Histomicrobiologic aspects of the root canal system and periapical lesions in dogs' teeth after rotary instrumentation and intracanal dressing with Ca(OH)2 pastes

OBJECTIVE: The purpose of this study was to evaluate the distribution of microorganisms in the root canal system (RCS) and periapical lesions of dogs' teeth after rotary instrumentation and placement of different calcium hydroxide [Ca(OH)2]-based intracanal dressings. MATERIALS AND METHODS: Chronic periapical lesions were experimentally induced in 80 premolar roots of four dogs. Instrumentation was undertaken using the ProFile rotary system and irrigation with 5.25% sodium hypochlorite. The following Ca(OH) 2-based pastes were applied for 21 days: group 1 - Calen (n=18); group 2 - Calen+CPMC (n=20); group 3 - Ca(OH)2 p.a. + anaesthetic solution (n=16) and group 4 - Ca(OH)2 p.a.+ 2% chlorhexidine digluconate (n=18). Eight root canals without endodontic treatment constituted the control group. Histological sections were obtained and stained with Brown & Brenn staining technique to evaluate the presence of microorganisms in the main root canal, ramifications of the apical delta and secondary canals, apical cementoplasts, dentinal tubules, areas of cemental resorption and periapical lesions. The results were analyzed statistically by the Mann-Whitney U test (p<0.05). RESULTS: The control group showed the highest prevalence of microorganisms in all sites evaluated. Gram-positive cocci, bacilli and filaments were the most frequent morphotypes. Similar microbial distribution patterns in the RCS and areas of cementum resorption were observed in all groups (p>0.05). The percentage of RCS sites containing microorganisms in groups 1, 2, 3, 4 and control were: 67.6%, 62.5%, 78.2%, 62.0% and 87.6%, respectively. CONCLUSION: In conclusion, the histomicrobiological analysis showed that the rotary instrumentation and the different calcium hydroxide pastes employed did not effectively eliminate the infection from the RCS and periapical lesions. However, several bacteria seen in the histological sections were probably dead or were inactivated by the biomechanical preparation and calcium hydroxide-based intracanal dressing.

Direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirits by graphite furnace AAS using tungsten permanent modifier with co-injection of Pd/Mg(N03)2

A method was developed using the multi-element graphite furnace atomic absorption spectrometry technique for the direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirit (cachaça) samples. Also employed was the end-capped transversely heated graphite atomizer (THGA) with platforms pre-treated with W permanent modifier and co-injection of Pd/Mg(N03)2. Pyrolysis and atomization temperature curves were established in a cachaça medium (1+1; v/v) containing 0.2% (v/v) HN03 and spiked with 20 μg L-1 As and Pb and 200 μg L-1Cu. The effect of the concentration of major elements usually present in cachaça matrices (Ca, Mg, Na, and K) and ethanol on the absorbance of As, Cu, and Pb was investigated. Analytical working solutions of As, Cu, and Pb were prepared in 10% (v/v) ethanol plus 5.0 mg L-1 Ca, Mg, Na, and K. Acidified to 0.2% (v/v) HNO3, these solutions were suitable to build calibration curves by matrix matching. The proposed method was applied to the simultaneous determination of As, Cu, and Pb in commercial sugar cane spirits. The characteristic mass for the simultaneous determination was 16 pg As, 119 pg Cu, and 28 pg Pb. The pretreated tube lifetime was about 450 firings. The limit of detection (LOD) was 0.6 μg L-1As, 9.2 μg L-1 Cu, and 0.3 μg L-1Pb. The found concentrations varied from 0.81 to 4.28 μg L-1As, 0.28 to 382 mg L-1 Cu and 0.82 to 518 μg L-1 Pb. The recoveries of the spiked samples varied from 94-112% (As), 97-111% (Cu), and 95-101% (Pb). The relative standard deviation (n=12) was 6.9%, 7.4%, and 7.7% for As, Cu, and Pb, respectively, present in a sample at 0.87 μgL-1, 0.81 mgL-1, and 38.9 μgL-1concentrations.

Biomimetic sensor based on 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H- porphyrin iron (III) chloride and MWCNT for selective detection of 2,4-D

Exploitation of the electronic properties of carbon nanotubes for the development of voltammetric and amperometric sensors to monitor analytes of environmental relevance has increased in recent years. This work reports the development of a biomimetic sensor based on a carbon paste modified with 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin iron (III) chloride (a biomimetic catalyst of the P450 enzyme) and multi-wall carbon nanotubes (MWCNT), for the sensitive and selective detection of the herbicide 2,4- dichlorophenoxyacetic acid (2,4-D). The sensor was evaluated using cyclic voltammetry and amperometry, for electrochemical characterization and quantification purposes, respectively. Amperometric analyses were carried out at -100 mV vs. Ag/AgCl(KClsat), using a 0.1 mol L-1 phosphate buffer solution at pH 6.0 as the support electrolyte. Under these optimized analytical conditions, the sensor showed a linear response between 9.9 × 10-6 and 1.4 × 10-4 mol L-1, a sensitivity of 1.8 × 104 (±429) μA L mol -1, and limits of detection and quantification of 2.1 × 10 -6 and 6.8 × 10-6 mol L-1, respectively. The incorporation of functionalized MWCNT in the carbon paste resulted in a 10-fold increase in the response, compared to that of the biomimetic sensor without MWCNT. In addition, the low applied potential (-100 mV) used to obtain high sensitivity also contributed to the excellent selectivity of the proposed sensor. The viability of the application of this sensor for analysis of soil samples was confirmed by satisfactory recovery values, with a mean of 96% and RSD of 2.1% (n = 3). © 2013 Elsevier B.V.

Immunomodulatory/anti-inflammatory effects of Baccharis dracunculifolia leaves

A possible immunomodulatory/anti-inflammatory effect of Baccharis dracunculifolia (Bd) and its major compound - caffeic acid (Ca) - on cytokines production (IL-1b, IL-6 and IL-10) by murine macrophages was investigated. Cells were incubated with Bd and Ca, and the inhibitory concentrations were tested before or after macrophages challenge with LPS. Bd and Ca stimulated IL-1b and inhibited IL-6 and IL-10 production. In LPS-challenge protocols, Bd prevented LPS action either before or after LPS challenge, whereas Ca prevented LPS effects only after LPS addition. Bd modulatory action on cytokines production may be at least in part mediated by Ca, since it has been shown to inhibit the transcription factor NF-kB. Further studies are still needed to evaluate Bd efficacy in inflammatory diseases, in order to explore its antiinflammatory activity in vivo. © 2013 Taylor & Francis.

Cristalização e resolução de estrutura das proteínas Canavalia gladiata lectin (CGL) e Canavalia marítima lectin (CML) complexadas ao açúcar manose 1-6 manose

Pós-graduação em Biofísica Molecular - IBILCE

Propriedades magnéticas do modelo de Ising bidimensional em uma rede bipartida de spins 1/2 e 1: um estudo de ferrimagnetismo com vacâncias

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Efeito do cloridrato de dorzolamida a 2%, maleato de timol a 0,5% e associação de ambos na pressão intra-ocular: estudo experimental em cães

Pós-graduação em Medicina Veterinária - FMVZ

Ativação da ligação c-h no metano por espécies MOm n+ (M = Nb, Fe; m = 0, 1; n = 0, 1, 2): estrutura eletrônica, mecanismo de reação e reatividade

The need for renewal and a more efficient use of energy resources has provided an increased interest in studies of methane activation processes in the gas phase by transition metal oxides. In this respect, the present work is an effort to assess , by means of a computational standpoint, the reactivity of NbOm n+ and FeOm n+ (m = 1, 2, n = 0, 1, 2) oxides in the activation process of the methane C-H bond, which corresponds to the first rate limiting step in the process of converting methane to methanol. These oxides are chosen, primarily, because the iron oxides are the most experimentally studied, and iron ions are more abundant in biological mediums. The main motive for choosing niobium oxides is the abundance of natural reserves of this mineral in Brazil (98%), especially in Minas Gerais. Initially, a thorough investigation was conducted, using different theoretical methods, to analyze the structural and electronic properties of the investigated oxides. Based on these results, the most reliable methodology was selected to investigate the activation process of the methane C-H bond by the series of iron and niobium oxides, considering all possible reaction mechanisms known to activate the C-H bond of alkanes. It is worth noting that, up to this moment and to our knowledge, there are no papers, in literature , investigating and comparing all the mechanisms considered in this work. I n general, the main results obtained show different catalytic tendencies and behaviors throughout the series of monoxides and dioxides of iron and niobium. An important and common result found in the two studies is that the increase in the load on the metal center and the addition of oxygen atoms to the metal, clearly favor the initial thermodynamics of the reaction, i.e., favor the approach of the metal center to methane, distorting its electron cloud and, thereby, decreasing its inertia. Comparing the two sets of oxides, we conclude that the iron oxides are the most efficient in activating the methane C-H bond. Among the iron oxides investigated, FeO + showed better kinetic and thermodynamic performance in the reaction with methane, while from the niobium oxides and ions NbO 2+ and NbO2 2+, showed better catalytic efficiency in the activation of the methane C-H bond.

Eletroanálise e oxidação fotoeletrocatalítica dos disruptores endócrinos bisfenol A e nonilfenol sobre eletrodo de nanotubos de 'TI'/'TI''O IND.2' auto-organizados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação da deriva da mistura 2,4-D e glyphosate com diferentes pontas de pulverização e adjuvantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização molecular do HTLV-1/2 em doadores de sangue em Belém, Estado do Pará: primeira descrição do subtipo HTLV-2b na região Amazônica

Este trabalho objetivou a caracterização molecular do vírus linfotrópico de células T humanas infectando doadores de sangue atendidos na Fundação Centro de Hemoterapia e Hematologia do Pará. Amostras de DNA de 79 indivíduos soropositivos para o vírus linfotrópico de células T humanas foram analisadas por meio da reação em cadeia da polimerase para as regiões genômicas pX, env e 5'LTR, de polimorfismos de comprimento de fragmentos de restrição e do seqüenciamento da região 5LTR, com posterior análise filogenética, definindo o tipo e o subtipo do HTLV circulante na população estudada. Observou-se uma maior prevalência de HTLV-1 (71%) em relação ao HTLV-2 (29%). As amostras de HTLV-1 sequenciadas foram classificadas como pertencentes ao subtipo Cosmopolita, subgrupo Transcontinental, sendo as de HTLV-2 identificadas como HTLV-2c. A análise de polimorfismos de comprimento de fragmentos de restrição da região env e do sequenciamento da região 5'LTR, identificou, pela primeira vez na Amazônia Brasileira, uma amostra de HTLV-2b, enfatizando a necessidade de estudos moleculares contínuos na região para melhor entendimento da epidemiologia de transmissão do HTLV na população e permitir a vigilância epidemiológica da emergência de novos tipos e subtipos.

Expressão de HER-1 e HER-2 totais e fosforilados em queilite actínica e carcinoma epidermóide de lábio inferior

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ação sonoquímica e influência das condições de tratamento térmico na preparação de cimentos do sistema binário CaO-Al2O3

Foram preparados cimentos do sistema binário CaO-Al₂O₃ por meio de uma rota que emprega o processo sonoquímico seguido de tratamento térmico. Convencionalmente estes compostos são fabricados a partir da fusão ou da sinterização de uma mistura de calcário com bauxito ou com alumina. O maior inconveniente associado a este tipo de síntese é a necessidade de temperaturas elevadas e o grande consumo de energia. Na rota sonoquímica a cálcia, juntamente com a alumina em suspensão aquosa, são introduzidas num banho de ultra-som por tempo determinado. Em seguida, após a evaporação da água, o material resultante é tratado termicamente. Quando um sistema é submetido ao processo sonoquímico, alterações na morfologia superficial das partículas podem ser induzidas pelas ondas ultra-sônicas, incluindo a redução do tamanho dessas partículas. Como conseqüência, estes materiais tornam-se mais reativos, facilitando a síntese final dos aluminatos de cálcio durante o tratamento térmico. Foi estudada a ação das ondas ultra-sônicas e a influência das condições de tratamento térmico em duas composições molares de cálcia:alumina de 1:1 e 1:2. As temperaturas empregadas foram 1000 ºC, 1200 ºC e 1300 ºC com patamares de 1 e 6 h. O material obtido foi caracterizado por microscopia eletrônica de varredura, difração de raios X e as fases presentes foram semi-quantificadas pelo método de Rietveld. Também foram realizados ensaios de compressão diametral para avaliar a resistência mecânica dos produtos da síntese. Foram preparadas pastas constituídas de cimento, alumina e água, utilizando como cimento os aluminatos de cálcio preparados pelo processo sonoquímico e um cimento comercial, como referência.

Tratamento fotocatalítico de corante ácido usando filmes finos de vidro/Ti 'O IND. 2' e degradação fotoeletrocatalítica de corante vat sobre eletrodos de filmes finos de Ti/Ti 'O IND. 2'

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese, caracterização e avaliação da citotoxidade de complexos de 'Pd'(II) contendo o ligante 4,4´,5,5´ - tetrametil-2,2´-bis-imidazol

Pós-graduação em Química - IQ