Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

In this work the effect of Gas Tungsten Arc Welding (GTAW) repairs on the axial fatigue strength of an AISI 4130 steel welded joint used in airframe critical to the flight-safety was investigated. Fatigue tests were performed at room temperature on 0.89 mm thick hot-rolled plates with constant amplitude and load ratio of R = 0.1, at 20 Hz frequency. Monotonic tensile tests, optical metallography and microhardness, residual stress and weld geometric factors measurements were also performed. The fatigue strength decreased with the number of GTAW repairs, and was related to microstructural and microhardness changes, as well as residual stress field and weld profile geometry factors, which gave origin to high stress concentration at the weld toe. (C) 2011 Elsevier B.V. All rights reserved.

Evaluation of the fretting fatigue behaviour of commercially pure titanium

Fretting fatigue occurs when the contact surfaces of two components undergo small oscillatory movement while they are subjected to a clamping force. A cyclic external load gives rise to the early initiation of fatigue cracks, thus reducing their service life. In this paper, the fretting fatigue behaviour of commercially pure titanium flat samples (1.5 mm thick) is evaluated. A fretting device composed of a frame, load cell, and two screw-mounted cylindrical fretting pads with convex extremities was built and set to a servo-hydraulic testing machine. The fatigue tests were conducted under load control at a frequency of 10 Hz and stress ratio R = 0.1, with various contact load values applied to the fretting pads. Additional tests under inert environment allowed assessing the role of oxidation on the wear debris formation. The fracture surfaces and fretting scars were analysed via scanning electron microscopy in order to evaluate the surface damage evolution and its effect on the fatigue crack features. The effect of the fretting condition on the S-N curve of the material in the range of 10(4)-10(6) cycles is described. Fatigue crack growth calculations allowed estimating the crack initiation and propagation lives under fretting conditions. The effect of the fretting condition in fatigue life is stronger for the lower values of cyclic stress and does not seem to depend on the contact loading value.

Wear Particle Classifier System Based on an Artificial Neural Network

This paper describes a method of identifying morphological attributes that classify wear particles in relation to the wear process from which they originate and permit the automatic identification without human expertise. The method is based on the use of Multi Layer Perceptron (MLP) for analysis of specific types of microscopic wear particles. The classification of the wear particles was performed according to their morphological attributes of size and aspect ratio, among others. (C) 2010 Journal of Mechanical Engineering. All rights reserved.

Representação de linhas de transmissão por meio de variáveis de estado levando em consideração o efeito da freqüência sobre os parâmetros longitudinais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese, caracterização e aplicação de MCM-41 funcionalizado com diisopropilamina no processo de adsorção do dióxido de carbono

Emissions of CO2 in the atmosphere have increased successively by various mechanisms caused by human action, especially as fossil fuel combustion and industrial chemical processes. This leads to the increase in average temperature in the atmosphere, which we call global warming. The search for new technologies to minimize environmental impacts arising from this phenomenon has been investigated. The capture of CO2 is one of the alternatives that can help reduce emis ions of greenhouse gases. The CO2 can be captured through the process of selective adsorption using adsorbents for this purpose. Were synthesized by hydrothermal method, materials of the type MCM-41 and Al-MCM-41 in the molar ratio Si / Al equal to 50. The synthesis of gels were prepared from a source of silicon, sodium, water and aluminum in the case of Al-MCM-41. The period of synthesis of the materials was 5 days in autoclave at 100°C. After that time materials were filtered, washed and dried in greenhouse at 100 º C for 4 hours and then calcined at 450 º C. Then the calcined material was functionalized with the Di-isopropylamine (DIPA) by the method of wet impregnation. We used 0.5 g of material mesopores to 3.5 mL of DIPA. The materials were functionalized in a closed container for 24 hours, and after this period were dried at brackground temperature for 2 hours. Were subsequently subjected to heat treatment at 250°C for 1 hour. These materials were used for the adsorption of CO2 and were characterized by XRD, FT-IR, BET / BJH, SEM, EDX and TG / DTG. Tests of adsorption of CO2 was carried out under the following conditions: 100 mg of adsorbent, temperature of 75°C under flow of 100 mL/min of CO2 for 2 hours. The desorption of CO2 was carried out by thermogravimetry from ambient temperature to 900ºC under flow of 25 mL min of He and a ratio of 10ºC/min. The difratogramas X-ray for the synthesized samples showed the characteristic peaks of MCM-41, showing that the structure of it was obtained. For samples functionalized there was a decrease of the intensities of these peaks, with a consequent reduction in the structural ordering of the material. However, the structure was preserved mesopores. The adsorption tests showed that the functionalized MCM-41 is presented as a material promising adsorbent, for CO2 capture, with a loss of mass on the desorption CO2 of 7,52%, while that in Al-MCM- 41 functionalized showed no such loss

Reforma a vapor catalítica do metano: Otimização da produção e seletividade em hidrogênio por absorção in situ do CO2 produzido

Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming

Estudo epidemiológico da Toxoplasmose em gestantes atendidas na Maternidade Escola Januário Cicco, Natal, Rio Grande do Norte

Congenital Toxoplasmosis results in severe systemic disease. If mother is infected for the first time during gestation, she can infect the fetus causing substantial damage. However, relatively little is known about the seroprevalence and epidemiological and economic factors of Toxoplasmosis infection in pregnancy in the most state in northeastern Brazil and knowledge about this can be essential in determining effective and acceptable prevention strategies. Our aim was to determine the prevalence of Toxoplasmosis in pregnant woman consulted by reference Maternity Escola Januário Cicco in Natal, a city in Northeastern Brazil, which belongs to the public health system, correlating to the risk factors involved in the infection and to accomplish active Search in the Hospital of Pediatrics Profº Heriberto Bezerra of the damages caused by the Toxoplasmic infection in children up to 12 years of age. The study was conducted from March to December 2007 and sera obtained from 190 pregnant women were tested for IgM and IgG antibodies avidity to Toxoplasma by Microparticle enzyme immunoassay (Abbott AxSYM system - Abbott Laboratories, Chicago, IL, USA). Data were examined with univariate analysis. Chi-squared (x2) and Odds ratio was calculated (IC 95% p 0,05). Of these women, 126 (66,3%) had only IgG antibodies high-avidity against T. gondii; 01 (0,52%) had a IgM and IgG high-avidity antibodies against T. gondii and 63 (33,1%) have neither IgM nor IgG against T. gondii. Our studies shown that the direct contact with cats or dogs was highly associated with the Toxoplasma gondii infection (OR, 2.72, p<0.001, 95% CI 1.46 5.02). The years school (p<0,001), socioeconomic status and knowledge about the disease (both p value 0.05) also were associated with Toxoplasmosis. The pattern of risk factors for infection presents regional variations, however our data corroborate others studies in Brazil. In children up to 12 years, one case of Congenital Toxoplasmosis was just registered in seven years (2000 - 2006). There were several suggestive cases, with signs and characteristic symptoms, but that the infection was not confirmed due to lack in the researches through laboratorial and images exams that addressed that it zoonosis

Testes de hipóteses em modelos de sobrevivência com Fração de cura

Survival models deals with the modeling of time to event data. However in some situations part of the population may be no longer subject to the event. Models that take this fact into account are called cure rate models. There are few studies about hypothesis tests in cure rate models. Recently a new test statistic, the gradient statistic, has been proposed. It shares the same asymptotic properties with the classic large sample tests, the likelihood ratio, score and Wald tests. Some simulation studies have been carried out to explore the behavior of the gradient statistic in fi nite samples and compare it with the classic statistics in diff erent models. The main objective of this work is to study and compare the performance of gradient test and likelihood ratio test in cure rate models. We first describe the models and present the main asymptotic properties of the tests. We perform a simulation study based on the promotion time model with Weibull distribution to assess the performance of the tests in finite samples. An application is presented to illustrate the studied concepts

Refluxo gastroesofágico: estudo comparativo da receptividade e sensibilidade entre seriografia e ultrassonografia

OBJETIVO: Estudo comparativo da receptividade (colaboração) e sensibilidade da seriografia do esôfago, estômago e duodeno em relação à ultrassonografia do esôfago intra-abdominal em pacientes com suspeita de refluxo gastroesofágico. MATERIAIS E MÉTODOS: Foram incluídos no estudo 42 pacientes pediátricos (26 masculinos, com idade média de 33,64 ± 34,33 meses, e 16 femininos, com idade média de 31,02 ± 35,56 meses) com suspeita de refluxo gastroesofágico, os quais foram submetidos, inicialmente, a seriografia do esôfago, estômago e duodeno, e posteriormente, a ultrassonografia do esôfago intra-abdominal. RESUL-TADOS: A análise estatística comparativa entre os sexos e as idades sugere não haver evidência de associação com a colaboração, tanto para a seriografia do esôfago, estômago e duodeno como para a ultrassonografia do esôfago intra-abdominal. Entretanto, na classificação quanto ao tipo de colaboração, a técnica de seriografia do esôfago, estômago e duodeno apresentou menos de 50% de colaboração, enquanto 80,49% dos pacientes colaboraram com a ultrassonografia do esôfago intra-abdominal. Quanto à sensibilidade do diagnóstico de refluxo gastroesofágico, a técnica de ultrassonografia do esôfago intra-abdominal (85,7%) foi significativamente superior à de seriografia do esôfago, estômago e duodeno (47,6%). CONCLUSÃO: O presente estudo sugere que se proceda a ultrassonografia do esôfago intra-abdominal, mesmo na ausência de refluxo gastroesofágico na seriografia do esôfago, estômago e duodeno.

Monitoramento geoambiental do estuário do Rio Paraíba do Norte - PB por meio da cartografia temática digital e de produtos de sensoriamento remoto

The North Paraíba River Estuary, located in the eastern portion of the Paraíba State, Northeast Brazil, on coordinates 34º50 00 -34º57 30 S and 6º55 00 -7º7 30 W, constitutes a fluvio-marine plain formed by the North Paraíba River and its tributaries Sanhauá, Paroeira, Mandacaru, Tiriri, Tambiá, Ribeira and Guia. This estuary comprises an area of about 260 km2. Increasing human demands on the estuary area and inadequate environment managing have generated conflicts. The present work main purpose is to evaluate the geodynamic evolution of the North Paraíba River Estuary in the period from 1969 to 2001, using digital image processing techniques, thematic digital cartography and multitemporal data integration, combined to geological-geophysical field surveys. The SUDENE cartographic database, converted to digital format were, used to obtain occupation and topographic maps from 1969 and to generate a Digital Elevation Model (DEM). Digital Landsat 7 ETM+ and Spot HRVIR-PAN satellite images interpretation allowed the environmental characterization of the estuary. The most important digital processing results were achieved color composites RGB 5-4-3, 5-3-1, 5-2-NDWI and band ratio 7/4-5/3-4/2, 5/7-3/1-5/4). In addition the fusion image technique RGBI was used by the inclusion of the Spot HRVRI and Landsat 7 ETM+ panchromatic band on I layer with RGB triplets 5-4-3, 5-3-1 and 5/7-3/1-5/4. The DEM and digital images integration allowed the identification of seven geomorphological units: coastal tableland, flowing tray, tide plain, fluvial terrace, submerged dune, beach plain and beach). Both Side Scan Sonar and Echosound were used to analyse underwater surface and bedforms of the estuarine channel, sand predominance (fine to very fine) and 2D dune features 5 m wide and 0.5 m height. This investigation characterized the estuary as an environment dominated by regimen of average flow. The channel depth varies between 1 m and 11 m, being this last quota reached in the area of Porto de Cabedelo. The chanel estuary is relatively shallow, with erosion evidences mainly on its superior portion, attested by sand banks exposed during the low tide. Multitemporal digital maps from 1969 and 2001 integration were obtained through geoprocessing techniques, resulting the geodynamic evolution of the estuary based on landuse, DEM geomorphology and bathymetric maps

Estudo da atividade sísmica em São Caetano-PE em 2007

In this dissertation we studied the seismic activity in the São Caetano county, Pernambuco State, Northeastern Brazil, located near the Pernambuco Lineament. The Pernambuco Lineament is a one of Neoproterozoic continental-scale shear zones that deforms the Borborema province. The seismicity estudied occurred in a NE trending branch of Pernambuco Lineament. The seismic activity in São Caetano started in 2006 and in May 20th, 2006 a 4,0 mb earthquake hit there. This was the largest earthquake ever reported in Pernambuco State. This dissertation is the result of a campaign done in the period from Februay 1th 2007 to July 31 th 2007. In this campaign up to nine three-component digital seismographic stations were deployed and the collected data was used to determine hypocenters and focal mechanism. A total of 214 earthquakes, recorded at least by three stations, were analyzed. To determine hypocenters and time origin the HYPO71 program was used assuming a half-space model with parameters : VP (P-wave velocity) equal to 5.90 km/s and the ratio VP/VS 1.70, where VS is the S-wave velocity. The earthquakes hypocentral distribution was approximately 4 km long and agrees with the NE-SW direction of the Pernambuco Lineamento branch. Hypocentres depth range from 2 to 8 km. The composed focal mechanism was made from a group of 14 selected earthquakes. We try firstly to find the fault plane solution matching the polarity distribution at stations, using the FPFIT program. The result was 43 deg ± 15 deg for strike, 59 deg ± 9 deg for dip and -142 deg ± 15 deg for rake. We also fitted a plane using the hypocentral distribution to obtain the dip and azimuth of the hypocentral distribution. The results obtained by this fit were 58 deg for the azimuth, 55 deg for the dip and -155 deg for rake. This result shows a mechanism of a strike-slip dextral fault with a normal component. This dissertation shows, once more, that there is a good correlation between the seismic activity and geological features in the region near the Pernambuco Lineament and its NE branches

Estudo comparativo de abordagens de inversão do fator de qualidade Q

Seismic wave dispersion and attenuation studies have become an important tool for lithology and fluid discrimination in hydrocarbon reservoirs. The processes associated to attenuation are complex and are encapsulated in a single quantitative description called quality factor (Q). The present dissertation has the objective of comparing different approaches of Q determination and is divided in two parts. Firstly, we made performance and robustness tests of three different approaches for Q determination in the frequency domain. They are: peak shift, centroid shift and spectral ratio. All these tests were performed in a three-layered model. In the suite of tests performed here, we varied the thickness, Q and inclination of the layers for propagation pulses with central frequency of 30, 40 and 60 Hz. We found that the centroid shift method is produces robust results for the entire suíte of tests. Secondly, we inverted for Q values using the peak and centroid shift methods using an sequential grid search algorithm. In this case, centroid shift method also produced more robust results than the peak shift method, despite being of slower convergence

Indicadores antropométricos e as doenças crônicas não transmissíveis em mulheres na pós-menopausa da região Sudeste do Brasil

OBJETIVO: avaliar a influência dos indicadores antropométricos sobre os marcadores de risco cardiovascular e metabólico para doenças crônicas não-transmissíveis em mulheres na pós-menopausa. MÉTODOS: realizou-se estudo clínico transversal, com 120 mulheres sedentárias na pós-menopausa (com idades entre 45 e 70 anos e última menstruação há, pelo menos, 12 meses). Foram excluídas as diabéticas insulino-dependentes e usuárias de estatinas ou terapia hormonal até seis meses prévios. Para avaliação antropométrica, foram obtidos peso, estatura, índice de massa corpórea (IMC=peso/altura²) e circunferência da cintura (CC). As variáveis metabólicas avaliadas foram colesterol total (CT), HDL, LDL, triglicérides (TG), glicemia e insulina, para os cálculos do índice aterogênico plasmático (IAP) e resistência insulínica (Homeostasis model assessment-insulin resistance, HOMA-IR). Na análise estatística, utilizara-se análise de variância one-way (ANOVA) e Odds Ratio (OR). RESULTADOS: os dados médios caracterizaram amostra com sobrepeso, com obesidade central e dislipidêmica. Sobrepeso e obesidade estiveram presentes em 77,1% e deposição central de gordura ocorreu em 87,3% das participantes. Os valores médios de CT, LDL e TG estavam acima do recomendável em 67,8, 55,9 e 45,8% das mulheres, respectivamente, com HDL abaixo dos valores adequados em 40,7%. Valores de CC >88 cm ocorreram em 14,8% das mulheres eutróficas, 62,5% no grupo com sobrepeso e 100% nas obesas (p>0,05). Os valores médios de IAP, TG e HOMA-IR aumentaram significativamente com o aumento do IMC e da CC, enquanto que o HDL diminuiu (p<0,05). Na presença da CC >88 cm, encontrou-se risco de 5,8 (IC95%=2,3-14,8), 2,61 (IC95%=1,2-5,78), 3,4 (IC95%=1,2-9,7) e 3,6 (IC95%=1,3-10,3) para HDL reduzido, hipertrigliceridemia, IAP elevado e resistência a insulina, respectivamente (p<0,05). O IMC >30 kg/m² associou-se apenas com HDL reduzido (OR=3,1; IC95%=1,44-6,85). CONCLUSÕES: a associação de duas medidas antropométricas (CC e IMC) foi eficiente para adequado diagnóstico de obesidade relacionada a alterações metabólicas em mulheres na pós-menopausa. Contudo, a simples avaliação da CC pode ser indicativo do risco cardiovascular e metabólico das doenças crônicas não transmissíveis.

Preditores Clínicos e Histopatológicos de Tumor Trofoblástico Gestacional pós-Mola Hidatiforme Completa

Objetivo: definir os preditores clínicos e histopatológicos mais eficientes da evolução da mola hidatiforme completa (MHC) para tumor trofoblástico gestacional (TTG). Métodos: estudo prospectivo clínico e histopatológico de todas as portadoras de MHC, atendidas entre 1990 e 1998 no Hospital das Clínicas de Botucatu -- UNESP. A avaliação clínica pré-esvaziamento molar classificou a gravidez molar em: MHC de alto risco e MHC de baixo risco. Foram analisados os preditores clínicos para TTG, estabelecidos por Goldstein et al.¹ e por outros autores2--10. A avaliação histopatológica incluiu a determinação do diagnóstico de MHC, segundo os critérios de Szulman e Surti11, e o reconhecimento dos fatores de risco para TTG, de Ayhan et al.8. Os preditores clínicos e histopatológicos foram correlacionados com o desenvolvimento de TTG pós-molar. Resultados: em 65 portadoras de MHC, cistos do ovário maiores que 6 cm e tamanho uterino maior que 16 cm foram os preditores clínicos mais eficientes de TTG. A proliferação trofoblástica, a atipia nuclear, a necrose/hemorragia, a maturação trofoblástica e a relação cito/sinciciotrofoblasto não foram preditores significativos para TTG. A correlação entre preditor clínico e histopatológico para o desenvolvimento de TTG não foi possível porque nenhum parâmetro histopatológico foi significativo. Conclusões: mais estudos são necessários para avaliar possíveis preditores de persistência (TTG) e sua aplicação no contexto clínico das MHC. Enquanto isso, a determinação seriada de hCG sérico permanece o único indicador prognóstico seguro para TTG pós-MHC.

Estudo da excreção urinária de cálcio, potássio e sódio com o emprego de citrato de potássio na hipercalciúria idiopática na criança

OBJETIVO: Estudar as relações entre a excreção urinária de cálcio, sódio e potássio e a associação sódio/potássio urinários em crianças com hipercalciúria idiopática em dieta habitual, antes e depois da administração de citrato de potássio na dose de 1mEq/kg/dia. MÉTODOS: Foram estudadas prospectivamente 26 crianças: 19 (73%) meninos e sete (27%) meninas com idade entre dois e 13 anos, portadores de hipercalciúria idiopática recém-diagnosticada por dosagem de cálcio em urina de 24 horas >4mg/kg/dia. O citrato de potássio foi administrado na dose de 1mEq/kg/dia. Foram realizadas dosagens séricas e em urina de 24 horas de cálcio (Ca), potássio(K), sódio (Na) e creatinina (Cr), antes e 15 dias depois da administração diária do citrato de potássio. Para comparar os resultados de cálcio/creatinina (Ca/Cr), potássio/creatinina (K/Cr) e sódio/potássio (Na/K) urinários nos dois momentos, aplicou-se o teste não-paramétrico de Wilcoxon. Para a análise das associações entre Ca/Cr e K/Cr e entre Ca/Cr e Na/Cr foi utilizado o coeficiente de correlação de Pearson. Considerou-se significante p<0,05. RESULTADOS: Após o uso de citrato de potássio, ocorreu significativa redução da calciúria e da relação Na/K urinários, bem como elevação na caliúria. Não houve modificação da excreção urinária de sódio. CONCLUSÕES: em dieta habitual, o citrato de potássio eleva a caliúria e diminui a calciúria em criança hipercalciúricas, sendo um eficaz recurso terapêutico.