A Geostatistical Study pf Alumina-Content in Ores of An Indian Iron-Ore Deposit

Mining and blending operations in the high grade iron ore deposit under study are performed to optimize recovery with minimal alumina content while maintaining required levels of other chemical component and a proper mix of ore types. In the present work the regionalisation of alumina in the ores has been studied independently and its effects on global and local recoverable tonnage as well as on alternatives of mining operations have been evaluated. The global tonnage recovery curves for blocks (20m x 20m x 12m) obtained by simulation closely approximated the curves obtained theoretically using a change of support under the discretised gaussian model. Variations in block size up to 80m x 20m x 12m did not affect the recovery as the horizontal dimensions of the blocks are small in relation to the range of the variogram. A comparison of the local tonnage recovery curves obtained through multiple conditional simulations made with that obtained by the method of uniform conditioning of block grades on an estimate of panel 100m x 100m x 12m panel grade reveals comparable results only in panels which have been well conditioned and possesing an ensemble simulation mean close to the ordinary kriged value for the panel. Study of simple alternative sequence of mining on the conditionally simulated deposit shows that concentration of mining operations simultaneously on a single bench enhances the fluctuation in alumina values of ore mined.

Effect of microstructure and hardness on the grinding abrasive wear resistance of a ball bearing steel

Grinding media wear appears to be non-linear with the time of grinding in a laboratory-scale ball mill. The kinetics of wear can be expressed as a power law of the type w=atb, where the numerical constant a represents wear of a particular microstructure at time t = 1 min and b is the wear exponent which is independent of the particle size prevailing inside a ball mill at any instant of time of grinding. The wear exponent appears to be an indicator of the cutting wear mechanism in dry grinding: a plot of the inverse of the normalised wear exponent (Image ) versusHs (where Hs is the worn surface hardness of the media) yields a curve similar to that of a wear resistance plot obtained in the case of two-body sliding abrasive wear. This method of evaluating the cutting wear resistance of media is demonstrated by employing 15 different microstructures of AISI-SAE 52100 steel balls in dry grinding of quartz in a laboratory-scale ball mill.

Evaluation of interfacial frictional resistance

Three distinct mechanisms — sliding, bonding and bearing — for the mobilisation of interfacial friction have been identified. In the light of these mechanisms, the effect of variation in reinforcement parameters, such as extensibility, flexibility and hardness on mobilisation of interfacial friction, and the mechanisms themselves has been examined. The influence of boundary effects of apparatus on the interfacial friction has been discussed and a method of estimating the same in a pull-out box has been proposed.

Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation

In the present investigation, unidirectional grinding marks were created on a set of steel plates. Sliding experiments were then conducted with the prepared steel plates using Al-Mg alloy pins and an inclined pin-on-plate sliding tester. The goals of the experiments were to ascertain the influence of inclination angle and grinding mark direction on friction and transfer layer formation during sliding contact. The inclination angle of the plate was held at 0.2 deg, 0.6 deg, 1 deg, 1.4 deg, 1.8 deg, 2.2 deg, and 2.6 deg in the tests. The pins were slid both perpendicular and parallel to the grinding marks direction. The experiments were conducted under both dry and lubricated conditions on each plate in an ambient environment. Results showed that the coefficient of friction and the formation of transfer layer depend on the grinding marks direction and inclination angle of the hard surfaces. For a given inclination angle, under both dry and lubricated conditions, the coefficient of friction and transfer layer formation were found to be greater when the pins slid perpendicular to the unidirectional grinding marks than when the pins slid parallel to the grinding marks. In addition, a stick-slip phenomenon was observed under lubricated conditions at the highest inclination angle for sliding perpendicular to the grinding marks direction. This phenomenon could be attributed to the extent of plane strain conditions taking place at the asperity level during sliding. DOI: 10.1115/1.4002604]

Asuntopolitiikka ja vieraskielisen väestön alueellinen keskittyminen Helsingissä vuosina 1992-2005

The aim of the thesis was to study the extent of spatial concentration of immigrant population in Helsinki and to analyse the impact of housing policy on ethnic residential segregation in 1992-2005. For the purpose of the study, immigrant population was defined based on the language spoken at home. The theory of residential segregation by Andersson and Molina formed the main theoretical framework for the study. According to Andersson and Molina ethnic residential segregation results from different dynamic intra-urban migration processes. Institutionally generated migration, i.e. migration patterns generated by various housing and immigrant policies and procedures, is one of the central factors in the development of ethnic segregation. The data of the study consisted of population and housing statistics and housing and immigrant policy documents of Helsinki municipality. Spatial concentration of immigrant population was studied both at district and building levels using GIS-methods and statistical methods. The housing policy of Helsinki municipality was analysed using a method created by Musterd et al. Musterd et al. categorise two types of policy approaches to residential segregation: spatial dispersion policy and compensating policy. The housing policy of Helsinki has a strong focus on social mixing and spatial dispersion of housing stock. Ethnic segregation is regarded as a threat. The importance of ethnic communities and networks is, however, acknowledged and small-scale concentration is therefore not considered harmful. Despite the spatial dispersion policy, the immigrant population is concentrated in the eastern, north-eastern and north-western suburbs of Helsinki. The spatial pattern of concentration was formed already at the beginning of the 1990's when immigration to Finland suddenly peaked. New immigrant groups were housed in the neighbourhoods where public housing was available at the time. Housing policy, namely the location of new residential areas and public housing blocks and the policies of public housing allocation were key factors influencing the residential patterns of immigrant population in the 1990's. The immigration and refugee policies of the state have also had an impact on the development. The concentration of immigrant population has continued in the same areas in the beginning of the 2000's. Dispersion to new areas has mainly taken place within the eastern and north-eastern parts of the city or in the adjacent areas. The migration patterns of native population and the reasonably rapid changes in the housing market have emerged as new factors generating and influencing the ethnic residential segregation in Helsinki in the 2000's. Due to social mixing and spatial dispersion policies, ethnic segregation in Helsinki has so far been fairly small-scale, concentrated in particular housing blocks. The number of residential buildings with a high share of immigrant population is very modest. However, the number of such buildings has doubled between 1996-2002. The concentration of immigrant population concerns mainly the public housing sector. The difference in the level of concentration between the public housing sector and privately owned housing companies is remarkable.

Helsingin kävelykeskustan suunnittelu ydinkeskustan kadunvarsiliikeyrittäjien näkökulmasta

Aiempien tutkimusten mukaan keskustayrittäjien kielteinen asenne on olennaisesti vaikeuttanut kävelykatujen toteuttamista kaupunkikeskustoissa. Yrittäjät pelkäävät ostokykyisten asiakkaiden kaikkoavan ja liikevaihtonsa pienenevän kävelykeskustauudistusten myötä. Yrittäjien kielteiset asenteet ovat usein myös painottuneet suuriin kaupunkeihin. Etenkin ydinkeskustassa sijaitsevat kadunvarsiliikeyrittäjät ovat kokeneet kävelykadut ongelmiksi. Tämän tutkimuksen tavoitteena on selvittää, mikä on ydinkeskustan kadunvarsiliikeyrittäjien näkemys Helsingin kävelykeskustan suunnittelusta, millaisena ydinkeskustan kadunvarsiliikeyrittäjät näkevät sijaintikatunsa kävelykeskustan suunnittelupäämäärien kautta tarkasteltuna, ja onko kävelykatuyrittäjien ja kävelykatujen ulkopuolella sijaitsevien yrittäjien näkemysten välillä eroja. Taustana tälle tarkastellaan Helsingin kävelykeskustaa pohjoismaisessa kontekstissa, ja käydään läpi Helsingin kävelykeskustan suunnittelun ja rakentumisen historiaa ja päämääriä. Tutkimuksen aineisto koostuu Helsingin ydinkeskustan kadunvarsiliikeyrittäjille tehdystä kyselystä, kävelykeskustoihin liittyvistä tutkimuksista ja selvityksistä, kaupunkisuunnitteluun ja -tutkimukseen liittyvästä tutkimuskirjallisuudesta, sanomalehtiartikkeleista, ydinkeskustassa tehdystä empiirisestä havainnoinnista ja kahdesta asiantuntijahaastattelusta. Kyselyaineistoa analysoidaan tutkimuksessa tilastollisten menetelmien avulla. Helsingin kävelykeskustan suunnittelu ja rakentuminen on ollut pitkällinen prosessi. Vuoden 1 989 kävelykeskustan periaatesuunnitelmasta on konkretisoitunut Kluuvikatu ja Mikonkatu. Keskustatunnelihanke on vaakalaudalla, minkä vuoksi kävelykeskustan uuden periaatesuunnitelman toteutuminen on epävarmaa. Kävelykeskustan rakentuminen kuitenkin etenee. Keskuskatu ja Kalevankadun itäpää muutetaan kävelykaduiksi ja ydinkeskustan jalankulkuympäristöä parannetaan ja kehitetään jatkuvasti. Tällä hetkellä kävelykeskustan suunnittelun painopiste on Aleksanterinkadun kortteleiden ympäristössä, ja suunnittelun tärkeimpiä päämääriä ovat viihtyisyyden, turvallisuuden, kaupallisen vetovoimaisuuden ja saavutettavuuden parantaminen. Kyselyyn vastanneiden yrittäjien mielestä kävelykeskustaa tulisi laajentaa, sillä laajemman kävelykeskustan nähdään kasvattavan liikevaihtoa ja lisäävän yleisesti ydinkeskustan vetovoimaa. Kävelykatuyrittäjien näkemykset kävelykeskustan suunnittelusta ja kehittämisestä olivat kävelykatujen ulkopuolisia yrittäjiä kielteisempiä. Em. yrittäjien asenteisiin vaikuttavat oletettavasti tutkituilla kävelykaduilla ilmenneet ongelmat. Kyse voi myös olla siitä, että uusien kävelykatujen rakentaminen haittaa kävelykatujen saavutettavuutta. Kadunvarsiliikeyrittäjien yleinen suhtautuminen kävelykeskustan kehittämiseen ja suunnittelupäämääriin on kuitenkin pääosin positiivista. Jatkotutkimuksen kannalta olisi kiinnostavaa selvittää, onko muiden ydinkeskustassa toimivien yritysten, kuten esimerkiksi tavaratalojen ja kauppakeskusten johdon ja kiinteistösijoittajien ja -omistajien suhtautuminen kävelykeskustan kehittämiseen myös positiivista. Tämän lisäksi olisi mielenkiintoista selvittää keskustan käyttäjien ja keskustassa asuvien asenteita kävelykeskustan suunnitteluun, ja verrata tuloksia tässä tutkimuksessa selvitettyihin kadunvarsiliikeyrittäjien näkemyksiin.

Elämää keskustassa ja kaupunkiseudun reunoilla. Urbaani ja jälkiesikaupungillinen elämäntyyli asumisen valinnoissa ja arkiliikkumisessa Helsingin seudulla.

The lifestyles of people living in single-family housing areas on the outskirts of the Greater Helsinki Region (GHR) are different from those living in inner city area. The urban structure of the GHR is concentrated in the capital on the one hand, and spread out across the outskirts on the other. Socioeconomic spatial divisions are evident as well-paid and educated residents move to the inner city or the single-family house dominated suburban neighbourhoods depending on their housing preferences and life situations. The following thesis explores how these lifestyles have emerged through the housing choices and daily mobility of the residents living in the new single-family housing areas on the outskirts of the GHR and the inner city. The study shows that, when it comes to lifestyles, residents on the outskirts of the region have different housing preferences and daily mobility patterns when compared with their inner city counterparts. Based on five different case study areas my results show that these differences are related to residents values, preferences and attitudes towards the neighbourhood, on the one hand, and limited by urban structure on the other. This also confirms earlier theoretical analyses and findings from the GHR. Residents who moved to the outskirts of Greater Helsinki Region and the apartment buildings of the inner city were similar in the basic elements of their housing preferences: they sought a safe and peaceful neighbourhood close to the natural environment. However, where housing choices, daily mobility and activities vary different lifestyles develop in both the outskirts and the inner city. More specifically, lifestyles in the city apartment blocks were inherently urban. Liveliness and highest order facilities were appreciated and daily mobility patterns were supported by diverse modes of transportation for the purposes of work, shopping and leisure time. On the outskirts, by contrast, lifestyles were largely post-suburban and child-friendliness appreciated. Due to the heterachical urban structure, daily mobility was more car-dependent since work, shopping and free time activities of the residents are more spread around the region. The urban structure frames the daily mobility on the outskirts of the region, but this is not to say that short local trips replace longer regional ones. This comparative case study was carried out in the single-family housing areas of Sundsberg in Kirkkonummi, Landbo in Helsinki and Ylästö in Vantaa, as well as in the inner city apartment building areas of Punavuori and Katajanokka in Helsinki. The data is comprised of residential surveys, interviews, and statistics and GIS data sets that illustrate regional daily mobility, socio-economic structure and vis-à-vis housing stock.

Texture evolution and operative mechanisms during large-strain deformation of nanocrystalline nickel

The large-strain deformation of nanocrystalline nickel was investigated at room temperature and cryogenic (liquid N-2) temperature. Deformation mechanisms ranging from grain boundary sliding to slip, operate due to a wide distribution of grain sizes. These mechanisms leave their finger print in the deformation texture evolution during rolling of nanocrystalline nickel. The occurrence and severance of different mechanisms is understood by a thorough characterization of the deformed samples using X-ray diffraction, X-ray texture measurements, electron back-scattered diffraction and transmission electron microscopy. Crystal plasticity-based viscoplastic self-consistent simulations were used to further substantiate the experimental observations. Thus, a comprehensive understanding of deformation behavior of nanocrystalline nickel, which is characterized by simultaneous operation of dislocation-dominated and grain boundary-mediated mechanisms, has been developed.

Area Optimized H.264 Intra Prediction Architecture for 1080p HD Resolution

High performance video standards use prediction techniques to achieve high picture quality at low bit rates. The type of prediction decides the bit rates and the image quality. Intra Prediction achieves high video quality with significant reduction in bit rate. This paper present an area optimized architecture for Intra prediction, for H.264 decoding at HDTV resolution with a target of achieving 60 fps. The architecture was validated on Virtex-5 FPGA based platform. The architecture achieves a frame rate of 64 fps. The architecture is based on multi-level memory hierarchy to reduce latency and ensure optimum resources utilization. It removes redundancy by reusing same functional blocks across different modes. The proposed architecture uses only 13% of the total LUTs available on the Xilinx FPGA XC5VLX50T.

The scratch hardness and friction of a soft rigid-plastic solid

The paper describes an experimental and analytical study of the normal and scratch hardnesses of a model soft rigid-plastic solid. The material known as ‘Plasticine’, a mixture of dry particles and a mineral oil, has been deformed with a range of rigid conical indentors with included angles of between 30° and 170°. The sliding velocity dependence of the computed scratch hardness and friction has been examined in the velocity range 0.19 mm/s to 7.3 m/s. Data are also described for the time dependence of the normal hardness and also the estimated rate dependence of the intrinsic flow stress. The latter values were estimated from data obtained during the upsetting of right cylinders. Three major conclusions are drawn from these data and the associated analysis. (1) A first-order account of the scratching force may be provided by adopting a model which sums the computed plastic deformation and interfacial sliding contributions to the total sliding work. This is tantamount to the adoption of the two-term non-interacting model of friction. (2) For this system during sliding, at high sliding velocities at least, the interface shear stress which defines the boundary condition is not directly related to the bulk shear stress. The interface rheological characteristics indicate an appreciable dependence on the imposed strain or strain rate. In particular, the relative contributions of the slip and stick boundary conditions appear to be a function of the imposed sliding velocity. (3) The computed normal and scratch hardness values are not simply interrelated primarily because of the evolving boundary conditions which appear to exist in the scratching experiments.

Toward Effective Scalar Hardware for Highly Vectorizable Applications

The performance of a program will ultimately be limited by its serial (scalar) portion, as pointed out by Amdahl′s Law. Reported studies thus far of instruction-level parallelism have mixed data-parallel program portions with scalar program portions, often leading to contradictory and controversial results. We report an instruction-level behavioral characterization of scalar code containing minimal data-parallelism, extracted from highly vectorized programs of the PERFECT benchmark suite running on a Cray Y-MP system. We classify scalar basic blocks according to their instruction mix, characterize the data dependencies seen in each class, and, as a first step, measure the maximum intrablock instruction-level parallelism available. We observe skewed rather than balanced instruction distributions in scalar code and in individual basic block classes of scalar code; nonuniform distribution of parallelism across instruction classes; and, as expected, limited available intrablock parallelism. We identify frequently occurring data-dependence patterns and discuss new instructions to reduce latency. Toward effective scalar hardware, we study latency-pipelining trade-offs and restricted multiple instruction issue mechanisms.

Friction-formed liquid droplets

The formation of nanoscale liquid droplets by friction of a solid is observed in real-time. This is achieved using a newly developed in situ transmission electron microscope (TEM) triboprobe capable of applying multiple reciprocating wear cycles to a nanoscale surface. Dynamical imaging of the nanoscale cyclic rubbing of a focused-ion-beam (FIB) processed Al alloy by diamond shows that the generation of nanoscale wear particles is followed by a phase separation to form liquid Ga nanodroplets and liquid bridges. The transformation of a two-body system to a four-body solid-liquid system within the reciprocating wear track significantly alters the local dynamical friction and wear processes. Moving liquid bridges are observed in situ to play a key role at the sliding nanocontact, interacting strongly with the highly mobile nanoparticle debris. In situ imaging demonstrates that both static and moving liquid droplets exhibit asymmetric menisci due to nanoscale surface roughness. Nanodroplet kinetics are furthermore dependent on local frictional temperature, with solid-like surface nanofilaments forming on cooling. TEM nanotribology opens up new avenues for the real-time quantification of cyclic friction, wear and dynamic solid-liquid nanomechanics, which will have widespread applications in many areas of nanoscience and nanotechnology.

Fracture Properties of Concrete-Concrete Interfaces Using Digital Image Correlation

The mode I and mode II fracture toughness and the critical strain energy release rate for different concrete-concrete jointed interfaces are experimentally determined using the Digital Image Correlation technique. Concrete beams having different compressive strength materials on either side of a centrally placed vertical interface are prepared and tested under three-point bending in a closed loop servo-controlled testing machine under crack mouth opening displacement control. Digital images are captured before loading (undeformed state) and at different instances of loading. These images are analyzed using correlation techniques to compute the surface displacements, strain components, crack opening and sliding displacements, load-point displacement, crack length and crack tip location. It is seen that the CMOD and vertical load-point displacement computed using DIC analysis matches well with those measured experimentally.

A Cache coherence protocol for MIN-based multiprocessors

In this paper we present a cache coherence protocol for multistage interconnection network (MIN)-based multiprocessors with two distinct private caches: private-blocks caches (PCache) containing blocks private to a process and shared-blocks caches (SCache) containing data accessible by all processes. The architecture is extended by a coherence control bus connecting all shared-block cache controllers. Timing problems due to variable transit delays through the MIN are dealt with by introducing Transient states in the proposed cache coherence protocol. The impact of the coherence protocol on system performance is evaluated through a performance study of three phases. Assuming homogeneity of all nodes, a single-node queuing model (phase 3) is developed to analyze system performance. This model is solved for processor and coherence bus utilizations using the mean value analysis (MVA) technique with shared-blocks steady state probabilities (phase 1) and communication delays (phase 2) as input parameters. The performance of our system is compared to that of a system with an equivalent-sized unified cache and with a multiprocessor implementing a directory-based coherence protocol. System performance measures are verified through simulation.

Friction and wear behaviour of continuous fibre as cast Kevlar-phenolic resin composite

A compression moulded Kevlar-phenolic resin composite consisting of 30 wt% continuous fibres was slid against a steel disc such that the fibre axis was normal to the sliding plane. The sliding experiments were conducted in a normal pressure range of 0.47–4.27 MPa and at a sliding speed of 0.5 ms–1. The initial sliding interaction is abrasive. With further sliding, as patches of polymer transfer film develop on the polymer pin and counterface, the interaction becomes adhesive and steady-state friction is established. The wear resistance of the polymer was found to be related to the stability of this film.