Serie Vídeos tutoriales para fonética (volumen 2). Video 5. Recabación a partir de tareas entre pares

Esta es una colección de 6 vídeos tutoriales que pueden ser empleados como material educativo en los cursos de fonética en el ámbito universitario. Tratan principalmente del cómo se puede obtener información desde las palabras aisladas, como se observa en las técnicas de los vídeos 1-2, pasando por datos obtenidos con participación del investigador, característica aún presente en los vídeos 3-4, hasta enunciados íntegros sin necesidad del investigador presente, tal como se ilustra en los vídeos 5-6. Se trata de establecer una reflexión entre la necesidad de identificar el grado de espontaneidad a la hora de brindar información por parte del hablante y la posibilidad (o la necesidad) de cuantificar los datos que se obtienen.

High optical-optical efficiency of 52.5% obtained in high power Nd : YAG ceramic laser

Using a quite uniformly side-around arranged compact pumping system, a high power Nd:YAG ceramic quasi-CW laser has been demonstrated with high optical-to-optical conversion efficiency over 50% for the first time. With 450 W quasi-CW stacked laser diode bars pumping at 808 run. 236 W Output at 1064 run was obtained and no saturation phenomena were observed.

5.5W CWYb3+ : Y2O3 ceramic laser pumped with 970 nm laser diode

CW laser output has been demonstrated for polycrystalline transparent 10 at.% Yb3+-doped Y2O3 ceramics. End-pumped with 970 nm laser diode, a maximum output power of 5.5 W has been obtained with absorbed pump power of 31.1 W. The slope efficiency is 25% while the threshold pump power is 5.6 W. Saturation is not observed in our experiments, indicating higher laser output can be expected with higher pump power. (C) 2004 Elsevier B.V. All rights reserved.

Efficient excitations of radially and azimuthally polarized Nd 3+:YAG ceramic microchip laser by use of subwavelength multilayer concentric gratings composed of Nb2O5/SiO2

Cylindrical vector beams were produced from laser diode end-pumped Nd:YAG ceramic microchip laser by use of two types of subwavelength multilayer gratings as the axisymmetric-polarization output couplers respectively. The grating mirrors are composed of high- and low-refractive-index (Nb2O5/SiO2) layers alternately while each layer is shaped into triangle and concentric corrugations. For radially polarized laser output, the beam power reached 610mW with a polarization extinction ratio ( PER) of 61: 1 and a slope efficiency of 68.2%; for azimuthally polarized laser output, the beam power reached 626mW with a PER of 58: 1 and a slope efficiency of 47.6%. In both cases, the laser beams had near-diffraction limited quality. Small differences of beam power, PER and slope efficiency between radially and azimuthally polarized laser outputs were not critical, and could be minimized by further optimized adjustment to laser cavity and the reflectances of respective grating mirrors. The results manifested, by use of the photonic crystal gratings mirrors and end-pumped microchip laser configuration, CVBs can be generated efficiently with high modal symmetry and polarization purity. (C) 2008 Optical Society of America.

Dual-wavelength competitive output in Nd:Y3Sc1.5Al3.5O12 ceramic disk laser

In this paper, we demonstrated a dual-wavelength competitive output in Nd:Y3SC1.5Al3.5O12 ceramic disk laser. Different dual-wavelength output behaviors for Nd:YSAG and Nd:YAG ceramic disk laser were investigated and discussed. By applying the energy transfer model, we suggested the reasonable explanation for this new phenomenon as the disordered replacing of Al3+ ions by Sc3+ ions. The main advantage of the dual-wavelength ceramic laser is the possibility to serve as the seed source to generate Terahertz radiation. (C) 2008 Elsevier B.V. All rights reserved.

Generation of 1.5-12 ns width-tunable 532 nm pulses by adopting laser-induced plasma shutter technique

The pulse-shaping technique has found widespread applications in nonlinear optics and material processing. Experimental research on laser-induced plasma shutter to control the 532 nm pulse width is conducted. The impacts of the total pulse output energy on pulse compression are investigated, and a useful conclusion can be drawn that there exists an optimal value of pulse energy at which the shortest output pulse of 3.23 ns can be obtained without a device for delay-time. Once the device for delay-time is employed to change the optical differences between two laser paths, the pulse width can be further shortened to 1.51 ns. In short, the 1.5-12 ns width-tunable 532 nm laser pulses have been obtained by adopting the laser-induced plasma shutter technique. (C) 2007 Elsevier GmbH. All rights reserved.

Reducción del riesgo de colisión durante el mecanizado en 5 ejes de piezas de turbomaquinaria mediante simulación en Siemens NX9.

[ES]Este proyecto se concibe como respuesta a la creciente demanda de piezas de turbomaquinaria y a la problemática que entraña su fabricación. En los procesos de mecanizado de tales piezas de geometrías complejas, las colisiones entre herramienta-máquina-utillaje son un problema real que puede ocasionar serias pérdidas económicas. Se implementará una metodología de simulación con Siemens NX9 previa a la fabricación para evitar tales colisiones.

Experimental study on a nonlinear photonics process of Er(0.5)Yb(3): FOV oxyfluoride nanophase vitroceramics

We study the nonlinear photonics of rare-earth-doped oxyfluoride nanophase vitroceramics (FOV), oxyfluoride glass (FOG), and ZBLAN fluoride glass. We found that an interesting fluorescence intensity inversion phenomenon between red and green fluorescence occurs from Er(0.5)Yb(3):FOV The dynamic range Sigma of the intensity inversion between red and green fluorescence of Er(0.5)Yb(3):FOV is about 5.753 x 10(2), which is 100 to 1000 times larger than those of other materials. One of the applications of this phenomenon is double-wavelength fluorescence falsification-preventing technology, which is proved to possess the novel antifriction loss and antiscribble properties. (c) 2007 Optical Society of America.

TeO2-Nb2O5-YF3玻璃系统的形成区及性质研究

制备了一种新型的氧卤碲酸盐玻璃：TeO2-Nb2O5-YF3,给出并研究了TeO2-Nb2O5-YF3三元系统的玻璃形成范围。测试了玻璃的密度、折射率、差热(DTA)、拉曼光谱、红外透射光谱以及紫外吸收光谱,通过光谱分析研究了组分含量的变化对玻璃结构及红外透射特性的影响。实验结果表明,TeO2-Nb2O5-YF3玻璃系统具有优良的成玻璃性能和热稳定性等特性,而且在2.8～3.3 μm区域内无明显的[OH]基团吸收,在中红外3～5 μm区域具有优良透射性能,因此在中红外透射方面具有潜在应用价值。

Efectos de la actividad física en la evolución de las relaciones interpersonales en alumnado de 5º y 6º de Primaria y 1º y 2º de Secundaria en campamento escolar de Vela

Hoy en día toda o casi toda la población de nuestra sociedad conocemos o bien de primera mano o de segunda mano los campamentos. Seguramente un alto porcentaje de la población haya estado en alguno, y el que no, habrá oído hablar de ellos. En los campamentos, se crea un caldo de cultivo idóneo para la socialización de los niños, ¿pero se les da las mismas oportunidades a todos? Un niño o niña con poca capacidad de socialización no va a tener las mismas oportunidades que los demás, por lo que es necesario buscar una metodología que ayude a la socialización de todos. Así pues, mediante este trabajo se plantea una metodología basada en la actividad física, y dentro de ella en los juegos cooperativos. Se analizará si con la utilización de juegos cooperativos se da un cambio en las relaciones interpersonales de los niños, y de ser así, si el cambio es positivo, es decir, si se trabajan las relaciones desde el aspecto de los valores humanos. Por consiguiente, veremos que los juegos cooperativos sirven y en gran medida para influenciar en ese cambio en las relaciones interpersonales de los niños en un campamento escolar de vela, siendo ese cambio muy positivo y dándose en la mayoría de los niños.

铒玻璃在1．54μm实现1 Hz下3 J和5 Hz下0．6 J的激光输出

近年来,随着激光告警、激光指示、风速测量、激光雷达尤其是激光美容等方面的需求逐渐增加,要求掺铒激光玻璃能够实现比以往更高重复频率以及更大能量的激光输出,其中对脉冲能量的要求达1～10 J。

Exposição ao material particulado 2,5 m coletado em vias de alto tráfego da cidade do Rio de Janeiro: avaliação mutagênica, genotóxica e determinação de risco à saúde induzido por hidrocarbonetos policíclicos aromáticos

A mutagenicidade do material particulado é atribuída primeiramente aos hidrocarbonetos policíclicos aromáticos (HPA). Investigamos a atividade mutagênica do material particulado (MP2,5) em amostras coletadas em três pontos da cidade do Rio de Janeiro. As coletas foram realizadas com auxílio de um amostrador de grande volume na Avenida Brasil, no campus da Universidade do Estado do Rio de Janeiro e no Túnel Rebouças em filtros de fibra de vidro. Metade de cada filtro foi submetido à extração por sonicação com o solvente diclorometano. Seis HPA foram identificados e quantificados por cromatografia gasosa com espectrometria de massa (GC/MS). Após a análise química as concentrações dos HPA obtidos foram correlacionados ao fatores físicos, além de ser realizado avaliação de risco para cada HPA estudado. Linhagens de Salmonella typhimurium (TA98 e derivadas TA98/1.8-DNP6, YG1021 e YG1024) foram utilizadas no ensaio de mutagenicidade e tratadas (10-50 g/placa) com extrato orgânico na presença e na ausência de metabolização exógena. Células de raiz de cebola foram tratadas com extratos orgânicos nas concentrações (5-25g/mL). A alta umidade encontrada no Túnel Rebouças pode ter influenciado na deposição de cinco dos seis HPA estudados em material particulado. Além disso, em diferentes condições de tráfego, motoristas de ônibus que cruzam a Avenida Brasil e o Rebouças túnel estão expostos ao risco induzidos por HPA na ordem de 10-6. Mutagenicidade foi detectada tanto na presença quanto na ausência de metabolização, para as linhagens YG1021 e YG1024 nos três pontos, sugerindo a presença de nitro e amino derivados de HPA. As amostras do Túnel Rebouças apresentaram os maiores valores para rev/g e rev/m3. Estes resultados podem estar relacionados ao longo trajeto e a restrita ventilação. Efeito citotóxico foi detectado pelo ensaio Allium cepa nos três pontos de monitoramento. Além disso os extratos orgânicos provenientes das coletas da Avenida Brasil, UERJ e do Túnel Rebouças induziram efeito clastogênico em células de raiz de Allium cepa

Spectroscopic properties of Er3+ doped TeO2-BaO (Li2O, Na2O)-La2O3 glasses for 1.5-mu m optical amplifiers

This paper reports on the optical spectroscopic properties and thermal stability of Er3+-doped TeO2-BaO (Li2O,NaO)-La2O3 glasses for developing 1.5-mu m fiber amplifiers. Upon excitation at 977 nm laser diode, an intense 1.53-mu m infrared fluorescence has been observed with a broad full width at half maximum (FWHM) of about 60 nm for the Er3+-doped TeO2-BaO (Li2O, Na2O)-La2O3 glass with 10 mol% of BaO. The calculated fluorescence lifetime and the emission cross-sections of the 1.53-mu m transition are 2.91 ms and similar to 9.97 x 10(-21) cm(2), respectively. It is noted that the gain bandwidth, a, x FWHM, of the TeO2-BaO-La2O3Er2O3 glass is about 600, which is significantly higher than that in silicate and phosphate glasses. Meanwhile, it is interesting to note that the TeO2-BaO-La2O3-Er2O3 glass has shown a high glass thermal stability and good infrared transmittance. As a result, TeO2-BaO (Li2O, Na2O)-La2O3 glass with 10 mol% of BaO has been considered to be more useful as a host for broadband optical fiber amplifier. (c) 2005 Elsevier B.V. All rights reserved.