Body composition variables as predictors of NAFLD by ultrasound in obese children and adolescents

Background: Nonalcoholic fatty liver disease (NAFLD) is a disorder associated with excessive fat accumulation, mainly in the intra-abdominal region. A simple technique to estimate abdominal fat in this region could be useful to assess the presence of NAFLD, in obese subjects who are more vulnerable to this disease. The aim of this cross-sectional study was to verify the reliability of waist circumference and body composition variables to identify the occurrence of NAFLD in obese children and adolescents.Methods: Sample was composed of 145 subjects, aged 11 to 17 years. Assessments of waist circumference (WC), trunk fat mass (TFM) and fat mass (FM) by dual-energy X-ray absorptiometry (DXA) and ultrasound for diagnosis of NAFLD and intra-abdominal adipose tissue (IAAT) were used. Correlation between variables was made by Spearman's coefficients; ROC curve parameters (sensitivity, specificity, area under curve) were used to assess the reliability of body composition variables to assess the presence of NAFLD. Statistical significance was set at 5%.Results: Significant correlations were observed between NAFLD and WC (p = 0.001), TFM (p = 0.002) and IAAT (p = 0.001). The higher values of area under the ROC curve were for WC (AUC = 0.720), TFM (AUC = 0.661) and IAAT (AUC = 0.741).Conclusions: Our findings indicated that TFM, IAAT and WC present high potential to identify NAFLD in obese children and adolescents.

Sol-gel thin-film based mesoporous silica and carbon nanotubes for the determination of dopamine, uric acid and paracetamol in urine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Methodological Difficulties of Conducting Agroecological Studies from a Statistical Perspective

Statistical methods for analyzing agroecological data might not be able to help agroecologists to solve all of the current problems concerning crop and animal husbandry, but such methods could well help them assess, tackle, and resolve several agroecological issues in a more reliable and accurate manner. Therefore, our goal in this article is to discuss the importance of statistical tools for alternative agronomic approaches, because alternative approaches, such as organic farming, should not only be promoted by encouraging farmers to deploy agroecological techniques, but also by providing agroecologists with robust analyses based on rigorous statistical procedures.

Statistical and dynamical properties of a dissipative kicked rotator

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alignment of the CMS tracker with LHC and cosmic ray data

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Molecular Phylogeny and Biogeographic History of the Armored Neotropical Catfish Subfamilies Hypoptopomatinae, Neoplecostominae and Otothyrinae (Siluriformes: Loricariidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The performance of conventional and fluorescence-based methods for occlusal caries detection: an in vivo study with histological validation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Spatial patterns of species richness and phylogenetic diversity of woody plants in the neotropical savannas of Brazil

Savanna woody plant communities are widespread in Brazil, where this vegetation type can be divided into core-central and marginal areas within its range of distribution. The study of diversity patterns of plant communities can provide insights into the distribution, biogeography, and diversity of plant species in widespread biomes. The objectives of this study were to measure standard and phylogenetic indices of diversity in woody plant communities of the savanna vegetation of Brazil (Cerrado) throughout its extensive range. Based on a metaanalysis, the diversity indexes were compared using traditional statistical methods, a phylogenetic approach, and by mapping. Similar patterns were found for phylogenetic and traditional indexes of diversity in core and marginal areas, suggesting that both lower and higher diversity sites can occur within the Cerrado geographical area. The only difference was found in low diversity, disjunct savanna sites within the Amazon basin, which are isolated by the Amazon River from the more continuous central-southern Cerrado area.

Joint economic design of X̄ and R control charts for processes subject to two independent assignable causes

A model for the joint economic design of X̄ and R control charts is developed. This model assumes that the process is subject to two assignable causes. One assignable cause shifts the process mean; the other shifts the process variance. The occurrence of the assignable cause of one kind does not block the occurrence of the assignable cause of another kind. Consequently, a second process parameter can go out-of-control after the first process parameter has gone out-of-control. A numerical study of the cost surface to the model considered has revealed that it is convex, at least in the interest region.

Multivariate morphometrics and allometry and allometry in a polymorphic ant

In this paper we describe how morphological castes can be distinguished using multivariate statistical methods combined with jackknife estimators of the allometric coefficients. Data from the polymorphic ant, Camponotus rufipes, produced two distinct patterns of allometric variation, and thus two morphological castes. Morphometric analysis distinguished different allometric patterns within the two castes, with overall variability being greater in the major workers. Caste-specific scaling variabilities were associated with the relative importance of first principal component. The static multivariate allometric coefficients for each of 10 measured characters were different between castes, but their relative magnitudes within castes were similar. Multivariate statistical analysis of worker polymorphism in ants is a more complete descriptor of shape variation than, and provides statistical and conceptual advantages over, the standard bivariate techniques commonly used.

Stability study of fluconazole applying validated bioassay and stability-indicating LC methods

Chemical degradation of drugs may result in altered therapeutic efficacy and even toxic effects. Therefore, understanding the factors that change the stability of pharmaceuticals and identifying ways to guarantee their stability are important. In this work stability-indicating Liquid Chromatographic (LC) and bioassay methods were validated and employed in the fluconazole stability studies. The correlation of sample results from both methods was evaluated. Fluconazole raw material stability was investigated in aqueous, acid (0.1 M HCl), alkaline (0.1 M NaOH) and oxidative (3% v/v H2O2) reflux for 6 hours, by LC method. Fluconazole capsules were exposed to UVC (254 nm, 66 and 180 days), climatic chamber (40°C, 75% RH, 90 days) and oven (60°C, 60 days), these samples were analyzed by LC and bioassay methods It was found that the drug is degraded (10% decrease) with arising of a possible degradation product in an oxidative medium and UVC exposure, in all the others conditions fluconazole remained chemically stable (higher than 98%) when analyzed by LC. However when the capsules stressed samples were evaluated through bioassay very low antifungal activity was found (about 30%). Fluconazole showed to be an unstable drug and it indicates that special care must be taken during the handling, storage and quality control using appropriated methods to analyze this therapeutic agent. This work suggests monitoring the fluconazole stability by bioassay and the stability-indicating LC methods.

Comparative study over methods developed for quantification of darunavir in tablets by environmental friendly infrared and capillary electrophoretic techniques

Darunavir, a protease inhibitor used in the treatment of HIV infection, presents few methods for its determination in pharmaceuticals. Infrared (IR) spectroscopy offers the possibility of obtaining spectra relatively quickly, providing interesting information, analytically, qualitatively or quantitatively. Capillary electrophoresis (CE) performs separations of high efficiency in shorter time with reagents and samples in small quantity. These two methods are cost-benefitted when we evaluate the green level and the cost of analysis. Faster and cheaper methods without generating organic waste by IR and CE for the quantification of darunavir were developed and validated, focusing socioeconomic impact of analytical decisions. If the cost of acquisition, maintenance, production, analysis and conditioning of drugs and pharmaceuticals is high, consequently the price of this product in the market will be higher and it cannot be accessible to the patient. Treatment failure not only affects the quality of life of patients, but also contributes significantly to the economic burden of the health system. In this context there is a tool called Analysis of the Life Cycle, which comes to make us think in a multidimensional way focusing the whole, the parts and especially the interaction among the parts of a system.

Comparison of high performance liquid chromatography and three titrimetric methods for the determination of ceftazidime in pharmaceutical formulations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Environmental conservation and the Cerrado Biome: investigating knowledge and attitudes of Bauru residents

In today’s context of environmental degradation, environmental issues have increasingly become a focus of global discussion. Although many researchers emphasize the importance of knowledge and information in promoting environmental protection, research involving people’s notions about and attitudes toward the environment and establishing their connection with such knowledge is scarce. This lack of research led to the following inquiry: Is it possible to relate conservation actions and concern about a biome – in this case, the Cerrado – to the population’s level of knowledge about the environment in which they live? This research presents results from an investigation conducted in a representative population sample in Bauru, where there are fragments of a Cerrado Legal Reserve. The sampling approach used was probabilistic; it is based on random laws and can be submitted to statistical methods. The total sample (450 people) was divided into 90 people per Bauru region, 45 people female and 45 males. Each gender group was divided into three age groups: the first from 16 to 30 years, the second from 31 to 55 years and the third above 56 years. Through the questionnaire, we collected the following data from respondents: personal data such as salary, gender, age, level of education, notions/actions and intentions related to environmental conservation and general knowledge about the Cerrado. The result of the chi-square analysis is consistent with this finding, as it is less than 0.05, demonstrating a significant association between these two variables.

Moisture content and its influence on the roughness and noise emission during wood machining

Numerous factors influencing the surface quality of wood after machining, among them we highlight the machining parameters and the properties of the wood. In the analysis of the influence of these factors on machining and in determining the quality measurement systems are used to obtain surface characteristics, these systems are divided into methods of contact and non-contact. The method for mechanical contact performed with the aid of the surface roughness tester is the most valued in the measurement of roughness of wood, however, aiming at a greater agility in these measurements, there is a need to seek alternatives for evaluation of surface quality, and one of these options is to use the forms of indirect measurements of this quality, as for example, the use of noise emission during the machining process. With this, the aim was to analyze the influence of the moisture content of the wood, at different levels, on surface quality of the species Pinus elliottii, determined by the method of mechanical probing move and relate this roughness with the sound emission issued for each class of humidity, during machining. The planning of experiments and statistical analyses were performed with the help of Taguchi method. The specimens were conditioned in greenhouses climatizadoras automatics for obtaining three classes of humidity. Machining tests of wooden pieces were performed on a machining center specific for this type of material. The roughness values were measured by a roughness verifier and the noise emission values were measured by for a measurer sound pressure level. Statistically significant differences were observed, the significance level of 10 %, on roughness and noise emission between the three levels of moisture. It was observed that with the increase in the moisture content occurred an increase of roughness and a reduction in noise emission. Monitoring of surface quality through noise level is an interesting alternative to the method of mechanical contact.