A smart surgical robotic for cochlear implantation

In this paper a surgical robotic device for cochlear implantation surgery is described that is able to discriminate tissue interfaces and other controlling parameters ahead of a drill tip. The advantage in surgery is that tissues at interfaces can be preserved. The smart tool is able to control interaction with respect to the flexing tissue to avoid penetration control the extent of protrusion with respect to the real-time position of the tissue. To interpret drilling conditions, and conditions leading up to breakthrough at a tissue interface, the sensing scheme used enables discrimination between the variety of conditions posed in the drilling environment. The result is a robust fully autonomous system able to respond to tissue type, behaviour and deflection in real-time. The paper describes the robotic tool that has been designed to be used in the surgical environment where it has been used in the operating room.

Welke 'acteur' neemt de controllerrol als extraverte business partner?

Which 'actor' takes the management accountant role as an extravert business partner? Does a relation between the personal trait Extraversion and fulfilling a management accountant role as a business partner exist? Open Universiteit Nederland End thesis MSc Management, Accounting & Finance Support 1: Prof. dr. A.C.N. van de Ven RA Support 2: dr. P.C.M. Claes Examinator: dr. P. Kamminga Date of approval: September 3, 2014 student: P.R. van der Wal (studentnumber 839104017 email petervanderwal2003@yahoo.com The main question of this research is: Does a relation between the personal trait Extraversion and fulfilling a management accountant role as a business partner exist? This research is based on the dataset obtained by the controller survey 2013, executed in commission of the 'Open Universiteit' (Bork & van der Wal, 2014). From the literature review it is clear: among other management accountant roles we need business partners. And there is a relation between the personal trait Extraversion and fulfilling the role as business partner. At the same time a lack of necessary personal traits for this role has been noticed, among which is Extraversion. The factor- and cluster analyses reported by Bork & van der Wal (2014) resulted in the identification of two types of management accountant roles. In this extended research TYPE II is identified as a business partner because (s)he practices activity-combinations which are related to strategy, analyzing, supporting management in decision making, advisory, change-agency and representing the organization. 36% of the population of Dutch management accountants with a master degree (or similar) meet with the role of the business partner. Although the fulfillment of the role (TYPE II) is not purely business partnering. E.g. reporting and scorekeeping are still activities executed by TYPE II and it is not clear to what extent. Apart from that, role TYPE I executes change management and risk-management activities, which are (according to the definition) activities that belong to the business partner. The role as business partner is practiced but not that optimal as defined in theory. The logistic regression analyses on the survey-data show that Extraversion among three other triggers is significant for the prediction of the fulfillment of the management accountant role (Bork & van der Wal, 2014). A more extravert personal trait predicts a preference for TYPE II, which relates to the business partner. This 'in depth research' concentrated on the relation between the Big Five personal traits and the six activity-combinations (factors) instead of on the two clusters (I and II). The statistic analyses confirm the predicting influence of Extraversion on the business partner role. Although, except for one factor, no extra significance has been found in this additional research. The essential question can be confirmed positively: the management accountant role business partner exists in practice, some management accountants are more extravert then others, and there is a positive relation between extraversion and fulfilling the business partner role. Some formulated research limitations are related to the statistical weakness of some prediction outcomes and to interpretation differences that might occur. Further research can e.g. concentrate on the other personal traits and the significance for role-differentiation in education programs. The management accountant survey 2013 Management accountant roles in 2013 in the Netherlands Open Universiteit Nederland End thesis MSc Management, Accounting & Finance Support 1: Prof. dr. A.C.N. van de Ven RA Support 2: dr. P.C.M. Claes Examinator: dr. P. Kamminga Date of approval: September 3, 2014 student: P.R. van der Wal and H.J. Bork studentnumber: 839104017 and 838532340) email: petervanderwal2003@yahoo.com and hjbork@hotmail.com This paper describes the conceptual model and results of the 'management accountants survey 2013'. The survey is part of a longitudinal survey, earlier executed in 2004, 2007 and 2010 under responsibility of the 'Open Universiteit Nederland'. Secondly the dataset of this survey will be used by us to do our own analyses on the predicting value of the triggers 'personality factor: extraversion' and 'lever of control: interactive controls' on the management accounting role that comes close to a role defined as 'Business Partner'. Scientific research shows that there are different management accounting roles, and that these roles change and that preferences exist for certain roles (Verstegen B. , Loo, Mol, Slagter, & Geerkens, 2007). The main question that will be answered in this paper is which coherent combinations of activities are being executed by management accountants in 2013 in the Netherlands by master-graduates? And secondly which triggers of management accountants' activities predict to which cluster a management accountant belongs? The conceptual model of this research has been developed in 2004 (Verstegen B. , Loo, Mol, Slagter, & Geerkens, 2007). For this research the same 37 activities as in the former researches are included (appendix 1). In the trigger-set (appendix 1) some adaptations have been made for reasons of restricting the length of the survey and to pinpoint on particular research goals (e.g. personality and levers of control). The coherent combinations of activities were found by a factor-analysis and the groups of controllers by a cluster analysis. A regression analysis shows which trigger-items are most significant. The survey has been sent to 2.353 students that finished a controller-study on a Dutch University. There was a 9% (211) response with a completely filled survey. 137 of which indicated to work in a controller-function at the moment. These controllers have been included in the results. The factor-analysis results in six different coherent combinations of activities (factors). Shortly these factors are: advising top management on strategic level with result-effecting information (1), organizing internal reporting (2) organizing and representing the organization on external reporting (3), advising and managing changes by shortcomings in processes and control systems (4), maintaining and managing administrative organization- , information- and control systems (5) and organizing/executing risk management and internal audit (6). Factors 4, 5 and 6 are clustered in cluster TYPE I (125 controllers) and factors 1, 2 and 3 in cluster TYPE II (69 controllers). TYPE II can be associated with the management accountant role 'Business Partner', although the accountant keeps partly active in a scorekeeper role. The four most significant triggers for predicting being a TYPE II controller are 'Executing a risk-management task in order to meet compliance standards' (1), extraversion (2), company size in terms of fte (3) and gender (4).

Manufacturing Performance Reporting For Continuous Quality Improvement

Recently many plants have implemented the new manufacturing strategy of continuous quality improvement. The central hypothesis in this paper is that the implementation of a policy of continuous quality improvement results in a shift in the management control system. This article tests this hypothesis by examining the shop floor reporting policies of forty-two plants located in the United States. The paper documents that the extent of information concerning the current status of manufacturing, such as charts on defect rates or schedule compliance and productivity information, provided to workers on the shop floor is positively related to the implementation of continuous quality improvement programs.

CHARACTERIZATION OF RADIATION DAMAGE TO A NOVEL PHOTONIC CRYSTAL SENSOR

New methods of nuclear fuel and cladding characterization must be developed and implemented to enhance the safety and reliability of nuclear power plants. One class of such advanced methods is aimed at the characterization of fuel performance by performing minimally intrusive in-core, real time measurements on nuclear fuel on the nanometer scale. Nuclear power plants depend on instrumentation and control systems for monitoring, control and protection. Traditionally, methods for fuel characterization under irradiation are performed using a “cook and look” method. These methods are very expensive and labor-intensive since they require removal, inspection and return of irradiated samples for each measurement. Such fuel cladding inspection methods investigate oxide layer thickness, wear, dimensional changes, ovality, nuclear fuel growth and nuclear fuel defect identification. These methods are also not suitable for all commercial nuclear power applications as they are not always available to the operator when needed. Additionally, such techniques often provide limited data and may exacerbate the phenomena being investigated. This thesis investigates a novel, nanostructured sensor based on a photonic crystal design that is implemented in a nuclear reactor environment. The aim of this work is to produce an in-situ radiation-tolerant sensor capable of measuring the deformation of a nuclear material during nuclear reactor operations. The sensor was fabricated on the surface of nuclear reactor materials (specifically, steel and zirconium based alloys). Charged-particle and mixed-field irradiations were both performed on a newly-developed “pelletron” beamline at Idaho State University's Research and Innovation in Science and Engineering (RISE) complex and at the University of Maryland's 250 kW Training Reactor (MUTR). The sensors were irradiated to 6 different fluences (ranging from 1 to 100 dpa), followed by intensive characterization using focused ion beam (FIB), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) to investigate the physical deformation and microstructural changes between different fluence levels, to provide high-resolution information regarding the material performance. Computer modeling (SRIM/TRIM) was employed to simulate damage to the sensor as well as to provide significant information concerning the penetration depth of the ions into the material.

Navegação de um robô móvel baseado em um modelo de consciência artificial

This work presents a study about a the Baars-Franklin architecture, which defines a model of computational consciousness, and use it in a mobile robot navigation task. The insertion of mobile robots in dynamic environments carries a high complexity in navigation tasks, in order to deal with the constant environment changes, it is essential that the robot can adapt to this dynamism. The approach utilized in this work is to make the execution of these tasks closer to how human beings react to the same conditions by means of a model of computational consci-ousness. The LIDA architecture (Learning Intelligent Distribution Agent) is a cognitive system that seeks tomodel some of the human cognitive aspects, from low-level perceptions to decision making, as well as attention mechanism and episodic memory. In the present work, a computa-tional implementation of the LIDA architecture was evaluated by means of a case study, aiming to evaluate the capabilities of a cognitive approach to navigation of a mobile robot in dynamic and unknown environments, using experiments both with virtual environments (simulation) and a real robot in a realistic environment. This study concluded that it is possible to obtain benefits by using conscious cognitive models in mobile robot navigation tasks, presenting the positive and negative aspects of this approach.

Sistema de emulação de aerogeradores para aplicação em geração distribuída de energia elétrica

Power generation from alternative sources is at present the subject of numerous research and development in science and industry. Wind energy stands out in this scenario as one of the most prominent alternative in the generation of electricity, by its numerous advantages. In research works, computer reproduction and experimental behavior of a wind turbine are very suitable tools for the development and study of new technologies and the use of wind potential of a given region. These tools generally are desired to include simulation of mechanical and electrical parameters that directly affect the energy conversion. This work presents the energy conversion process in wind systems for power generation, in order to develop a tool for wind turbine emulation testing experimental, using LabVIEW® software. The purpose of this tool is to emulate the torque developed in an axis wind turbine. The physical setup consists of a three phase induction motor and a permanent magnet synchronous generator, which are evaluated under different wind speed conditions. This tool has the objective to be flexible to other laboratory arrangements, and can be used in other wind power generation structures in real time. A modeling of the wind power system is presented, from the turbine to the electrical generator. A simulation tool is developed using Matlab/Simulink® with the purpose to pre-validate the experiment setup. Finally, the design is implemented in a laboratory setup.

Diagnóstico automático de eventos e distúrbios em unidades geradoras e usinas utilizando lógica fuzzy

The electric power systems are getting more complex and covering larger areas day by day. This fact has been contribuiting to the development of monitoring techniques that aim to help the analysis, control and planning of power systems. Supervisory Control and Data Acquisition (SCADA) systems, Wide Area Measurement Systems and disturbance record systems. Unlike SCADA and WAMS, disturbance record systems are mainly used for offilne analysis in occurrences where a fault resulted in tripping of and apparatus such as a transimission line, transformer, generator and so on. The device responsible for record the disturbances is called Digital Fault Recorder (DFR) and records, basically, electrical quantities as voltage and currents and also, records digital information from protection system devices. Generally, in power plants, all the DFRs data are centralized in the utility data centre and it results in an excess of data that difficults the task of analysis by the specialist engineers. This dissertation shows a new methodology for automated analysis of disturbances in power plants. A fuzzy reasoning system is proposed to deal with the data from the DFRs. The objective of the system is to help the engineer resposnible for the analysis of the DFRs’s information by means of a pre-classification of data. For that, the fuzzy system is responsible for generating unit operational state diagnosis and fault classification.

Analysis of the "Sonar Hopf" Cochlea

The "Sonar Hopf" cochlea is a recently much advertised engineering design of an auditory sensor. We analyze this approach based on a recent description by its inventors Hamilton, Tapson, Rapson, Jin, and van Schaik, in which they exhibit the "Sonar Hopf" model, its analysis and the corresponding hardware in detail. We identify problems in the theoretical formulation of the model and critically examine the claimed coherence between the described model, the measurements from the implemented hardware, and biological data.

An explanation of consumer trust recovery in a food retailer

An organization trusted by consumers enjoys a number of benefits. Unfortunately, instances of trust-damaging events involving organizations happen often. Damaged consumer trust in an organization has numerous negative consequences for the organization and for consumers. Currently, there is a paucity of theory about consumer trust recovery. So, understanding why and how consumer trust recovery occurs is timely, and theoretically and practically relevant. However, the findings from this study suggest that we need to distinguish between two kinds of consumer trust recovery. The first (I call it unconscious consumer trust recovery) refers to trust recovery that occurs without the consumer being fully conscious of it. In other words, a consumer is aware of their damaged trust during the scandal, but is not aware that their trust in the organization has improved. The consumer does not think about his or her recovered trust, just as they did not think about their level of trust before the scandal. The consumer trust is habitual. The second (I call it conscious consumer trust recovery) refers to an improvement in damaged trust where the consumer is fully conscious of their trust recovery. In other words, in conscious trust recovery the consumer is aware that the scandal damaged their trust in the organization. Also, after the scandal, in contrast to unconscious trust recovery, in conscious trust recovery the consumer is also fully aware that he trusts the organization as much or more than during the scandal. My aim is to inductively develop a theory explaining each type of consumer trust recovery. To do so, I use Charmazian grounded theory methodology, because this methodology is developed for theory-building from data and is aligned with the philosophical underpinnings of this study. The empirical context for this study is the meat adulteration scandal (“the horse meat scandal”) in 2013 in the UK. I collect and analyse empirical data about both types of trust recovery in an organization from 31 consumers that experienced both types. My analysis shows that when consumers perceive the scandal as less important, they experience unconscious trust recovery. This happens because the reduced importance of the scandal leads to a shift in consumers’ attention, which in turn leads to their inattentiveness to the scandal. Consumer inattentiveness is an immediate antecedent of unconscious trust recovery. Conscious consumer trust recovery occurs because consumers see cues indicating to them that the food retailer has improved product control systems, which in turn leads to consumer perceptions of the organization’s renewed ability. Consumer perception of renewed ability is an immediate antecedent of their conscious trust recovery. My findings lead me to make three main theoretical contributions to the theory of trust recovery in general and to consumer trust recovery in particular. The first contribution lies in showing that there are two types of consumer trust recovery in an organization, not one, as previously conceptualised, and that the same consumers can experience both types. The second contribution is a theory of unconscious consumer trust recovery in an organization that involves three concepts: consumers’ perceived importance of the scandal, consumers’ shift of attention, and consumer inattentiveness. The third contribution is the finding that conscious recovery of consumer trust occurs even when existing theory of trust recovery would predict that it would not. This study can help managers aiming to repair consumer trust in an organization by identifying a set of antecedents and underlying mechanisms that can guide such trust repair.

Strategiaprosessi monikansallisessa yrityksessä

Tämän kandidaatintutkielman tavoitteena on tunnistaa strategiaprosessin eri vaiheet sekä kuvailla, miten prosessi toteutettiin tapausyritys Suominen Oyj:llä. Tavoitteina on myös analysoida, miten Suominen Oyj:n henkilöstö kokee oman suhteensa organisaatioon, sen strategiaan, tavoitteisiin ja arvoihin. Analyysin pohjalta pyritään muodostamaan kuva siitä, kuinka strategian implementoinnissa on onnistuttu. Lisäksi tarkastellaan, eroavatko nämä kokemukset eri maissa tapausyrityksessä. Tutkimuksessa käytetään sekä kvalitatiivisia että kvantitatiivisia tutkimusmenetelmiä. Suominen Oyj:n strategiaprosessista hankitaan informaatiota kahdella laadullisella puolistrukturoidulla teemahaastattelulla. Kvantitatiivisen analyysin kohteena puolestaan on tapausyrityksen yhdeksältäkymmeneltä ylimmässä asemassa työskentelevältä henkilöltä kerätty tilastollinen kyselydata, jota analysoidaan muun muassa Kruskal-Wallisin testillä sekä Spearmanin korrelaatioanalyysillä. Tutkielmassa muodostetaan kuva prosessista, jossa hyvin muotoiltu strategia sekä selkeät tavoitteet luovat pohjan strategian implementoinnille. Onnistuneen implementoinnin keinoja ovat muun muassa kehitysohjelmat, tarkka rekrytointi, tavoitteiden ja palkkioiden sitominen strategiaan, strategian kanssa yhteensopiva organisaatiokulttuuri, useamman eri hierarkiatason osallistuminen ja erilaisten kontrollijärjestelmien sekä implementointityökalujen hyödyntäminen. Havaitaan, että tapausyritys käyttää näistä keinoista useampaa. Yrityksen monikansallisuus vaikuttaa erityisesti organisaatiokulttuuriin sekä sisäiseen viestintään. Tutkielman kvantitatiivisen analyysin tulokset näyttävät, ettei maiden välillä ole tilastollisesti merkittäviä eroja siinä, miten henkilöstö kokee oman suhteensa tapausyritykseen, sen strategiaan, tavoitteisiin ja arvoihin. Kvantitatiivisen analyysin perusteella Suominen Oyj:n strategiaprosessi on onnistunut hyvin. Tutkimuksessa esitellään vielä muutamia kehitysajatuksia yritystä sekä mahdollisia jatkotutkimuksia varten.

Lógica borrosa para la estimación de estados críticos de una pila de combustible PEM

La determinación en tiempo real de los estados críticos de operación de la pila de combustible de membrana intercambio protónico (siglas en ingles, PEM) es uno de los principales retos para los sistemas de control de pilas de combustible PEM. En este trabajo, se presenta el desarrollo e implementación de un método no invasivo de bajo coste basado en técnicas de decisión borrosa que permite estimar los estados críticos de operación de la pila de combustible PEM. La estimación se realiza mediante perturbaciones al estado de operación de la pila y el análisis posterior de la evolución temporal del voltaje generado por la pila. La implementación de esta técnica de estimulación-percepción de estado de la pila de combustible para la detección de estados críticos constituye una novedad y un paso hacia el control autónomo en óptimas condiciones de la operación de las pilas de combustible PEM.

Sistema supervisor inteligente para procesos de producción de petróleo

Maximizar la producción de pozos de crudo pesado y extra pesado es el principal beneficio que se desea obtener de los sistemas de control que están corrientemente operativos en empresas de petróleo. Dada la naturaleza compleja y cambiante con el tiempo de los métodos existentes de levantamiento artificial para extracción de crudo, se dificulta el cumplimiento de las especificaciones pre establecidas para el procesamiento del crudo por parte de los lazos de control regulatorios. Tomando esto en cuenta, en éste trabajo se propone un sistema de supervisión inteligente que permite detectar cambios en las condiciones de operación del proceso productivo y realizar ajustes automáticos de sus consignas. Además, el sistema supervisor propuesto tiene la capacidad de detectar fallas en los sensores involucrados en los lazos de control, garantizando de esta manera una operación confiable del proceso. La propuesta fue probada en un pozo de petróleo real obteniéndose resultados que superaron las expectativas iniciales.

A future dynamically reconfigurable automotive software system

Embedded software systems in vehicles are of rapidly increasing commercial importance for the automotive industry. Current systems employ a static run-time environment; due to the difficulty and cost involved in the development of dynamic systems in a high-integrity embedded control context. A dynamic system, referring to the system configuration, would greatly increase the flexibility of the offered functionality and enable customised software configuration for individual vehicles, adding customer value through plug-and-play capability, and increased quality due to its inherent ability to adjust to changes in hardware and software. We envisage an automotive system containing a variety of components, from a multitude of organizations, not necessarily known at development time. The system dynamically adapts its configuration to suit the run-time system constraints. This paper presents our vision for future automotive control systems that will be regarded in an EU research project, referred to as DySCAS (Dynamically Self-Configuring Automotive Systems). We propose a self-configuring vehicular control system architecture, with capabilities that include automatic discovery and inclusion of new devices, self-optimisation to best-use the processing, storage and communication resources available, self-diagnostics and ultimately self-healing. Such an architecture has benefits extending to reduced development and maintenance costs, improved passenger safety and comfort, and flexible owner customisation. Specifically, this paper addresses the following issues: The state of the art of embedded software systems in vehicles, emphasising the current limitations arising from fixed run-time configurations; and the benefits and challenges of dynamic configuration, giving rise to opportunities for self-healing, self-optimisation, and the automatic inclusion of users’ Consumer Electronic (CE) devices. Our proposal for a dynamically reconfigurable automotive software system platform is outlined and a typical use-case is presented as an example to exemplify the benefits of the envisioned dynamic capabilities.