Stochastic modeling of the thermal and catalytic degradation of polyethylene using simultaneous DSC/TG analysis

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

The effects of land-use development policies on forest management

This paper develops a model of a forest owner operating in an open-city environment, where the rent for developed land is increasing concave in nearby preserved open space and is rising over time reflecting an upward trend in households’ income. Thus, our model creates the possibility of switching from forestry to residential use at some point in the future. In addition it allows the optimal harvest length to vary over time even if stumpage prices and regeneration costs remain constant. Within this framework we examine how adjacent preserved open space and alternative development constraints affect the private landowner´s decisions. We find that in the presence of rising income, preserved open space hastens regeneration and conversion cuts but leads to lower density development of nearby unzoned parcels due to indirect dynamic effects. We also find that both a binding development moratorium and a binding minimum-lot-size policy can postpone regeneration and conversion cut dates and thus help to protect open space even if only temporarily. However, the policies do not have the same effects on development density of converted forestland. While the former leads to high-density development, the latter encourages low-density development.

Relationship between antibiotic consumption, oropharyngeal colonization, and ventilator-associated pneumonia by Staphylococcus aureus in an intensive care unit of a Brazilian teaching hospital

INTRODUCTION: his study evaluated the consumption of major classes of antibiotics, the colonization of the oropharynx of patients on mechanical ventilation, and the risk of ventilator-associated pneumonia (VAP) caused by Staphylococcus aureus in an intensive care unit for adults. METHODS: A case-control study was carried out using colonized patients (cases) by oxacillin-resistant S. aureus (ORSA) and (controls) oxacillin-sensitive S. aureus (OSSA) from May 2009 to August 2010. The occurrence of VAP by S. aureus was also evaluated in the same period. Antibiotic consumption was expressed as the number of defined daily doses (DDD)/1,000 patient-days for glycopeptides, carbapenems, and extended-spectrum cephalosporins. RESULTS: Three hundred forty-six (56.1%) patients underwent mechanical ventilation with a frequency of oropharyngeal colonization of 36.4%, corresponding to 63.5% for ORSA and 36.5% for OSSA. The risk of illness for this organism was significant (p<0.05), regardless of whether colonization/infection was by ORSA or OSSA. The consumption of antibiotics was high, mainly for broad-spectrum cephalosporins (551.26 DDDs/1,000 patient-days). The high density of use of glycopeptides (269.56 DDDs/1,000 patient-days) was related to colonization by ORSA (Pearson r=0.57/p=0.02). Additionally, age >60 years, previous antibiotic therapy, and previous use of carbapenems were statistically significant by multivariate analysis. CONCLUSIONS: There was a significant relationship between the colonization of the oropharyngeal mucosa and the risk of VAP by both phenotypes. The use of glycopeptides was related to colonization by ORSA.

Clinical and laboratory characteristics associated with dyslipidemia and liver steatosis in chronic HBV carriers

Introduction Chronic hepatitis B virus (HBV) infection and liver steatosis (LS) are the most common causes of chronic liver disease, and their coexistence is frequently observed in clinical practice. Although metabolic syndrome is the main cause of LS, it has not been associated with HBV infection. The aims of this study were to describe the lipid profile and prevalence of LS among HBV carriers and to identify the characteristics associated with LS in this group. Methods This retrospective cross-sectional study included hepatitis B surface antigen (HBsAg)-positive patients evaluated during 2011 and 2012. Results Of the 83 patients included, the mean age was 46.4±12.5 years, 53% were men, and 9.1% were hepatitis B e antigen (HBeAg) -positive. These patients exhibited the following lipid profile: total cholesterol = 175.4±38.8mg/dL, low-density lipoprotein (LDL) = 113.0±32.7mg/dL, and triglycerides = 91.1±45.2mg/dL. Their fasting glucose was 95.3±14.5g/dL, and fasting insulin was 6.1±5.9µIU/mL. Liver steatosis was observed on abdominal ultrasound in 11.3% of individuals. Factors associated with the presence of LS included higher levels of total cholesterol, prothrombin activity, fasting insulin, and body mass index (BMI) as well as lower levels of aspartate aminotransferase (AST). Conclusions These findings suggest that LS in patients with chronic HBV appears to be a consequence of metabolic alterations and insulin action rather than of viral factors.

Analysis of the prevalence of dyslipidemia in individuals with HIV and its association with antiretroviral therapy

IntroductionAntiretroviral therapy (ART) has been used to treat large numbers of patients living with human immunodeficiency virus (HIV) infection. Lipid disorders are often observed in these patients, and include elevations in total cholesterol (TC) and triglycerides (TG).MethodsA cross-sectional study was performed using 333 patient records from the Regional Hospital of São José Doutor Homero de Miranda Gomes (HRSJHMG). The study population consisted of patients with HIV who were under medical follow up, either on or off drug treatment. The data were entered into Excel and exported to SPSS 16.0 for analysis using chi-square testing. We used prevalence ratios as the measure of association.ResultsLipid abnormalities were observed in 78.9% of individuals who received ART. Of the 308 subjects on ART, 59.1%, 41.9%, and 33.1% had TG, TC and low-density lipoprotein (LDL) abnormalities, respectively. The prevalence of LDL changes was 2.57-fold higher in individuals who had been using ART for more than 12 months, compared to those using ART for 6 to 12 months.ConclusionsHIV patients showed a significant increase in the association between TC and TG levels and the use of ART. In particular, changes in TC, LDL and TG were greater in individuals who had received ART for over more than 12 months.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Forest biomass and wood consumption In the lower course of the Amazon: a case study of rhe Urubueua Island

Várzea and terra-firme forests in the lower course of the Amazon were compared in terms of forest structure, wood volume increments and forest biomass. The wood volume of várzea forests was smaller than that of terra-firme forests, particularly when severe human intervention such as the cultivation of açaí palm occurred. The difference was even greater in the forest weight comparison because of the lower wood density of várzea trees. These trees are not directly influenced by water stress during the dry season, while late wood with a high density is formed in the terra-firme trees. The annual forest disappearance area due to firewood for tile factories was estimated to be about 276 ha on the island investigated, which had an area of 36,200 ha. Assuming that the forests are rotatively cultivated every 25 to 30 years, the total deforestation area is 6,870-6,948 ha in 25 years and 8,244~8,337 ha in 30 years. This result means that the balance between forest biomass and utilization is not in crisis, however, this balance might be lost as long as substitutive energy such as electricity is not supplied.

Effect of incorporating different waste materials in bitumen

The increasing environmental concern about waste materials and the necessity of improving the performance of asphalt mixtures prompted the study of incorporating different waste materials in conventional bitumen. The reuse of waste materials can present benefits at an environmental and economic level, and some wastes can be used to improve the pavement performance. Thus, the purpose of this study is to evaluate the incorporation of different waste materials in bitumen, namely waste motor oil and different polymers. In order to accomplish this goal, 10% of waste motor oil and 5% of polymers (high density polyethylene, crumb rubber and styrene-butadiene-styrene) were added to a conventional bitumen and the resulting modified bitumens were characterized through basic and rheological tests. From this work, it can be concluded that the incorporation of different waste materials improve some important properties of the conventional bitumen. Such improvements might indicate a good behaviour at medium/high temperatures and an increase of fatigue and rutting resistance. Therefore, these modified bitumens with waste materials can contribute to a sustainable development of road paving industry due to their performance and environmental advantages.

Gd2O3: Eu Nanoparticle-Based Poly(vinylidene fluoride) Composites for Indirect X-ray Detection

Polymer based scintillator composites have been fabricated by combining poly(vinylidene fluoride) (PVDF) and Gd2O3:Eu nanoparticles (50nm). PVDF has been used since it is a flexible and stable binder matrix and highly resistance to thermal and light deterioration. Gd2O3:Eu has been selected as scintillator material due to its wide band gap, high density and suitable visible light yield. The structural, mechanical, thermal and electrical characteristics of the composites were studied as a function of filler content, together with their performance as scintillator material. The introduction of Gd2O3:Eu nanoparticles into the PVDF matrix does not influence the morphology of the polymer or the degree of crystallinity. On the other hand, an increase of the Young´s modulus with respect to PVDF matrix is observed for filler contents of 0.1-0.75 wt.%. The introduction of Gd2O3:Eu into the PVDF matrix increases dielectric constant and DC electrical conductivity as well as the visible light yield in the nanocomposite, being this increase dependent upon Gd2O3:Eu content and X-ray input power. In this way, Gd2O3:Eu/PVDF composites shows suitable characteristics to be used as X-ray radiation transducers, in particular for large area applications.

Gd2O3: Eu3+/PPO/POPOP/PS composites for digital imaging radiation detectors

Polymer based scintillator composites have been produced by combining polystyrene (PS) and Gd2O3:Eu3+ scintillator nanoparticles. Polystyrene has been used since it is a flexible and stable binder matrix, resistant to thermal and light deterioration and with suitable optical properties. Gd2O3:Eu3+ has been selected as scintillator material due to its wide band gap, high density and visible light yield. The optical, thermal and electrical characteristics of the composites were studied as a function of filler content, together with their performance as scintillator material. Additionally 1wt.% of 2,5 dipheniloxazol (PPO) and 0.01wt.% of (1,4-bis(2-(5-phenioxazolil))-benzol (POPOP) were introduced in the polymer matrix in order to strongly improve light yield, i.e. the measured intensity of the output visible radiation, under X-ray irradiation. Whereas increasing scintillator filler concentration (from 0.25wt.% to 7.5wt.%) increases scintillator light yield, decreases the optical transparency of the composite. The addition of PPO and POPOP, strongly increased the overall 2 transduction performance of the composite due to specific absorption and re-emission processes. It is thus shown that Gd2O3:Eu3+/PPO/POPOP/PS composites in 0.25 wt.% of scintillator content with fluorescence molecules is suitable for the development of innovate large area X-ray radiation detectors with huge demand from the industries.

Tribunais nacionais e tutela jurisdicional efetiva: da cooperação à integração judiciária no contencioso da união europeia

Tese de Doutoramento em Ciências Jurídicas (área de especialização em Ciências Jurídicas Públicas).

Estudo de betumes modificados recuperados de misturas produzidas pelo método húmido e pelo método seco

Dissertação de mestrado integrado em Engenharia Civil

Dynamic wet etching of silicon through isopropanol alcohol evaporation

In this paper, Isopropanol (IPA) availability during the anisotropic etching of silicon in Potassium Hydroxide (KOH) solutions was investigated. Squares of 8 to 40 m were patterned to (100) oriented silicon wafers through DWL (Direct Writing Laser) photolithography. The wet etching process was performed inside an open HDPE (High Density Polyethylene) flask with ultrasonic agitation. IPA volume and evaporation was studied in a dynamic etching process, and subsequent influence on the silicon etching was inspected. For the tested conditions, evaporation rates for water vapor and IPA were determined as approximately 0.0417 mL/min and 0.175 mL/min, respectively. Results demonstrate that IPA availability, and not concentration, plays an important role in the definition of the final structure. Transversal SEM (Scanning Electron Microscopy) analysis demonstrates a correlation between microloading effects (as a consequence of structure spacing) and the angle formed towards the (100) plane.

Macroinvertebrates under stochastic hydrological disturbance in Cerrado streams of Central Brazil

In the Cerrado vegetation, where the seasonal is well defined, rainfall has an important role in controlling the flow of streams and consequently on the structure of macroinvertebrates community. Despite the effects of rainfall associated with seasonality are well studied, little is known about the effects of stochastic rains on the community. In the present study we evaluated the structure and faunal composition of four first-order streams in Central Brazil during the dry season in two years, with and without stochastic rains. Community sampling was done by colonization of boards of high density polyethylene (HDPE), removed after one month submerged in streams. Analysis of Variance (ANOVA) performed indicated no difference in rarefied richness between the two periods, different from numeric density of organisms that was higher in the period without disturbance; moreover, the Detrended Correspondence Analysis (DCA) revealed differences in faunal composition between the two periods. Our results indicate that stochastic rainfall is an important factor in structuring the macroinvertebrates community in studied region.

First records of Freshwater Bivalves of Ilha Grande National Park, Paraná, Brazil

The Ilha Grande National Park, Paraná, Brazil, is located in the Upper Paraná River and has characteristics typical of a floodplains. This protected area includes lagoons connected and disconnected to the Paraná River, although the latter also connect during periods of high water level, thus composing a heterogeneous group of lacustrine environments. The enormous potential the flora and fauna diversities are still little known to the region, as can be seen through benthic invertebrates, inclunding bivalves mollusks. The granulometric composition of these floodplain lagoons was formed mainly by mud and very fine sand. Furthermore, organic matter composition was predominantly of fine particulate. The other abiotic factors differed from lagoons located within the island of the park to those located in the left margin of Paraná River. The results demonstrated the importance of abiotic factors such as the physical composition of granulometric texture, organic matter and macrophyte banks, to the establishment of bivalves in these floodplain lagoons. We recorded bivalves of Pisidium (native), Diplodon (native), and Corbicula (invasive). The highest values of Diplodon sp. density were observed at São João/C lake, for Pisidium sterkianum (Pilsbry, 1897) at São João/M lake, and to Jatobá/C lagoon with high density of invasive species Corbicula fluminea (Müller, 1774). This study to obtain conduct the first records of freshwater bivalves in floodplains lagoon in the Ilha Grande National Park, and provides contributions to better understanding the ecology of these mollusks. The recording of native species in the region of Upper Paraná River floodplain after a lomg period without new records, demonstrated the importance of protecting the lagoons of the Ilha Grande National Park as they can be a possible refuge to some species of native freshwater bivalves.