Antifungal activity of extracts from Atacama Desert fungi against Paracoccidioides brasiliensis and identification of Aspergillus felis as a promising source of natural bioactive compounds

Fungi of the genus Paracoccidioides are responsible for paracoccidioidomycosis. The occurrence of drug toxicity and relapse in this disease justify the development of new antifungal agents. Compounds extracted from fungal extract have showing antifungal activity. Extracts of 78 fungi isolated from rocks of the Atacama Desert were tested in a microdilution assay against Paracoccidioides brasiliensis Pb18. Approximately 18% (5) of the extracts showed minimum inhibitory concentration (MIC) values ≤ 125.0 μg/mL. Among these, extract from the fungus UFMGCB 8030 demonstrated the best results, with an MIC of 15.6 μg/mL. This isolate was identified as Aspergillus felis (by macro and micromorphologies, and internal transcribed spacer, β-tubulin, and ribosomal polymerase II gene analyses) and was grown in five different culture media and extracted with various solvents to optimise its antifungal activity. Potato dextrose agar culture and dichloromethane extraction resulted in an MIC of 1.9 μg/mL against P. brasiliensis and did not show cytotoxicity at the concentrations tested in normal mammalian cell (Vero). This extract was subjected to bioassay-guided fractionation using analytical C18RP-high-performance liquid chromatography (HPLC) and an antifungal assay using P. brasiliensis. Analysis of the active fractions by HPLC-high resolution mass spectrometry allowed us to identify the antifungal agents present in the A. felis extracts cytochalasins. These results reveal the potential of A. felis as a producer of bioactive compounds with antifungal activity.

Cork structural characteristics and their influence on the oxygen ingress through wine stoppers

Doutoramento em Engenharia Florestal e dos Recursos Naturais - Instituto Superior de Agronomia - UL

Análise de DFA e de agrupamento do perfil de densidade de poços de petróleo

In recent years, the DFA introduced by Peng, was established as an important tool capable of detecting long-range autocorrelation in time series with non-stationary. This technique has been successfully applied to various areas such as: Econophysics, Biophysics, Medicine, Physics and Climatology. In this study, we used the DFA technique to obtain the Hurst exponent (H) of the profile of electric density profile (RHOB) of 53 wells resulting from the Field School of Namorados. In this work we want to know if we can or not use H to spatially characterize the spatial data field. Two cases arise: In the first a set of H reflects the local geology, with wells that are geographically closer showing similar H, and then one can use H in geostatistical procedures. In the second case each well has its proper H and the information of the well are uncorrelated, the profiles show only random fluctuations in H that do not show any spatial structure. Cluster analysis is a method widely used in carrying out statistical analysis. In this work we use the non-hierarchy method of k-means. In order to verify whether a set of data generated by the k-means method shows spatial patterns, we create the parameter Ω (index of neighborhood). High Ω shows more aggregated data, low Ω indicates dispersed or data without spatial correlation. With help of this index and the method of Monte Carlo. Using Ω index we verify that random cluster data shows a distribution of Ω that is lower than actual cluster Ω. Thus we conclude that the data of H obtained in 53 wells are grouped and can be used to characterize space patterns. The analysis of curves level confirmed the results of the k-means

Création de mutants cdc5 en vue de l’identification des substrats de PLK/Cdc5 lors de la réponse d’adaptation aux dommages à l’ADN.

Les kinases de la famille Polo (PLK) jouent un rôle majeur durant le cycle cellulaire, notamment en promouvant des processus essentiels tels que l’entrée en phase M et la sortie du cycle cellulaire. Elles sont également impliquées dans plusieurs cancers et ont un fort pouvoir tumorigène. Notre laboratoire a récemment montré que Cdc5 (la kinase PLK chez Saccharomyces cerevisiae) est également nécessaire pour l'adaptation aux dommages à l'ADN, et que la cible critique de Cdc5 au cours de ce processus pourrait être une cible peu conventionnelle localisée aux centrosomes de levures. Dans le but d’identifier ce substrat, une analyse intégrale du phosphoprotéome de PLK/Cdc5 par spectrométrie de masse devra être réalisée. Pour ce faire, un allèle CDC5 sensible à la température, c’est-à-dire une version mutante qui devient inactive à température élevée, devra être utilisée. Cet allèle devra être thermosensible à 30°C, afin de s’assurer qu’il sera le seul à être inactivé à cette température et que, par conséquent, seuls les substrats de Cdc5 seront identifiés. À cet effet, nous avons généré deux allèles cdc5 thermosensibles à 30°C : cdc5-17 et cdc5-18, puis analysé leur cycle cellulaire à 32°C. Les résultats de cette analyse ont montré que l’exposition des cellules à 32°C résulte en leur blocage en fin de mitose sous la forme bourgeonnée, témoignant d’un défaut dans la promotion de la sortie de la mitose. Ce défaut est causé par la mutation du gène CDC5 dont la protéine favorise la sortie de la mitose via deux voies : la voie du MEN (Mitotic Exit Network) et la voie du FEAR (Cdc Fourteen Early Anaphase Release). cdc5-17 et cdc5-18 représentent des outils biologiques précieux qui permettront de mieux analyser le phosphoprotéome de PLK/Cdc5 et de mener à l’identification des cibles de Cdc5 lors de la réponse d’adaptation aux dommages à l’ADN. Étant donné que l’adaptation aux dommages à l’ADN causés par des chimiothérapies représente l’un des facteurs permettant la prolifération des tumeurs cancéreuses, cette découverte serait un grand pas dans la lutte contre le cancer.

Création de mutants cdc5 en vue de l’identification des substrats de PLK/Cdc5 lors de la réponse d’adaptation aux dommages à l’ADN

Les kinases de la famille Polo (PLK) jouent un rôle majeur durant le cycle cellulaire, notamment en promouvant des processus essentiels tels que l’entrée en phase M et la sortie du cycle cellulaire. Elles sont également impliquées dans plusieurs cancers et ont un fort pouvoir tumorigène. Notre laboratoire a récemment montré que Cdc5 (la kinase PLK chez Saccharomyces cerevisiae) est également nécessaire pour l'adaptation aux dommages à l'ADN, et que la cible critique de Cdc5 au cours de ce processus pourrait être une cible peu conventionnelle localisée aux centrosomes de levures. Dans le but d’identifier ce substrat, une analyse intégrale du phosphoprotéome de PLK/Cdc5 par spectrométrie de masse devra être réalisée. Pour ce faire, un allèle CDC5 sensible à la température, c’est-à-dire une version mutante qui devient inactive à température élevée, devra être utilisée. Cet allèle devra être thermosensible à 30°C, afin de s’assurer qu’il sera le seul à être inactivé à cette température et que, par conséquent, seuls les substrats de Cdc5 seront identifiés. À cet effet, nous avons généré deux allèles cdc5 thermosensibles à 30°C : cdc5-17 et cdc5-18, puis analysé leur cycle cellulaire à 32°C. Les résultats de cette analyse ont montré que l’exposition des cellules à 32°C résulte en leur blocage en fin de mitose sous la forme bourgeonnée, témoignant d’un défaut dans la promotion de la sortie de la mitose. Ce défaut est causé par la mutation du gène CDC5 dont la protéine favorise la sortie de la mitose via deux voies : la voie du MEN (Mitotic Exit Network) et la voie du FEAR (Cdc Fourteen Early Anaphase Release). cdc5-17 et cdc5-18 représentent des outils biologiques précieux qui permettront de mieux analyser le phosphoprotéome de PLK/Cdc5 et de mener à l’identification des cibles de Cdc5 lors de la réponse d’adaptation aux dommages à l’ADN. Étant donné que l’adaptation aux dommages à l’ADN causés par des chimiothérapies représente l’un des facteurs permettant la prolifération des tumeurs cancéreuses, cette découverte serait un grand pas dans la lutte contre le cancer.

The Epidemiology and Health Economics of Ankle Injuries

Thesis (Ph.D, Community Health & Epidemiology) -- Queen's University, 2016-10-03 22:59:05.858

Guía de práctica clínica para la enfermedad hepática grasa no alcohólica

Objetivo: Brindar una guía de práctica clínica basada con la evidencia más reciente para el diagnóstico y tratamiento de la Enfermedad Hepática Grasa No alcohólica teniendo en cuenta la efectividad y seguridad de las intervenciones dirigidas a pacientes, personal asistencial, administrativo y entes gubernamentales de cualquier servicio de atención en Colombia. Materiales y métodos: Esta guía fue desarrollada por un equipo multidisciplinario con apoyo de la Asociación Colombiana de Gastroenterología, el Grupo Cochrane ITS y el Instituto de Investigaciones Clínicas de la Universidad Nacional de Colombia. Se desarrollaron preguntas clínicas relevantes y se realizó la búsqueda de guías nacionales e internacionales en bases de datos especializadas. Las guías existentes fueron evaluadas en términos de calidad y aplicabilidad. Una guía cumplió los criterios de adaptación, por lo que se decidió adaptar 3 preguntas clínicas. El Grupo Cochrane realizó la búsqueda sistemática de la literatura. Las tablas de evidencia y recomendaciones fueron realizadas con base a la metodología GRADE. Las recomendaciones de la guía fueron socializadas en una reunión de expertos con entes gubernamentales y pacientes. Resultados: Se desarrolló una guía de práctica clínica basada en la evidencia para el diagnóstico y tratamiento de la Enfermedad Hepática Grasa No alcohólica en Colombia Conclusiones: El diagnóstico y manejo oportuno de la Enfermedad Hepática Grasa No alcohólica contribuirá a disminuir la carga de la enfermedad en Colombia y las enfermedades asociadas

Jóvenes en la sociedad del miedo: miradas sobre medios, miedos y jóvenes en el Ecuador

ResumenSe plantea un análisis de la mirada de miedo e inseguridad que los medios de comunicación construyen en relación a los y las jóvenes y a las culturas juveniles en el Ecuador. A partir dela referencia al tratamiento del incendio de la discoteca Factory en el transcurso de un concierto de rock en abril del 2008, en la ciudad de Quito. La mirada de los medios contribuye a la construcción del miedo social hacia las personas jóvenes. Finalmente, se plantea que la mirada de los estudios culturales en relación con temas de juventud permite superar formas tradicionales de tratar este tema, precisamente por su naturaleza interdisciplinar.Palabras clave: culturas juveniles, jóvenes, medios de comunicación, miedo social, Ecuador.AbstractAn analysis on the view of fear and insecurity that mass media builds in relation with young people and juvenile cultures from the analysis of the treatment of the fire at the “Factory” discotheque duringa rock concert in Quito on April 2008, is proposed. It is proposed that the mass media’s outlook contributes to the social construction of the social fear towards young people. Finally, it is stated thatthe perspective of cultural studies on youth topics break off traditional forms of dealing with the topic due to tis interdisciplinary nature.Keywords: juvenile cultures, youth, mass media, social fear, Ecuador.

A genome editing approach to the study of Parvovirus B19

Parvovirus B19 (B19V) is a ssDNA virus, with a 5596 nt long genome encapsidated within an icosahedral capsid with a diameter of 22 nm. Viral proteins are subdivided into structural and non-structural: the main non-structural one is the NS1, while the 2 structural proteins VP1 and VP2 assemble originating the capsid shell. B19V tropism is mainly limited to erythroid progenitor cells (EPCs), however, virus can be detected in several districts persisting in tissues possibly lifelong. The virus can induce anemia and erythroid aplasia. Therapeutic strategies are only symptomatic, so the search for antivirals is strongly active, with screenings showing the activity in vitro of different compounds like hydroxyurea, cidofovir and brincidofovir. In the first project, a functional minigenome of B19V was developed, able to express only the NS1 protein. This minigenome proved able to replicate and express the NS1 at levels comparable to unmodified clones. Furthermore, the ability of this minigenome to complement the function of NS1-deficient genomes was demonstrated, thus providing a proof-of-concept of B19V genome editing possibility and, at the same time, a useful tool to study the NS1 protein also as an antiviral target. In the second project I addressed the interplay between B19V and the cellular restriction factor APOBEC3B (A3B), a cytidine deaminase acting on ssDNA, whose footprint on B19V genome was proved by a bioinformatic sequence analysis performed by the hosting lab. To understand whether A3B still exerts activity and a potential antiviral effect on B19V, the UT7/EpoS1 cells were transduced with lentiviral vectors to silence A3B expression, then used as a model to study viral behavior. No significant role of A3B on B19V was demonstrated, in agreement with the hypothesis of viral adaptation to this cellular restriction factor; anyway, virus ability to alter A3B expression would deserve further investigations.

Correlations between cardiac magnetic resonance and histologic findings in Anderson Fabry disease

ABSTRACT Background Cardiac magnetic resonance (CMR) has been shown as promising diagnostic tool in Anderson-Fabry disease (AFD) cardiomyopathy due to its ability to detect fat deposits through lower native T1 values. However no histological validation has been provided to date. Objectives To correlate CMR and histologic findings in different cardiac stages of AFD focusing on T1 mapping. Methods Fifteen AFD patients (49 years [IQR 39-63], 60% females) undergoing CMR (cines, native T1 and T2 mapping, LGE and post-contrast T1 imaging) and endomyocardial biopsy (EMB, n=11) or septal myectomy (n=4), were retrospectively evaluated. Tissue specimens were analyzed with light/electron microscopy and vacuolization amount calculated as percentages of vacuolated myocytes and vacuolated myocyte area (%VMA) through a quantitative histomorphometric color-based analysis. Results In patients without increased indexed left ventricular mass (LVMi) at CMR (67%), T1 fell as %VMA increased (r= -0.883; p<0.001), whereas no clear relationship was evident once increased LVMi occurred (r= -0.501; p=0.389). At least 45% of vacuolized myocytes and 10% of VMA were needed for low T1 to occur. %VMA positively correlate with maximal wall thickness (MWT, r=0.860, p<0.0001) and LVMi (r= 0.762; p<0.001). Increased MWT and LVMi were present with at least 45% and 80% of vacuolated myocytes, respectively, and 18% and 22% of VMA. Conclusions This study demonstrated an inverse correlation between native T1 and the vacuolization amount in patients without increased LVMi at CMR, providing a histological validation of low native T1 in AFD. Importantly, a significant vacuolization burden was needed before low T1 and left ventricle hypertrophy occurred.

Nonlinear modelling of non-structural masonry walls under a low-intensity earthquake motion: calibration through a parametric study

This thesis aims to understand the behavior of a low-rise unreinforced masonry building (URM), the typical residential house in the Netherlands, when subjected to low-intensity earthquakes. In fact, in the last decades, the Groningen region was hit by several shallow earthquakes caused by the extraction of natural gas. In particular, the focus is addressed to the internal non-structural walls and to their interaction with the structural parts of the building. A simple and cost-efficient 2D FEM model is developed, focused on the interfaces representing mortar layers that are present between the non-structural walls and the rest of the structure. As a reference for geometries and materials, it has been taken into consideration a prototype that was built in full-scale at the EUCENTRE laboratory of Pavia (Italy). Firstly, a quasi-static analysis is performed by gradually applying a prescribed displacement on the roof floor of the structure. Sensitivity analyses are conducted on some key parameters characterizing mortar. This analysis allows for the calibration of their values and the evaluation of the reliability of the model. Successively, a transient analysis is performed to effectively subject the model to a seismic action and hence also evaluate the mechanical response of the building over time. Moreover, it was possible to compare the results of this analysis with the displacements recorded in the experimental tests by creating a model representing the entire considered structure. As a result, some conditions for the model calibration are defined. The reliability of the model is then confirmed by both the reasonable results obtained from the sensitivity analysis and the compatibility of the values obtained for the top displacement of the roof floor of the experimental test, and the same value acquired from the structural model.

Data-driven Signal Processing per Jamming Detection in Sistemi Satellitari

In questo elaborato vengono analizzate differenti tecniche per la detection di jammer attivi e costanti in una comunicazione satellitare in uplink. Osservando un numero limitato di campioni ricevuti si vuole identificare la presenza di un jammer. A tal fine sono stati implementati i seguenti classificatori binari: support vector machine (SVM), multilayer perceptron (MLP), spectrum guarding e autoencoder. Questi algoritmi di apprendimento automatico dipendono dalle features che ricevono in ingresso, per questo motivo è stata posta particolare attenzione alla loro scelta. A tal fine, sono state confrontate le accuratezze ottenute dai detector addestrati utilizzando differenti tipologie di informazione come: i segnali grezzi nel tempo, le statistical features, le trasformate wavelet e lo spettro ciclico. I pattern prodotti dall’estrazione di queste features dai segnali satellitari possono avere dimensioni elevate, quindi, prima della detection, vengono utilizzati i seguenti algoritmi per la riduzione della dimensionalità: principal component analysis (PCA) e linear discriminant analysis (LDA). Lo scopo di tale processo non è quello di eliminare le features meno rilevanti, ma combinarle in modo da preservare al massimo l’informazione, evitando problemi di overfitting e underfitting. Le simulazioni numeriche effettuate hanno evidenziato come lo spettro ciclico sia in grado di fornire le features migliori per la detection producendo però pattern di dimensioni elevate, per questo motivo è stato necessario l’utilizzo di algoritmi di riduzione della dimensionalità. In particolare, l'algoritmo PCA è stato in grado di estrarre delle informazioni migliori rispetto a LDA, le cui accuratezze risentivano troppo del tipo di jammer utilizzato nella fase di addestramento. Infine, l’algoritmo che ha fornito le prestazioni migliori è stato il Multilayer Perceptron che ha richiesto tempi di addestramento contenuti e dei valori di accuratezza elevati.

Radiometric analysis of the light coupled by optimally cut plastic optical fiber amplitude modulating reflectance displacement sensors

A radiometric analysis of the light coupled by optical fiber amplitude modulating extrinsic-type reflectance displacement sensors is presented. Uncut fiber sensors show the largest range but a smaller responsivity. Single cut fiber sensors exhibit an improvement in responsivity at the expense of range. A further increase in responsivity as well as a reduction in the operational range is obtained when the double cut sensor configuration is implemented. The double cut configuration is particularly suitable in applications where feedback action is applied to the moving reflector surface. © 2000 American Institute of Physics.

Road Design for Future Maintenance : Life-cycle Cost Analyses for Road Barriers

The cost of a road construction over its service life is a function of design, quality of construction as well as maintenance strategies and operations. An optimal life-cycle cost for a road requires evaluations of the above mentioned components. Unfortunately, road designers often neglect a very important aspect, namely, the possibility to perform future maintenance activities. Focus is mainly directed towards other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This doctoral thesis presents the results of a research project aimed to increase consideration of road maintenance aspects in the planning and design process. The following subgoals were established: Identify the obstacles that prevent adequate consideration of future maintenance during the road planning and design process; and Examine optimisation of life-cycle costs as an approach towards increased efficiency during the road planning and design process. The research project started with a literature review aimed at evaluating the extent to which maintenance aspects are considered during road planning and design as an improvement potential for maintenance efficiency. Efforts made by road authorities to increase efficiency, especially maintenance efficiency, were evaluated. The results indicated that all the evaluated efforts had one thing in common, namely ignorance of the interrelationship between geometrical road design and maintenance as an effective tool to increase maintenance efficiency. Focus has mainly been on improving operating practises and maintenance procedures. This fact might also explain why some efforts to increase maintenance efficiency have been less successful. An investigation was conducted to identify the problems and difficulties, which obstruct due consideration of maintainability during the road planning and design process. A method called “Change Analysis” was used to analyse data collected during interviews with experts in road design and maintenance. The study indicated a complex combination of problems which result in inadequate consideration of maintenance aspects when planning and designing roads. The identified problems were classified into six categories: insufficient consulting, insufficient knowledge, regulations and specifications without consideration of maintenance aspects, insufficient planning and design activities, inadequate organisation and demands from other authorities. Several urgent needs for changes to eliminate these problems were identified. One of the problems identified in the above mentioned study as an obstacle for due consideration of maintenance aspects during road design was the absence of a model for calculating life-cycle costs for roads. Because of this lack of knowledge, the research project focused on implementing a new approach for calculating and analysing life-cycle costs for roads with emphasis on the relationship between road design and road maintainability. Road barriers were chosen as an example. The ambition is to develop this approach to cover other road components at a later stage. A study was conducted to quantify repair rates for barriers and associated repair costs as one of the major maintenance costs for road barriers. A method called “Case Study Research Method” was used to analyse the effect of several factors on barrier repairs costs, such as barrier type, road type, posted speed and seasonal effect. The analyses were based on documented data associated with 1625 repairs conducted in four different geographical regions in Sweden during 2006. A model for calculation of average repair costs per vehicle kilometres was created. Significant differences in the barrier repair costs were found between the studied barrier types. In another study, the injuries associated with road barrier collisions and the corresponding influencing factors were analysed. The analyses in this study were based on documented data from actual barrier collisions between 2005 and 2008 in Sweden. The result was used to calculate the cost for injuries associated with barrier collisions as a part of the socio-economic cost for road barriers. The results showed significant differences in the number of injuries associated with collisions with different barrier types. To calculate and analyse life-cycle costs for road barriers a new approach was developed based on a method called “Activity-based Life-cycle Costing”. By modelling uncertainties, the presented approach gives a possibility to identify and analyse factors crucial for optimising life-cycle costs. The study showed a great potential to increase road maintenance efficiency through road design. It also showed that road components with low investment costs might not be the best choice when including maintenance and socio-economic aspects. The difficulties and problems faced during the collection of data for calculating life-cycle costs for road barriers indicated a great need for improving current data collecting and archiving procedures. The research focused on Swedish road planning and design. However, the conclusions can be applied to other Nordic countries, where weather conditions and road design practices are similar. The general methodological approaches used in this research project may be applied also to other studies.

THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING

This thesis is composed of three life-cycle analysis (LCA) studies of manufacturing to determine cumulative energy demand (CED) and greenhouse gas emissions (GHG). The methods proposed could reduce the environmental impact by reducing the CED in three manufacturing processes. First, industrial symbiosis is proposed and a LCA is performed on both conventional 1 GW-scaled hydrogenated amorphous silicon (a-Si:H)-based single junction and a-Si:H/microcrystalline-Si:H tandem cell solar PV manufacturing plants and such plants coupled to silane recycling plants. Using a recycling process that results in a silane loss of only 17 versus 85 percent, this results in a CED savings of 81,700 GJ and 290,000 GJ per year for single and tandem junction plants, respectively. This recycling process reduces the cost of raw silane by 68 percent, or approximately $22.6 and $79 million per year for a single and tandem 1 GW PV production facility, respectively. The results show environmental benefits of silane recycling centered around a-Si:H-based PV manufacturing plants. Second, an open-source self-replicating rapid prototype or 3-D printer, the RepRap, has the potential to reduce the environmental impact of manufacturing of polymer-based products, using distributed manufacturing paradigm, which is further minimized by the use of PV and improvements in PV manufacturing. Using 3-D printers for manufacturing provides the ability to ultra-customize products and to change fill composition, which increases material efficiency. An LCA was performed on three polymer-based products to determine the CED and GHG from conventional large-scale production and are compared to experimental measurements on a RepRap producing identical products with ABS and PLA. The results of this LCA study indicate that the CED of manufacturing polymer products can possibly be reduced using distributed manufacturing with existing 3-D printers under 89% fill and reduced even further with a solar photovoltaic system. The results indicate that the ability of RepRaps to vary fill has the potential to diminish environmental impact on many products. Third, one additional way to improve the environmental performance of this distributed manufacturing system is to create the polymer filament feedstock for 3-D printers using post-consumer plastic bottles. An LCA was performed on the recycling of high density polyethylene (HDPE) using the RecycleBot. The results of the LCA showed that distributed recycling has a lower CED than the best-case scenario used for centralized recycling. If this process is applied to the HDPE currently recycled in the U.S., more than 100 million MJ of energy could be conserved per annum along with significant reductions in GHG. This presents a novel path to a future of distributed manufacturing suited for both the developed and developing world with reduced environmental impact. From improving manufacturing in the photovoltaic industry with the use of recycling to recycling and manufacturing plastic products within our own homes, each step reduces the impact on the environment. The three coupled projects presented here show a clear potential to reduce the environmental impact of manufacturing and other processes by implementing complimenting systems, which have environmental benefits of their own in order to achieve a compounding effect of reduced CED and GHG.