Evaluation of an alternative spectroscopic approach for aflatoxin analysis: Comparative analysis of food and feed samples with UPLC-MS/MS

Increasing research has highlighted the effects of changing climates on the occurrence and prevalence of toxigenic Aspergillus species producing aflatoxins. There is concern of the toxicological effects to human health and animal productivity following acute and chronic exposure that may affect the future ability to provide safe and sufficient food globally. Considerable research has focused on the detection of these toxins, based on the physicochemical and biochemical properties of the aflatoxin compounds, in agricultural products for human and animal consumption. As improvements in food security continue more regulations for acceptable levels of aflatoxins have arisen globally; the most stringent in Europe. These regulations are important for developing countries as aflatoxin occurrence is high significantly effecting international trade and the economy. In developed countries analytical approaches have become highly sophisticated, capable of attaining results with high precision and accuracy, suitable for regulatory laboratories. Regrettably, many countries that are affected by aflatoxin contamination do not have resources for high tech HPLC and MS instrumentation and require more affordable, yet robust equally accurate alternatives that may be used by producers, processors and traders in emerging economies. It is especially important that those companies wishing to exploit the opportunities offered by lucrative but highly regulated markets in the developed world, have access to analytical methods that will ensure that their exports meet their customers quality and safety requirements.

This work evaluates the ToxiMet system as an alternative approach to UPLC–MS/MS for the detection and determination of aflatoxins relative to current European regulatory standards. Four commodities: rice grain, maize cracked and flour, peanut paste and dried distillers grains were analysed for natural aflatoxin contamination. For B1 and total aflatoxins determination the qualitative correlation, above or below the regulatory limit, was good for all commodities with the exception of the dried distillers grain samples for B1 for which no calibration existed. For B1 the quantitative R² correlations were 0.92, 0.92, 0.88 (<250 μg/kg) and 0.7 for rice, maize, peanuts and dried distillers grain samples respectively whereas for total aflatoxins the quantitative correlation was 0.92, 0.94, 0.88 and 0.91. The ToxiMet system could be used as an alternative for aflatoxin analysis for current legislation but some consideration should be given to aflatoxin M1 regulatory levels for these commodities considering the high levels detected in this study especially for maize and peanuts

German consumers' attitudes and preferences with regard to organic food and food from different origins

In dieser Studie geht es darum, ein umfassendes Bild bezüglich der Konsumenteneinstellungen, Präferenzen und Zahlungsbereitschaften für ökologisch produzierte Lebensmittel und Lebensmittel verschiedener Herkünfte in Deutschland zu erhalten. Obwohl die regionale Herkunft von Lebensmitteln nicht offiziell und einheitlich geregelt ist und keiner Zertifizierung unterliegt wie die ökologische Produktion von Lebensmitteln, zeigen nationale und internationale Studien gleichermaßen, dass Konsumenten bereit sind, mehr für regionale als für ökologisch produzierte Lebensmittel zu bezahlen. Zur Erreichung des Forschungsziels wurde ein Kaufexperiment in Kombination mit einer Konsumentenbefragung, bestehend aus Fragen zum generellen Einkaufsverhalten, zu Einstellungen gegenüber regionalen und ökologisch produzierten Lebensmitteln und zu soziodemographischen Informationen durchgeführt. Im Kaufexperiment wurden die Attribute Produktherkunft, Produktionsweise und Preis anhand vier verschiedener Produkte (Äpfel, Butter, Mehl und Steaks) untersucht. Die Befragung, einschließlich des Experimentes, war durch Interviewer eines Marktforschungsinstituts initiiert, computergestützt und von den Konsumenten selbständig zu erledigen. Das Ziel war es 80 Konsumenten in jedem der acht Befragungsorte in verschiedenen Regionen Deutschlands zu befragen. Zur Auswertung des Experiments wurden RPL-Modell geschätzt, die die Konsumentenpräferenzen für die zu untersuchenden Produktattribute aufzeigen und die Berechnung von Zahlungsbereitschaften ermöglichen. Für die Gesamtheit der Konsumenten war die regionale Herkunft von Lebensmitteln wichtiger als die ökologische Produktion. Außerdem wurden Produktalternativen, die aus der Region stammen, immer stärker präferiert als Produkte aus Deutschland, aus einem Nachbarland und einem außereuropäischen Land. Weiterhin zeigte die Studie, dass Konsumentenpräferenzen produkt- und regionsspezifisch sind. Folglich wird empfohlen, in zukünftigen Studien unterschiedlich Produkte bzw. Produktgruppen und Konsumenten verschiedener Regionen einzubeziehen. Die zunehmenden Präferenzen und Zahlungsbereitschaften der Konsumenten für regionale Lebensmittel deuteten sowohl in dieser Dissertation als auch in vielen anderen nationalen und internationalen Studien darauf hin, dass es ein großes Potential für einen regionalen Lebensmittelmarkt gibt. Aus diesem Grund wird Produzenten und Vermarktern von ökologischen sowie konventionellen Produkten empfohlen, verstärkt in die Entwicklung von regionalen Versorgungsketten zu investieren.

Learning to Interpret and Generate Instructional Recipes

Thesis (Ph.D.)--University of Washington, 2016-08

Isotopic and magnetic provenance characterization of distal IRD in the Galicia Interior Basin (NW Iberia)

The sediments of the Galicia Interior Basin in NW Iberia Margin are of particular palaeoclimatic interest as they are located at the boundary where the climatic oscillations of the glacial interval were interrupted by extreme events such as Heinrich events. These events are well characterized in Northern North Atlantic areas, but little is known about their occurrence beyond the Ruddiman belt. This study presents a combined environmagnetic and geochemical approach to the provenance and characterization of distal ice-rafted detritus (IRD) that occurred during the last glacial period in core CI12PC3 from the Galicia Interior Basin. The last six Heinrich Layers were identified by their magneto-mineralogical and geochemical properties. Their Sr and Nd isotopic signatures indicated that the Laurentide Ice Sheet was the major source for HL1, HL2, HL4 and HL5. However, the European ice sheets also influenced the initial development stages of HL1, HL2, HL4. HL3, HL6 and partially HL1, HL2 and HL4 were influenced by more juvenile provinces, such as Iceland/Faroes sheets and/or by the Fram Strait/East Greenland nearby areas. Separate provenance analyses of the coarse and fine fractions in the studied Heinrich Layers also indicated that IRDs and glacial flour sources might not always be the same. Our results shed unequivocal evidence that Canadian-sourced distal IRD are preceded by European-sourced IRD, at least from the H4. In our view, LIS and EIS instabilities registered in the Iberian Margin respond to the same climate forcing at different velocities.

Magnetic properties contribution to the identification and provenance of marine sediments: distal IRD in the Galicia Interior Basin (NW Spain)

This paper discusses the advantages of using a combined environmagnetic and geochemical approach to the provenance and characterization of distal IRDs occurring during the Last Glacial Period in core CI12PC3 from the Galicia Interior Basin (GIB). Six Heinrich layers (HL1-6) have been identified in the area in base to the detection of distinct populations of exotic magnetic mineral assemblages alien to the local/regional sedimentation environment. Their extension has been determined by Ca/Sr and Si/Sr ratios and their provenance by 143Nd/144Nd and 87Sr/86Sr isotopic ratios and FORCs. The sedimentary expression of HL is characterized by the presence of distal Ice Rafted Detritus (IRD). Distal IRD magnetic signatures in the GIB consist of (i) an increase of one order of magnitude in the peak amplitude of magnetic susceptibility from background values, (ii) a general coarsening of the magnetic grain size in a mineral assemblage dominated by titano-magnetites, (iii) FORC distributions pushing towards the coarse MD or PSD component, and (iv) thermomagnetic curves depicting the occurrence of several magnetite phases. These four features are very different from the fine-grained biogenic magnetic assemblages characterized by the combination of lower MS and higher coercivity values that dominate the predominant mixtures of the non-interacting SSD and PSD components in the non-IRD influenced background sedimentation. Our results show that the last 70.000 yr of sedimentation in the GIB were controlled by the relative contribution of local detrital material derived from the Iberian Variscan Chain and IRD alien material from the iceberg melting during the Heinrich Events. They also show two main IRD provenance fields: Europe and Canada. And that the later is more important for for HL1, HL2, HL4 and HL5. FORCs analysis complemented the isotopic information and provided a very unique information, indicating that glacial flour may not always have the same provenance as IRD and that ice-melted derived suspended sediment has its own dynamics and may reach further and/or persists longer than IRD.

Composites and foams based on polylactic acid (PLA)

Cette étude est destinée à la production et à la caractérisation des composites d’acide polylactique (PLA) et des fibres naturelles (lin, poudre de bois). Le moussage du PLA et ses composites ont également été étudiés afin d’évaluer les effets des conditions de moulage par injection et du renfort sur les propriétés finales de ces matériaux. Dans la première partie, les composites constitués de PLA et des fibres de lin ont été produits par extrusion suivit par un moulage en injection. L’effet de la variation du taux de charge (15, 25 et 40% en poids) sur les caractéristiques morphologique, mécanique, thermique et rhéologique des composites a été évalué. Dans la deuxième étape, la poudre de bois (WF) a été choisie pour renforcer le PLA. La préparation des composites de PLA et WF a été effectuée comme dans la première partie et une série complète de caractérisations morphologique, mécanique, thermique et l’analyse mécanique dynamique ont été effectués afin d’obtenir une évaluation complète de l’effet du taux de charge (15, 25 et 40% en poids) sur les propriétés du PLA. Finalement, la troisième partie de cette étude porte sur les composites de PLA et de renfort naturel afin de produire des composites moussés. Ces mousses ont été réalisées à l’aide d’un agent moussant exothermique (azodicarbonamide) via le moulage par injection, suite à un mélange du PLA et de fibres naturelles. Dans ce cas, la charge d’injection (quantité de matière injectée dans le moule: 31, 33, 36, 38 et 43% de la capacité de la presse à injection) et la concentration en poudre de bois (15, 25 et 40% en poids) ont été variées. La caractérisation des propriétés mécanique et thermique a été effectuée et les résultats ont démontré que les renforts naturels étudiés (lin et poudre de bois) permettaient d’améliorer les propriétés mécaniques des composites, notamment le module de flexion et la résistance au choc du polymère (PLA). En outre, la formation de la mousse était également efficace pour le PLA vierge et ses composites car les masses volumiques ont été significativement réduites.

Determinación de la flora micológica del maíz seco y su harina en la parroquía San Juan-cantón Gualaceo

El presente trabajo de tesis tuvo como finalidad evaluar la flora micológica del maíz seco y su harina producidos en la parroquia San Juan - Cantón Gualaceo con el fin de aportar con información sobre la calidad de estos alimentos. Además se evaluaron los siguientes factores para el desarrollo de la flora micológica: temperatura, actividad acuosa, almacenamiento; así como también el crecimiento en distintos medios de cultivos y el uso de la desinfección del grano como parte de la técnica de siembra. La detección, recuento y aislamiento de hongos se realizó de acuerdo a la técnica de recuento en placa por siembra en profundidad para la harina y en el caso del grano por la técnica de siembra directa, con y sin desinfección de la superficie del grano utilizándose el agar MEA (Agar Extracto de Malta), PDA (Agar Papa Dextrosa) y DRBC (Agar Rosa de Bengala Diclorán) y sometiendo a dos tratamientos térmicos (18°C vs 25°C). Se encontró que la micoflora presente en las muestras analizadas corresponde a los géneros Penicillium, Fusarium, Rhizopus, Aspergillus y levaduras, siendo el género predominante Penicillium tanto en el grano como en la harina. La temperatura óptima para el crecimiento fue 25°C; y a su vez el crecimiento fue mejor sin desinfectar las superficies del grano. El crecimiento micológico varió dependiendo del medio, siendo PDA el más óptimo para Penicillium y Rhizopus, mientras que para Fusarium y Aspergillus no hubo diferencia. Igualmente se encontró que la actividad acuosa influyó en forma proporcional al crecimiento micológico y que el almacenamiento controlado influyó positivamente en su disminución.

Crescimento micelial de Ganoderma lucidum em diferentes substratos e relação com concentração de β-Glucanas, atividade antioxidante e efeitos sobre o desempenho de coelhos

Ganoderma lucidum is a medicinal mushroom traditionally consumed in Asian countries that presents several beneficial effects already verified. Despite all studies about their bioactive compounds, the best cultivation media enrichment aiming to increase the production of these compounds is still uncertain. Besides, few studies are related to the performance of production animals. In order to test different cultivation media for G. lucidum mycelia, agricultural residues (solid state fermentation) and different sugars and aminoacids (in culture media with agar), were tested to evaluate G. lucidum mycelium growth. Supply of flour with G. lucidum mycelia obtained by solid state fermentation (wheat grain) for rabbits was also evaluated. Mycelium of G. lucidum developed very well in all agricultural residues, soybean hulls was the residue that presented higher growth rate and higher concentration of β-glucans. In the cultivation media experiment, G. lucidum also developed well, media that contained cellobiose and tyrosine, despite presenting lower growth rates and total growth within 10 days, produced mycelia with higher concentration of β-glucans and trolox equivalent antioxidant capacity (TEAC), respectively. Rabbits did not show any sign of intolerance to feed with different concentrations of flour with G. lucidum mycelium. All performance parameters and dressing percentages were adequate to the age at which they were slaughtered. Histological evaluation of organs presented alterations in renal cells (tubular and glomerulus), indicating a possible renal lesion according to the increase of flour with mycelium in feed. Histomorphometric evaluation showed increased vilous height in ileum and decreased vilous width of jejunus at 0.5% concentration, and decrease in crypt diameter according to the increase of concentration of flour with mycelium in feed. These results indicate the possibility of more studies regarding the aspects about cellobiose and tyrosine utilization for the production of bioactive compounds, and about toxicity of this mushroom mycelia, assuring the safety in supplying this product for animails.

Araça amarelo: atividade antioxidante, composição nutricional e aplicação em barra de cereais

Brazil has a great diversity of native fruits, which are not always widely consumed, being sold only in certain regions, due to their difficulty of post-harvest conservation. One such fruit is yellow guava, interesting source of nutrients. To promote the consumption and use of this fruit to the consumer public in different regions of the country, this study evaluated the incorporation of yellow Ya-cy araçá in formulating a cereal bar. Therefore, fruits were evaluated for their chemical, physical and chemical characteristics and bioactive compounds in different stages of maturation yellow guava (green, mature and dried forms). The behavior of guava yellow front of to UV-C radiation was also evaluated. After these reviews, there was obtained yellow ripe guava flour after previous tests, was added to the base formulation cereal bar. For the experimental planning and development of the formulations was used factorial design 22 with a central point. The developed formulations were subjected to sensory evaluation using for treatment of multivariate data analysis (Principal Component Analysis- ACP). The preferred formulation in sensory evaluation was evaluated in their physical characteristics (texture), physical-chemical (moisture, ash, lipids, proteins, carbohydrates, dietary fiber and calorie), mineral content and fatty acid profile. The results indicated that the added yellow guava cereal bar developed in this study is one way to application and use of guava, increasing the consumption of fruit to different regions of the country, and can be considered a functional product, not only to contain the fruit in its composition, but also to present many beneficial nutrients that contribute to the health of consumers.

Use of sulfuryl fluoride in the management of strongly phosphine-resistant insect pest populations in bulk grain storages in Australia

Sulfuryl fluoride (SF), an effective structural fumigant, is registered recently as Profume™ for controlling insect pests of stored grains and processed commodities. Information on its effectiveness in disinfestation of bulk grain, however, is limited. The ongoing problem with the strong level of resistance to phosphine has been addressed recently through deployment of SF as a ‘resistance breaker’ in bulk storages in Australia. This paper discusses important results on the efficacy of SF against key phosphine- resistant insect pests, lesser grain borer, Rhyzopertha dominca, red flour beetle, Tribolium castaneum, rice weevil, Sitophilus oryzae and the rusty grain beetle, Cryptolestes ferrugineus. We have established CT (g-hm3) profiles for SF against these insect pests at two temperature regimes 25 and 30°C, that showed that both temperature and exposure period (t) has significant influence on the effectiveness of SF than the concentration. Over a seven days fumigation period, CTs of 800 and 400 g-hm3 achieved complete control of all the target pests, including the most strongly phosphine - resistant species, C. ferrugineus at 25 and 30°C, respectively. Results from four industry scale field trials involving currently registered rate of SF (1500 g-hm3) over 2–14 d exposure period, confirmed its effectiveness in achieving complete control of the target pest species. The assessment of postfumigation grain samples across all the test storages indicated that the reinfestation occurs after three months. Monitoring resistance to phosphine in C. ferrugineus over a six year period (2009–2015), showed a significant reduction in resistant populations after the introduction of SF into the fumigation strategy at problematic storage sites. Overall our research concludes that SF is a good candidate to be used as a ‘resistance breaker’ where phosphine resistance is prevalent.

Desempenho de sementes de soja revestidas com biopolímeros

The use of biopolymers that help to fix pesticides efficiently and degrade easily without harming the environment, and still improve the physiological performance of field soybean seed may bring contributions to the soybean yield. This study aimed to evaluate the effect of cassava starch polymers (AM), sodium alginate (ALG) and polyvinyl alcohol (PVOH), in the concentrations 2, 4 and 6 g / 100 ml of solution, in the physiological attributes of seeds soy, seed speed soaking and performance of soybean seeds after three months of storage. The soybean variety used was the NK 7059 RR. The experimental design used for the three studies was a factorial with 48 experimental units: 3 polymers (AM, ALG and PVOH), 4 different concentrations (0%, 2%, 4% and 6%), with four replications, in a completely randomized design. It was observed the level of significance of the factors and their interactions, applying the test F. The polymers were evaluated by the Tukey test at 5% probability, and the concentrations were evaluated by polynomial regression. The witness obtained better results for most variables studied. Among the polymers, the best coating was observed PVOH because it was the less viscous polymer and visually not served as a substrate for microorganisms. However, also, satisfactory results were obtained for the AM and ALG polymers at a concentration of 2%. There was not interference of the polymers studied with regard to reduction of imbibition rate of soybean seeds. The hydrophilicity of polymers, mainly the AM and ALG accelerated soaking seeds harming germination at concentrations 4% and 6%. In general, the higher the concentration of polymers tended to worse results.

Assessments of body composition and bone parameters of lactating rats treated with diet containing flaxseed meal (Linum usitatissinum) during post-weaning period

Introduction: There are few studies on body composition and the effects of diet on weight postpartum women. The aim was to evaluate the body composition and bone parameters in lactating rats treated with diet containing flaxseed flour during postweaning period. Methods: After weaning, the lactating rat were divided in control (n = 6) and experimental (F, n = 6) group, treated with 25% flaxseed flour diet. After 30 days, body composition by dual-energy X-ray absorptiometry, serum analysis, organs and intra-abdominal fat mass, femur and lumbar vertebra parameters were determined. Results: The groups showed similar food intake, body mass and bone parameters. While F group showed the following: lower body (-5%), gonadal (-17%), mesenteric (-23%) and intra-abdominal (-6%) fat mass. Increase of HDL-cholesterol (+10%) and lower glucose (-15%), triglycerides (P < 0.05, -37%) and cholesterol (P < 0.05, -21%). Conclusions: The findings highlight the effects of flaxseed for control of adiposity and to maintain a healthy biochemical profile during the postnatal period.