Influence of miniscrew dental root proximity on its degree of late stability

Purpose of this study was to evaluate the influence of miniscrew dental root proximity on its late stability degree. 40 miniscrews were inserted between maxillary second premolars and first molars for anterior retraction. Post-surgical radiographs were used to measure the septum width in the insertion site, insertion height, distal and mesial distance from miniscrew to dental root, and the smallest distance between miniscrew and dental root. The miniscrews were divided in two groups according to septum width: ?3 mm (20 miniscrews) and >3 mm (20 miniscrews). The soft tissue in the insertion site, sensitivity during load, plaque around the miniscrew, and evaluation period were also considered. The results showed no significant difference in miniscrew mobility degree and success rate between groups. Miniscrew dental root proximity did not influence the stability and success rate when the distance between the miniscrew and dental root indicated no periodontal ligament invasion. The overall success rate was 90% and no variable was associated with miniscrew failure. Nevertheless, patient sensitivity was frequently associated with some degree of mini-implant mobility. The septum width did not influence the stability and success rate of this anchorage system, but the extreme root proximity did.

Physical activity counseling in primary health care in Brazil: a national study on prevalence and associated factors

Abstract Background The aim of this study was to determine the prevalence and correlates of physical activity counseling among physicians and nurses working in primary health care in Brazil. Methods A phone survey was carried out in 2011 with professionals working in primary health care in Brazil. The target sample consisted of 1,600 randomly selected primary care units covering all regions of the country. We successfully interviewed 529 professionals within the sampled units; 182 physicians and 347 nurses. The overall response rate was 49.6%. Multivariable logistic regression was used to estimate correlates of counseling in the whole sample and separately for physicians and nurses. Results The prevalence of regular physical activity counseling for at least six months was 68.9% (95% CI 64.9; 72.8) and was significantly higher among physicians compared to nurses (p < 0.05). Most professionals (93.2%) interviewed were unfamiliar with current physical activity recommendations for health. In the adjusted analysis, physical activity counseling was more frequent among those who report assessing patient’s physical activity (OR = 2.16; 95% CI 1.41; 3.29), those reporting that lack of time was not a barrier for counseling (OR = 0.62 95% CI 0.42-0.93), those who felt prepared to provide physical activity counseling (OR = 2.34; 95% CI 1.50-3.66), and those working at primary care units offering physical activity programs for patients (OR = 2.06; 95% CI 1.33-3.20). In the stratified analysis, only assessing patient’s physical activity was a significant correlate among physicians whereas assessing patient’s physical activity, feeling prepared to provide counseling and working in units with physical activity interventions were significant correlates among nurses. Conclusions Physicians and nurses deemed physical activity counseling of great importance in primary health care in Brazil. However, in order to increase the quality of counseling and the number of professionals engaging in this activity, these health teams require greater knowledge about physical activity (global recommendations for health) as well as training on the application of instruments for assessing physical activity. Moreover, sufficient time must be allowed during consultations for the counseling process, and physical activity promotion programs should be implemented within the primary health care units.

Modeling random corrosion processes via polynomial chaos expansion

Polynomial Chaos Expansion (PCE) is widely recognized as a flexible tool to represent different types of random variables/processes. However, applications to real, experimental data are still limited. In this article, PCE is used to represent the random time-evolution of metal corrosion growth in marine environments. The PCE coefficients are determined in order to represent data of 45 corrosion coupons tested by Jeffrey and Melchers (2001) at Taylors Beach, Australia. Accuracy of the representation and possibilities for model extrapolation are considered in the study. Results show that reasonably accurate smooth representations of the corrosion process can be obtained. The representation is not better because a smooth model is used to represent non-smooth corrosion data. Random corrosion leads to time-variant reliability problems, due to resistance degradation over time. Time variant reliability problems are not trivial to solve, especially under random process loading. Two example problems are solved herein, showing how the developed PCE representations can be employed in reliability analysis of structures subject to marine corrosion. Monte Carlo Simulation is used to solve the resulting time-variant reliability problems. However, an accurate and more computationally efficient solution is also presented.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Sonno e funzioni cognitive: ruolo della microstruttura del sonno NREM

STUDY OBJECTIVE: Cyclic Alternating Pattern (CAP) is a fluctuation of the arousal level during NREM sleep and consists of the alternation between two phases: phase A (divided into three subtypes A1, A2, and A3) and phase B. A1 is thought to be generated by the frontal cortex and is characterized by the presence of K complexes or delta bursts; additionally, CAP A1 seems to have a role in the involvement of sleep slow wave activity in cognitive processing. Our hypothesis was that an overall CAP rate would have a negative influence on cognitive performance due to excessive fluctuation of the arousal level during NREM sleep. However, we also predicted that CAP A1 would be positively correlated with cognitive functions, especially those related to frontal lobe functioning. For this reason, the objective of our study was to correlate objective sleep parameters with cognitive behavioral measures in normal healthy adults. METHODS: 8 subjects (4 males; 4 females; mean age 27.75 years, range 2334) were recruited for this study. Two nocturnal polysomnography (night 2 and 3 = N2 and N3) were carried out after a night of adaptation. A series of neuropsychological tests were performed by the subjects in the morning and afternoon of the second day (D2am; D2pm) and in the morning of the third day (D3am). Raw scores from the neuropsychological tests were used as dependent variables in the statistical analysis of the results. RESULTS: We computed a series of partial correlations between sleep microstructure parameters (CAP, A1, A2 and A3 rate) and a number of indices of cognitive functioning. CAP rate was positively correlated with visuospatial working memory (Corsi block test), Trial Making Test Part A (planning and motor sequencing) and the retention of words from the Hopkins Verbal Learning Test (HVLT). Conversely, CAP was negatively correlated with visuospatial fluency (Ruff Figure Fluency Test). CAP A1 were correlated with many of the tests of neuropsychological functioning, such as verbal fluency (as measured by the COWAT), working memory (as measured by the Digit Span – Backward test), and both delay recall and retention of the words from the HVLT. The same parameters were found to be negatively correlated with CAP A2 subtypes. CAP 3 were negatively correlated with the Trial Making Test Parts A and B. DISCUSSION: To our knowledge this is the first study indicating a role of CAP A1 and A2 on behavioral cognitive performance of healthy adults. The results suggest that high rate of CAP A1 might be related to an improvement whereas high rate of CAP A2 to a decline of cognitive functions. Further studies need to be done to better determine the role of the overall CAP rate and CAP A3 on cognitive behavioral performances.

Pyrochlore der Pegmatit-Provinz Nazareno, Brasilien

Zusammenfassung:Mit Hilfe einer neuen Formel für die Minerale der Pyrochlor-Gruppe werden sämtliche Endglieder der Na-Ca-Mikrolithe und der Ba-haltigen Mikrolithe aus der Pegmatit-Provinz Nazareno beschrieben: Die Na-reichsten Proben haben nahezu die Idealzusammensetzung eines idealen Pyrochlors, d.h. . Die Ca-reichsten Varietäten weisen maximal auf, wobei der Besetzungsanteil des Ca am A2+ ca. 93% beträgt. Die Ba-haltigen Mikrolithe sind durch eine Defektstruktur gekennzeichnet, wobei für das mögliche Endglied kein Beispiel in den Daten vorliegt. Das Endglied mit dem geringsten Defektcharakter hat folgende Stöchiometrie:

Polymerisierbare und polymere Langmuir-Blodgett-Monoschichten zur gezielten Kalziumcarbonatkristallisation an der Luft-Wasser-Grenzfläche

In der vorliegenden Arbeit konnte mit Hilfe von neu synthetisierten Monomeren und Polymeren Kristallisationstemplate für die Kalziumkarbonatkristallisation dargestellt werden. Hierzu wurde zunächst die Phasenseparation des Monomeren und Polymeren mit der nukleationsfördernden Stearinsäure detailliert untersucht und gezeigt, dass die Monomer und Polymer-Mischsysteme auf Ca(HCO3)2-Lsg. perfekt phasenseparieren. Weiter konnte diese entmischte Struktur mit Hilfe von UV-Bestrahlung in der Monoschicht polymerisiert und damit fixiert werden. Des weiteren konnte gezeigt werden, dass die Kristallisation unter den monomeren und polymeren Bereichen vollständig inhibiert wird und ausschließlich unter den Stearinsäuredomänen von statten geht. Das Problem der Kristallisation in die dritte Dimension, also ins Volumen, konnte durch die Zugabe von Polyacrylsäure zur Subphase kontrolliert werden, so dass nun eine Abbildung der strukturierten Monoschicht durch Kalkkristallisation möglich ist. Im zweiten Teil der Arbeit konnte ein amphiphiles Itaconat synthetisiert werden, welches auf Grund seiner Carbonsäurefunktion ebenfalls nukleationsfördernd wirkt. Auch hier war es möglich die Monoschicht zu polymerisieren. Weiter konnte erneut gezeigt werden, dass es möglich ist mit Hilfe von Polyacrylsäurezusatz die interne Struktur der Membran als Templat für die Kristallisation zu nutzen, so dass auch dieses System zur gezielten Kalkkristallisation genutzt werden kann.

Kristallisation der Arbutin-Synthase und der Strictosidin Glukosidase - zwei Enzyme aus dem sekundären Glykosidstoffwechsel von Rauvolfia serpentina

Kristallisation der Arbutin-Synthase und der Strictosidin Glukosidase - zwei Enzyme aus dem sekundären Glykosidstoffwechsel von Rauvolfia serpentina Die vorliegende Arbeit befasst sich mit der Kristallisation und der strukturellen Auswertung der Arbutin-Synthase (AS) und der Strictosidin Glukosidase (SG). Beide Enzyme stammen aus der Medizinalpflanze Rauvolfia serpentina. Für die Kristallisation der Arbutin-Synthase wurden ca. 2500 verschiedene Beding-ungen experimentell untersucht. Für einige dieser Experimente wurde das Enzym molekularbiologisch und chemisch verändert. Trotzdem konnten keine Kristalle erhalten werden. Die bei diesen Veränderungen erhaltenen Ergebnisse wurden anhand von Vergleichen mit Strukturen anderer Glykosyltransferasen der gleichen Familie analysiert. Bei der Reinigung der AS konnte mit verschiedenen Trennsystemen nie eine homogene Lösung produziert werden. Der wahrscheinliche Grund für diese schlechte Isolierbarkeit, und damit der wahrscheinliche Grund für die schwierige Kris-tallisation, liegt in der überdurchschnittlich hohen Anzahl an Cysteinen in der Proteinsequenz. Mit den Aminosäuren Cys171, Cys253 und Cys461 wurden drei Cysteine gefunden, die einem Strukturvergleich nach an der Proteinoberfläche liegen und möglicherweise durch Quervernetzungen mit anderen Proteinmolekülen ein heterogenes Gemisch bilden, das nicht geordnet kristallisieren kann. Durch gezielte Mutationen dieser drei Aminosäuren könnte die Kristallisation zukünftig ermöglicht werden. Für die SG waren bereits Bedingungen bekannt bei denen nicht vermessbare Enzymkristalle (Nadeln) wuchsen. In weit gefächerten Versuchen konnten diese Kristalle jedoch nicht zu 3D-Wachstum angeregt werden. Es wurden mit einem HTS-Screening neue Bedingungen zur Kristallisation gefunden. Anschließend konnten die native Struktur und der Strictosidin/Enzym-Komplex vermessen und aufgeklärt werden. Die SG gehört zur Familie 1 der Glukosidasen (GH-1) und besitzt die in dieser Familie konservierte (beta/alpha)8-Barrel-Faltung. Im Vergleich mit 16 bekannten Glykosidasen der Familie GH-1 wurde die Substratbindung untersucht. Dabei wurde die in der Familie konservierte Zuckerbindung vorgefunden, jedoch große Unterschiede in der Aglykonbindung entdeckt. Es wurden Bedingungen für die Konformationsänderung des Trp388 erkannt. Diese Konformationsänderung dirigiert den Aglykonteil des Substrates auf verschiedene Seiten der Substratbindungstasche und teilt so die Familie GH-1 in zwei Gruppen.

Helix-coil-transition in solid polypeptides

Abstract Poly(L-glutamic acid) (PLGA) was synthesized by living anionic ring-opening polymerization of the NCA monomer, which was obtained by reacting diphosgene with an amino acid derivative. The chemical structures and thermal properties were characterized by 1H-NMR, 13C-NMR, TGA and DSC. XRD powder patterns found to be amorphous for all polymers obtained. The molecular weights could be determined under severe limitations due to low solubility and high aggregation tendency. The secondary structure of the PLGA films was analyzed in the solid state by IR spectroscopy; the order was determined mainly by XRD. Uniform bulk films (1-5 µm) were produced by drop-casting of PLGA solutions in TFA on silica. The XRD film analysis indicated the absence of a long range order or an orientation even if a helical microstructure was confirmed by IR spectroscopy. The coil solvent TFA delivered constantly a helical or a β-sheet structure in the solid state depending on the water content of the solvent which was observed for the first time to exhibit a high influence on the crystallization process for PLGA. Temperature dependent in-situ IR measurements were examined to analyze if a helix-coil transition occurs, but there could be no solvent system determined, which resulted in a disordered coil structure in the solid state. General parameters like solvent systems, evaporation conditions, concentration, substrates etc. were analyzed. New crystallizations were obtained on silica prepared by drop-casting of solutions of PLGA in DMF, DMA, TMU, NMP, and pyridine/water mixtures, respectively. PSCBC in DMF, CDCl3/TFA-d, and PSBC in CDCl3/TFA-d exhibited the same crystalline diffraction patterns like PLGA. The long range order in the X-ray diffraction pattern is proven by extremely sharp crystalline signals, which are not changing the shape or the position of the peak by increasing the temperature up to 160°C. The substrate seems to play a decisive role because the crystalline structures were not obtainable on glass. The crystal structure consists probably of two different layered structures based on the intensity ratios of the two series of crystalline signals in the X-ray diffraction patterns. The source of the layered structure remains unclear and needs further studies to investigate the spatial arrangement of the chains in more detail. The secondary structure was still not changing upon heating even if a highly crystalline diffraction pattern occurs. Concluding that even the newly investigated crystallization did not show a helix-coil transition in the solid state by annealing, the phenomenon known in solution has to be claimed as unachievable in the solid state based on the results of this work. A remaining open question represents the observation that the same crystalline pattern can be reproducibly prepared with exhibiting two different ordered secondary structures (helix and β-sheet). After the investigation that the evaporation time cannot be decisive for the crystal growth, the choice of a strong hydrogen bonding interrupting solvent is most probably the key to support and induce the crystallization process.

Numerical investigation of turbulent/non-turbulent interface

The subject of this work is the diffusion of turbulence in a non-turbulent flow. Such phenomenon can be found in almost every practical case of turbulent flow: all types of shear flows (wakes, jet, boundary layers) present some boundary between turbulence and the non-turbulent surround; all transients from a laminar flow to turbulence must account for turbulent diffusion; mixing of flows often involve the injection of a turbulent solution in a non-turbulent fluid. The mechanism of what Phillips defined as “the erosion by turbulence of the underlying non-turbulent flow”, is called entrainment. It is usually considered to operate on two scales with different mechanics. The small scale nibbling, which is the entrainment of fluid by viscous diffusion of turbulence, and the large scale engulfment, which entraps large volume of flow to be “digested” subsequently by viscous diffusion. The exact role of each of them in the overall entrainment rate is still not well understood, as it is the interplay between these two mechanics of diffusion. It is anyway accepted that the entrainment rate scales with large properties of the flow, while is not understood how the large scale inertial behavior can affect an intrinsically viscous phenomenon as diffusion of vorticity. In the present work we will address then the problem of turbulent diffusion through pseudo-spectral DNS simulations of the interface between a volume of decaying turbulence and quiescent flow. Such simulations will give us first hand measures of velocity, vorticity and strains fields at the interface; moreover the framework of unforced decaying turbulence will permit to study both spatial and temporal evolution of such fields. The analysis will evidence that for this kind of flows the overall production of enstrophy , i.e. the square of vorticity omega^2 , is dominated near the interface by the local inertial transport of “fresh vorticity” coming from the turbulent flow. Viscous diffusion instead plays a major role in enstrophy production in the outbound of the interface, where the nibbling process is dominant. The data from our simulation seems to confirm the theory of an inertially stirred viscous phenomenon proposed by others authors before and provides new data about the inertial diffusion of turbulence across the interface.

Ergebnisse der Behandlung mit Kortikalisschrauben

Im Rahmen der vorliegenden Dissertation wurden 106 Minipins bei 62 Patienten (29 Männer und 33 Frauen)untersucht.rnÜberlebensrate betrug 76,4%. Misserfolge, die zum Verlust der Minipins führten wie Mukositis, Lockerung oder Wurzelperforation, stellten sich in 23,7 % (n=25) der Fälle ein. Dabei gingen beim Auftreten von Mukositis 9 von 14 (8,5 %), bei der Lockerung der Minischrauben 8 von 10 (7,5 %) der Minischrauben verloren. Eine Wurzelperforation trat in einem Fall auf. rnDie einzige lingual im Unterkiefer implantierte Schraube ging verloren. Implantation palatinal im Oberkiefer führte in zwei von vier Fällen zum Verlust. rnDie Sofortbelastung der kieferorthopädischen Kortikalisschrauben erscheint ein praktikables Belastungskonzept zu sein.rnDie Verlustraten bei der vestibulären Implantation betrugen 3,8 % (n=4) für den Oberkiefer und 15,1 % (n=16) für den Unterkiefer.rnBei der Implantation in befestigte bzw. unbefestigte Mukosa betrug die Überlebensrate entsprechend 83,3 % (n=72) und 62,3 % (n=22). rn

Morphological instability analysis of a misfit strained core-shell nanowire for the growth of quantum dots

Nell'ambito delle nanostrutture, un ruolo primario è svolto dai punti quantici. In questo lavoro siamo interessati all'analisi teorica del processo di creazione dei punti quantici: esso può avvenire per eteroepitassia, in particolare secondo il metodo studiato da Stranski-Krastanov. Un film di Germanio viene depositato su un substrato di Silicio in modo coerente, cioè senza dislocazioni, e, a causa del misfit tra le maglie dei due materiali, c'è un accumulo di energia elastica nel film. A una certa altezza critica questa energia del film può essere ridotta se il film si organizza in isole (punti quantici), dove la tensione può essere rilassata lateralmente. L'altezza critica dipende dai moduli di Young (E, υ), dal misfit tra le maglie (m) e dalla tensione superficiali (γ). Il trasporto di materiale nel film è portato avanti per diffusione superficiale. Il punto focale nell'analisi delle instabilità indotte dal misfit tra le maglie dei materiali è la ricerca delle caratteristiche che individuano il modo di crescita più rapido dei punti quantici. In questo lavoro siamo interessati ad un caso particolare: la crescita di punti quantici non su una superficie piana ma sulla superficie di un nanofilo quantico a geometria cilindrica. L'analisi delle instabilità viene condotta risolvendo le equazioni all'equilibrio: a tal fine sono state calcolate le distribuzioni del tensore delle deformazioni e degli sforzo di un nanofilo core-shell con una superficie perturbata al primo ordine rispetto all'ampiezza della perturbazione. L'analisi è stata condotta con particolari condizioni al contorno ed ipotesi geometriche, e diverse scelte dello stato di riferimento del campo degli spostamenti. Risolto il problema elastico, è stata studiata l'equazione dinamica di evoluzione descrivente la diffusione di superficie. Il risultato dell'analisi di instabilità è il tasso di crescita in funzione del numero d'onda q, con diversi valori del raggio del core, spessore dello shell e modo normale n, al fine di trovare il più veloce modo di crescita della perturbazione.

Polykation-DNA-Komplexe : Eigenschaften und Anwendung in der Gentransfektion

Polykationen bilden mit DNA spontan Komplexe. Triebkraft ist der Entropiegewinn durch Freisetzung der Gegenionen auf den Polyelektrolyten. Solche Komplexe können in der Gentechnik verwendet werden, um fremde DNA in eine Zelle einzuschleusen. Dies bezeichnet man als Gentransfektion. In dieser Arbeit werden erstmals bürstenförmige Polykationen mit wurmförmiger Topologie zur Gentransfektion verwendet. Dazu wurde die Komplexierung von DNA mit Bürstenpolymeren mit Poly-L-Lysin- und Polyvinylpyridinium-Seitenketten und linearen Polykationen untersucht. Die Komplexbildung verläuft in allen Fällen kinetisch kontrolliert, alle Polykationen bilden sphärische Komplexe, die Topologie hat keinen Einfluss auf die Komplexgröße. Komplexe aus Bürstenpolymeren transfizieren mehr als 25% der gesamten Zellpopulation bei Schweinehirnendothelzellen. Gegenüber dem kommerziellen Transfektionsmittel Lipofektamin konnte eine deutliche Steigerung um bis zu 400% erreicht werden. Komplexe, die mit linearen Analoga gebildet wurden, zeigten bei gleicher Komplexgröße Transfektionsraten unter 5%. Freisetzungsversuche zeigen, dass die Komplexe, die gut transfizieren, recht labil sind, also die DNA unter Kompetitoreinfluss freisetzen können. Stabile Komplexe haben geringe Transfektionseffizienzen. Ebenso wichtig ist der Schutz der DNA vor Abbau durch DNase. Die PVP-Bürste bietet als einziges der untersuchten Polykationen diesen Schutz und zeigt auch die besten Transfektionsraten. Zusätzlich zu der medizinischen Anwendung wurde die Kinetik der Komplexbildung untersucht. Dazu wurde ein spezieller Aufbau entwickelt, der es ermöglicht die Streuintensität der Komplexlösung bei kleinen Streuwinkeln zeitaufgelöst im Millisekundenbereich zu detektieren. Die Komplexbildung verläuft diffusionskontrolliert, im Bereich von Ladungsverhältnissen (positive zu negativen Ladungen) von 1.8 bis 4.0 schließt sich ein fraktales Wachstum an.

Ergodicity and regularity of invariant measure for branching Markov processes with immigration

In this thesis we consider systems of finitely many particles moving on paths given by a strong Markov process and undergoing branching and reproduction at random times. The branching rate of a particle, its number of offspring and their spatial distribution are allowed to depend on the particle's position and possibly on the configuration of coexisting particles. In addition there is immigration of new particles, with the rate of immigration and the distribution of immigrants possibly depending on the configuration of pre-existing particles as well. In the first two chapters of this work, we concentrate on the case that the joint motion of particles is governed by a diffusion with interacting components. The resulting process of particle configurations was studied by E. Löcherbach (2002, 2004) and is known as a branching diffusion with immigration (BDI). Chapter 1 contains a detailed introduction of the basic model assumptions, in particular an assumption of ergodicity which guarantees that the BDI process is positive Harris recurrent with finite invariant measure on the configuration space. This object and a closely related quantity, namely the invariant occupation measure on the single-particle space, are investigated in Chapter 2 where we study the problem of the existence of Lebesgue-densities with nice regularity properties. For example, it turns out that the existence of a continuous density for the invariant measure depends on the mechanism by which newborn particles are distributed in space, namely whether branching particles reproduce at their death position or their offspring are distributed according to an absolutely continuous transition kernel. In Chapter 3, we assume that the quantities defining the model depend only on the spatial position but not on the configuration of coexisting particles. In this framework (which was considered by Höpfner and Löcherbach (2005) in the special case that branching particles reproduce at their death position), the particle motions are independent, and we can allow for more general Markov processes instead of diffusions. The resulting configuration process is a branching Markov process in the sense introduced by Ikeda, Nagasawa and Watanabe (1968), complemented by an immigration mechanism. Generalizing results obtained by Höpfner and Löcherbach (2005), we give sufficient conditions for ergodicity in the sense of positive recurrence of the configuration process and finiteness of the invariant occupation measure in the case of general particle motions and offspring distributions.

From defined polymer architectures to structure-property relationships in vivo

Makromolekulare Wirkstoffträgersysteme sind von starkem Interesse bezüglich der klinischen Anwendung chemotherapeutischer Agenzien. Um ihr klinisches Potential zu untersuchen ist es von besonderer Bedeutung das pharmakokinetische Profil in vivo zu bestimmen. Jede Veränderung der Polymerstruktur beeinflusst die Körperverteilung des entsprechenden Makromoleküls. Aufgrund dessen benötigt man detailliertes Wissen über Struktur-Eigenschaftsbeziehungen im lebenden Organismus, um das Nanocarrier System für zukünftige Anwendungen einzustellen. In dieser Beziehung stellt das präklinische Screening mittels radioaktiver Markierung und Positronen-Emissions-Tomographie eine nützliche Methode für schnelle sowie quantitative Beobachtung von Wirkstoffträgerkandidaten dar. Insbesondere poly(HPMA) und PEG sind im Arbeitsgebiet Polymer-basierter Therapeutika stark verbreitet und von ihnen abgeleitete Strukturen könnten neue Generationen in diesem Forschungsbereich bieten.rnDie vorliegende Arbeit beschreibt die erfolgreiche Synthese verschiedener HPMA und PEG basierter Polymer-Architekturen – Homopolymere, Statistische und Block copolymere – die mittels RAFT und Reaktivesterchemie durchgeführt wurde. Des Weiteren wurden die genannten Polymere mit Fluor-18 und Iod-131 radioaktiv markiert und mit Hilfe von microPET und ex vivo Biodistributionsstudien in tumortragenden Ratten biologisch evaluiert. Die Variation in Polymer-Architektur und darauffolgende Analyse in vivo resultierte in wichtige Schlussfolgerungen. Das hydrophile / lipophile Gleichgewicht hatte einen bedeutenden Einfluss auf das pharmakokinetische Profil, mit besten in vivo Eigenschaften (geringe Aufnahme in Leber und Milz sowie verlängerte Blutzirkulationszeit) für statistische HPMA-LMA copolymere mit steigendem hydrophoben Anteil. Außerdem zeigten Langzeitstudien mit Iod-131 eine verstärkte Retention von hochmolekularen, HPMA basierten statistischen Copolymeren im Tumorgewebe. Diese Beobachtung bestätigte den bekannten EPR-Effekt. Hinzukommend stellen Überstrukturbildung und damit Polymergröße Schlüsselfaktoren für effizientes Tumor-Targeting dar, da Polymerstrukturen über 200 nm in Durchmesser schnell vom MPS erkannt und vom Blutkreislauf eliminiert werden. Aufgrund dessen wurden die hier synthetisierten HPMA Block copolymere mit PEG Seitengruppen chemisch modifiziert, um eine Verminderung in Größe sowie eine Reduktion in Blutausscheidung zu induzieren. Dieser Ansatz führte zu einer erhöhten Tumoranreicherung im Walker 256 Karzinom Modell. Generell wird die Körperverteilung von HPMA und PEG basierten Polymeren stark durch die Polymer-Architektur sowie das Molekulargewicht beeinflusst. Außerdem hängt ihre Effizienz hinsichtlich Tumorbehandlung deutlich von den individuellen Charakteristika des einzelnen Tumors ab. Aufgrund dieser Beobachtungen betont die hier vorgestellte Dissertation die Notwendigkeit einer detaillierten Polymer-Charakterisierung, kombiniert mit präklinischem Screening, um polymere Wirkstoffträgersysteme für individualisierte Patienten-Therapie in der Zukunft maßzuschneidern.rn