Using MDEFT MRI Sequences to Target the GPi in DBS Surgery.

OBJECTIVE Recent advances in different MRI sequences have enabled direct visualization and targeting of the Globus pallidus internus (GPi) for DBS surgery. Modified Driven Equilibrium Fourier Transform (MDEFT) MRI sequences provide high spatial resolution and an excellent contrast of the basal ganglia with low distortion. In this study, we investigate if MDEFT sequences yield accurate and reliable targeting of the GPi and compare direct targeting based on MDEFT sequences with atlas-based targeting. METHODS 13 consecutive patients considered for bilateral GPi-DBS for dystonia or PD were included in this study. Preoperative targeting of the GPi was performed visually based on MDEFT sequences as well as by using standard atlas coordinates. Postoperative CT imaging was performed to calculate the location of the implanted leads as well as the active electrode(s). The coordinates of both visual and atlas based targets were compared. The stereotactic coordinates of the lead and active electrode(s) were calculated and projected on the segmented GPi. RESULTS On MDEFT sequences the GPi was well demarcated in most patients. Compared to atlas-based planning the mean target coordinates were located significantly more posterior. Subgroup analysis showed a significant difference in the lateral coordinate between dystonia (LAT = 19.33 ± 0.90) and PD patients (LAT = 20.67 ± 1.69). Projected on the segmented preoperative GPi the active contacts of the DBS electrode in both dystonia and PD patients were located in the inferior and posterior part of the structure corresponding to the motor part of the GPi. CONCLUSIONS MDEFT MRI sequences provide high spatial resolution and an excellent contrast enabling precise identification and direct visual targeting of the GPi. Compared to atlas-based targeting, it resulted in a significantly different mean location of our target. Furthermore, we observed a significant variability of the target among the PD and dystonia subpopulation suggesting accurate targeting for each individual patient.

Probing the Structure, Pseudorotation, and Radial Vibrations of Cyclopentane by Femtosecond Rotational Raman Coherence Spectroscopy

Femtosecond time-resolved Raman rotational coherence spectroscopy (RCS) is employed to determine accurate rotational, vibration–rotation coupling constants, and centrifugal distortion constants of cyclopentane (C⁵H¹⁰). Its lowest-frequency vibration is a pseudorotating ring deformation that interconverts 10 permutationally distinct but energetically degenerate “twist” minima interspersed by 10 “bent” conformers. While the individual twist and bent structures are polar asymmetric tops, the pseudorotation is fast on the time scale of external rotation, rendering cyclopentane a fluxionally nonpolar symmetric top molecule. The pseudorotational level pattern corresponds to a one-dimensional internal rotor with a pseudorotation constant Bps ≈ 2.8 cm⁻¹. The pseudorotational levels are significantly populated up to l = ± 13 at 298 K; <10% of the molecules are in the l = 0 level. The next-higher vibration is the “radial” ν²³ ring deformation mode at 273 cm⁻¹, which is far above the pseudorotational fundamental. Femtosecond Raman RCS measurements were performed in a gas cell at T = 293 K and in a pulsed supersonic jet at T ≈ 90 K. The jet cooling reduces the pseudorotational distribution to l < ±8 and eliminates the population of ν²³, allowing one to determine the rotational constant as A0 = B0 = 6484.930(11) MHz. This value is ∼300 times more precise than the previous value. The fit of the RCS transients reveals that the rotation–pseudorotation coupling constant αe,psB = −0.00070(1) MHz is diminutive, implying that excitation of the pseudorotation has virtually no effect on the B0 rotational constant of cyclopentane. The smallness of αe,psB can be realized when comparing to the vibration–rotation coupling constant of the ν²³ vibration, αe,23B = −9.547(1) MHz, which is about 10⁴ times larger.

Tomographic PIV behind a prosthetic heart valve

The instantaneous three-dimensional velocity field past a bioprosthetic heart valve was measured using tomographic particle image velocimetry (PIV). Two digital cameras were used together with a mirror setup to record PIV images from four different angles. Measurements were conducted in a transparent silicone phantom with a simplified geometry of the aortic root. The refraction indices of the silicone phantom and the working fluid were matched to minimize optical distortion from the flow field to the cameras. The silicone phantom of the aorta was integrated in a flow loop driven by a piston pump. Measurements were conducted for steady and pulsatile flow conditions. Results of the instantaneous, ensemble and phase averaged flow field are presented. The three-dimensional velocity field reveals a flow topology, which can be related to features of the aortic valve prosthesis.

Uniqueness of minimisers for a Grötzsch-Belinskiĭ type inequality in the Heisenberg group

The modulus method introduced by H. Grötzsch yields bounds for a mean distortion functional of quasiconformal maps between two annuli mapping the respective boundary components onto each other. P. P. Belinskiĭ studied these inequalities in the plane and identified the family of all minimisers. Beyond the Euclidean framework, a Grötzsch-Belinskiĭ-type inequality has been previously considered for quasiconformal maps between annuli in the Heisenberg group whose boundaries are Korányi spheres. In this note we show that--in contrast to the planar situation--the minimiser in this setting is essentially unique.

Scientific assessment of the quality of OSIRIS images

Context. OSIRIS, the scientific imaging system onboard the ESA Rosetta spacecraft, has been imaging the nucleus of comet 67P/Churyumov-Gerasimenko and its dust and gas environment since March 2014. The images serve different scientific goals, from morphology and composition studies of the nucleus surface, to the motion and trajectories of dust grains, the general structure of the dust coma, the morphology and intensity of jets, gas distribution, mass loss, and dust and gas production rates. Aims. We present the calibration of the raw images taken by OSIRIS and address the accuracy that we can expect in our scientific results based on the accuracy of the calibration steps that we have performed. Methods. We describe the pipeline that has been developed to automatically calibrate the OSIRIS images. Through a series of steps, radiometrically calibrated and distortion corrected images are produced and can be used for scientific studies. Calibration campaigns were run on the ground before launch and throughout the years in flight to determine the parameters that are used to calibrate the images and to verify their evolution with time. We describe how these parameters were determined and we address their accuracy. Results. We provide a guideline to the level of trust that can be put into the various studies performed with OSIRIS images, based on the accuracy of the image calibration.

The Decrease in Summer Surface Water Temperature with Altitude in Swiss Alpine Lakes: A Comparison with Air Temperature Lapse Rates

Using miniature thermistors with integrated data loggers, the decrease in summer lake surface water temperature (LSWT) with increasing altitude a.s.l. was investigated in 10 Swiss Alpine lakes located between 613 m a.s.l. and 2339 m a.s.l. The LSWTs exhibit essentially the same short-term structure as regional air temperature, but are about 3 to 5°C higher than the air temperature at the altitude of the lake. LSWTs decrease approximately linearly with increasing altitude at a rate slightly greater than the surface air temperature lapse rate. Diel variations in LSWT are large, implying that single water temperature measurements are un- likely to be representative of the mean. Local factors will affect LSWT more than they affect air temperature, possibly resulting in severe distortion of the empirical relationship between the two. Several implications for paleoclimate reconstruction studies result. (1) Paleolimnologically reconstructed LSWTs are likely to be higher than the air temperatures prevailing at the altitude of the lake. (2) Lakes used for paleoclimate reconstruction should be selected to minimize local effects on LSWT. (3) The calibration of organism-specific quantitative paleotemperature inference models should not be based on single water temperature measurements. (4) Consideration should be given to calibrating such models directly against air temperature rather than water temperature. (5) The primary climate effect on the aquatic biota of high-altitude lakes may be mediated by the timing of the ice cover.

Digital Vertical Aerial Camera System for High-resolution Site Inspections in Conservation Easment Monitoring

A three-level satellite to ground monitoring scheme for conservation easement monitoring has been implemented in which high-resolution imagery serves as an intermediate step for inspecting high priority sites. A digital vertical aerial camera system was developed to fulfill the need for an economical source of imagery for this intermediate step. A method for attaching the camera system to small aircraft was designed, and the camera system was calibrated and tested. To ensure that the images obtained were of suitable quality for use in Level 2 inspections, rectified imagery was required to provide positional accuracy of 5 meters or less to be comparable to current commercially available high-resolution satellite imagery. Focal length calibration was performed to discover the infinity focal length at two lens settings (24mm and 35mm) with a precision of O.1mm. Known focal length is required for creation of navigation points representing locations to be photographed (waypoints). Photographing an object of known size at distances on a test range allowed estimates of focal lengths of 25.lmm and 35.4mm for the 24mm and 35mm lens settings, respectively. Constants required for distortion removal procedures were obtained using analytical plumb-line calibration procedures for both lens settings, with mild distortion at the 24mm setting and virtually no distortion found at the 35mm setting. The system was designed to operate in a series of stages: mission planning, mission execution, and post-mission processing. During mission planning, waypoints were created using custom tools in geographic information system (GIs) software. During mission execution, the camera is connected to a laptop computer with a global positioning system (GPS) receiver attached. Customized mobile GIs software accepts position information from the GPS receiver, provides information for navigation, and automatically triggers the camera upon reaching the desired location. Post-mission processing (rectification) of imagery for removal of lens distortion effects, correction of imagery for horizontal displacement due to terrain variations (relief displacement), and relating the images to ground coordinates were performed with no more than a second-order polynomial warping function. Accuracy testing was performed to verify the positional accuracy capabilities of the system in an ideal-case scenario as well as a real-world case. Using many welldistributed and highly accurate control points on flat terrain, the rectified images yielded median positional accuracy of 0.3 meters. Imagery captured over commercial forestland with varying terrain in eastern Maine, rectified to digital orthophoto quadrangles, yielded median positional accuracies of 2.3 meters with accuracies of 3.1 meters or better in 75 percent of measurements made. These accuracies were well within performance requirements. The images from the digital camera system are of high quality, displaying significant detail at common flying heights. At common flying heights the ground resolution of the camera system ranges between 0.07 meters and 0.67 meters per pixel, satisfying the requirement that imagery be of comparable resolution to current highresolution satellite imagery. Due to the high resolution of the imagery, the positional accuracy attainable, and the convenience with which it is operated, the digital aerial camera system developed is a potentially cost-effective solution for use in the intermediate step of a satellite to ground conservation easement monitoring scheme.

The Effect of Broadleaf Canopies on Survey-grade Horizontal GPS/GLONASS Measurements

A study was conducted to empirically determine the degradation of survey-grade GPS horizontal position measurements due to the effects of broadleaf forest canopies. The measurements were taken using GPS/GLONASS-capable receivers measuring C/A and P-codes, and carrier phase. Fourteen survey markers were chosen in central Connecticut to serve as reference markers for the study. These markers had varying degrees of sky obstruction due to overhanging tree canopies. Sky obstruction was measured by photographing the sky with a 35mm reflex camera fitted with a hemispherical lens. The negative was scanned and the image mapped using an equal- area projection to remove the distortion caused by the lens. The resulting digital image was thresholded to produce a black-and-white image in which a count of the black pixels is a measure of sky-area obstruction. The locations of the markers were determined independently before the study. During the study, each marker was occupied for four 20-minute sessions over the period of one week in mid-July, 1999. The location of the study markers produced relatively long baselines, as compared with similar studies. We compared the accuracy of GPS-only vs. GPS&GLONASS as a function of sky obstruction. Based on our results, GLONASS observations did not improve or degrade the accuracy of the position measurements. There is a loss of 2mm of accuracy per percent of sky obstruction for both GPS only and GPS&GLONASS.

Total Factor Productivity, Human Capital and Outward Orientation: Differences by Stage of Ddevelopment and Geographic Regions

Do openness and human capital accumulation promote economic growth? While intuition argues yes, the existing empirical evidence provides mixed support for such assertions. We examine Cobb-Douglas production function specifications for a 30-year panel of 83 countries representing all regions of the world and all income groups. We estimate and compare labor and capital elasticities of output per worker across each of several income and geographic groups, finding significant differences in production technology. Then we estimate the total factor productivity series for each classification. Using determinants of total factor productivity that include, among many others, human capital, openness, and distortion of domestic prices relative to world prices, we find significant differences in results between the overall sample and sub-samples of countries. In particular, a policy of outward orientation may or may not promote growth in specific country groups. even if geared to reducing price distortion and increasing openness. Human capital plays a smaller role in enhancing growth through total factor productivity.

Liquidity Constraint and Child Labor In India: Is Market Really Incapable Of Eradicating It From Wage-Labor Households?

One way to measure the lower steady state equilibrium outcome in human capital development is the incidence of child labor in most of the developing countries. With the help of Indian household level data in an overlapping generation framework, we show that production loans under credit rationing are not optimally extended towards firms because of issues with adverse selection. More stringent rationing in the credit market creates a distortion in the labor market by increasing adult wage rate and the demand for child labor. Lower availability of funds under stringent rationing coupled with increased demand for loans induces the high risk firms to replace adult labor by child labor. A switch of regime from credit rationing to revelation regime can clear such imperfections in the labor market. The equilibrium higher wage rate elevates the household consumption to a significantly higher level than the subsistence under credit rationing and therefore higher level of human capital development is assured leading to no supply of child labor.

Multiple gradient echo propeller (MGREP) MRI: Technical development and potential applications

The PROPELLER (Periodically Rotated Overlapping Parallel Lines with Enhanced Reconstruction) magnetic resonance imaging (MRI) technique has inherent advantages over other fast imaging methods, including robust motion correction, reduced image distortion, and resistance to off-resonance effects. These features make PROPELLER highly desirable for T2*-sensitive imaging, high-resolution diffusion imaging, and many other applications. However, PROPELLER has been predominantly implemented as a fast spin-echo (FSE) technique, which is insensitive to T2* contrast, and requires time-inefficient signal averaging to achieve adequate signal-to-noise ratio (SNR) for many applications. These issues presently constrain the potential clinical utility of FSE-based PROPELLER. ^ In this research, our aim was to extend and enhance the potential applications of PROPELLER MRI by developing a novel multiple gradient echo PROPELLER (MGREP) technique that can overcome the aforementioned limitations. The MGREP pulse sequence was designed to acquire multiple gradient-echo images simultaneously, without any increase in total scan time or RF energy deposition relative to FSE-based PROPELLER. A new parameter was also introduced for direct user-control over gradient echo spacing, to allow variable sensitivity to T2* contrast. In parallel to pulse sequence development, an improved algorithm for motion correction was also developed and evaluated against the established method through extensive simulations. The potential advantages of MGREP over FSE-based PROPELLER were illustrated via three specific applications: (1) quantitative T2* measurement, (2) time-efficient signal averaging, and (3) high-resolution diffusion imaging. Relative to the FSE-PROPELLER method, the MGREP sequence was found to yield quantitative T2* values, increase SNR by ∼40% without any increase in acquisition time or RF energy deposition, and noticeably improve image quality in high-resolution diffusion maps. In addition, the new motion algorithm was found to improve the performance considerably in motion-artifact reduction. ^ Overall, this work demonstrated a number of enhancements and extensions to existing PROPELLER techniques. The new technical capabilities of PROPELLER imaging, developed in this thesis research, are expected to serve as the foundation for further expanding the scope of PROPELLER applications. ^

The relationship between body image and physical activity in African American women

High rates of overweight and obesity in African American women have been attributed, in part, to poor health habits, such as physical inactivity, and cultural influences on body image perceptions. The purpose of this study was to determine the relationship among body mass index (BMI=kg/m2), body image perception (perceived and desired) and physical activity, both self-reported and objectively measured. Anthropometric measures of BMI and Pulvers' culturally relevant body image, physical activity and demographic data were collected from 249 African American women in Houston. Women ( M = 44.8 yrs, SD = 9.5) were educated (53% college graduates) and were overweight (M = 35.0 kg/m2, SD = 9.2). Less than half of women perceived their weight correctly regardless of their actual weight (p < 0.001). Nearly three-fourths (73.9%) of women who were normal weight desired to be obese, and only 39.4% of women desired to be normal weight, regardless of actual or perceived weight. Women in all weight classes (normal, overweight and obese) varied in objective measures of physical activity (F(2,112) = 4.424, p = .014). Regression analyses showed objectively measured physical activity was significantly associated with BMI ( Beta = -2.45, p < .01) and self-reported walking was significantly associated with perceived BMI (Beta = -.156, p = .017). Results suggest African American women who are smaller want to be larger and African American women who are larger want to be smaller, revealing dichotomous distortion in body images. Low rates of physical activity may be a factor. Research is needed to increase physical activity levels in African American women, leading to improved satisfaction with normal weight as desirable for health and beauty. Supported by NCI (NIH) 1R01CA109403. ^

Expression and function of $\beta$-1,4-galactosyltransferase during wild-type and T/{\it t\/} -mutant spermatogenesis

In the mouse, gamete recognition is mediated in part by the binding of sperm surface $\beta$1,4 galactosyltransferase (GalTase) to specific oligosaccharide residues on the zona pellucida ZP3. The expression of GalTase on the sperm surface is regulated by alleles within the distal segment of the T/t complex and results in a haploid-specific increase in GalTase expression on spermatids and sperm from t-bearing males, suggesting that differences in sperm GalTase activity may contribute to t-sperm transmission ratio distortion. In this study, the expression of GalTase RNA during wild-type and T/t-mutant spermatogenesis was characterized and the role of GalTase was analyzed in transmission ratio distortion. It was found that spermatogenic cells predominantly express the long form of the GalTase RNA, which encodes the GalTase protein that is preferentially targeted to the cell surface in somatic cells. In wild-type testes, GalTase RNA accumulates during the maturation of primary spermatocytes, reaches peak levels prior to meiosis, and decreases and meiosis. GalTase RNA accumulates to similar levels during the maturation of +/t and t/t primary spermatocytes, but unlike wild-type, the level of GalTase RNA in t-spermatocytes remains elevated during meiotic division. Consequently, spermatids in t-mutant testes inherit higher levels of GalTase RNA than do wild-type spermatids, which likely accounts for the haploid-specific increase in surface GalTase activity characteristic of spermatids from t-bearing mice.^ The functional significance of the increased GalTase activity during t-sperm transmission ratio distortion was determined by examining the distribution of GalTase RNA and surface GalTase protein in haploid spermatids from +/t males. Results show that +- and t-spermatids have similar levels of both GalTase RNA and protein, indicating that transmission ratio distortion in +/t mice is not likely due to haploid-specific differences in sperm surface GalTase activity.^ The presence of GalTase on the surface of an early spermatogenic cells before it is required on the mature sperm to perform its function during gamete binding suggests a separate function for GalTase in Sertoli-germ cell adhesion. Studies indicate that cell surface GalTase partly mediates the initial adhesion of pachytene spermatocytes, but not haploid spermatids, to Sertoli cells. ^

Effect of Certified Organic Products on Soybean Aphid

The soybean aphid (Aphis glycines), native to China, has become the most economically damaging insect in soybeans in northeast Iowa. Soybean aphid may have up to 18 generations per year, beginning with overwintering eggs on the alternate host buckthorn. In spring, winged aphids migrate from buckthorn to nearby emerged soybeans. Generations advance in these fields, and then another winged migration occurs in summer spreading from these fields to others. A third migration occurs in fall with aphids moving back to buckthorn. Depending on the season, soybean proximity to buckthorn, and soybean aphid migration patterns, populations of aphids tend to peak in soybeans anywhere from late July to early September. With higher aphid populations, the production of honeydew (the excrement of the aphid) and the resulting black fungus that grows on it (sooty mold) may become apparent. Aphid feeding may cause stunted plants, reduced pods and seeds, and may also transmit viruses that could cause mottling and distortion of leaves, reduced seed set, and discolored seeds.

Text Comprehension And roduction in University Students: Text Reformulation

This paper sets out to report on findings about features of task-specific reformulation observed in university students in the middle stretch of the Psychology degree course (N=58) and in a reference group of students from the degree courses in Modern Languages, Spanish and Library Studies (N=33) from the National University of La Plata (Argentina). Three types of reformulation were modeled: summary reformulation, comprehensive and productive reformulation.The study was based on a corpus of 621 reformulations rendered from different kinds of text. The versions obtained were categorised according to the following criteria: presence or absence of normative, morphosyntactic and semantic difficulties. Findings show that problems arise particularly with paraphrase and summary writing. Observation showed difficulties concerning punctuation, text cohesion and coherence , and semantic distortion or omission as regards extracting and/or substituting gist, with limited lexical resources and confusion as to suitability of style/register in writing. The findings in this study match those of earlier, more comprehensive research on the issue and report on problems experienced by a significant number of university students when interacting with both academic texts and others of a general nature. Moreover, they led to questions, on the one hand, as to the nature of such difficulties, which appear to be production-related problems and indirectly account for inadequate text comprehension, and on the other hand, as to the features of university tuition when it comes to text handling.