The learning about imaging diagnosis technology

Objective To investigate the learning about management of the technology (efficient use, acquisition and maintenance of imaging diagnosis equipment) in the radiology residency program of Escola Paulista de Medicina - Universidade Federal de São Paulo, with a view to improving the education of radiologists. Materials and Methods Exploratory research where residents, faculty staff and tutors of the program were quantitative and qualitatively approached with Likert scale questionnaires (46), and deepening with recorded interviews (18) and categorization based upon meaning units (thematic analysis). Results Among the participants, 66% agreed that they had the opportunity of learning about the use of radiological equipment; for 61% the program should include knowledge on the importance of acquiring equipment; and 72% emphasized the lack of learning about equipment management and maintenance. Conclusion As the major moment in the education of specialists, the medical residency program provides residents with a favorable environment to the learning of the skills required to the future of their professional practice, but with limited emphasis on the management of the technology: efficient use, acquisition and mainly maintenance of equipment, still poorly explored. Both the investigated program and the medical residency in radiology should incorporate, whenever possible, the commitment with the training in supplementary skills related to equipment management, developing the competence of the future radiologists.

Learning on human resources management in the radiology residency program

Objective To investigate the process of learning on human resource management in the radiology residency program at Escola Paulista de Medicina – Universidade Federal de São Paulo, aiming at improving radiologists' education. Materials and Methods Exploratory study with a quantitative and qualitative approach developed with the faculty staff, preceptors and residents of the program, utilizing a Likert questionnaire (46), taped interviews (18), and categorization based on thematic analysis. Results According to 71% of the participants, residents have clarity about their role in the development of their activities, and 48% said that residents have no opportunity to learn how to manage their work in a multidisciplinary team. Conclusion Isolation at medical records room, little interactivity between sectors with diversified and fixed activities, absence of a previous culture and lack of a training program on human resources management may interfere in the development of skills for the residents' practice. There is a need to review objectives of the medical residency in the field of radiology, incorporating, whenever possible, the commitment to the training of skills related to human resources management thus widening the scope of abilities of the future radiologists.

In cortical neurons HDAC3 suppresses RD4-dependent SMRT export

The transcriptional corepressor SMRT controls neuronal responsiveness of several transcription factors and can regulate neuroprotective and neurogenic pathways. SMRT is a multi-domain protein that complexes with HDAC3 as well as being capable of interactions with HDACs 1, 4, 5 and 7. We previously showed that in rat cortical neurons, nuclear localisation of SMRT requires histone deacetylase activity: Inhibition of class I/II HDACs by treatment with trichostatin A (TSA) causes redistribution of SMRT to the cytoplasm, and potentiates the activation of SMRT-repressed nuclear receptors. Here we have sought to identify the HDAC(s) and region(s) of SMRT responsible for anchoring it in the nucleus under normal circumstances and for mediating nuclear export following HDAC inhibition. We show that in rat cortical neurons SMRT export can be triggered by treatment with the class I-preferring HDAC inhibitor valproate and the HDAC2/3-selective inhibitor apicidin, and by HDAC3 knockdown, implicating HDAC3 activity as being required to maintain SMRT in the nucleus. HDAC3 interaction with SMRT's deacetylation activation domain (DAD) is known to be important for activation of HDAC3 deacetylase function. Consistent with a role for HDAC3 activity in promoting SMRT nuclear localization, we found that inactivation of SMRT's DAD by deletion or point mutation triggered partial redistribution of SMRT to the cytoplasm. We also investigated whether other regions of SMRT were involved in mediating nuclear export following HDAC inhibition. TSA- and valproate-induced SMRT export was strongly impaired by deletion of its repression domain-4 (RD4). Furthermore, over-expression of a region of SMRT containing the RD4 region suppressed TSA-induced export of full-length SMRT. Collectively these data support a model whereby SMRT's RD4 region can recruit factors capable of mediating nuclear export of SMRT, but whose function and/or recruitment is suppressed by HDAC3 activity. Furthermore, they underline the fact that HDAC inhibitors can cause reorganization and redistribution of corepressor complexes.

Mentoring in the acquisition of professional skills through practices in companies by degree students

Abstract This work has had as objective to analyze the skills acquired through internships in business companies by students of the Faculty of Economics and Business at the University Pompeu Fabra. The internship is a basic item in order to obtain a hard connection between the University and social-economic world where University and Enterprises develop their activity. In this study we want to know about two aspects. The first one, we want to know the profit that is obtained from the Student as a consequence of internship and mentoring. Also, we want to study about the importance of mentoring as a principal element that establishes the relationship between the Student and the Company. Moreover, it has sought to analyze if certain factors such as the size of the company where the practices has been performed, the study rank level that was achieved or the fact of being a man or a woman, were among the determining factors at the time of acquiring the skills. The results presented here indicate that the size of the company that have been making the practices and the gender of the student are related to the acquisition of certain skills. There was not a statistically significant relationship related to the rank level have by the students in the practice. In the future we are going to study if the labor market Integration is easier if the Student has performed work placement. Keywords Skills; employability; internship; meatoring.

University teacher competences in a virtual teaching/learning environment : analysis of a teacher training experience

This paper attempts to shed light on the competencies a teacher must have inorder to teach in online university environments. We will relate a teacher trainingexperience, which was designed taking into account the methodological criteriaestablished in line with previous theoretical principles. The main objective of ouranalysis is to identify the achievements and difficulties of a specific formativeexperience, with the ultimate goal of assessing the suitability of this conceptualmethodologicalframework for the design of formative proposals aiming to contribute tothe development of teacher competencies for virtual environments.

Currículo de licenciatura em química da universidade de brasília: uma proposta em implantação

This article presents the conception, principles and academic structure of the evening course leading to the formation of a Licentiate in Chemistry, at the University of Brasília. The curriculum has been carried out since the beginning of 1993. This curriculum has as its basic axis the graduation of future teachers integrated with the conceptual formation in Chemistry. Interdisciplinary actions are planned between the Chemistry Department, the Psychology Institute and the Faculty of Education so as to provide mechanisms which would allow the licenciate to acquire teaching experience along the course.

Coatings on Composites

Polymer based composite materials coated with thin layers of wear resistant materials have been proposed as replacements for steel components for certain applications with the advantage of reduced mass. Magnetron sputtered coatings can be successfully deposited on composite materials. Nevertheless there are number of issues which must be addressed such as limited temperature, which the composite can withstand because of the epoxy binder which is used, the adhesion of the coating to the composite and the limited mechanical support, the hard coating can obtain from the relatively soft epoxy. We have investigated the deposition of chromium nitride, titanium carbide and titanium doped DLC coatings on carbon fibre reinforced composites and various polymers. The adhesion of the coatings has been studied by the pull-off adhesion tester. In general, the failure mechanism has been noticed to be due to the cohesive failure for a wide range of conditions. The wear behavior of the coatings has been noticed to be complicated. Wear tests on coated composites have shown that where the reinforcing fibres are near the surface, the composite samples do not perform well due to breakage of the fibres from the polymer matrix. A fibre free surface has been noticed to improve the wear resistance.

Risk of hypoglycemia in newborns from mothers with gestacional diabetes

There are not enough previous publications which are focused on mothers with well-controlled gestational diabetes mellitus (GDM) as a risk factor that determines the occurrence of neonatal hypoglycemia. In addition, approaches to blood glucose monitoring have been inconsistent and poorly defined. Our objective is to determine if being a newborn from a mother with well-controlled gestational diabetes (regardless insulin treatment) have a higher risk to develop hypoglycemia than a healthy newborn, using a defined and strict protocol. The project will take place in a regional hospital of Girona. We will recruit from 2014 to 2015 a cohort of 623 infants born in this center without any malformation or any perinatal pathology or complication, selected with a consecutive sampling. We will record sex, ethnicity and gestational age information. We will measure blood glucose levels and anthropometric measurements in newborns always taking into account the presence of well-controlled maternal gestational diabetes or not. Patients will be followed up during 24 hours to determine the incidence of hypoglycemia. We will analyze the contribution between exposure factors that we have studied and the incidence of the outcome using a multivariate analysis

Literature review on permanent magnet generators design and dynamic behavior

This paper is a literature review which describes the construction of state of the art of permanent magnet generators and motors constructing and discusses the current and possible application of these machines in industry. Permanent magnet machines are a well-know class of rotating and linear electric machines used for many years in industrial applications. A particular interest for permanent magnet generators is connected with wind mills, which seem to be becoming increasingly popular nowadays. Geared and direct-driven permanent magnet generators are described. A classification of direct-driven permanent magnet generators is given. Design aspects of permanent magnet generators are presented. Permanent magnet generators for wind turbines designs are highlighted. Dynamics and vibration problems of permanent magnet generators covered in literature are presented. The application of the Finite Element Method for mechanical problems solution in the field of permanent magnet generators is discussed.

Capillary thermal desorption unit for near real-time analysis of VOCs at sub-trace levels. Application to the analysis of environmental air contamination and breath samples

A capillary microtrap thermal desorption module is developed for near real-time analysis of volatile organic compounds (VOCs) at sub-ppbv levels in air samples. The device allows the direct injection of the thermally desorbed VOCs into a chromatographic column. It does not use a second cryotrap to focalize the adsorbed compounds before entering the separation column so reducing the formation of artifacts. The connection of the microtrap to a GC–MS allows the quantitative determination of VOCs in less than 40 min with detection limits of between 5 and 10 pptv (25 °C and 760 mmHg), which correspond to 19–43 ng m−3, using sampling volumes of 775 cm3. The microtrap is applied to the analysis of environmental air contamination in different laboratories of our faculty. The results obtained indicate that most volatile compounds are easily diffused through the air and that they also may contaminate the surrounding areas when the habitual safety precautions (e.g., working under fume hoods) are used during the manipulation of solvents. The application of the microtrap to the analysis of VOCs in breath samples suggest that 2,5-dimethylfuran may be a strong indicator of a person's smoking status

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Structuration and branding of a religious tourism product: Catalonia sacra

This article aims to provide an overview of the products Catalonia has to offer in terms of religious tourism. The growing interest in this kind of tourism worldwide, and in Catalonia itself, along with the region's wealth of religious heritage (particularly connected to the Christian Church) contrast with the lack of religion-based tourism products available, which results in its absence from the region's image as a tourism destination. In view of this, the Faculty of Tourism (University of Girona), the Vic Bishopric's Albergueria-Centre for Cultural Dissemination and the Tarraconense Episcopal Conference's Interdiocese Secretariat for the Custody and Promotion of Holy Art (SICPAS) decided to address the situation with the help of funding from the Autonomous Government of Catalonia. In order to re-position Christian religious heritage in the image of Catalonia as a tourist destination, the aforementioned parties embarked upon a project to set up a series of routes throughout the region, branded under the name Catalonia Sacra