion Beam Made Nanocrystalline Micro/Nanopillars

Electron beam lithography (EBL) and focused ion beam (FIB) methods were developed in house to fabricate nanocrystalline nickel micro/nanopillars so to compare the effect of fabrication on plastic yielding. EBL was used to fabricate 3 μm and 5 μm thick poly-methyl methacrylate patterned substrates in which nickel pillars were grown by electroplating with height to diameter aspect ratios from 2:1 to 5:1. FIB milling was used to reduce larger grown pillars to sizes similar to EBL grown pillars. X-ray diffraction, electron back-scatter diffraction, scanning electron microscopy, and FIB imaging were used to characterize the nickel pillars. The measured grain size of the pillars was 91±23 nm, with strong <110> and weaker <111> and <110> crystallographic texture in the growth. Load-controlled compression tests were conducted using a MicroMaterials nano-indenter equipped with a 10 μm flat punch at constant rates from 0.0015 to 0.03 mN/s on EBL grown pillars, and 0.0015 and 0.015 mN/s on FIB-milled pillars. The measured Young’s modulus ranged from 55 to 350 GPa for all pillars, agreeing with values in the literature. EBL grown pillars exhibited stochastic strain-bursts at slow loading rates, attributed to local micro yield events, followed by work hardening. Sharp yield points were also observed and attributed to the gold seed layer de-bonding between the nickel pillar and substrate due to the shear stress associated with end effects that arise from the substrate constraint. The onset of yield ranged from 108 to 1800 MPa, which is greater than bulk nickel, but within values given in the literature. FIB-milled pillars demonstrated stochastic yield behaviour at all loading rates tested, yielding between 320 and 625 MPa. Deformation was apparent at FIB-milled pillar tops, where the smallest cross-sectional area was measured, but still exhibited superior yield strength to bulk nickel. The gallium damage at the outer surface of the pillars likely aids in dislocation nucleation and plasticity, leading to lower yield strengths than for the EBL pillars. Thermal drift, substrate effects, and noise due to vibrations within the indenter system contributed to variance and inconsistency in the data.

Eradication and phenotypic tolerance of Burkholderia cenocepacia biofilms exposed to atmospheric pressure non-thermal plasma.

Chronic lung infection with bacteria from the Burkholderia cepacia complex (BCC), and in particular B. cenocepacia, is associated with significant morbidity and mortality in patients with cystic fibrosis (CF). B. cenocepacia can spread from person to person and exhibits intrinsic broad-spectrum antibiotic resistance. Recently, atmospheric pressure non-thermal plasmas (APNTPs) have gained increasing attention as a novel approach to the prevention and treatment of a variety of hospital-acquired infections. In this study, we evaluated an in-house-designed kHz-driven plasma source for the treatment of biofilms of a number of clinical CF B. cenocepacia isolates. The results demonstrated that APNTP is an effective and efficient tool for the eradication of B. cenocepacia biofilms but that efficacy is highly variable across different isolates. Determination of phenotypic differences between isolates in an attempt to understand variability in plasma tolerance revealed that isolates which are highly tolerant to APNTP typically produce biofilms of greater biomass than their more sensitive counterparts. This indicates a potential role for biofilm matrix components in biofilm tolerance to APNTP exposure. Furthermore, significant isolate-dependent differences in catalase activity in planktonic bacteria positively correlated with phenotypic resistance to APNTP by isolates grown in biofilms.

Numerical Analysis on a Dual-Loop Waste Heat Recovery System Coupled with an ORC for Vehicle Applications

The internal combustion (IC) engines exploits only about 30% of the chemical energy ejected through combustion, whereas the remaining part is rejected by means of cooling system and exhausted gas. Nowadays, a major global concern is finding sustainable solutions for better fuel economy which in turn results in a decrease of carbon dioxide (CO2) emissions. The Waste Heat Recovery (WHR) is one of the most promising techniques to increase the overall efficiency of a vehicle system, allowing the recovery of the heat rejected by the exhaust and cooling systems. In this context, Organic Rankine Cycles (ORCs) are widely recognized as a potential technology to exploit the heat rejected by engines to produce electricity. The aim of the present paper is to investigate a WHR system, designed to collect both coolant and exhausted gas heats, coupled with an ORC cycle for vehicle applications. In particular, a coolant heat exchanger (CLT) allows the heat exchange between the water coolant and the ORC working fluid, whereas the exhausted gas heat is recovered by using a secondary circuit with diathermic oil. By using an in-house numerical model, a wide range of working conditions and ORC design parameters are investigated. In particular, the analyses are focused on the regenerator location inside the ORC circuits. Five organic fluids, working in both subcritical and supercritical conditions, have been selected in order to detect the most suitable configuration in terms of energy and exergy efficiencies.

Multiple training interventions significantly improve reproducibility of PET/CT-based lung cancer radiotherapy target volume delineation using an IAEA study protocol

BACKGROUND AND PURPOSE: To assess the impact of a standardized delineation protocol and training interventions on PET/CT-based target volume delineation (TVD) in NSCLC in a multicenter setting.

MATERIAL AND METHODS: Over a one-year period, 11 pairs, comprised each of a radiation oncologist and nuclear medicine physician with limited experience in PET/CT-based TVD for NSCLC from nine different countries took part in a training program through an International Atomic Energy Agency (IAEA) study (NCT02247713). Teams delineated gross tumor volume of the primary tumor, during and after training interventions, according to a provided delineation protocol. In-house developed software recorded the performed delineations, to allow visual inspection of strategies and to assess delineation accuracy.

RESULTS: Following the first training, overall concordance indices for 3 repetitive cases increased from 0.57±0.07 to 0.66±0.07. The overall mean surface distance between observer and expert contours decreased from -0.40±0.03 cm to -0.01±0.33 cm. After further training overall concordance indices for another 3 repetitive cases further increased from 0.64±0.06 to 0.80±0.05 (p=0.01). Mean surface distances decreased from -0.34±0.16 cm to -0.05±0.20 cm (p=0.01).

CONCLUSION: Multiple training interventions improve PET/CT-based TVD delineation accuracy in NSCLC and reduces interobserver variation.

Continuous statistical modelling for rapid detection of adulteration of extra virgin olive oil using mid infrared and Raman spectroscopic data

The main objective of this work was to develop a novel dimensionality reduction technique as a part of an integrated pattern recognition solution capable of identifying adulterants such as hazelnut oil in extra virgin olive oil at low percentages based on spectroscopic chemical fingerprints. A novel Continuous Locality Preserving Projections (CLPP) technique is proposed which allows the modelling of the continuous nature of the produced in-house admixtures as data series instead of discrete points. The maintenance of the continuous structure of the data manifold enables the better visualisation of this examined classification problem and facilitates the more accurate utilisation of the manifold for detecting the adulterants. The performance of the proposed technique is validated with two different spectroscopic techniques (Raman and Fourier transform infrared, FT-IR). In all cases studied, CLPP accompanied by k-Nearest Neighbors (kNN) algorithm was found to outperform any other state-of-the-art pattern recognition techniques.

Investigation of the effects of flow conditions at rotor inlet on mixed flow turbine performance for automotive applications

Current trends in the automotive industry have placed increased importance on engine downsizing for passenger vehicles. Engine downsizing often results in reduced power output and turbochargers have been relied upon to restore the power output and maintain drivability. As improved power output is required across a wide range of engine operating conditions, it is necessary for the turbocharger to operate effectively at both design and off-design conditions. One off-design condition of considerable importance for turbocharger turbines is low velocity ratio operation, which refers to the combination of high exhaust gas velocity and low turbine rotational speed. Conventional radial flow turbines are constrained to achieve peak efficiency at the relatively high velocity ratio of 0.7, due the requirement to maintain a zero inlet blade angle for structural reasons. Several methods exist to potentially shift turbine peak efficiency to lower velocity ratios. One method is to utilize a mixed flow turbine as an alternative to a radial flow turbine. In addition to radial and circumferential components, the flow entering a mixed flow turbine also has an axial component. This allows the flow to experience a non-zero inlet blade angle, potentially shifting peak efficiency to a lower velocity ratio when compared to an equivalent radial flow turbine.
This study examined the effects of varying the flow conditions at the inlet to a mixed flow turbine and evaluated the subsequent impact on performance. The primary parameters examined were average inlet flow angle, the spanwise distribution of flow angle across the inlet and inlet flow cone angle. The results have indicated that the inlet flow angle significantly influenced the degree of reaction across the rotor and the turbine efficiency. The rotor studied was a custom in-house design based on a state-of-the-art radial flow turbine design. A numerical approach was used as the basis for this investigation and the numerical model has been validated against experimental data obtained from the cold flow turbine test rig at Queen’s University Belfast. The results of the study have provided a useful insight into how the flow conditions at rotor inlet influence the performance of a mixed flow turbine.

The neurotoxin β-N-methylamino-L-alanine (BMAA) : Sources, bioaccumulation and extraction procedures

β-methylamino-L-alanine (BMAA) is a neurotoxin linked to neurodegeneration, which is manifested in the devastating human diseases amyotrophic lateral sclerosis, Alzheimer’s and Parkinson’s disease. This neurotoxin is known to be produced by almost all tested species within the cyanobacterial phylum including free living as well as the symbiotic strains. The global distribution of the BMAA producers ranges from a terrestrial ecosystem on the Island of Guam in the Pacific Ocean to an aquatic ecosystem in Northern Europe, the Baltic Sea, where annually massive surface blooms occur. BMAA had been shown to accumulate in the Baltic Sea food web, with highest levels in the bottom dwelling fish-species as well as in mollusks. One of the aims of this thesis was to test the bottom-dwelling bioaccumulation hypothesis by using a larger number of samples allowing a statistical evaluation. Hence, a large set of fish individuals from the lake Finjasjön, were caught and the BMAA concentrations in different tissues were related to the season of catching, fish gender, total weight and species. The results reveal that fish total weight and fish species were positively correlated with BMAA concentration in the fish brain. Therefore, significantly higher concentrations of BMAA in the brain were detected in plankti-benthivorous fish species and heavier (potentially older) individuals. Another goal was to investigate the potential production of BMAA by other phytoplankton organisms. Therefore, diatom cultures were investigated and confirmed to produce BMAA, even in higher concentrations than cyanobacteria. All diatom cultures studied during this thesis work were show to contain BMAA, as well as one dinoflagellate species. This might imply that the environmental spread of BMAA in aquatic ecosystems is even higher than previously thought. Earlier reports on the concentration of BMAA in different organisms have shown highly variable results and the methods used for quantification have been intensively discussed in the scientific community. In the most recent studies, liquid chromatography-tandem mass spectrometry (LC-MS/MS) has become the instrument of choice, due to its high sensitivity and selectivity. Even so, different studies show quite variable concentrations of BMAA. In this thesis, three of the most common BMAA extraction protocols were evaluated in order to find out if the extraction could be one of the sources of variability. It was found that the method involving precipitation of proteins using trichloroacetic acid gave the best performance, complying with all in-house validation criteria. However, extractions of diatom and cyanobacteria cultures with this validated method and quantified using LC-MS/MS still resulted in variable BMAA concentrations, which suggest that also biological reasons contribute to the discrepancies. The current knowledge on the environmental factors that can induce or reduce BMAA production is still limited. In cyanobacteria, production of BMAA was earlier shown to be negative correlated with nitrogen availability – both in laboratory cultures as well as in natural populations. Based on this observation, it was suggested that in unicellular non-diazotrophic cyanobacteria, BMAA might take part in nitrogen metabolism. In order to find out if BMAA has a similar role in diatoms, BMAA was added to two diatom species in culture, in concentrations corresponding to those earlier found in the diatoms. The results suggest that BMAA might induce a nitrogen starvation signal in diatoms, as was earlier observed in cyanobacteria. However, diatoms recover shortly by the extracellular presence of excreted ammonia. Thus, also in diatoms, BMAA might be involved in the nitrogen balance in the cell.

Ética na pesquisa em Administração

Ethics on scientific research is approached and often discussed in several areas of knowledge connected to health. In the Administration area there are very few studies which approach the topic of ethics on research. The present paper tried to fill in this gap in the production of knowledge about the topic, investigating how the ethical principles found in the literature and in the codes of conduct are noticed and taken into account in Administration research activities developed by acting researchers in Administration Post Graduation Programs. Theoretically speaking, the study was based mainly on the approaches by Creswell (2007) and Bell and Bryman (2007), which discuss the research ethical principles. Methodologically speaking it was all about an exploratory kind of study, with qualitative research approach. Upon data collection, personal interviews were made aiming at its depth and focus groups were formed. The first stage had interviews with four experienced researchers who took part on a teaching and researching event and on the second stage we used the focus group technique. The focus groups were done in four college institutions along with the post graduation programs in Administration in the states of Rio Grande do Norte, Paraíba and Pernambuco, in Brazil. The results suggest the existence of general principles and parameters for the scientific research recommended in the literature and on official resolution. However, in the Administration area, there are only a few recommendations of good practices when it comes to submitting articles for scientific publications but we found no guidance with ethical principles and parameters which cover all the activities in the scientific research and which specifically meet the research particularities in Administration. The main ethical dilemma pointed by the researchers refers to ethical questions which arise at the time of data collection and on disclosing the results. Most researchers do not know the guidelines and the ethical norms on ethics about research that we have in our country neither do they send in their projects to the research ethics committee. When dilemma arises, they decide the ethical question based on their values and common sense. These elements confirm the thesis that the researcher s procedure in the research activities in Administration is predominantly signed by personal values or by common sense and less by ethical principles, whether by not knowing the normative instruments related to ethics or by disagreeing with any disciplining rules on ethical behavior in the research

Fatores de longevidade do programa Central do Cidadão no Rio Grande do Norte

The public management reform in Brazil, since 1995, provoked new experiences in public administration. Among the new models of public service the one-stop shopping has distinguished and was adopted at Rio Grande do Norte with the Citizens Center Program. The one-stop shopping assembles in the same place many public services with appropriate structure, enabled human resources and citizens focus processes. The goal of this research was understand how citizens focus processes help to explain Citizens Center Program s longevity. It was made a case study and the research tools were applied with Citizen Center Programs workers and citizen-users at South Unit of Citizen Center Program placed at Via Direta Mall, Natal. The major contributions for Citizen Center Program s longevity were imputed to Basic Operation Processes. The most spoken features in Citizen Center Program mentioned were quality, efficiency, celerity e personal appearance, what demonstrate concern and care with citizen-users. Worker s personal appearance, accommodation, celerity, politeness and attending capacity planning were high evaluated by citizen-users revealing the wisely choice of use a large quality concept and citizenship concept in public administration. Citizen-users also pointed the necessity of refine and enlarge the communication ways that form an essential mechanism to public citizen focus administration. Not ignoring the policy aspect citizen focus processes were noticed like especial management actions that make easier citizen s activities and public service access, what generate satisfaction to citizen-users. It s possible to conclude that the high level approving evaluation of Citizen Center Program consolidates it an especial public policy that serves citizen s necessities e create appropriate legitimacy conditions of the public policy making harder the choice of ending the policy even in more fragile moments strongly contributing for its longevity

Implementação de software livre na administração pública: um estudo de múltiplos casos no Estado do Rio Grande do Norte

New technologies appear each moment and its use can result in countless benefits for that they directly use and for all the society as well. In this direction, the State also can use the technologies of the information and communication to improve the level of rendering of services to the citizens, to give more quality of life to the society and to optimize the public expense, centering it in the main necessities. For this, it has many research on politics of Electronic Government (e-Gov) and its main effect for the citizen and the society as a whole. This research studies the concept of Electronic Government and wishes to understand the process of implementation of Free Softwares in the agencies of the Direct Administration in the Rio Grande do Norte. Moreover, it deepens the analysis to identify if its implantation results in reduction of cost for the state treasury and intends to identify the Free Software participation in the Administration and the bases of the politics of Electronic Government in this State. Through qualitative interviews with technologies coordinators and managers in 3 State Secretaries it could be raised the ways that come being trod for the Government in order to endow the State with technological capacity. It was perceived that the Rio Grande do Norte still is an immature State in relation to practical of electronic government (e-Gov) and with Free Softwares, where few agencies have factual and viable initiatives in this area. It still lacks of a strategical definition of the paper of Technology and more investments in infrastructure of staff and equipment. One also observed advances as the creation of the normative agency, the CETIC (State Advice of Technology of the Information and Communication), the Managing Plan of Technology that provide a necessary diagnosis with the situation how much Technology in the State and considered diverse goals for the area, the accomplishment of a course of after-graduation for managers of Technology and the training in BrOffice (OppenOffice) for 1120 public servers

Avaliação da eficiência dos programas de pós-graduação acadêmicos em Administração, Contabilidade e Turismo

The Triennial Evaluation of Coordination for the Improvement of Higher Education Personnel (CAPES) is made according to several indicators, divided into several issues and items, and their weights. In these it is evident the importance of scientific periodicals. This study aims to evaluate the relative efficiency of post-graduate students in Business Administration, Accounting and tourism evaluated by CAPES in Brazil. The methodology used the data envelopment analysis - DEA (Data Envelopment Analysis). The data were obtained from the site and organized by the CAPES Qualis score. The analysis was performed by the DEA variable returns to scale, product-oriented (BCC-O), with data from the three-year periods 2004-2006 and 2007-2009. Among the main results are the average increase significantly the relative efficiency of the programs in the period 2007-2009 compared to 2004-2006 period, the highest average efficiency of programs linked to public institutions in relation to private, doctoral programs with the present average efficiency sharply higher than those only with masters, and senior programs in general were more efficient. There is also moderate and significant correlation between the efficiency scores and concepts CAPES. The Malmquist index analysis showed that more than 85% of programs had increased productivity. It is noteworthy that the main effect that influences the increase of the Malmquist index is the displacement of the border (Frontier-shift)

On precise three-dimensional environment modeling via UAV-based photogrammetric systems

Abstract : Images acquired from unmanned aerial vehicles (UAVs) can provide data with unprecedented spatial and temporal resolution for three-dimensional (3D) modeling. Solutions developed for this purpose are mainly operating based on photogrammetry concepts, namely UAV-Photogrammetry Systems (UAV-PS). Such systems are used in applications where both geospatial and visual information of the environment is required. These applications include, but are not limited to, natural resource management such as precision agriculture, military and police-related services such as traffic-law enforcement, precision engineering such as infrastructure inspection, and health services such as epidemic emergency management. UAV-photogrammetry systems can be differentiated based on their spatial characteristics in terms of accuracy and resolution. That is some applications, such as precision engineering, require high-resolution and high-accuracy information of the environment (e.g. 3D modeling with less than one centimeter accuracy and resolution). In other applications, lower levels of accuracy might be sufficient, (e.g. wildlife management needing few decimeters of resolution). However, even in those applications, the specific characteristics of UAV-PSs should be well considered in the steps of both system development and application in order to yield satisfying results. In this regard, this thesis presents a comprehensive review of the applications of unmanned aerial imagery, where the objective was to determine the challenges that remote-sensing applications of UAV systems currently face. This review also allowed recognizing the specific characteristics and requirements of UAV-PSs, which are mostly ignored or not thoroughly assessed in recent studies. Accordingly, the focus of the first part of this thesis is on exploring the methodological and experimental aspects of implementing a UAV-PS. The developed system was extensively evaluated for precise modeling of an open-pit gravel mine and performing volumetric-change measurements. This application was selected for two main reasons. Firstly, this case study provided a challenging environment for 3D modeling, in terms of scale changes, terrain relief variations as well as structure and texture diversities. Secondly, open-pit-mine monitoring demands high levels of accuracy, which justifies our efforts to improve the developed UAV-PS to its maximum capacities. The hardware of the system consisted of an electric-powered helicopter, a high-resolution digital camera, and an inertial navigation system. The software of the system included the in-house programs specifically designed for camera calibration, platform calibration, system integration, onboard data acquisition, flight planning and ground control point (GCP) detection. The detailed features of the system are discussed in the thesis, and solutions are proposed in order to enhance the system and its photogrammetric outputs. The accuracy of the results was evaluated under various mapping conditions, including direct georeferencing and indirect georeferencing with different numbers, distributions and types of ground control points. Additionally, the effects of imaging configuration and network stability on modeling accuracy were assessed. The second part of this thesis concentrates on improving the techniques of sparse and dense reconstruction. The proposed solutions are alternatives to traditional aerial photogrammetry techniques, properly adapted to specific characteristics of unmanned, low-altitude imagery. Firstly, a method was developed for robust sparse matching and epipolar-geometry estimation. The main achievement of this method was its capacity to handle a very high percentage of outliers (errors among corresponding points) with remarkable computational efficiency (compared to the state-of-the-art techniques). Secondly, a block bundle adjustment (BBA) strategy was proposed based on the integration of intrinsic camera calibration parameters as pseudo-observations to Gauss-Helmert model. The principal advantage of this strategy was controlling the adverse effect of unstable imaging networks and noisy image observations on the accuracy of self-calibration. The sparse implementation of this strategy was also performed, which allowed its application to data sets containing a lot of tie points. Finally, the concepts of intrinsic curves were revisited for dense stereo matching. The proposed technique could achieve a high level of accuracy and efficiency by searching only through a small fraction of the whole disparity search space as well as internally handling occlusions and matching ambiguities. These photogrammetric solutions were extensively tested using synthetic data, close-range images and the images acquired from the gravel-pit mine. Achieving absolute 3D mapping accuracy of 11±7 mm illustrated the success of this system for high-precision modeling of the environment.

Práticas interdisciplinares no ensino superior: a experiência do curso de graduação em administração da UNAMA - Pará

This work addresses the study of interdisciplinarity in higher administration education, a topic of great relevance in the present context, due to guidelines issued by Ministry of Education through the National Curriculum Guidelines -NCGs for undergraduate courses in Management. The attention on the subject emerges from the gained experience of a researcher and teacher working as manager of an undergraduate course in Business Administration who set up interdisciplinarity through interdisciplinary projects in a management course pedagogical project at a private university in State of Pará/Brazil. The work rebuilds and reports experiences, and studies the practice of lecturers involved in those interdisciplinary actions. The study aimed to identify changes in pedagogical practices of teachers involved in the searched interdisciplinary experience. To address the questions that directed the work and achieve proposed objectives, from a qualitative approach, a significant bibliographical and documentary work was conducted on the topic. In the survey carried out on secondary sources such as publications of major authors and scientific papers reporting interdisciplinary experiences in higher administration education, it was found that interdisciplinarity for its ambiguous character is still poorly understood by teachers, and reports on its application in administration teaching are incipient. This study also used data collected from primary sources, from dialogues through interviews with educational fellows - teachers and officers of the institution that served as locus of the research, who had the opportunity to experience the studied interdisciplinary experience. Data were processed and analyzed using content analysis technique. Research results showed that teachers of the institution of research have a good understanding of meaning of interdisciplinarity as a link between disciplines; it was also found substantial evidence of changes in teaching practices and actions of such teachers based on their participation in interdisciplinary projects. Although the experience studied can be considered innovative and challenging, much needs to be done in the course management for achievement of interdisciplinary actions in the course, particularly regarding to the removal of institutional, methodological, psychosocial, epistemological obstacles in operationalizing interdisciplinary practices, with emphasis on the need of a process of continuous and specific training aiming at developing skills for interdisciplinary acting, to the extent that these education professionals do not perceive themselves able to act as interdisciplinary lecturers

Comparison of three algorithms for nonlinear metal cutting problems

This paper compares three alternative numerical algorithms applied to a nonlinear metal cutting problem. One algorithm is based on an explicit method and the other two are implicit. Domain decomposition (DD) is used to break the original domain into subdomains, each containing a properly connected, well-formulated and continuous subproblem. The serial version of the explicit algorithm is implemented in FORTRAN and its parallel version uses MPI (Message Passing Interface) calls. One implicit algorithm is implemented by coupling the state-of-the-art PETSc (Portable, Extensible Toolkit for Scientific Computation) software with in-house software in order to solve the subproblems. The second implicit algorithm is implemented completely within PETSc. PETSc uses MPI as the underlying communication library. Finally, a 2D example is used to test the algorithms and various comparisons are made.

O valor do empreendedorismo na Universidade

O objeto central deste estudo são os significados que os alunos do curso de Administração atribuem aos valores do ensino do Empreendedorismo em sua formação acadêmica, delineado à luz dos pressupostos teórico-metodológicos da psicologia de Vygotsky e alicerçado com a pesquisa efetuada durante o ano de 2015, com um cariz qualitativo. A proposta metodológica da pesquisa contempla a triangulação de procedimentos, a saber: questionários, entrevistas e grupo focal. Participaram do trabalho de entrevista e grupo focal um total de 14 alunos somados aos 109 que integraram o procedimento metodológico em forma de questionário. Todos os alunos participantes cursavam, no momento da pesquisa, o sexto e sétimos períodos do curso de administração. Como ponto de partida dos núcleos de significação deste trabalho, procurou-se verificar as possíveis formas de apreensão do conhecimento acadêmico com vistas à ação empreendedora dos sujeitos pesquisados, buscando estudá-los nas seguintes dimensões: quem são os alunos universitários; como é a sua vida acadêmica; de que maneira os estudantes constroem e significam a importância do conhecimento empreendedor para a construção de seu caminho na busca de seus objetivos e sonhos. O estudo permite defender a seguinte tese central: os significados atribuídos pelos alunos do Curso de Administração à sua formação empreendedora. A apreensão do conhecimento é significada com responsabilidade, compromisso, persistência e confiança em si mesmos. São pessoas que possuem esperança de ter um futuro promissor, de realizar seus objetivos, coroados de fortes sentimentos advindos de suas vivências, compreendendo o Empreendedorismo como forma de desenvolvimento social. A partir dessa tese central, outra se destacou por ter sido considerada a base de todo o processo empreendedor delineado pelos sujeitos pesquisados: a família. Esta instituição central declarou-se ser a base geradora para a sua motivação na construção de seus caminhos, rumo à conquista dos sonhos e anseios desejados. É ponto de destaque e elo firme em suprir uma das características do empreendedor, que é ter um “modelo”, aquele que o inspira, que o influencia para seguir em frente em sua meta. Outra tese que emergiu neste estudo foi o distanciamento da instituição de ensino das empresas, fato uníssono nas falas dos sujeitos pesquisados. A carência da prática no curso de administração foi sentida e evocada como um óbice a ser resolvido.