Development Paths In The Caribbean

This study analyzes the patterns of development in the Caribbean and gives particular focus to the challenges to and opportunities for sustainable development. The study is divided into two parts. The first part of the study examines trajectories for development in the Caribbean, while the second addresses the relationship between competition and integration.1 The significant development gains attained since independence have been threatened in the last decade. Slowing productivity growth, rising debt, increasing crime and social dislocation in recent years have adversely affected growth in per capita income and social welfare. The study therefore calls on policy makers to promote dynamic drivers of growth and development in the region. The key requirement in this regard, is the need to strengthen import productivity,2 or the efficiency with which the region uses foreign exchange. This can be done by producing and exporting more high-value services such as education and the output of the creative industries. The sub-region also needs to strengthen its systems of governance by providing more opportunities for citizens to participate in decision making. In addition, the region needs to address the inherent relationship between competition and integration by developing improved systems to cushion the negative impacts on weaker members of the integration arrangement. These could include a more robust development fund and capacity building to enable losers to benefit from regional trade and investment. However, regional integration should provide a platform for moving up the value chain, through research and development and innovation to produce more competitive exports.

Development strategies for the information and communications technology sector in the Caribbean: A global perspective

This occasional paper examines the experiences of three leading global centres of the ICT industry – India, Silicon Valley, and Estonia – to reflect on how the lessons of these models can be applied to the context of countries in the Caribbean region.Several sectors of the technology industry are considered in relation to the suitability for their establishment in the Caribbean. Animation is an area that is showing encouraging signs of development in several countries, and which offers some promise to provide a significant source of employment in the region. However, the global market for animation production is likely to become increasingly competitive, as improved technology has reduced barriers to entry into the industry not only in the Caribbean, but around the world. The region’s animation industry will need to move swiftly up the value chain if it is to avoid the downsides of being caught in an increasingly commoditized market. Mobile applications development has also been widely a heralded industry for the Caribbean. However, the market for consumer-oriented smartphone applications has matured very quickly, and is now a very difficult sector in which to compete. Caribbean mobile developers would be better served to focus on creating applications to suit the needs of regional industries and governments, rather than attempting to gain notice in over-saturated consumer marketplaces such as the iTunes App Store and Google Play. Another sector considered for the Caribbean is “big data” analysis. This area holds significant potential for growth in coming years, but the Caribbean, which is generally considered to be a datapoor region, currently lacks a sufficient base of local customers to form a competitive foundation for such an industry. While a Caribbean big data industry could plausibly be oriented toward outsourcing, that orientation would limit positive externalities from the sector, and benefits from its establishment would largely accrue only to a relatively small number of direct participants in the industry. Instead, development in the big data sector should be twinned with the development of products to build a regional customer base for the industry. The region has pressing needs in areas such as disaster risk reduction, water resource management, and support for agricultural production. Development of big data solutions – and other technology products – to address areas such as these could help to establish niche industries that both support the needs of local populations, and provide viable opportunities for the export of higher-value products and services to regions of the world with similar needs.

Distribution and availability of copper, iron, manganese and zinc in the archaeological black earth profile from the Amazon region

Os solos de terra preta arqueológica são ricos em matéria orgânica, contêm fragmentos cerâmicos e artefatos líticos e apresentam nutrientes em concentrações mais elevadas do que outros tipos de solos. Com o intuito de contribuir com informações sobre concentrações de micronutrientes disponíveis em solos de terra preta, foram avaliadas através de extrações químicas sequenciais, a distribuição e disponibilidade de Cu, Fe, Mn e Zn em um perfil de terra preta arqueológica no município de Juruti, estado do Pará. As maiores concentrações de Cu, Fe, Mn e Zn no perfil são encontradas na fração residual. Este estudo mostrou que ferro, manganês e zinco são preferencialmente disponíveis a partir das frações, associados aos óxidos de Fe-Mn, variando de 1265,39 a 1818,12 mg kg^-1, 0,83 a 48,51 mg kg^-1 e 1,92 a 12,05 mg kg^-1, respectivamente, e o cobre a partir da matéria orgânica, variando de 0,13 a 0,45 mg kg^-1.

Carcass quality of buffalo (Bubalus bubalis) finished in silvopastoral system in the Eastern Amazon, Brazil

Avaliou-se a influência da dieta sobre a qualidade de carcaça de búfalos mestiços das raças Murrah e Mediterrâneo, alimentados com concentrado tradicional - milho/soja - ou resíduos agroindustriais - tortas de coco e dendê. Os animais foram sacrificados em abatedouro comercial, e realizadas análises físicas e físico-químicas na carcaça, após 24 horas, e de cor e textura instrumentais no músculo Longissimus dorsi, após 48 horas de resfriamento. Os animais suplementados com a torta de dendê adquiriram melhor conformação de carcaça e acabamento de gordura, e observaram-se diferenças (P<0,05) no percentual de gordura na carcaça e na espessura de gordura de cobertura.

Gonadal development in the freshwater crab Sylviocarcinus pictus (H. Milne Edwards, 1853) (Brachyura: Trichodactylidae) from the Guamá river, state of Pará, Brazil

Os estádios de desenvolvimento das gônadas de machos e fêmeas de caranguejos Sylviocarcinus pictus (H. Milne Eduards, 1853) foram descritos por meio de observações macroscópicas e microscópicas (técnica histológica). A descrição histológica foi baseada em 40 espécimes (20 de cada sexo). Foram identificados quatro estádios de desenvolvimento para as fêmeas: imaturo, em maturação, maturo e em reabsorção. As seguintes células foram encontradas: ovogônias, ovócitos em vitelogênese inicial, ovócitos em vitelogênese avançada, células foliculares e folículos pós-ovulatórios. Três estádios de desenvolvimento foram encontrados para os machos: imaturo, em maturação e maturo, com indicação de: espermatogônias, espermatócitos, espermátides, espermatozóides e espermatóforos. Tais dados sugerem o padrão descrito na literatura. O tamanho da maturidade sexual foi de 32,3 mm de largura da carapaça para machos e 31,5 mm para fêmeas. Os estádios gonadais observados macroscopicamente por meio do volume e da coloração das gônadas foram validados pela análise histológica, sendo um critério útil e ágil para a identificação da maturidade sexual para a espécie. O presente estudo oferece informações inéditas sobre a biologia reprodutiva de Sylviocarcinus pictus.

The mineralogy and chemistry of the German and Portuguese tiles used to face a historic building in the Amazon region and their natural susceptibility to tropical weathering

As proeminentes edificações da cidade de Belém foram revestidas durante o século 19 com azulejos produzidos em Portugal e Alemanha que já apresentam distintos graus de degradação. O Palacete Pinho é uma das mais importantes destas edificações e foi selecionado para se investigar a ação do clima tropical amazônico sobre a degradação destes azulejos. Para atingir estes objetivos mapearam-se os azulejos desta edificação visando identificar as modificações de origem orgânica e inorgânica e coletas de amostras para análises. Os minerais foram determinados por DRX, a composição química por métodos clássicos úmidos e MEV/SED e os micro-organismos por microscopia. Os resultados obtidos mostram que os azulejos Portugueses e Alemães são distintos entre si. Enquanto o biscoito é composto de SiO₂ e Al₂O₃, CaO foi encontrado apenas nos Portugueses. Os baixos conteúdos de Na₂O e K₂O indicam adição de materiais para redução da temperatura de fusão. SiO₂ e PbO compõem o vidrado, já CoO e FeO foram adicionados como pigmentos. O biscoito dos azulejos Alemães é constituído de quartzo, mullita e cristobalita, ao contrário do Português com quartzo, gehlenita, diopsídio, calcita e feldspatos. Os vidrados são amorfos ao DRX. As diferenças químicas e mineralógicas entre os azulejos Portugueses e Alemães indicam que foram produzidos por matéria prima distinta, bem como processo termal. As alterações relacionadas com o intemperismo são as finas camadas de detritos (nos Alemães), manchas de oxidação, manchas escuras, descolamento do azulejo (no Português); perda de vidrado e biscoito tornando-se pulverulento como consequência do estabelecimento de Cyanophyta e bacillariophyta (Português). As distintas feições de degradação dos azulejos refletem as suas diferenças mineralógicas e químicas expostas ao clima tropical Amazônico.

Application of bauxite waste from amazon region in the heavy clay industry

In this work, a method was developed for the application of red mud, an alkaline leaching waste, from a bauxite processing plant located in northern Brazil (Amazon region) as starting material for heavy clay products. Samples were prepared by pressing blends of red mud and clay, which were then fired at temperatures from 900 ºC to 1190 ºC. Characterization was carried out by chemical analysis, differential thermal analysis (DTA) and X-ray diffraction (XRD), and the following ceramic properties were evaluated: water absorption, linear shrinkage and flexural strength. In order to evaluate the Na⁺ stability in the dense ceramic, leaching tests were also carried out on the specimens after sintering process. Results indicated that samples with 50 and 70 wt% of red mud are proper for being used in the production of ceramic bodies, due to its excellent properties, mainly high mechanical resistance and low water absorption, showing thus, an option to minimizing the environmental impacts caused by the aluminum industry.

A test of the utility of DNA barcoding in the radiation of the freshwater stingray genus Potamotrygon (Potamotrygonidae, Myliobatiformes)

DNA barcoding is a recently proposed global standard in taxonomy based on DNA sequences. The two main goals of DNA barcoding methodology are assignment of specimens to a species and discovery of new species. There are two main underlying assumptions: i) reciprocal monophyly of species, and ii) intraspecific divergence is always less than interspecific divergence. Here we present a phylogenetic analysis of the family Potamotrygonidae based on mitochondrial cytochrome c oxidase I gene, sampling 10 out of the 18 to 20 valid species including two non-described species. Potamotrygonidae systematics is still not fully resolved with several still-to-be-described species while some other species are difficult to delimit due to overlap in morphological characters and because of sharing a complex color patterns. Our results suggest that the family passed through a process of rapid speciation and that the species Potamotrygon motoro, P. scobina, and P. orbignyi share haplotypes extensively. Our results suggest that systems of identification of specimens based on DNA sequences, together with morphological and/or ecological characters, can aid taxonomic studies, but delimitation of new species based on threshold values of genetic distances are overly simplistic and misleading.

Valorization of sugarcane bagasse ash: Producing glass-ceramic materials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Surface Conditioning Modalities on the Repair Bond Strength of Resin Composite to the Zirconia Core / Veneering Ceramic Complex

Purpose: This study evaluated the effect of different surface conditioning protocols on the repair strength of resin composite to the zirconia core / veneering ceramic complex, simulating the clinical chipping phenomenon.Materials and Methods: Forty disk-shaped zirconia core (Lava Zirconia, 3M ESPE) (diameter: 3 mm) specimens were veneered circumferentially with a feldspathic veneering ceramic (VM7, Vita Zahnfabrik) (thickness: 2 mm) using a split metal mold. They were then embedded in autopolymerizing acrylic with the bonding surfaces exposed. Specimens were randomly assigned to one of the following surface conditioning protocols (n = 10 per group): group 1, veneer: 4% hydrofluoric acid (HF) (Porcelain Etch) + core: aluminum trioxide (50-mu m Al2O3) + core + veneer: silane (ESPE-Sil); group 2: core: Al2O3 (50 mu m) + veneer: HF + core + veneer: silane; group 3: veneer: HF + core: 30 mu m aluminum trioxide particles coated with silica (30 mu m SiO2) + core + veneer: silane; group 4: core: 30 mu m SiO2 + veneer: HF + core + veneer: silane. Core and veneer ceramic were conditioned individually but no attempt was made to avoid cross contamination of conditioning, simulating the clinical intraoral repair situation. Adhesive resin (VisioBond) was applied to both the core and the veneer ceramic, and resin composite (Quadrant Posterior) was bonded onto both substrates using polyethylene molds and photopolymerized. After thermocycling (6000 cycles, 5 degrees C-55 degrees C), the specimens were subjected to shear bond testing using a universal testing machine (1 mm/min). Failure modes were identified using an optical microscope, and scanning electron microscope images were obtained. Bond strength data (MPa) were analyzed statistically using the non-parametric Kruskal-Wallis test followed by the Wilcoxon rank-sum test and the Bonferroni Holm correction (alpha = 0.05).Results: Group 3 demonstrated significantly higher values (MPa) (8.6 +/- 2.7) than those of the other groups (3.2 +/- 3.1, 3.2 +/- 3, and 3.1 +/- 3.5 for groups 1, 2, and 4, respectively) (p < 0.001). All groups showed exclusively adhesive failure between the repair resin and the core zirconia. The incidence of cohesive failure in the ceramic was highest in group 3 (8 out of 10) compared to the other groups (0/10, 2/10, and 2/10, in groups 1, 2, and 4, respectively). SEM images showed that air abrasion on the zirconia core only also impinged on the veneering ceramic where the etching pattern was affected.Conclusion: Etching the veneer ceramic with HF gel and silica coating of the zirconia core followed by silanization of both substrates could be advised for the repair of the zirconia core / veneering ceramic complex.

Changes in the aroma of organic passion fruit (Passiflora edulis Sims f. flavicarpa Deg.) during ripeness

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preferential consumption of larger fruits of Piper arboreum (Piperaceae) by Carollia perspicillata (Phyllostomidae) in the Brazilian tropical dry forest

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Neural tool condition estimation in the grinding of advanced ceramics

Ceramic parts are increasingly replacing metal parts due to their excellent physical, chemical and mechanical properties, however they also make them difficult to manufacture by traditional machining methods. The developments carried out in this work are used to estimate tool wear during the grinding of advanced ceramics. The learning process was fed with data collected from a surface grinding machine with tangential diamond wheel and alumina ceramic test specimens, in three cutting configurations: with depths of cut of 120 mu m, 70 mu m and 20 mu m. The grinding wheel speed was 35m/s and the table speed 2.3m/s. Four neural models were evaluated, namely: Multilayer Perceptron, Radial Basis Function, Generalized Regression Neural Networks and the Adaptive Neuro-Fuzzy Inference System. The models'performance evaluation routines were executed automatically, testing all the possible combinations of inputs, number of neurons, number of layers, and spreading. The computational results reveal that the neural models were highly successful in estimating tool wear, since the errors were lower than 4%.

Study of ceramic block manufacture with the addition of waste from iron ore extraction

This work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks.

Ecological distribution of stream macroalgal communities from a drainage basin in the Serra da Canastra National Park, Minas Gerais, Southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)