Organ-focused mutual information for nonrigid multimodal registration of liver CT and Gd–EOB–DTPA-enhanced MRI

Accurate detection of liver lesions is of great importance in hepatic surgery planning. Recent studies have shown that the detection rate of liver lesions is significantly higher in gadoxetic acid-enhanced magnetic resonance imaging (Gd–EOB–DTPA-enhanced MRI) than in contrast-enhanced portal-phase computed tomography (CT); however, the latter remains essential because of its high specificity, good performance in estimating liver volumes and better vessel visibility. To characterize liver lesions using both the above image modalities, we propose a multimodal nonrigid registration framework using organ-focused mutual information (OF-MI). This proposal tries to improve mutual information (MI) based registration by adding spatial information, benefiting from the availability of expert liver segmentation in clinical protocols. The incorporation of an additional information channel containing liver segmentation information was studied. A dataset of real clinical images and simulated images was used in the validation process. A Gd–EOB–DTPA-enhanced MRI simulation framework is presented. To evaluate results, warping index errors were calculated for the simulated data, and landmark-based and surface-based errors were calculated for the real data. An improvement of the registration accuracy for OF-MI as compared with MI was found for both simulated and real datasets. Statistical significance of the difference was tested and confirmed in the simulated dataset (p < 0.01).

Novel fast random search clustering approach for mixing matrix identification in MIMO linear blind inverse problems with sparse inputs

In this paper we propose a novel fast random search clustering (RSC) algorithm for mixing matrix identification in multiple input multiple output (MIMO) linear blind inverse problems with sparse inputs. The proposed approach is based on the clustering of the observations around the directions given by the columns of the mixing matrix that occurs typically for sparse inputs. Exploiting this fact, the RSC algorithm proceeds by parameterizing the mixing matrix using hyperspherical coordinates, randomly selecting candidate basis vectors (i.e. clustering directions) from the observations, and accepting or rejecting them according to a binary hypothesis test based on the Neyman–Pearson criterion. The RSC algorithm is not tailored to any specific distribution for the sources, can deal with an arbitrary number of inputs and outputs (thus solving the difficult under-determined problem), and is applicable to both instantaneous and convolutive mixtures. Extensive simulations for synthetic and real data with different number of inputs and outputs, data size, sparsity factors of the inputs and signal to noise ratios confirm the good performance of the proposed approach under moderate/high signal to noise ratios. RESUMEN. Método de separación ciega de fuentes para señales dispersas basado en la identificación de la matriz de mezcla mediante técnicas de "clustering" aleatorio.

Sparse spectral analysis of atrial fibrillation electrograms

Atrial fibrillation (AF) is a common heart disorder. One of the most prominent hypothesis about its initiation and maintenance considers multiple uncoordinated activation foci inside the atrium. However, the implicit assumption behind all the signal processing techniques used for AF, such as dominant frequency and organization analysis, is the existence of a single regular component in the observed signals. In this paper we take into account the existence of multiple foci, performing a spectral analysis to detect their number and frequencies. In order to obtain a cleaner signal on which the spectral analysis can be performed, we introduce sparsity-aware learning techniques to infer the spike trains corresponding to the activations. The good performance of the proposed algorithm is demonstrated both on synthetic and real data. RESUMEN. Algoritmo basado en técnicas de regresión dispersa para la extracción de las señales cardiacas en pacientes con fibrilación atrial (AF).

Supervised classification of minimally invasive surgery psychomotor competence based on instruments motion analysis

Background Objective assessment of psychomotor skills has become an important challenge in the training of minimally invasive surgical (MIS) techniques. Currently, no gold standard defining surgical competence exists for classifying residents according to their surgical skills. Supervised classification has been proposed as a means for objectively establishing competence thresholds in psychomotor skills evaluation. This report presents a study comparing three classification methods for establishing their validity in a set of tasks for basic skills’ assessment. Methods Linear discriminant analysis (LDA), support vector machines (SVM), and adaptive neuro-fuzzy inference systems (ANFIS) were used. A total of 42 participants, divided into an experienced group (4 expert surgeons and 14 residents with >10 laparoscopic surgeries performed) and a nonexperienced group (16 students and 8 residents with <10 laparoscopic surgeries performed), performed three box trainer tasks validated for assessment of MIS psychomotor skills. Instrument movements were captured using the TrEndo tracking system, and nine motion analysis parameters (MAPs) were analyzed. The performance of the classifiers was measured by leave-one-out cross-validation using the scores obtained by the participants. Results The mean accuracy performances of the classifiers were 71 % (LDA), 78.2 % (SVM), and 71.7 % (ANFIS). No statistically significant differences in the performance were identified between the classifiers. Conclusions The three proposed classifiers showed good performance in the discrimination of skills, especially when information from all MAPs and tasks combined were considered. A correlation between the surgeons’ previous experience and their execution of the tasks could be ascertained from results. However, misclassifications across all the classifiers could imply the existence of other factors influencing psychomotor competence.

Adapting a speech into sign language translation system to a new domain

This paper presents a methodology for adapting an advanced communication system for deaf people in a new domain. This methodology is a user-centered design approach consisting of four main steps: requirement analysis, parallel corpus generation, technology adaptation to the new domain, and finally, system evaluation. In this paper, the new considered domain has been the dialogues in a hotel reception. With this methodology, it was possible to develop the system in a few months, obtaining very good performance: good speech recognition and translation rates (around 90%) with small processing times.

Temperature controlled light-emitting diode lamp for photovoltaic rural applications

In recent years, interest in light-emitting diode (LED) lighting has been growing because of its high efficacy, lifetime and ruggedness. This paper proposes a better adaptation of LED lamps to the technical requirements of photovoltaic lighting domestic systems, whose main quality criteria are reliability and that behave as voltage power supplies. As the key element of reliability in LED lamps is temperature, a solution is proposed for driving LED lamps using voltage sources, such as photovoltaic system batteries, with a control architecture based on pulse width modulation signal that regulates the current applied according to the LED lamp temperature. A prototype of the LED lamp has been implemented and tested to show its good performance at different temperatures and at different battery voltages.

Prototype of EN 301 549 Decision tree

The new European Standard EN 301 549 “Accessibility requirements suitable for public procurement of ICT products and services in Europe” is the response by CEN, CENELEC and ETSI to the European Commission’s Mandate 376. Today, ICT products and services are converging, and the boundaries between product categories are being constantly blurred. For that reason EN 301 549 has been drafted using a feature-based approach, instead of being based on product categories. The result is a standard that can be applied to any ICT product and service, by identifying applicable requirements depending on the features of the ICT. This demonstration presents ongoing work at the research group CETTICO of the Technical University of Madrid. CETTICO is developing a workgroup-based support tool where teams of people can annotate the result of performing a conformity assessment of a given ICT product or service according to the requirements of the EN. One of the functions of the tool is creating evaluation projects. During that task the user defines the features of the corresponding ICT product or service by answering questions presented by the tool. As a result of this process, the tool will create a list of applicable requirements and recommendations.

Efficiency analysis of information technology and online social networks management : an integrated DEA-Model assessment

This paper analyses the relationship between productive efficiency and online-social-networks (OSN) in Spanish telecommunications firms. A data-envelopment-analysis (DEA) is used and several indicators of business ?social Media? activities are incorporated. A super-efficiency analysis and bootstrapping techniques are performed to increase the model?s robustness and accuracy. Then, a logistic regression model is applied to characterise factors and drivers of good performance in OSN. Results reveal the company?s ability to absorb and utilise OSNs as a key factor in improving the productive efficiency. This paper presents a model for assessing the strategic performance of the presence and activity in OSN.

Diseño de un Procesador de Membranas Paralelo para los Sistemas P de Transición

La computación con membranas surge como una alternativa a la computación tradicional. Dentro de este campo se sitúan los denominados Sistemas P de Transición que se basan en la existencia de regiones que contienen recursos y reglas que hacen evolucionar a dichos recursos para poder llevar a cada una de las regiones a una nueva situación denominada configuración. La sucesión de las diferentes configuraciones conforman la computación. En este campo, el Grupo de Computación Natural de la Universidad Politécnica de Madrid lleva a cabo numerosas investigaciones al amparo de las cuales se han publicado numerosos artículos y realizado varias tesis doctorales. Las principales vías de investigación han sido, hasta el momento, el estudio del modelo teórico sobre el que se definen los Sistemas P, el estudio de los algoritmos que se utilizan para la aplicación de las reglas de evolución en las regiones, el diseño de nuevas arquitecturas que mejoren las comunicaciones entre las diferentes membranas (regiones) que componen el sistema y la implantación de estos sistemas en dispositivos hardware que pudiesen definir futuras máquinas basadas en este modelo. Dentro de este último campo, es decir, dentro del objetivo de construir finalmente máquinas que puedan llevar a cabo la funcionalidad de la computación con Sistemas P, la presente tesis doctoral se centra en el diseño de dos procesadores paralelos que, aplicando variantes de algoritmos existentes, favorezcan el crecimiento en el nivel de intra-paralelismo a la hora de aplicar las reglas. El diseño y creación de ambos procesadores presentan novedosas aportaciones al entorno de investigación de los Sistemas P de Transición en tanto en cuanto se utilizan conceptos que aunque previamente definidos de manera teórica, no habían sido introducidos en el hardware diseñado para estos sistemas. Así, los dos procesadores mantienen las siguientes características: - Presentan un alto rendimiento en la fase de aplicación de reglas, manteniendo por otro lado una flexibilidad y escalabilidad medias que son dependientes de la tecnología final sobre la que se sinteticen dichos procesadores. - Presentan un alto nivel de intra-paralelismo en las regiones al permitir la aplicación simultánea de reglas. - Tienen carácter universal en tanto en cuanto no depende del carácter de las reglas que componen el Sistema P. - Tienen un comportamiento indeterminista que es inherente a la propia naturaleza de estos sistemas. El primero de los circuitos utiliza el conjunto potencia del conjunto de reglas de aplicación así como el concepto de máxima aplicabilidad para favorecer el intra-paralelismo y el segundo incluye, además, el concepto de dominio de aplicabilidad para determinar el conjunto de reglas que son aplicables en cada momento con los recursos existentes. Ambos procesadores se diseñan y se prueban mediante herramientas de diseño electrónico y se preparan para ser sintetizados sobre FPGAs. ABSTRACT Membrane computing appears as an alternative to traditional computing. P Systems are placed inside this field and they are based upon the existence of regions called “membranes” that contain resources and rules that describe how the resources may vary to take each of these regions to a new situation called "configuration". Successive configurations conform computation. Inside this field, the Natural Computing Group of the Universidad Politécnica of Madrid develops a large number of works and researches that provide a lot of papers and some doctoral theses. Main research lines have been, by the moment, the study of the theoretical model over which Transition P Systems are defined, the study of the algorithms that are used for the evolution rules application in the regions, the design of new architectures that may improve communication among the different membranes (regions) that compose the whole system and the implementation of such systems over hardware devices that may define machines based upon this new model. Within this last research field, this is, within the objective of finally building machines that may accomplish the functionality of computation with P Systems, the present thesis is centered on the design of two parallel processors that, applying several variants of some known algorithms, improve the level of the internal parallelism at the evolution rule application phase. Design and creation of both processors present innovations to the field of Transition P Systems research because they use concepts that, even being known before, were never used for circuits that implement the applying phase of evolution rules. So, both processors present the following characteristics: - They present a very high performance during the application rule phase, keeping, on the other hand, a level of flexibility and scalability that, even known it is not very high, it seems to be acceptable. - They present a very high level of internal parallelism inside the regions, allowing several rule to be applied at the same time. - They present a universal character meaning this that they are not dependent upon the active rules that compose the P System. - They have a non-deterministic behavior that is inherent to this systems nature. The first processor uses the concept of "power set of the application rule set" and the concept of "maximal application" number to improve parallelism, and the second one includes, besides the previous ones, the concept of "applicability domain" to determine the set of rules that may be applied in each moment with the existing resources.. Both processors are designed and tested with the design software by Altera Corporation and they are ready to be synthetized over FPGAs.

Contribuciones al análisis de problemas supercomplejos de toma de decisiones

Los fundamentos de la Teoría de la Decisión Bayesiana proporcionan un marco coherente en el que se pueden resolver los problemas de toma de decisiones. La creciente disponibilidad de ordenadores potentes está llevando a tratar problemas cada vez más complejos con numerosas fuentes de incertidumbre multidimensionales; varios objetivos conflictivos; preferencias, metas y creencias cambiantes en el tiempo y distintos grupos afectados por las decisiones. Estos factores, a su vez, exigen mejores herramientas de representación de problemas; imponen fuertes restricciones cognitivas sobre los decisores y conllevan difíciles problemas computacionales. Esta tesis tratará estos tres aspectos. En el Capítulo 1, proporcionamos una revisión crítica de los principales métodos gráficos de representación y resolución de problemas, concluyendo con algunas recomendaciones fundamentales y generalizaciones. Nuestro segundo comentario nos lleva a estudiar tales métodos cuando sólo disponemos de información parcial sobre las preferencias y creencias del decisor. En el Capítulo 2, estudiamos este problema cuando empleamos diagramas de influencia (DI). Damos un algoritmo para calcular las soluciones no dominadas en un DI y analizamos varios conceptos de solución ad hoc. El último aspecto se estudia en los Capítulos 3 y 4. Motivado por una aplicación de gestión de embalses, introducimos un método heurístico para resolver problemas de decisión secuenciales. Como muestra resultados muy buenos, extendemos la idea a problemas secuenciales generales y cuantificamos su bondad. Exploramos después en varias direcciones la aplicación de métodos de simulación al Análisis de Decisiones. Introducimos primero métodos de Monte Cario para aproximar el conjunto no dominado en problemas continuos. Después, proporcionamos un método de Monte Cario basado en cadenas de Markov para problemas con información completa con estructura general: las decisiones y las variables aleatorias pueden ser continuas, y la función de utilidad puede ser arbitraria. Nuestro esquema es aplicable a muchos problemas modelizados como DI. Finalizamos con un capítulo de conclusiones y problemas abiertos.---ABSTRACT---The foundations of Bayesian Decisión Theory provide a coherent framework in which decisión making problems may be solved. With the advent of powerful computers and given the many challenging problems we face, we are gradually attempting to solve more and more complex decisión making problems with high and multidimensional uncertainty, múltiple objectives, influence of time over decisión tasks and influence over many groups. These complexity factors demand better representation tools for decisión making problems; place strong cognitive demands on the decison maker judgements; and lead to involved computational problems. This thesis will deal with these three topics. In recent years, many representation tools have been developed for decisión making problems. In Chapter 1, we provide a critical review of most of them and conclude with recommendations and generalisations. Given our second query, we could wonder how may we deal with those representation tools when there is only partial information. In Chapter 2, we find out how to deal with such a problem when it is structured as an influence diagram (ID). We give an algorithm to compute nondominated solutions in ID's and analyse several ad hoc solution concepts.- The last issue is studied in Chapters 3 and 4. In a reservoir management case study, we have introduced a heuristic method for solving sequential decisión making problems. Since it shows very good performance, we extend the idea to general problems and quantify its goodness. We explore then in several directions the application of simulation based methods to Decisión Analysis. We first introduce Monte Cario methods to approximate the nondominated set in continuous problems. Then, we provide a Monte Cario Markov Chain method for problems under total information with general structure: decisions and random variables may be continuous, and the utility function may be arbitrary. Our scheme is applicable to many problems modeled as IDs. We conclude with discussions and several open problems.

Code assessment and modelling for Design Basis Accident analysis of the European Sodium Fast Reactor design. Part II: Optimised core and representative transients analysis

The new reactor concepts proposed in the Generation IV International Forum require the development and validation of computational tools able to assess their safety performance. In the first part of this paper the models of the ESFR design developed by several organisations in the framework of the CP-ESFR project were presented and their reliability validated via a benchmarking exercise. This second part of the paper includes the application of those tools for the analysis of design basis accident (DBC) scenarios of the reference design. Further, this paper also introduces the main features of the core optimisation process carried out within the project with the objective to enhance the core safety performance through the reduction of the positive coolant density reactivity effect. The influence of this optimised core design on the reactor safety performance during the previously analysed transients is also discussed. The conclusion provides an overview of the work performed by the partners involved in the project towards the development and enhancement of computational tools specifically tailored to the evaluation of the safety performance of the Generation IV innovative nuclear reactor designs.

Airplane materials compatibility with blends of fossil kerosene jet a1 with biokerosenes from babassu, palm kernel and coconut oils

El desarrollo de bioqueroseno de diferentes orígenes y su uso creciente, hacen necesario el estudio de la compatibilidad estos nuevos combustibles con los materiales y recubrimientos con los que se encuentra en contacto. Por tanto, el presente proyecto estudia la compatibilidad de los bioquerosenos mezclados en diferentes proporciones con queroseno mineral, para evaluar posteriormente su compatibilidad con diferentes polímeros y composites presentes en la estructura de un avión.Currently there is a big interest to increase the sources of alternative fuels for aviation to get a reduction of their carbon footprint and the deep energetic dependence from fossil fuels of different countries. Although there are studies about how to produce this alternative fuel and how to accomplish the standards for a good performance in the aircraft turbines, there are no studies about how these fuels could affect the different materials of airplanes. In this context this work describes the compatibility of biokerosene blends of coconut, babassu and palm kernel with commercial Jet A-1 testing airplane polymeric materials, metals and composites. As a conclusion, all material samples show a good compatibility with the fuel blends tested.

Study of the behaviour of CFRDs founded on active faults

Study of the behaviour of CFRD (concrete face rockfill dams) founded on active faults. It is generally accepted that embankment dams founded on active faults exhibit good behaviour during the rupture of a fault, whereas concrete gravity dams may be more seriously affected if significant differential movements occur at their foundations. However, experience with CFRDs subjected to fault displacements at their foundation is limited and therefore it is important to analyse the likely response of CFRDs in such a scenario.

Polyolefin fibre-reinforced concrete : from material behaviour to numerical and design considerations

La presente Tesis proporciona una gran cantidad de información con respecto al uso de un nuevo y avanzado material polimérico (con base de poliolefina) especialmente adecuada para ser usada en forma de fibras como adición en el hormigón. Se han empleado fibras de aproximadamente 1 mm de diámetro, longitudes entre 48 y 60 mm y una superficie corrugada. Las prometedoras propiedades de este material (baja densidad, bajo coste, buen comportamiento resistente y gran estabilidad química) justifican el interés en desarrollar el esfuerzo de investigación requerido para demostrar las ventajas de su uso en aplicaciones prácticas. La mayor parte de la investigación se ha realizado usando hormigón autocompactante como matriz, ya que este material es óptimo para el relleno de los encofrados del hormigón, aunque también se ha empleado hormigón normal vibrado con el fin de comparar algunas propiedades. Además, el importante desarrollo del hormigón reforzado con fibras en los últimos años, tanto en investigación como en aplicaciones prácticas, también es muestra del gran interés que los resultados y consideraciones de diseño que esta Tesis pueden tener. El material compuesto resultante, Hormigón Reforzado con Fibras de Poliolefina (HRFP o PFRC por sus siglas inglesas) ha sido exhaustivamente ensayado y estudiado en muchos aspectos. Los resultados permiten establecer cómo conseguidos los objetivos buscados: -Se han cuantificado las propiedades mecánicas del PFRC con el fin de demostrar su buen comportamiento en la fase fisurada de elementos estructurales sometidos a tensiones de tracción. -Contrastar los resultados obtenidos con las bases propuestas en la normativa existente y evaluar las posibilidades para el uso del PFRC con fin estructural para sustituir el armado tradicional con barras de acero corrugado para determinadas aplicaciones. -Se han desarrollado herramientas de cálculo con el fin de evaluar la capacidad del PFRC para sustituir al hormigón armado con las barras habituales de acero. -En base a la gran cantidad de ensayos experimentales y a alguna aplicación real en la construcción, se han podido establecer recomendaciones y consejos de diseño para que elementos de este material puedan ser proyectados y construidos con total fiabilidad. Se presentan, además, resultados prometedores en una nueva línea de trabajo en el campo del hormigón reforzado con fibras combinando dos tipologías de fibras. Se combinaron fibras de poliolefina con fibras de acero como refuerzo del mismo hormigón autocompactante detectándose sinergias que podrían ser la base del uso futuro de esta tecnología de hormigón. This thesis provides a significant amount of information on the use of a new advanced polymer (polyolefin-based) especially suitable in the form of fibres to be added to concrete. At the time of writing, there is a noteworthy lack of research and knowledge about use as a randomly distributed element to reinforce concrete. Fibres with an approximate 1 mm diameter, length of 48-60 mm, an embossed surface and improved mechanical properties are employed. The promising properties of the polyolefin material (low density, inexpensive, and with good strength behaviour and high chemical stability) justify the research effort involved and demonstrate the advantages for practical purposes. While most of the research has used self-compacting concrete, given that this type of matrix material is optimum in filling the concrete formwork, for comparison purposes standard vibration compacted mixes have also been used. In addition, the interest in fibre-reinforced concrete technology, in both research and application, support the significant interest in the results and considerations provided by the thesis. The resulting composite material, polyolefin fibre reinforced concrete (PFRC) has been extensively tested and studied. The results have allowed the following objectives to be met: -Assessment of the mechanical properties of PFRC in order to demonstrate the good performance in the post-cracking strength for structural elements subjected to tensile stresses. -- Assessment of the results in contrast with the existing structural codes, regulations and test methods. The evaluation of the potential of PFRC to meet the requirements and replace traditional steel-bar reinforcement applications. -Development of numerical tools designed to evaluate the capability of PFRC to substitute, either partially or totally, standard steel reinforcing bars either alone or in conjunction with steel fibres. -Provision, based on the large amount of experimental work and real applications, of a series of guidelines and recommendations for the practical and reliable design and use of PFRC. Furthermore, the thesis also reports promising results about an innovative line in the field of fibre-reinforced concrete: the design of a fibre cocktail to reinforce the concrete by using two types of fibres simultaneously. Polyolefin fibres were combined with steel fibres in self-compacting concrete, identifying synergies that could serve as the base in the future use of fibre-reinforced concrete technology.

Low-Cost Radar-Based Target Identification Prototype using an Expert System

Smart and green cities are hot topics in current research because people are becoming more conscious about their impact on the environment and the sustainability of their cities as the population increases. Many researchers are searching for mechanisms that can reduce power consumption and pollution in the city environment. This paper addresses the issue of public lighting and how it can be improved in order to achieve a more energy efficient city. This work is focused on making the process of turning the streetlights on and off more intelligent so that they consume less power and cause less light pollution. The proposed solution is comprised of a radar device and an expert system implemented on a low-cost platform based on a DSP. By analyzing the radar echo in both the frequency and time domains, the system is able to detect and identify objects moving in front of it. This information is used to decide whether or not the streetlight should be turned on. Experimental results show that the proposed system can provide hit rates over 80%, promising a good performance. In addition, the proposed solution could be useful in kind of other applications such as intelligent security and surveillance systems and home automation.