Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition (1). ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2003

Fiber composite materials (FRP) are making an entry into the construction market in both buildings and pavements. The application to pavements comes in the form of joint reinforcement (dowels and tie bars) to date. FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy coated dowels for pavements. Iowa State University has completed a large amount of laboratory research into the determination of diameter, spacing, and durability of FRP dowels. This report documents the installation of a series of FRP elliptical-shaped dowel joints (including instrumented units) in a field situation and the beginning of a two-year study to compare laboratory results to in-service pavements. Ten joints were constructed for each of three dowel spacings of 10, 12, and 15 inches ( 254, 305, and 381 mm) with one instrumented joint in each test section. The instrumented bars will be load tested with a loaded truck and FWD testing.

Extra-articular knee resection for a secondary chondrosarcoma evolving from an isolated enchondroma of the distal femur: A case report.

Introduction: Enchondromas are among the most current benign bone tumours. Malignant degeneration is extremely rare (<1%) and generally presents as a low grade chondrosarcoma. For localized grade 1 lesions, the treatment of choice is curettage. Wide excision and reconstruction is generally not necessary, unless locally advanced or more aggressive behaviour is suspected at presentation. Case report: A healthy 72 yo male presented with pain and recurrent knee joint effusion. X-rays show a classical central distal metaphyseal enchondroma of the femur associated with subtle osteolysis of the lateral condyle. MRI confirms the presence of a locally aggressive chondromatous lesion based in a classical enchondroma. Core needle biopsy revealed a grade 1 chondrosarcoma, which was in contrast to the radiological aggressiveness of the lesion. Total body CT-scan did not reveal metastatic disease. A wide resection was planned, as a high-grade lesion and joint contamination was suspected. We performed an extra-articular knee resection and reconstruction with a hinged modular total knee megaprosthesis. The definitive histology was grade 1 chondrosarcoma, the surgical margins were wide. The evolution was favourable and the patient was able to perform all his activities of daily living independently without pain at 6 weeks postop. Knee flexion reached 90°. The oncologic screening at 18 months did not show local or distant recurrence. Conclusion: Joints near a benign tumour that suddenly become symptomatic or present an effusion might indicate a malignant transformation. Wide resection and prosthetic reconstruction remains an effective treatment option even in low grade cartilaginous lesions if (1) the adjacent joint is contaminated, or (2) joint-sparing surgery would result in a severe functional impairment of the limb.

Recessive multiple epiphyseal dysplasia (rMED) with homozygosity for C653S mutation in the DTDST gene - phenotype, molecular diagnosis and surgical treatment of habitual dislocation of multilayered patella: case report.

BACKGROUND: Multiple epiphyseal dysplasia (MED) is one of the more common generalised skeletal dysplasias. Due to its clinical heterogeneity diagnosis may be difficult. Mutations of at least six separate genes can cause MED. Joint deformities, joint pain and gait disorders are common symptoms. CASE PRESENTATION: We report on a 27-year-old male patient suffering from clinical symptoms of autosomal recessive MED with habitual dislocation of a multilayered patella on both sides, on the surgical treatment and on short-term clinical outcome. Clinical findings were: bilateral hip and knee pain, instability of femorotibial and patellofemoral joints with habitual patella dislocation on both sides, contractures of hip, elbow and second metacarpophalangeal joints. Main radiographic findings were: bilateral dislocated multilayered patella, dysplastic medial tibial plateaus, deformity of both femoral heads and osteoarthritis of the hip joints, and deformity of both radial heads. In the molecular genetic analysis, the DTDST mutation g.1984T > A (p.C653S) was found at the homozygote state. Carrier status was confirmed in the DNA of the patient's parents. The mutation could be considered to be the reason for the patient's disease. Surgical treatment of habitual patella dislocation with medialisation of the tibial tuberosity led to an excellent clinical outcome. CONCLUSIONS: The knowledge of different phenotypes of skeletal dysplasias helps to select genes for genetic analysis. Compared to other DTDST mutations, this is a rather mild phenotype. Molecular diagnosis is important for genetic counselling and for an accurate prognosis. Even in case of a multilayered patella in MED, habitual patella dislocation could be managed successfully by medialisation of the tibial tuberosity.

Early detection of microcirculatory perfusion changes with a high resolution, real time laser Doppler imaging camera--frostbite case study.

A 41-year-old male presented with severe frostbite that was monitored clinically and with a new laser Doppler imaging (LDI) camera that records arbitrary microcirculatory perfusion units (1-256 arbitrary perfusion units (APU's)). LDI monitoring detected perfusion differences in hand and foot not seen visually. On day 4-5 after injury, LDI showed that while fingers did not experience any significant perfusion change (average of 31±25 APUs on day 5), the patient's left big toe did (from 17±29 APUs day 4 to 103±55 APUs day 5). These changes in regional perfusion were not detectable by visual examination. On day 53 postinjury, all fingers with reduced perfusion by LDI were amputated, while the toe could be salvaged. This case clearly demonstrates that insufficient microcirculatory perfusion can be identified using LDI in ways which visual examination alone does not permit, allowing prognosis of clinical outcomes. Such information may also be used to develop improved treatment approaches.

Evaluation of Transverse Joint Forming Methods for PCC Pavement, January 2006

The members of the Iowa Concrete Paving Association, the National Concrete Pavement Technology Center Research Committee, and the Iowa Highway Research Board commissioned a study to examine alternative ways of developing transverse joints in portland cement concrete pavements. The present study investigated six separate variations of vertical metal strips placed above and below the dowels in conventional baskets. In addition, the study investigated existing patented assemblies and a new assembly developed in Spain and used in Australia. The metal assemblies were placed in a new pavement and allowed to stay in place for 30 days before the Iowa Department of Transportation staff terminated the test by directing the contractor to saw and seal the joints. This report describes the design, construction, testing, and conclusions of the project.

Universal Design for Better Living The Essential Bathroom, May 2004

An easy-living home requires a full-sized bathroom on the main level. Family members will appreciate the extra space and guests of all ages and abilities will feel more welcome. At a minimum, you’ll need a five foot circle of open floor space for maneuvering a wheelchair between bathroom fixtures. A small powder room won’t work for guests who use walkers or wheelchairs. A shower stall—with no curb to step over—is more convenient than a tub for most guests. Make sure the doorway opening for the bathroom is at least 32 inches wide (preferably 36 inches). Universal design features, such as these, make homes better for everyone.

The value of serum procalcitonin level for differentiation of infectious from noninfectious causes of fever after orthopaedic surgery.

BACKGROUND: Early diagnosis of postoperative orthopaedic infections is important in order to rapidly initiate adequate antimicrobial therapy. There are currently no reliable diagnostic markers to differentiate infectious from noninfectious causes of postoperative fever. We investigated the value of the serum procalcitonin level in febrile patients after orthopaedic surgery. METHODS: We prospectively evaluated 103 consecutive patients with new onset of fever within ten days after orthopaedic surgery. Fever episodes were classified by two independent investigators who were blinded to procalcitonin results as infectious or noninfectious origin. White blood-cell count, C-reactive protein level, and procalcitonin level were assessed on days 0, 1, and 3 of the postoperative fever. RESULTS: Infection was diagnosed in forty-five (44%) of 103 patients and involved the respiratory tract (eighteen patients), urinary tract (eighteen), joints (four), surgical site (two), bloodstream (two), and soft tissues (one). Unlike C-reactive protein levels and white blood-cell counts, procalcitonin values were significantly higher in patients with infection compared with patients without infection on the day of fever onset (p = 0.04), day 1 (p = 0.07), and day 3 (p = 0.003). Receiver-operating characteristics demonstrated that procalcitonin had the highest diagnostic accuracy, with a value of 0.62, 0.62, and 0.71 on days 0, 1, and 3, respectively. In a multivariate logistic regression analysis, procalcitonin was a significant predictor for postoperative infection on days 0, 1, and 3 of fever with an odds ratio of 2.3 (95% confidence interval, 1.1 to 4.4), 2.3 (95% confidence interval, 1.1 to 5.2), and 3.3 (95% confidence interval, 1.2 to 9.0), respectively. CONCLUSIONS: Serum procalcitonin is a helpful diagnostic marker supporting clinical and microbiological findings for more reliable differentiation of infectious from noninfectious causes of fever after orthopaedic surgery.

Patients' knowledge of Diabetes five years after the end of an educational program

We present a cross-sectional study that aims to describe the sociodemographic and clinical conditions of individuals with diabetes mellitus and to analyze their knowledge of treatment five years after the end of an educational program in which they took part. In 2010, 40 individuals who had participated in a diabetes educational program for 12 months in 2005 at a primary care service were interviewed. A form was used for data collection that included their knowledge of the notion, physiopathology, and treatment of the disease; exercise; nutrition; foot care; self-monitoring of capillary blood glucose at home; hypoglycemia; chronic complications; special situations; and family support. The results showed that the volunteers incorporated the information about the notion, physiopathology, and treatment of the disease; exercise; foot care; self-monitoring; care associated with hypoglycemia; chronic complications; and special situations. In contrast, nutrition and family support require further reinforcement. It is concluded that five years after the end of the educational program, the participants kept most of the information provided.

An easy functional capacity evaluation in chronic low back pain

Lifting is said to be on of the major risk factors for the onset of low back pain, several different measures has been developed to study this. Several programs are available in order to measure these components, or to determine the ability of an individual to perform a certain job or to discover if the job creates dangerous positions for the worker. In these different fields reliable and valid instruments exist but they are costly and time spending. We present a simplified functional capacity measuring that we use daily in practise. Method: 280 patients have been evaluated on this base. The majority was referred to multidisciplinary rehabilitation treatment. The patients had recurrent back problems for months or years. Inclusion criteria were between 18 and 64 years, currently of work, no work compensation. Exclusion criteria were chronic low back pain with a specific cause. They followed a one-hour evaluation test as a functional capacity evaluation at the end of the multidisciplinary treatment period, it was compared to the PILE-test done at the beginning and at the end. Results: We included 280 subjects: 160 men and 120 women. Mean age 43.6 by the women and 44 years by the men. We studied the caring foot-hip, hip-shoulder, 5 m carrying, pushing and tiring and the global weight carried during the test. We found this global value to be 696 kg by men and 422 kg by women suffering from chronic lumbar pain. The increase in this value had a clear incidence on a greater work ability, as had a decrease. Conclusions: We were able to develop a lifting capacity program that is easy to reproduce and not expensive, giving us the possibility to have an idea on how to reorient the patients according to their work place and their capacities. We could also have an information of work performance and power consumption. It should be more tested and compared to standard capacity in the healthy population.

Administration of Il-18bp by Gene Therapy Reduces Inflammation and Prevents Joint Destruction by Downregulation of Mmp9 In Rat Aia: Role ff Mmp9 In Bone and Joint Destruction in Arthritis

Background and objectives Interleukin 18 (IL-18) is a pleiotropic cytokine involved in rheumatoid arthritis (RA) pathogenesis. This study was carried out to evaluate the effi cacy of IL-18 binding protein (IL-18BP) gene therapy in the rat adjuvant- induced arthritis (AIA) model and to decipher the mechanisms by which IL-18BP delivery lessens bone destruction.Materials and methods Arthritis was induced in female Lewis rat by Mycobacterium butyricum and the mRNA expression of IL-18 and IL-18BP was determined in the joints. In a preventive study, rats were divided into an adenovirus producing IL-18BP-Fc (AdmIL-18BP-Fc) group (n=8) and an adenovirus producing green fl uorescent protein (AdGFP) group (n=7). On day 8 after AIA induction, adenoviruses were injected. Clinical parameters were assessed. At day 18, during maximal arthritis, the rats were euthanized, ankles were collected and x-rays were performed. mRNA and protein were extracted from joints for analysis by quantitative reverse transcriptase-PCR, multiplex, Western blot and zymography.Results The authors observed a decrease in the (IL-18BP/ IL-18) ratio from day 7 to 45. Administration of AdmIL-18BPd-Fc decreased clinical parameters and prevented bone and joint destruction compared to AdGFP administration. IL-18BP delivery reduced the (receptor activator of nuclear factor κB ligand (RANKL)/osteoprotegerin (OPG)) ratio by 70%, the matrix metalloproteinase 9 (MMP9) level by 33% and the tartrate-resistant acid phosphatase (TRAP) level by 44% in the joint homogenates from AdmIL-18BPd-Fc compared to AdGFP treated rats.Conclusions In rat AIA, a decrease in the (IL-18BP/IL-18) ratio was observed. IL-18BP delivery prevented joint and bone destruction by downregulating MMP9, (RANKL/OPG) and TRAP, suggesting a potential benefi t of a similar therapy in RA.Abstract topics Towards novel therapeutic strategies.

Scientific production on the applicability of phenytoin in wound healing

Phenytoin is an anticonvulsant that has been used in wound healing. The objectives of this study were to describe how the scientific production presents the use ofphenytoinas a healing agent and to discuss its applicability in wounds. A literature review and hierarchy analysis of evidence-based practices was performed. Eighteen articles were analyzed that tested the intervention in wounds such as leprosy ulcers, leg ulcers, diabetic foot ulcers, pressure ulcers, trophic ulcers, war wounds, burns, preparation of recipient graft area, radiodermatitis and post-extraction of melanocytic nevi. Systemic use ofphenytoinin the treatment of fistulas and the hypothesis of topical use in the treatment of vitiligo were found. In conclusion, topical use ofphenytoinis scientifically evidenced. However robust research is needed that supports a protocol for the use ofphenytoinas another option of a healing agent in clinical practice.

VOLUMES RELIES du Cabinet des titres : recherches de noblesse, armoriaux, preuves, histoires généalogiques. Recherches de la noblesse dans les Généralités de Poitiers, Lyon, Dauphiné, Riom et Metz.

Contient : « Nobiliaire de la Généralité de Poitiers » ; « Nobiliaire de la Généralité de Lyon » ; « Nobiliaire de la Généralité de Dauphiné » ; « Nobiliaire de la Généralité de Riom. » — Nobiliaire de la Généralité de Metz »

Laboratory Study of Structural Behavior of Alternative Dowel Bars, April 2006

Load transfer across transverse joints has always been a factor contributing to the useful life of concrete pavements. For many years, round steel dowels have been the conventional load transfer mechanism. Many problems have been associated with the round steel dowels. The most detrimental effect of the steel dowel is corrosion. Repeated loading over time also damages joints. When a dowel is repeatedly loaded over a long period of time, the high bearing stresses found at the top and bottom edge of a bar erode the surrounding concrete. This oblonging creates multiple problems in the joint. Over the past decade, Iowa State University has performed extensive research on new dowel shapes and materials to mitigate the effects of oblonging and corrosion. This report evaluates the bearing stress performance of six different dowel bar types subjected to two different shear load laboratory test methods. The first load test is the AASHTO T253 method. The second procedure is an experimental cantilevered dowel test. The major objective was to investigate and improve the current AASHTO T253 test method for determining the modulus of dowel support, k0. The modified AASHTO test procedure was examined alongside an experimental cantilever dowel test. The modified AASHTO specimens were also subjected to a small-scale fatigue test in order to simulate long-term dowel behavior with respect to concrete joint damage. Loss on ignition tests were also performed on the GFRP dowel specimens to determine the resin content percentage. The study concluded that all of the tested dowel bar shapes and materials were adequate with respect to performance under shear loading. The modified AASHTO method yielded more desirable results than the ones obtained from the cantilever test. The investigators determined that the experimental cantilever test was not a satisfactory test method to replace or verify the AASHTO T253 method.

VOLUMES RELIES du Cabinet des titres : recherches de noblesse, armoriaux, preuves, histoires généalogiques. Recherches de la noblesse dans les Généralités de Soissons et d'Alençon.

Contient : « Nobiliaire de la Généralité de Soissons » ; « Nobiliaire de la Généralité d'Alençon »