The feasibility and acceptability of trial procedures for a pragmatic randomised controlled trial of a structured physical activity intervention for people diagnosed with colorectal cancer : findings from a pilot trial of cardiac rehabilitation versus usual care (no rehabilitation) with an embedded qualitative study

Funding This work is supported by the National Institute for Health Research—Health Service and Development Research, Project reference number: NIHR—HS&DR Project:12/5001/09.

The use of cardiac rehabilitation services to aid the recovery of patients with bowel cancer : a pilot randomised controlled trial with embedded feasibility study

This project was funded by the National Institute for Health Research (NIHR) Health Services and Delivery Research programme and will be published in full in Health Services and Delivery Research; Vol. 4, No. 24. See the NIHR Journals Library website for further project information.

Études psychophysiques de l'apprentissage sensori-discriminatif de la douleur

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Proposta de arquitetura para monitorização de parâmetros vitais com recurso à tecnologia Bluetooth Low Energy

Atualmente, com o crescimento exponencial das tecnologias de comunicação móveis, cada vez mais existe uma utilização generalizada de dispositivos móveis que adotam normas de última geração para redes de área corporal (BAN), como o Bluetooth Low Energy. Estas normas vieram revolucionar a monitorização de parâmetros vitais, permitindo que esta seja efetuada em qualquer lugar e momento e que ocorra uma redução do consumo energético. Se tivermos em consideração as doenças mais causadoras de morte, a tendência de envelhecimento da população e a dificuldade de acesso e acompanhamento médico por parte de pacientes com incapacidades, a monitorização remota de parâmetros vitais surge como um auxiliar clínico para um diagnóstico melhor, mais rápido e mais fiável. O presente projeto tem como objetivo especificar uma arquitetura para monitorização remota de parâmetros vitais no sentido de criar uma solução pronta a usar, simples, eficiente, segura, de baixo custo e compatível com dispositivos móveis de última geração. A monitorização remota será efetuada com recurso ao dispositivo móvel, que o paciente já possui, através de uma aplicação que atua como intermediária entre os sensores biofísicos que efetuam a recolha de dados vitais e a plataforma onde estes serão armazenados. Após o envio dos dados para a plataforma é possível o seu acesso pelos profissionais de saúde para que assim os tenham em consideração ao efetuar diagnósticos. Os testes realizados mostram a facilidade e simplicidade de utilização do sistema, fatores muito importantes, bem como a fiabilidade na leitura de parâmetros vitais.

Proposta de arquitetura para monitorização de parâmetros vitais com recurso à tecnologia Bluetooth Low Energy

Atualmente, com o crescimento exponencial das tecnologias de comunicação móveis, cada vez mais existe uma utilização generalizada de dispositivos móveis que adotam normas de última geração para redes de área corporal (BAN), como o Bluetooth Low Energy. Estas normas vieram revolucionar a monitorização de parâmetros vitais, permitindo que esta seja efetuada em qualquer lugar e momento e que ocorra uma redução do consumo energético. Se tivermos em consideração as doenças mais causadoras de morte, a tendência de envelhecimento da população e a dificuldade de acesso e acompanhamento médico por parte de pacientes com incapacidades, a monitorização remota de parâmetros vitais surge como um auxiliar clínico para um diagnóstico melhor, mais rápido e mais fiável. O presente projeto tem como objetivo especificar uma arquitetura para monitorização remota de parâmetros vitais no sentido de criar uma solução pronta a usar, simples, eficiente, segura, de baixo custo e compatível com dispositivos móveis de última geração. A monitorização remota será efetuada com recurso ao dispositivo móvel, que o paciente já possui, através de uma aplicação que atua como intermediária entre os sensores biofísicos que efetuam a recolha de dados vitais e a plataforma onde estes serão armazenados. Após o envio dos dados para a plataforma é possível o seu acesso pelos profissionais de saúde para que assim os tenham em consideração ao efetuar diagnósticos. Os testes realizados mostram a facilidade e simplicidade de utilização do sistema, fatores muito importantes, bem como a fiabilidade na leitura de parâmetros vitais.

Optical fiber sensors embedded in flexible polymer foils

In traditional electrical sensing applications, multiplexing and interconnecting the different sensing elements is a major challenge. Recently, many optical alternatives have been investigated including optical fiber sensors of which the sensing elements consist of fiber Bragg gratings. Different sensing points can be integrated in one optical fiber solving the interconnection problem and avoiding any electromagnetical interference (EMI). Many new sensing applications also require flexible or stretchable sensing foils which can be attached to or wrapped around irregularly shaped objects such as robot fingers and car bumpers or which can even be applied in biomedical applications where a sensor is fixed on a human body. The use of these optical sensors however always implies the use of a light-source, detectors and electronic circuitry to be coupled and integrated with these sensors. The coupling of these fibers with these light sources and detectors is a critical packaging problem and as it is well-known the costs for packaging, especially with optoelectronic components and fiber alignment issues are huge. The end goal of this embedded sensor is to create a flexible optical sensor integrated with (opto)electronic modules and control circuitry. To obtain this flexibility, one can embed the optical sensors and the driving optoelectronics in a stretchable polymer host material. In this article different embedding techniques for optical fiber sensors are described and characterized. Initial tests based on standard manufacturing processes such as molding and laser structuring are reported as well as a more advanced embedding technique based on soft lithography processing.

Solid-state synthesis of embedded single-crystal metal oxide and phosphate nanoparticles and in situ crystallization

A new solid state organometallic route to embedded nanoparticle-containing inorganic materials is shown, through pyrolysis of metal-containing derivatives of cyclotriphosphazenes. Pyrolysis in air and at 800 °C of new molecular precursors gives individual single-crystal nanoparticles of SiP2O7, TiO2, P4O7, WP2O7 and SiO2, depending on the precursor used. High resolution transmission electron microscopy investigations reveal, in most cases, perfect single crystals of metal oxides and the first nanostructures of negative thermal expansion metal phosphates with diameters in the range 2–6 nm for all products. While all nanoparticles are new by this method, WP2O7 and SiP2O7 nanoparticles are reported for the first time. In situ recrystallization formation of nanocrystals of SiP2O7 was also observed due to electron beam induced reactions during measurements of the nanoparticulate pyrolytic products SiO2 and P4O7. The possible mechanism for the formation of the nanoparticles at much lower temperatures than their bulk counterparts in both cases is discussed. Degrees of stabilization from the formation of P4O7 affects the nanocrystalline products: nanoparticles are observed for WP2O7, with coalescing crystallization occurring for the amorphous host in which SiP2O7 crystals form as a solid within a solid. The approach allows the simple formation of multimetallic, monometallic, metal-oxide and metal phosphate nanocrystals embedded in an amorphous dielectric. The method and can be extended to nearly any metal capable of successful coordination as an organometallic to allow embedded nanoparticle layers and features to be deposited or written on surfaces for application as high mobility pyrophosphate lithium–ion cathode materials, catalysis and nanocrystal embedded dielectric layers.

Optical emission of strained direct-band-gap Ge quantum well embedded inside InGaAs alloy layers

We studied the optical properties of a strain-induced direct-band-gap Ge quantum well embedded in InGaAs. We showed that the band offsets depend on the electronegativity of the layer in contact with Ge, leading to different types of optical transitions in the heterostructure. When group-V atoms compose the interfaces, only electrons are confined in Ge, whereas both carriers are confined when the interface consists of group-III atoms. The different carrier confinement results in different emission dynamics behavior. This study provides a solution to obtain efficient light emission from Ge.

Études psychophysiques de l'apprentissage sensori-discriminatif de la douleur

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Supporting the Model-Driven Development of Real-time Embedded Systems with Run-Time Monitoring and Animation via Highly Customizable Code Generation

This paper presents a vision that allows the combined use of model-driven engineering, run-time monitoring, and animation for the development and analysis of components in real-time embedded systems. Key building block in the tool environment supporting this vision is a highly-customizable code generation process. Customization is performed via a configuration specification which describes the ways in which input is provided to the component, the ways in which run-time execution information can be observed, and how these observations drive animation tools. The environment is envisioned to be suitable for different activities ranging from quality assurance to supporting certification, teaching, and outreach and will be built exclusively with open source tools to increase impact. A preliminary prototype implementation is described.

Polymer Light-Emitting Electrochemical Cells with Embedded Bipolar Electrodes: Visualizing Bipolar Electrochemistry in Solid State

The work presented in this thesis examines the properties of BPEs of various configurations and under different operating conditions in a large planar LEC system. Detailed analysis of time-lapsed fluorescence images allows us to calculate the doping propagation speed from the BPEs. By introducing a linear array of BPEs or dispersed ITO particles, multiple light-emitting junctions or a bulk homojunction have been demonstrated. In conclusion, it has been observed that both applied bias voltages and sizes of BPEs affected the electrochemical doping from the BPE. If the applied bias voltage was initially not sufficiently high enough, a delay in appearance of doping from the BPE would take place. Experiments of parallel BPEs with different sizes (large, medium, small) demonstrate that the potential difference across the BPEs has played a vital role in doping initiation. Also, the p-doping propagation distance from medium-sized BPE has displayed an exponential growth over the time-span of 70 seconds. Experiments with a linear array of BPEs with the same size demonstrate that the doping propagation speed of each floating BPE was the same regardless of its position between the driving electrodes. Probing experiments under high driving voltages further demonstrated the potential of having a much more efficient light emission from an LEC with multiple BPEs.

Utility of sarcoma-specific fusion gene analysis in paraffin-embedded material for routine diagnosis at a specialist centre.

AIMS: Diagnosis of soft tissue sarcomas can be difficult. It can be aided by detection of specific genetic aberrations in many cases. This study assessed the utility of a molecular genetics/cytogenetics service as part of the routine diagnostic service at the Royal Marsden Hospital. METHODS: A retrospective audit was performed over a 15-month period to evaluate the diagnostic usefulness for soft tissue sarcomas with translocations of fluorescence in situ hybridisation (FISH) and reverse-transcriptase PCR (RT-PCR) in paraffin-embedded (PE) material. Results were compared with histology, and evaluated. RESULTS: Molecular investigations were performed on PE material in 158 samples (total 194 RT-PCR and 174 FISH tests), of which 85 were referral cases. Synovial sarcoma, Ewing sarcoma and low-grade fibromyxoid sarcoma were the most commonly tested tumours. Myxoid liposarcoma showed the best histological and molecular concordance, and alveolar rhabdomyosarcoma showed the best agreement between methods. FISH had a higher sensitivity for detecting tumours (73%, compared with 59% for RT-PCR) with a better success rate than RT-PCR, although the latter was specific in identifying the partner gene for each fusion. In particular, referral blocks in which methods of tissue fixation and processing were not certain resulted in higher RT-PCR failure rates. CONCLUSIONS: FISH and RT-PCR on PE tissue are practical and effective ancillary tools in the diagnosis of soft tissue sarcomas. They are useful in confirming doubtful histological diagnoses and excluding malignant diagnoses. PCR is less sensitive than FISH, and the use of both techniques is optimal for maximising the detection rate of translocation-positive sarcomas.

The making of professionals: Embedded civil society development in a transition country

The paper addresses the development of non-governmental organisations (NGOs) in transition settings. Caught in the balance of knowledge exchange and translation of ideas from abroad, organisations in turbulent setting legitimise their existence by learning through professional networks. By association, organisational actors gain acknowledgement by their sector by traversing the corridors of influence provided by international partnerships. What they learn is how to conduct themselves as agents of change in society, and how to deliver on stated missions and goals, therefore, legitimising their presence in a budding civil society at home. The paper presents a knowledge production and learning practices framework which indicates a presence of dual identity of NGOs - their “embeddedness” locally and internationally. Selected framework dimensions and qualitative case study themes are discussed with respect to the level of independence of organisational actors in the East from their partners in the West in a post-socialist context. A professional global civil society as organisations are increasingly managed in similar, professional ways (Anheier & Themudo 2002). Here knowledge “handling” and knowledge “translation” take place through partnership exchanges fostering capable and/or competitive change-inducing institutions (Czarniawska & Sevon 2005; Hwang & Suarez 2005). How professional identity presents itself in the third sector, as well as the sector’s claim to expertise, need further attention, adding to ongoing discussions on professions in institutional theory (Hwang & Powell 2005; Scott 2008; Noordegraaf 2011). A conceptual framework on the dynamic involved for the construction professional fields follows: • Multiple case analysis provides a taxonomy for understanding what is happening in knowledge transition, adaptation, and organisational learning capacity for NGOs with respect to their role in a networked civil society. With the model we can observe the types of knowledge produced and learning employed by organisations. • There are elements of professionalisation in third sector work organisational activity with respect to its accreditation, sources and routines of learning, knowledge claims, interaction with the statutory sector, recognition in cross-sector partnerships etc. • It signals that there is a dual embeddedness in the development of the sector at the core to the shaping the sector’s professional status. This is instrumental in the NGOs’ goal to gain influence as institutions, as they are only one part of a cross-sector mission to address complex societal problems The case study material highlights nuances of knowledge production and learning practices in partnerships, with dual embeddedness a main feature of the findings. This provides some clues to how professionalisation as expert-making takes shape in organisations: • Depending on the type of organisations’ purpose, over its course of development there is an increase in participation in multiple networks, as opposed to reliance on a single strategic partner for knowledge artefacts and practices; • Some types of organisations are better connected within international and national networks than others and there seem to be preferences for each depending on the area of work; • The level of interpretation or adaptation of the knowledge artefacts is related to an organisation’s embeddedness locally, in turn giving it more influence within the network of key institutions; An overreaching theme across taxonomy categories (Table 1)is “professionalisation” or developing organisational “expertise”, embodied at the individual, organisational, and sector levels. Questions relevant to the exercise of power arise: Is competence in managing a dual embeddedness signals the development of a dual identity in professionalisation? Is professionalisation in this sense a sign of organisations maturing into more capable partners to the arguably more experienced (Western) institutions, shifting the power balance? Or is becoming more professional a sign of domestication to the agenda of certain powerful stakeholders, who define the boundaries of the profession? Which dominant dynamics can be observed in a broadly-defined transition country civil society, where individual participation in the form of activism may be overtaking the traditional forms of organised development work, especially with the spread of social media?

Towards automated Android app collusion detection

Android OS supports multiple communication methods between apps. This opens the possibility to carry out threats in a collaborative fashion, c.f. the Soundcomber example from 2011. In this paper we provide a concise definition of collusion and report on a number of automated detection approaches, developed in co-operation with Intel Security.